"Run As Administrator" Privileges?
Jul 7, 2010Could someone define exactly what elevated privileges a program gets when it is "Run as Administrator"?
Or point me at a suitable web page. Relevant tutorial here: Run as Administrator
ADVERTISEMENT
Administrator Privileges In Windows 7?
May 13, 2011I've searched a number of other forums, looked under Admin privileges in the search panel, checked through the other threads as far as I could, and checked references to Naturally Speaking but cannot find a solution to this problem. I'm not at all technical so will need word of one syllable aI had a local company build me a new computer. I installed windows 7 on the blank disc with just one single user (me) who was classed as administrator. Until recently it worked fine. I installed Naturally Speaking on it and set up a profile. It worked fine from the initial session after installation but, after it had been closed, whenever I tried to restart it the program would load but any attempt to load my profile got the error message: The user file you have selected cannot be accessed. This could be because you do not have sufficient privileges to use it or because it is being accessed by another program."
Attempting to run the program as an administrator gets the message that it cannot be run in enhanced mode. I contacted Nuance (who make NS) and had a long correspondence with them.had no effect.After uninstalling and reinstalling a couple of times and ending up with the same result, I uninstalled it and ran a removal program from Nuance to clear every trace of it. Just recently - to solve a problem with windows that recently appeared - I reinstalled Windows 7 using the update facility on the Win7 installation disc. This worked fine and once again I only had the one single user who had administrator status. There were no working guest or other users.I tried Naturally speaking again with the same result. Once again I completely removed it from the system. I then set up a new user with Administrator privileges. Going into that user I installed NS again. This time it worked fine. I can start it from that user and it works well. If I go to the first user screen there is also an icon for Naturally Speaking but once again, if I start it I can't load my profile with the error message above.
It's not particularly convenient if I have to switch users to use NS. It all seems to be to do with Win 7 Administrator status. Can anyone suggest a way that the original Administrator (me) can get the same administrator privileges as the second user seems to have under his administrator status. It seems a ridiculous situation that one user can use it while the other can't.Sorry to have rambled on but I was trying to give as complete a picture as possible.[CODE]
Unable To Use Administrator Privileges?
Mar 28, 2012I own an hp touchsmart 310-1020 pc running windows 7 home premium 64 bit. I was trying to sync my iPad 2 to iTunes via USB, but iTunes kept freezing up as soon as I clicked on any function. So I tried to repair it via apple's iTunes download. That didn't work as I still had the same issue. So I uninstalled it. And then tried to reinstall it. It downloaded just fine, but when it tries to install it pops up with a message saying "You do not have sufficient privileges to complete this installation for all users of the machine. Log on as an administrator and then retry this installation." My problem is that I am logged in as the administrator, and as such should have full privileges. How do I check that?
View 2 Replies View RelatedGuest Account Has Administrator Privileges?
Mar 31, 2011I don't know how, but my 13-yo daughter somehow managed to change the name of the Guest account on my notebook (running Win7 Home Premium) to "NomNomMonster" and give it administrator privileges. When I turn the Guest account off, the name shown reverts to "Guest", but when I turn it back on, the name is once again "NomNomMonster" and shows administrator privileges. how to restore the Guest account to its normal name and status?
View 4 Replies View RelatedAdministrator Account Does Not Have Full Privileges
Apr 16, 2011This is a new computer (laptop) with 7 Pro. The Administrator account has full privileges, but if I try to create a new account with administrator privileges, it does not have the full privileges--i.e., its a though its a more limited account even though it says its an administrator account. I have checked and there does not seem to be any fix for this except reinstalling windows--although this computer just came with OEM and I don't have a CD. Any way to correct it?
View 14 Replies View RelatedMain (And Only) Account Not Having Administrator Privileges
Dec 30, 2010Basically if I wanna change settings or install things, I cannot. It says I need to be the administrator, I have no clue why my account changed to standard. Here's what I've tried to resolve my problem, but it has not worked.
- Control Panel> User Accounts> Change Your Account Type> Admin.> Select
Didn't work and when I go back to it, it still says standard.
- Run> netplwiz> Name of Account> Admin> Access denied
How to fix this so my only account can be an admin?
Windows 7 - Administrator Privileges To Deny For All
Apr 18, 2012While attempting to set up a new computer on our network I seem to have lost access to many documents and lost permission to many folders. While setting up a new computer we began playing with what programs and documents the new computer could access. (The new machine is to be used for clients, and for internet/printing privileges) we did not want the computer to access anything on the network except the printer.
We did the above by right clicking on the public folders where we kept our documents, opening the security tab and restricting the permissions. We would then deny the new computer access via the ownership tab. This seemed to work as the new computer on the network had no access to our files but could still print to the printer on the shared network. I wasn't on the computer at the time, (my lackey status didn't permit as such) and I think somehow the other person managed remove our access to the programs/documents.
I think they did this by changing the admin privileges to deny for all. I am guessing that's what happened because now when I try and take ownership of the files I am unable to open them. It will let me take ownership of the files but then still says me access is denied when I try to open any of the selected files of documents. (does not prompt for password). In short, Is there a way to reestablish my admin privileges after what appears to be simple mistake on which account was selected?
Can't Install Tascam It Says Must Have Administrator Privileges
Dec 27, 2011I am he administrator and when i try to install it, it Say i must have administrator priviliges to install drvier then it closes.
View 7 Replies View RelatedWhy Doesn't Local Administrator Group Have Full Administrator Rights
Feb 22, 2010A little background and info: I support a number of people who for one reason or another need to be able to do things a local admin can do like install programs and start services (or more accurately allow a program they're running to start a service). All users are in the local administrators group. The local admin account is enabled (and renamed) so that we as administrators have local access when the machine comes in for service. The machines are joined to a AD domain so that we can control a lot of the security via GPO. Everything worked fine in XP.
We are getting a few different "you do not have permission" errors. When the user tries to run OpenAFS (which starts a service) they get a "you do not have permission" error. There is no way around this error.
Also, when the users try to run Lotus Notes they get a "you do not have permission" error. When we go into compatibility mode and check the "run as administrator" (or just right click and "run as administrator) it works fine, but they have to click the elevated privileges. The program was installed while logged in as the user.
Again, all users are members of the local administrators group. When the local admin account logs in all these programs run fine. This behavior started in Vista and I chalked it up to "vista sucks". Windows 7 so far seems to be great, except that like in vista, members of the local administrators group are not really local administrators. How do I make them true local administrators?
Drag & Drop Works For Hidden Administrator But Not For Administrator User?
Feb 14, 2011I use an old XP app (JetToolbar - available at JetToolBar - Free software downloads and software reviews - CNET Download.com) and do not want to change but I cant make it work on Windows 7. The application installs and starts up just fine but it is not possible to drag icons/programs/files to the toolbar - I just get the 'no entry' sign (Circle with line through)However, the application runs fine when logged on to the hidden Administrator account. If I set up the application in the hidden Admin account and then log on as a normal admin user and run it from that account, the icons I set up are just not visible.So what do I have to change in my normal user account (member of administrators) to make this drag and drop work?I have tried 'Run as administrator' but that made no difference. Ive read about dropping to 'Run as User' apps from 'Run as Admin' apps but that's not the problem (at least problem occurs when app is run as user or run as admin)
View 9 Replies View RelatedRenaming The Administrator Account Back To Administrator?
Dec 28, 2011I have an Acer laptop which came with one user account, Acer, with the administrator right. When I tried to rename it to Administrator or administrator, I got an messages saying that user name has already existed
View 1 Replies View RelatedCan't Get Administrative Privileges
May 11, 2012My uncle recently purchased an Acer Aspire One computer, but they (walmart) did not switch the administrative rights over to him and it is still under their control. I can not access anything and it's annoying I tried system config and the password is valid, but they disabled programs and features.
View 11 Replies View RelatedHow To Get Around Adim Privileges
Jun 17, 2012I have Windows 7 Pro, and I need to get around the setup of minimal downloads, even from Microsoft. I need to get around the admin priviliges. How do I do it?
View 3 Replies View RelatedAdmin Privileges Gone
Dec 7, 2011After setting up the Christmas tree the other night our breaker was thrown. After starting Windows up I no longer have admin privileges. Worse yet, no user does. Also, from my log in screen only one user is shown (the previous admin account). If I type other users names and passwords I can access them.
Since I can't change anyone's privileges above my own, what do I do?
Getting Around The Admin Privileges
Jan 28, 2012I know what this sounds like. Before you ban or block or post some smartass remark, hear me out. I'm trying to get around an adminstrator password on my work computer so I can install a couple of useful apps. Before I joined the company, most of the computers were fairly open. About a year ago, they hired an empolyee who took advantage of this an installed personal liscense software on her work computer for work-related use. Obviously this is illegal and the employee was warned. The employee persisted and eventually the company locked the computers down so that you could not install without administrator privileges. This applied to old and new employees. I started about 2 months ago and was given a locked computer. Shortly thereafter the employee who caused the lock down policy left for another position. During this time I began experiencing issues with my computer. This person explained why the computers were locked down when I expressed that it would waste less of his time if the computer wasn't locked. He then said, "Of course you know that there is a workaround right? You just need a windows boot disk. Then you don't need the password." This was the wink, wink, nudge, nudge way of saying as long as you don't do something stupid it's unofficially ok. My question is, is this true, can I use a boot disk and not have to get an admin password to install a program? I'm not looking to install pirated software or software that I own a personal liscense for, I'm looking to install useful tools such as CPU-Z or something similar and to make enhancements such as increasing the page file size. If it's true, how do I go about it? Are there other ways to achieve the same ends?
View 13 Replies View RelatedGetting Around The Admin Privileges?
Jun 7, 2012want to install office 2007 on win7 , but as administrator I can not. it will run until it's says you do not have privileges.have set system to fullcontrol and also administrator to fullcontrol with the same response
View 6 Replies View RelatedAdmin Has No Sufficient Privileges?
May 3, 2011A virus, downgraded all my Privileges even though I'm set as Administrator. In order to fix my computer, I first need to reset all Privileges back to their defaults. The first "solution" said to install "subinacl.msi", and then run a cmd batch that calls subinacl.exe. Problem here is that "subinacl.msi" attempts to install to the System32 folder... which I naturally no longer have permission to access. Catch-22.
The second "solution" said to use "Takeown" to retake ownership of specific files & folders. But I don't have "Permission" to run "Takeown" either from the CLI. The third "solution" says to create the "hidden" Administrator account via "net user administrator /active:yes", but (you guessed it), I don't have "permission" to do that either. How to get my permissions back?
Changing App To Admin Privileges?
Dec 18, 2011Im trying to make it so that my son has the capability to run a program using admin, and only that one program, is there anyway to do that so i don't have to constantly put my password in to allow him to play?
View 2 Replies View RelatedPrivileges Of A Standard User
May 20, 2012I am running Windows 7 Home Premium 64-bit and I have a problem regarding User Accounts.Let's say I am account A on this computer. This is an administrator account without a password. When I went into the control panel,I demoted Account B to a standard user. Apparently, however, account B can simply change this setting even though she is a standard user. Is this true? Even when I set a password for my account, account B can still bypass it or demote me. Why is this?
View 8 Replies View RelatedMissing Privileges For Registry Key?
Jan 15, 2013I'm trying to use the program "Dragon Tag", where the program will start MS-Excel, and here put an add-in into the menu. However, I get the below error, where I seemingly do not have the needed privileges. Tried to remedy this without succes, but then I tried to run the program being logged in as the administrator, but got the same error. If the administrator cannot do this, how should any other user then?
Dragon Tag cannot verify the required Word/Excel configuration or adjust it (if required)because your user account does not have the privileges to read or update the registry key HKEY_CURRENT_USERSoftware\Microsoft\Office\Excel\Addins\DTStartupShim.Connect.
Adjust your system's security to allow this access for configuration verification and adjustment and then restart Dragon Tag.
Get Sufficient Privileges Windows 7?
Nov 11, 2009how to get sufficient privileges windows 7
View 16 Replies View RelatedLost Explorer.exe, Msconfig,adm Privileges
Sep 27, 2012last 7 days can not use msconfig or explorer.exe also my computer icon does not responds, actually when I tried to use anyone of these commands the program "load" but only for milliseconds and back to the desktop; I tried many things like AVG and malaware both report no infections I use safe boot and run sfc/scannow and no solution?
View 8 Replies View RelatedRunning Computer As Someone Without Admin Privileges?
Oct 7, 2012Sony Vaio laptop/Windows 7
Windows 7 Service Pack 1 x64 NTFS
Internet Explorer 9.0.8112.16421
Firefox 15.0.1
avast! free antivirus; Spyware Blaster free.
Also for non-real time protection but for a 2nd opinion, sometimes do a scan with MBAM or Super AntiSpyware.And after learning about it thru this site, currently doing a free online ESET scan, which the one other time I used it found junk that none of the other programs did.I saw an article stating that most problems involving keyloggers, trojans, scareware, etc., could be prevented by my running my computer as someone without Administrative privileges - that this would prevent most programs from being able to take control, even if I unknowingly clicked on a downloader for a trojan/keylogger.I am in the USA and interested in some non-USA sports, so use free streaming sites a lot which sometimes contain various types of malware.I try to be careful, but occasionally, as tonight, I have to do a System Restore when scareware gets a program into my computer.
[Far Cry 3] Error: Insufficient Access Privileges?
Jan 17, 2013I bought "Far Cry 3" through Steam.I have been getting the error message: "You do not have sufficient access privileges to run the game. Please contact your administrator."Since then I have been trying to fix this issue several hours everyday, opened a support ticket with both Ubisoft and Steam. However no matter what I have done the error is still the same.I have tried to: Run the game as "hidden administrator". Given ownership of "C:" to myself. Changed Steam.exe, farcry3.exe, farcry3_d3d11.exe, Uplay.exe and UbisoftGameLauncher.exe to "Run as administrator" for every user. I have given "Full Control" to "Everyone, SYSTEM, Users (MyComputerNameusers) and Administrator (MyComputerNameAdministrators)" in the Steam and Ubisoft folders. I let Steam, Uplay and Far Cry 3 through the HIPS function (eset nod32). I always have UAC turned off
View 9 Replies View RelatedSystem Hangs When Asking For Admin Privileges
Mar 15, 2011I have an annoying issue and it only happens about half the time my computer is turned on. When I run a program in "admin mode", the screen goes black and hangs for about 5 seconds, the prompt comes up asking me to approve, I click yes, screen goes black for another 5 seconds then the program comes up. This also happens sometimes when I wake the computer from the screensaver. I also happens when I try to open task manager. With the specs of my computer, there's no reason this should be happening. The computer is only 2 months old. I have run CHKDSK, did sfc /scannow, all are supposedly clean now. I checked my registry for errors, repaired those. Ran an AVG scan, also clean. My graphics drivers are up to date. All of my other drivers should be up to date as well. If I go into the device manager, there are no dreaded "!" icons next to any devices.
View 3 Replies View RelatedAdmin Privileges In Batch Script?
Jun 6, 2011I wrote a Script that uninstalls an application, move some files and install an Application.The Script is working if I start it as Admin (right click - run as Admin ...).Everything works fine.But I want to have it working without the "run as".The script is only used in a separated Test system, so there is no problem if the Admin user name and password is in the script.(also link wouldn't work, should also work if it moves to another station within the test domain)
View 6 Replies View RelatedDeny Printing Privileges From Certain Programs?
May 31, 2012She was saying that the person who's computer I was replacing uses there shared HP Deskjet 6540 to print most documents when really it should only be used to print one type: 'lables.docx.'
So this got me wondering whether it were possible or not to deny printing rights to the 6540 from applications such as Outlook - whilst keeping them in word and program 'x' but also allowing Outlook to print to other printers in the office.
Now I think even before asking that this is probably not possible but I need to know either way.
Network Configuration Operators Privileges?
Jun 15, 2012Member of this Group which type of privilegs have
View 2 Replies View RelatedTelecharger Privileges Sufficient Windows 7
Oct 27, 2012telecharger privileges sufficient windows 7
View 1 Replies View RelatedAllow User On Another Computer Admin Privileges Over A Net
Jan 4, 2013I'm trying to allow a user account on my win 7 home laptop admin rights on my win 7 professional desktop so i can send it admin level commands over command prompt and generally do more when file sharing.
Both computers have an account called "Me" on them with exactly the same password.
The computer running win 7 professional is called ME-DESKTOP, and the computer running Win 7 home is called ME-LAPTOP. I heard that setting the usernames and passwords to the same should work on some other forums, but i get the feeling that was referring to computers both running win 7 home, as it has evidently not worked here.
I think the problem is I've got to add \ME-LAPTOPMe to the administrators group on ME-DESKTOP but i can't find how to as when i try and add a new location it won't find ME-LAPTOP for me to select even though ME-LAPTOP has network discovery turned on.
Lost Admin Privileges - Cannot Use Windows Update / UAC Off
Oct 30, 2010I seem to have lost admin rights/privileges on my account, even though it says I am an admin. I can't use windows update because of the following message. UAC is off. I created another account and swapped admin privileges to that, and everything was ok, but as soon as I swap the privileges back to my original account, i get various 'this action requires admin rights' etc. I don't want to keep logging into another admin account just so I can use windows update.
View 7 Replies View Related