OK, this may not be possible, bit I can but ask. I have a backup image of my system (which for some reason will not restore). I am running Microsoft Office 2010 on Windows XP. Is there a way for me to retrieve my safe senders list from the backup image (I can explore it)?
View 1 Replies
How do I retrieve my contact list
View 1 Replies View RelatedI created an image using the Microsoft Backup and Restore tool in Windows 7. I saved the image on a network shared folder.I then went to the Advanced Recovery Methods in Windows to restore my image...that I just created. It restarts the computer and goes into recovery mode, I point to where the image is located, I entered the network credentials and it give me an error. "The Specified network resource or device is no longer available. (0x80070037)"
View 5 Replies View RelatedHow to Create a System Image Backup in Windows 7 ?
View 0 Replies View RelatedI need a little help figuring this out. I made a backup image a while back on my network. Now that I want to re-image, I reboot as requested, wait for it to load, and Windows says it can't find my backup, "if it is on a network, close this window , type the network location."Putting in the network location does nothing, I'm just returned to the screen where it would list the backup image if it had found it, but there's nothing there.Thinking perhaps my NAS was the problem I copied the image onto a portable hard drive, but after rebooting into the restore program, Windows 7 doesn't find the USB drive.
View 9 Replies View Relatedif i do a back up image of my C drive can i then create a partition on the that HDD and then create a second OS using that image of C drive?
hope that makes sense
also can you update images or would you need to create new ones to keep them upto date?
I have family members who aren't very computer savvy but somehow get to the sites they shouldn't have, like to click on links they don't even understand (thus gets infected with viruses etc). I set up a limited windows 7 account for them, browser of choice is IE9, and I need software where I can make list of safe sites they can visit. all other sites should be blocked until added to that list. As I said before they aren't very computer savvy so I don't need something that is hack proof or anything. There is microsoft Family Safety in windows live essentials is that any good for this purpose? Is there any alternatives?
View 1 Replies View RelatedI have a networked shared USB connected HD on PC 1 that works fine on PC 1. However when I tried to setup MS Backup for the first time on PC 2, it does not list the external HD called Drive "L". When I open COMPUTER on PC 2, the external drive is shown. Drive "L" is also set for ALL USERS, and shared label is indicated on PC 1. So the million dollar question is, why doesn't it show on the list of available drives to select for backup on PC 2? Also, there isn't any way in the backup setup screen to browse or search for any drives.
View 1 Replies View RelatedI have a SanDisk Extreme SSD, 120MB, as my drive "C" dedicated to the OS and programs. I tried to use [COLOR=blue !important][COLOR=blue !important]Acronis [COLOR=blue !important]True[/COLOR][/COLOR][/COLOR] Image to make an image backup to two different drives on my system. In both cases it failed and trashed the hard drives.
View 4 Replies View RelatedI am attemptin to make a backup image of my hard drive. The new Image will be complied on an external hard. The drive has a 1TB Capacity with 450 Gigs free. I am receiving an error code during the image compilation stating that there is a problem with the I/O device. I ran chkdsk and found no problems. I also switched USB ports just to rule that out. I have used this same external hard drive to image a different laptop with no issues last week. My next approach would be to try this in safe mode. When I am in safe mode, I cannot find the location of the software which windows uses to create the image. I typed the location into the address bar and it pulled up a link in the address bar which took me back to the control panel. Can anyone tell me if this is possible to do in safe mode and if not, what my next step would be. Windows error: The Operation failed due to a device error encountered with either the source or destination. If the source or destination volume is on a disk, run CHKDSK/R on the source or destination volume and then retry the operation. (0x8078012D) Additional Information: The request could not be performed because of an I/O device error (0x8007045D)?
View 2 Replies View RelatedThe other day I did a WindowsImageBackup,put it on the (I) drive. Right after the back up my desktop icons wont stay in place, never had that problem before. Can I just right click on the backup and delete the folder,or is there a way to do this that is safe.I dont want to run into any problems,just want to see if the icons get back to where I put them.
View 2 Replies View RelatedDid a fresh install of Windows 7 64-bit and all my apps, deleted Windows.old, defrag'ed and activated. Then created a SYSTEM IMAGE using Win 7 BACKUP and RESTORE, so far so good.
Win 7 and my apps take up 43.9 GB on the hard drive but the SYSTEM IMAGE it created on my external drive is only 23.7 GB. Tried it on my laptop with similar results ISO was about half the HDD. Does that sound right? Just seems the ISO should have matched the HDD GB-wise unless it compresses or something.
I perform an incremental back-up every day using the built-in backup program.
How often would you do a whole system image? I was thinking of only doing that every few months or less. Each image would be 80GB.
I think that's what it's called. anyway something more then just a backup. One that you don't have to reinstall your software to get it into the registry.
Do I need special software? or is there a utility in Windows 7. If not what do I need to buy?
I just.. just finished Windows 7 installation. Now my D drive is failing. Both drives are the same make model and old, in fact they were in an older computer and almost everything in the pc was updated except the harddrives because they are more then sufficient in size.
So maybe I should replace them both. But I don't want to go through the pain of reinstalling. Anyway, I usually have to reinstall due to my husbands email "joke sharing" practice usually gives us a virus about twice a year.
This backup would be very helpful, I just never looked into it until now.
just attempting my first back up image on my new build. I only have one HD with Win 7 prof on a 200gb partition and 750ish remaining on the hd.Should I do it on the 200gb partition with win 7 on or the storage partition with 750 or create a new partition of ?
View 6 Replies View RelatedI have a large number of image files on my C: Drive. 337,000 files. Many are duplicates. I want to back these up to a new drive and edit them there. Is there a way of doing this with Windows 7 backup? Or some other free backup utility?
Windows 7 Home and Business 32bit
I have a system image that was saved to a maxtor one touch ext HD via USB. This was created using Windows 7 image making system. I am trying to copy the image to my new HDD (internal) 1TB. The problem is when I go to recovery>advanced options>restore from image and reboot, the PC cannot find the image. I can click advanced options and search for a driver and actually see the drive and the image folder/zips but Windows 7 cannot detect it. I have also copied this image to a internall HDD because I thought it may be the USB. I have not changed any BIOS settings as I am using Windows 7 on the 1TB HDD and trying to restore to that from either the Dnetouch or the F:internal HDD. Neither times will it find the image.uestions. Do I need to use an alternate program like paragon or clonezilla2. When the image is saved, it is the name of my pc. Example: Fesktop64-PC. Does it need to be in a folder or the image be a specific name? Ive seen WindowsImageBackup as a possiblity.
View 6 Replies View RelatedI am going to upgrade to Windows 8 Consumer Preview, so before doing so I backed up Windows 7 as a system image to my external hard drive. In doing so, I forgot that a system image includes all the files on the drive, which means it backed up about 700 GB worth of data. That's OK except I already had those files backed up individually, so now my external drive is basically out of space for future use. Instead, what I'd like to do, is do a system image of factory state without having to lose the files already on my drive. Is that possible? I could always go back to factory condition, and save the system image, but then I'd have to re-add all my programs and files after I get the Windows 8 upgrade completed. I'd rather not have to do that unless it's an emergency.
View 5 Replies View RelatedMy problem is if I restart with HDD on,it freezes when windows logo pops up during startup. I have a bunch of saved stuff on the external besides the backup img.Its a 500gb.It still froze when I only had 10gb saved on it. Will it delete everything I have saved on my external if I boot the img? I have a extra 20gb laying around,it is large enough to hold my saved backup.
View 2 Replies View Relatedi just ran the Windows 7 systems image bu first time. completed and created recovery disk. message said completed.when i look at my external hard drive, the created file contains 0 bytes; this doesn't seem right to me based on previous imaging software I have used.
View 4 Replies View RelatedI have a couple of these older drives in good condition is it possible to install one and backup my OS/image file from my sata drive, and be able to restore in case of system crash? Or should I get another Sata drive or usb flash drive instead?
View 3 Replies View RelatedI have a windows image backup which is taking up 60gb. I need to delete it but i dont know if its safe to just delete normally.
View 2 Replies View RelatedRight now I am backing up all my files and folders through SyncToy (for easy access) but I'd like to also back up my entire Windows image with the same kind of automatic method (only transfers changes from the previous backup). Is there a free or paid program that does this?
View 5 Replies View RelatedI have a 1TB external hard drive that I will use to make a Backup Image. I'm going to Use Symantec Ghost to make a backup Image.Should I partition the External hard drive first? I would also like to use it to store other files and folders. If so, how big should the partition with the backup Images be?How large is a typical Image backup file? I also plan on backing up 2 other linux machines.
View 7 Replies View RelatedWhen I use Win 7 backup, it gives me the option each time I create a backup to create a system image. I created a system image on a CD a couple of days ago. Why does it ask me if I want to create another each time I do the backup? Is it talking about creating one on my hard drive, not a CD?
If it's just my hard drive then perhaps I should create one each time, but creating one on a CD is onerous. Plus, if this is the case, (that it wants me to create a CD) I don't know how that's to be done if the backup is on a schedule in the middle of the night.
I don't know if this has been asked already and sorry if it has.
Is there a way to save both Vista and Windows 7 complete system image on the same partition? If possible rename the folders at least (I tried this but didn't work)?
I have a limited space in my hard drive and allocated only one partition for system backups. I'm quite happy with Windows 7 and I would like to have both Vista and Windows 7 backups just in case. I'm also trying to avoid multiple DVDs as backup media as much as possible so that restoring the image would be easier for my kid when i'm not around.
I have run the "create system image" successfully until today. I have an external HD for that image file. It appears to run, goes through the steps and says it has created the image. But when I go to the external HD and click on the Image file that was created there is nothing there. It shows 0. What could I have done to do this. I even looked for that image file on my C: drive, just in case, but it is not there either.
View 4 Replies View RelatedMy ST3500418AS 500GB died and took my Windows 7 with it, so I had to do a fresh install to another hard disk.
Unfortunately, Backup and Restore cannot see the backup location from my previous install, so I can't get my files back that way.
I presume that the VHD file I see in the backup folder is the system image of the previous install.
Is there any way I can extract my files from this VHD using some software package, or even convert it to another format such as ISO and extract my files that way?
There's a lot of great pics and stuff there that I don't even remember where I got it from, so I'm pretty desperate to get it all back.
I'm trying to make a system image and configure backups but I'm unable to select the internal drive that has the space I need.
I have a 1Tb drive portioned into C: [Windows 7] and D: [Data]
and a 750Gb drive [H:] that used to have XP on it that I want to put my backups on.
I used to dual boot XP and Windows 7.
Computer Management > Disk Management shows
C: Healthy (Boot, Page File, Active, Crash Dumo, Primary Partition)
D: Healthy (Primary Partition)
H: Healthy (System, Active, Primary Partition)
System Imaging/Backup help says you can't backup to the system (startup) drive (not sure why?)
Is there any way to change which drive is designated as the system drive?
I've removed the dual boot and used bcdedit on C: to only reference itself
What's else do I need to do to make C: the system drive?
I make use of the Windows 7 Backup and Restore programs.
Automatically everyday a backup is scheduled.
This backup is configured to contain all user files and a system image.
Now I have tried to find the system image, but I don't know what file extension the image backup should have.
In my backup folder, below, only two .VHD files are present, and a bunch of XML Documents.
X:\WindowsImageBackup\XXXX\Backup 2009-11-04 160010
Can someone explain me in which files the backup and restore programs save the backups?
Also I like to know where I should look for, to know for sure my backup is done successfully.
I made a backup image a couple of weeks ago using Paragon Backup & Recovery ,but since that time I have deleted about 80GB of files.
I don't want those files put back on my C drive if I need to do a restore from image.So I want to start fresh with a clean image and then do my scheduled differential back ups.
I can't remember how to wipe the info off the ext.Can't find an answer in the Paragon program.
Any suggestions?
