I have a Dell Laptop that won't boot up anymore (BSOD), I have saved all the data on the drive and I want to re-install/repair windows but I do not have the original Dell Windows 7 DVD (and the recovery drive was nuked). I do have a copy of Windows 7 Ultimate on me and I was wondering if I could use that to do the re-install (and keep their valid Dell CD-Key)? Is this possible?
View 8 Replies
Recently my old laptop (toshiba a200-1vo) stopped booting. I'd get the "windows has failed to start" message which led me to try to start it up in safe mode, command line mode, etc which all resulted in a black screen with a movable cursor.I then tried booting from my win 7 CD to either try using the recovery console or just format/install again with no avail. The installation only recognizes my hdd as "unpartionated disk space" and does not allow me to install windows 7 either "'Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure the disk's controller is enabled in the computer's BIOS menu" - I'm not sure what this means but I do have the bios configured to boot from windows 7 as first source. I then tried running the recovery console which failed to resolve my problems automatically and got the following message "windows boot manager is missing or corrupt". After this I think it became apparent my hdd has some kind of issue. I tried going into the console and manually format but windows only recognizes 1 disk partition (X: which is the Boot partition). I've tried a few commands like bootrec /fixmbr /fixboot /rebuildbcd but nothing seems to work. chkdsk can't even be started either since windows can't detect any partition either.
View 9 Replies View RelatedI installed some software yesterday on my other PC and it seemed to cause some problems with another application so I uninstalled it via Remove Programs. On restart Windows 7 (Home Premium 64 bit) failed to start and all I got was a BSOD with the main error PFN_LIST_CORRUPT. After unsuccessfully trying to start in Safe Mode or Last Known Good Configuration I thought I'd try to repair the W7 installation using the W7 disc. (BTW - I don't know of any other options in W7 but would be grateful for any advice on that.) After powering up I pressed F12 to get a menu up and selected the option 'Boot from CDROM'. It seemed to be doing this and I got the message 'Windows is Loading Files'. I expected at that stage to be presented with an 'install or repair W7' option screen from the disc, like in XP. However, all that happened is that the OS proceeded to try and load, unsuccessfully, and went back to the BSOD. How do I get the disc to try and repair the install, or, if it comes to it, reinstall W7? I can't see those options. Do I need to amend the BIOS or something? (In the meantime I have put the disc in and chosen to run the Windows Memory Diagnostics Tool (extended option) in the hope of finding the problem. This has been stuck at 21% for about an hour.) PS - I don't know which details are relevant but motherboard on that PC is Gigabyte P67A-UD7, processor is Intel 2600k, with 8GB of RAM. It is not connected to the internet.
View 6 Replies View RelatedGot my stuff ready to reformat, only to realize I don't have a Windows 7 recovery disc.I created a System Repair Disc using Backup & Restore in control panel but I'm unsure whether this is what I need to do a complete reinstall?I wanted to follow this guide to do a complete reformat, not a recovery.
View 2 Replies View RelatedComputer: Toshiba Satellite L455-s5976 2gb ram
I am in the process of trying to repair/reinstall Windows 7 32 bit home premium after a crash that has disabled my laptop. The computer has no longer booted properly after the crash occurred when I had to control+alt+delete out of a frozen screen. I do not feel the root of the problem is from a virus of any kind as I only visit mainstream websites and my virus protection/firefox has caught the very few instances I have ever run into. When it boots now, it starts normally showing the Toshiba logo then says "windows is loading files", then shows "microsoft corporation" with the moving green bar underneath and finally after a good while goes to windows 7 backdrop with nothing else showing but the mouse pointer.
I have tried a repair disc and booted from the DVD/CD drive to no avail. My system tools do come up for use but it will not boot into safe mode. It also shows no restore points. I did the memory diagnostic and nothing came of it. I have run startup repair several times and it just sits there running..the last time running it for 4 days straight continuous with no results. When the "System Recovery Options" box pops up searching for windows installs it shows a single Windows 7 install under the E: drive with partition size of 0 mb, but im almost certain my Windows is not under drive E:, but it does not find any other Windows installs though.
I am able to look around abit at the hard drive by clicking "load drivers" under the "System Recovery Options" and this is what it shows. 4 hard drives: "system reserved (c drive" 70.1mb free of 99mb "local disc (D drive does not show size or allow me to access it when i click on it "local disk (e drive same, does not show me size or allow me to access it. Boot (x drive 29.1mb free of 31.5mb Then (f drive Repair disc windows 7 64bit. About 8 months ago the computer crashed after my daughter changed some file type assignments and we had to reinstall Windows 7. The reinstall did take, but I do not think we formatted the drives properly with the reinstall and there were several different partitions on the hard drive.
After that install it would show PXE-E61 Media Test Failure, check cable/ PXE-MOF Exiting pxe rom when it would first boot, but it still booted properly and never had any other problems with the reinstall until now. Also windows would never allow me to do a "back up" after the reinstall. When I reinstall windows this time I want to get the partitions in proper order and make sure everything is working properly so im not in this situation without a backup again. I am hoping I have not lost the data on this computer and have been looking at buying a hard drive adapter so I can connect the laptops hard drive to my home pc and hopefully recover the data off the hard drive before reinstalling windows again. Is this an effective way of preserving any data on the hard drive before I reinstall?
I have a netbook ASUS Eee PC 1005PXD.After only two days of use, i get a black screen at the beginning: "Reboot and select proper boot device or insert boot media in selected boot device and press a key".Pressing F9 on boot doesn't work and i'm still getting the black screen.F2 is working, then in Boot Settings, i set Removable Device as 1st Boot Device. (and there is no Boot Booster option to disable).Then, using the Windows 7 USB/DVD Download Tool, i create a Windows 7 bootable USB, in order to use the System Recovery.When i get to the System Recovery Options screen, no Operating System appear in the list. (It say to load drivers in this case, but i have no idea which drivers and how to load them).
Then i press next without choosing OS, but pressing Startup Repair after that didn't help.Also using the Command Prompt didn't help (bootrec /fixmbr, bootrec /fixboot, bootrec /scanos, bootrec /rebuildbcd) The two last commands (/scanos and /rebuildbcd) give: "Number of windows installed: 0".Then i decided to reformat and reinstall Windows 7 (my netbook is new):i boot using the Windows 7 bootable USB i created before, then on first screen i press on "Install now".When i get to screen "Which type of installation do you want", i choose Custom.Then i get to screen "Where do you want to install Windows?" but the list is empty, and at the bottom, it is written "No drives were found. Click Load Driver to provide a mass storage driver for installation".
Acer Aspire 17.3 laptop. had black screen with a few words eg. no system. used F10 and now have Windows Boot Manager black page with Windows failed to start and 1,2,3 insert disk and restart. choose Enter and it offers Window 7 Enter or F8. all choices come back to these same 2 pages. Ctrl+Alt+Del brings me back as well. the following words apper each time. FILE windowssystem 32win load.exe STATUS oxc 000000f INFO the selected entry could not be loaded because the application is missing or corrupt
View 5 Replies View RelatedI couldn't find Windows 7 Repair Disc / Repair System / rewrite MBR for x64?
View 1 Replies View RelatedI am pretty sure that a virus cause this, right before my computer shut down on it's own my anti virus popped up and said that a Trojan was found but I didn't have to do anything. Then the computer shut down and when it restartrd started to load files and then go into startup repair, only it couldn't fix it. I tried a restore, but again it said that the startup files wern't there. I just quickly scanned the diagnostic details and noticed something that said "boot critical file C:CI.dll is corrupt".
View 8 Replies View RelatedI have a Toshiba Satellite C655-S5132 that just shut down & now will not boot Windows 7. Just goes to black screen w/blinking cursor then goes to 'startup repair' (which I'm postiive this is a virus of somekind) & will not allow me to do anything. Just repeats itself. I downloaded Windows 7 repair to a CD-R, chgd BIOS settings to CD/DVD to boot first, saved changes, and will NOT pull/boot up from disc. I've tried 2diff repair discs, both do not work. 'F8' does not do anything for me, not able to get to 'safe mode'. Computer is only 2yrs old.
View 9 Replies View RelatedCreated it with no problems, apparently at least. My BIOS is set to boot from CD drive, so why won't my machine boot from the system repair disk? There were no errors when disk was created. My machine just boots to windows.
Anyone else experience this with Win 7 Professional?
windows 7 startup repair on every boot but after startup repair hibernate works. How to fix?
View 1 Replies View RelatedI cannot get my computer to restart. It tries to restart but keeps saying that startup repair cannot repair computer automatically. I try to do a system restore but it won't let me do that either
View 1 Replies View RelatedOne day my computer decided not to load windows 7, and instead whenever i open my computer it gets to setup repair, which checks for problems automatically, and then gives the following message:Setup repair cannot repair this computer automatically
Problem Event Name: SetupRepairOffline
Problem Signature 01: 0.0.0.0
Problem Signature 02: 0.0.0.0
Problem Signature 03: unknown
Problem Signature 04: 0
Problem Signature 05: unknown
Problem Signature 06: 1
Problem Signature 07: unknown
OS Version: 6.01.7600.2.0.0.256.1
Locale ID: 1033
I have toshiba satellite P205D-S7438?
On start up a black and white gateway screen flashes followed by a startup Repair window.This gives me a pop up that says Startup Repair cannot repair this computer automatically.There is the option of sending the information to microsoft or viewing problem details.When looking at the details, Problem Signature:Problem Event Name:StartupRepairOfflineProblem Signature 01:6.1.7600.16385Problem Signature 02:6.1.7600.16385Problem Signature 03:unknownProblem Signature 04: 21200290Problem Signature 05:AutoFailoverProblem Signature 06:11Problem Signature 07: CorruptFileOS Version:6.1.7601.2.1.0.256.1Locale ID:1033Underneath the pop up box, The startup Repair window says WIndows cannot repair this computer automaticallywith the option of viewing diagmostic repair details or viewing advanced options for system recovery and support Under the advanced options, I have tried the startup repair, the system restore, the command promptchkdsk/f/rNone of which have worked Prior to this the notebook was working fine last night, I did not install anythingI ran the Farbar Recovery Scan ToolMod Edit: Removed FRST data, this is a malware tool not permitted in this forum and you have made no indication that this is a malware situation ~ Hamluis.
View 7 Replies View RelatedStart up repair cannot repair this computer automatically , I am getting this all of the time now when starting the PC ,i am sure it started when a new video card got put in but not sure?
View 2 Replies View Relatedwhen I go to safe mode and hit repair computer they say I have to use a dvd and hit repair. my dvd does not have repair on it I have trouble with startup I do not know how to use the dvd if it has no repair listed
View 9 Replies View RelatedI have no idea what was the last thing done on this computer (it is my wifes), but I do know that every now and then there has been a disc failure, checking disc startup, but it has always had a positive outcome.[CODE]
View 4 Replies View Relatedi use ubuntu OS and windows7 professional on an HP dv5 notebook, last week i made a mistake in that i removed the battery while the machine was on as i was using windows7. the time i tried to restart it again it recommended startup repair which ran but 'could not repair it automatically' i tried the f8 options but to no avail. when i run scan and memory diagnostics all are successful but the system can still boot. am able to view my data on windows through ubuntu but ubuntu can't execute windows programs. what should i do to restore windows without loosing data?
View 5 Replies View RelatedI just spent the last half day fixing a laptop, had to buy a new hard drive and reinstall the OS from recovery discs. (Win 7 64 bit, on Satellite Toshiba) I just noticed that I did not install it with a partition for the OS, Is this going to be a big problem at some point? I had checked off "Factory Settings" when installing, I just assumed that it would have installed with a partition. Before I go any further with this laptop I would like to have some input please. I just spent the last 3 hours installing updates and finally SP1.
View 9 Replies View RelatedMy computer was blue screening, freezing, locking up, etc so I took it to a repair shop and to make sure all the hardware was ok. All the tests passed but the problems were still continuing. They eventually decided to reinstall my OS which is Windows 7 and everything's been working fine except my computer is a lot slower and frequently feels laggy where they mouse would freeze up for a few seconds or move slowly across the screen. I have already tried cleaning out my registry with CCleaner and tried defragmenting but to no avail. I was wondering if there is another way to solve my computer lag problem.
View 4 Replies View RelatedSo, for performance reasons I need to wipe and reinstall windows on my laptop. Do I need to buy a new registration code [$$ ] or will windows recognize that the computer is the same and let me use the same key??
View 2 Replies View RelatedI have Windows 7 Ultimate x64 and recently had a system crash. I got a blue screen stating ''hard error'' and my system was promptly restarted. Startup repair tried to do his things but it failed(and did an endless loop in trying to do so). I couldn't boot in safe mode, I couldn't do anything. I resorted to reinstalling Windows 7 using my CD. I took the custom installation rather than the upgrade because the upgrade would essentially lead to the endless startup repair loot. Now, after everything was done, it's said my old Windows is still on the computer under the file name ''Windows old'', I checked and it is indeed there. Wouldn't there be a way to reinstall Windows old? I really don't want to be forced to reinstall all my drivers and updates.
View 9 Replies View RelatedI can't get windows to reinstallI changed the controllers to ahci (because i think the system isnt reconising my ssd as i only get a 5.9 experience score with it) in regedit which seemed to work then changed ahci in bios then windows won't boot , I've tried to run my genuine windows disk to reinstall windows but it won't get past about 20% then I get 'windows cannot install required files, the file does not exist, make sure all files required for installation are available, and restart the installation, error code 0x80070002
View 9 Replies View Relatedi am using thoshiba laptop with OS windows 7. two days back my battery part became very hot and in a quick i turn off my system.But then after i cant boot my system with battery.. that means my battery is dead..bt last day on wards i cant do any thing with my lap...i cant boot..then i tried to re install my system. so i put my os dvd and trid to boot from dvd..any hw it worked and when i select my system drive it is showing a message " windows canot installed to disk 0 part 1". then i formated that drive and tried once again this time also i got the same error message. then i clicked the more details their they are showing the error message" Winodws cannot installed to tjis disc. this computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the bios"
View 6 Replies View RelatedWe purchased 2 new computers for work and they both contain Windows 64 bit. Our accounting program is not compatible with 64 bit. I have found a work-around but it isn't very stable (using Windows XP virtual mode).
So, my plan was to reinstall Windows 32 bit on the machine. The machine is an HP 505B Microtower. I have an official version of 32 bit Windows 7 Professional. I understand that the one on the HP is OEM, but I will cross that bridge when I come to it with the serial number (I did back up the activation certificates using the ABR Utility).
I downloaded the ISO from the Microsoft store, so it's an official Windows version. I created a bootable USB drive using DISKPART to clean and format the drive and using the bootsect.exe file from the mounted ISO to make it bootable. I then copy the entire contents of the mounted ISO to the flash drive. I have done this to install Windows 7 before and it has worked flawlessly.
Then when I boot from the flash drive on the HP, it gives me the "Install" screen and then it asks for CD/DVD drivers. I am assuming it really means the SATA drivers for the HD, because the DVD drive isn't even in use at this point. So, I go to the HP site and download the drivers for the storage devices. When I browse to that directory on the CD, Windows Install sees the driver and tries to install it, but still says that it cannot find any appropriate drivers.
I've read about possible reasons this error occurs. Some people have had bad burns from their ISO. Since mine is on a flash drive, it's not the burn. I have re-copied the files. I even re-downloaded the ISO and did the process all fresh just in case some random file was corrupted, still with the same error.
I can't seem to figure out why it won't let me get past the drivers point. I've never had to load drivers when installing Windows 7. All my other installs have gone flawelessly, even on machines that have come with OEM version of Windows.
I've got fundamental problems with my music software (Sonar) that other users and the company can't replicate. After days wasted trying for solutions I've decided the only route is completely clean reinstall of Windows 7.I just tried a custom clean install from the disk, but now on switch on I'm given a choice between 'windows 7' and 'windows 7', the former taking me to a bare bones version (what I need really) and the second to my old fullblown setup that I want to lose. I've got my data on other drives so I'm happy to zap all this. How do I do I good old fashioned format and then a reinstall? I'm not computer savvy so I know I need to proceed carefully as the OS disk I think is part of a real hard drive.
View 3 Replies View RelatedI have this problem since i "hacked" the Registry and I can't reinstall windows 7 at all.
View 2 Replies View RelatedMy computer has a ton of viruses and I want to do a clean reinstall of windows 7. My computer originally came with Vista but a year later I upgraded to 7 Home Premium. I upgraded by buying a product key (no disc) from the Microsoft website and downloading some file/application to install 7. I cannot find this file nor can I find anywhere on the Microsoft website which would allow me to download it again.
View 9 Replies View RelatedI want to put a new and large hd in aspire 5517 laptop. Can I use my original disk for this? Someone told me I would have to buy a new version.
View 7 Replies View Relatedi have dell inspiron 630m, how do i reinstall windows xp from dell hidden partition?
View 5 Replies View Related
