i've had this before but can't remember what i did to stop it.it is exactly like you pull the dvi/hdmi lead out of monitor/gpu everything still working i.e. if playing video on Internet it carries on playing just no picture.i think it was something to do with intel's built in gpu, but i have disabled it everywhere i can think of bios, device manager etc.can anyone through some light on this please as it's startingto annoy me now
View 9 RepliesBuilding new pc and I am getting random blackscreens. Some times before windows7 starts sometimes hours after windows has beeen running. My mobo is ta760gm2 with athlonx2 4850, corsair tx750, ocz fatality 2x2gb, velociraptor 74gb hd and wd caviar black 1tb hd. CPU never gets over 46c I have tryied reinstalling the os several times and got many updates completed.
View 2 Replies View RelatedIn the last few weeks I've had random Black Screens Of Death. It can happen (most of the time) while playing a game, but it has happened while the PC was idle (rare) and just now it happened as I was attempting to refresh the Win 7 performance index. Most of the time, the screen goes black (complete video signal loss) and I have to hard reset. On the rare occasion it will go black, then after a while crash and dump. The last minidump file I got is included here. It seems fairly obvious that the issue is video related but I can't tell if it's the ATI drivers or a 3rd party driver causing havok with them.I've been trying, with zero success, to get some Driver Verifier output. Once I set Driver Verifier to check the 3rd party drivers it bluescreens during the Windows 7 splash screen and then reboots and loops. What I did do was hit F8 during one of the loops and stopped it from rebooting on error so I could capture the detail of the bluescreen. It's as follows:
Stop 0x0000001E (0xFFFFFFFFC0000005, 0xFFFFF80003AD4D56, 0x0000000000000000, 0x0000000000000000).
I can't tell if this issue is related to my black screen issue.I think the issue is driver related but can't prove it at this point and I'm having difficulty interpreting the addresses above.I've run memtest for a couple of hours and no errors came up.
System Info
---------
Windows 7 x64 Ultimate SP1 Alienware OEM
Age of system : 14 months
CPU : i7-980X
Video Card : ATI 5970
MotherBoard : Alienware
Power Supply: 850W
RAM : 24 Gig RAM (1333 9-9-9-24)
All BIOS versions and driver versions are the latest.
OS Version: Microsoft Windows 7 Home Premium, 64 bit
Processor: Intel(R) Core(TM) i7 CPU Q 740 @ 1.73GHz, Intel64 Family 6 Model 30 Stepping 5
Processor Count: 8
RAM: 8117 Mb
Graphics Card: ATI Mobility Radeon HD 5470, 1024 Mb
Motherboard: ASUSTeK Computer Inc., K42Jr
Antivirus: Norton Internet Security, Updated and Enabled
I would get a random black screen while playing an online game on my laptop (this happens randomly but usually 15-30mins after starting Windows and start playing the game). After the black screen appeared, it would automatically reboot to this windows error recovery page with options to go into safe mode (networking/command prompt) or just boot windows normally.I chose to boot Windows normally but after getting into Windows 7 and started playing a while, a random BSOD would appear. It has happened for 2-3 days straight. The attached is the mini dump.
Note: I did not install anything new to my laptop, I have ran chkdsk and sfc /scannow and found nothing.I have no idea what caused the black screen and the BSOD.
black screen usually no errors just a black screen sound will lag and freeze up have to hard reset it no blue screens usually here is the latest mini dump file.
this is the latest mini dump file most the time my comp never blue screens just hangs black so i never knew there was mini dump files still coming in and i have a bunch of those but this is the latest one.
had a driver issue a while back was getting blue screens from it but i completely erased it out of drivers folder and win32 drivers folder which was locked but i used a reg editor here that made it possible to take ownership of a folder and then i completely deleted it out of my system so i think.
My systems sometimes freezes during the boot process and all I get is black screen.
This happens when the error occurs:
BIOS shows up normally
Window 7 logo is shown for a brief second
black screen
With boot details enabled, I see that drivers are getting loaded until classpnp.sys. After that the screen goes black as well and the system hangs.
Now when I turn on the machine, I get a text screen asking me whether to start normally or run a recovery attempt. Usually starting normally is all it takes and Windows boots up fine. Once Windows is up and running, it's rock solid. No lockups, no BSODs or whatsoever.
Unfortunately I have no idea how to get debug details of this part of the boot process (os loader phase?).
I already switched the SATA Ports, switched to a different brand and even switched to mSATA. So I'm pretty sure it's not the SSD. Using Windows SATA drivers or Intel RST doesn't make a difference either btw.
Hardware :
Motherboard : Intel DN2800mt, latest BIOS (156)
Graphic Card : GMA 3650 (recent drivers)
CPU : Cedar Trail Atom @ 1,8GHz
Ram : 4 GB - Corsair 1333 MHz
SSD: Crucial M4 64 GB in AHCI mode, latest FW (000f)
My dell computer screen flashes black for a half a second or a second at random intervals (anywhere from once a minute to every couple of seconds), but the system has not frozen, as I can continue to type, music keeps playing, etc. I found a site which suggests that it is my AC socket or adapter, but the same problem exists on battery power.
View 2 Replies View RelatedI installed Windows 7 on my computer (Upgraded from windows xp) and everything seems well. However, at random times it (sometimes it flickers black) goes into BSOD then restarts again to windows,,the DMP shows different kind of problems like:
Memory Management Failure "IRQL_NOT_LESS_OR_EQUAL" System Service Exception
I recently bought two 2gb ddr2RAM and I am now using it.
When I'm using my computer I tend to get a black screen at random times. So far they usually occur while I'm browsing the web and while I'm playing games while on Skype. This happened before and the problem was that I needed a new DVI cable. After getting it fixed it was working fine until about a week ago where I started getting few crashes. Now I'm getting 1 crash everyday.There are times where I go to start my computer, but after the Windows logo I am left with a black screen. I usually keep restarting my computer until it turns on normally. I don't know why but I have a hunch that it might be PSU, temperature, or compatibility problems.I'm not sure if I've attached everything you need, so do let me know if I'm missing anything.
View 9 Replies View RelatedMy wife did something on her PC (she doesn't know exactly for sure what & can't explain it completely me), and now she can't boot up her PC. She says it had something to do with changing the security settings for a program she uses a lot so it wouldn't keep asking her if she wanted to launch it, and that's when it told her to restart the PC, then it wouldn't boot up anymore.When you reboot, the screen eventually goes to a black screen saying "Windows failed to start. A software or hardware error may be the cause" or something to that effect. It offers me the option to "Launch Startup Repair" or "Start Windows Normally".If I Launch Startup Repair, nothing much happens --- it says it's adding files, then it looks like Windows is about to boot up, then it goes to a black screen for a long time & nothing happens.
If I choose Start Windows Normally, it simply reboots & eventually brings me back to the same screen again.I've tried using rebooting and selecting ESC to get to the boot menu, then installing the Win 7 installation disc & selecting the DVD drive, then I select thelanguage, then I click Repair, but it sits there forever with nothing happening.I also tried an outside boot disc I found on the web & it doesn't launch.
My son has a Toshiba Satelite P205 that he just upgraded from Windows XP Home Premium to Windows 7 32-bit. After the upgrade completed the computer booted fine. The within 20 minutes he got the BSOD and the system rebooted. Now he can't get Windows to fully start. We've tried all of the options from F8 with no success. We have the Toshiba System Recovery Disk but it won't launch. (The Boot sequence has been changed to boot from CD/DVD and then the Hard Drive.)The Memory Diagnostic from the Windows 7 disk ran fine with no errors. I'm thinking I might need to re-format/wipe the drive to start fresh but don't know where to obtain a boot CD(no floppy drive on this laptop). Does anyone recommend a software that I can purchase to clear everything without destroying the CD/DVD accessibility so I can then use the System Recovery Disk to put it back to the original factory Settings?
View 1 Replies View RelatedI have an Acer aspire 5732Z. I turn my laptop on and it shows the starting windows screen then just goes to a black screen with a cursor. I tried to do systems restore but it said that I did not have a system restore point. I cannot start in any safe mode. I have all my pictures, uni work etc., and I am terrified I've lost it all. I've only had the laptop a year.
View 1 Replies View RelatedMy computer has these phases when it crashes about 5-10 times a day with the same way. The monitor turns black and GPU coolergoes to 100%. Only thing I can do is hard reset the computer. I finally managed to get a bluescreen about it.
View 4 Replies View RelatedLots of issues with WMM on Windows 7. Among them, for no apparent reason random clips turn black and an "!" is shown where the clip was.Any way to install earlier version of WMM on Windows 7?
View 1 Replies View RelatedI have recently bought a computer and I have found that when I turn it on it runs normally until after the "Resuming Windows" screen, where everything turns off and the screen goes black. It had been running well for the last few days, so this came out of nowhere.I have searched this problem and I come up with a bunch of different solutions but no one agrees. The most common reason (apparently) is my version of Windows 7 Home Premium (x64) and I need to install something or other. But I can't even get to the desktop, and no one really explains it simply. [code]
View 3 Replies View RelatedRecently, my computer starts up windows and after the loading screen it just sits at a black screen forever with a cursor and it doesn't even make it to the log in screen. I have tried safe mode with the same results. What I've Done So FarTried to Repair Startup with Windows DVD Tried to use sfc /scannow at boot (Says pending changes and needs to restart) Tried logging into my Ubuntu partition and virus scanning (None found) Tried copying Reg Files from Regback into config while I was in Linux Tried to Repair Install (But I can't log into Windows ) Tried to bootrec /fixmbr /fixbot /RebuildBcd (Which destroyed my dual boot linux grub, but I was desperate. And still nothing) Interestingly though, after I do /RebuildBcd command it says something like "Found Windows Installations: 0" Tried to System Restore (Gave me an Error, wouldn't you know) At this point I'm not to confident that this can be fixed. If anyone has any ideas I'm willing to try. Or if you have any snazzy suggestions on how I could fix it using another computer, I have a different Windows Pro x64 computer that I can put the HD in if there's someway I can save my data/fix it/repair install from there. I just don't know how.
Edit: I finished the chkdsk and there were no bad sectors, though it did give me a message "Failed to transfer logged messages to the event log with status 50."I did a Windows Defender Offline scan with no viruses and I'm currently scanning with Kaspersky Rescue disk. I don't believe it is a virus, I think it's a corruptregistry at this point. I had just cleaned my registry with CCleaner before the shutdown that led to this >.<
i recently just installed a clean install of windows 7(instead of a upgrade from my vista.i got the free upgrade),now everything works fine expect when after the windows 7 splash occurs there is about a 10 second delay were the screen is just black with a cursor.
View 9 Replies View RelatedWhenever the Windows loadscreen passes the screen goes black and I can move a cursor around the screen. I have had this happen before and fixed it with bootrec.exe but I can't seem to get that to work this time. Safe mode has the exact same black screen problem.I have done chkdsk and sfc scannow - Didn't fix it.When I boot into Kaspersky Rescue from a USB drive it mentions that I need to shut down windows properly before continuing. I would like to do this but I can't.I have tried changing the active partition on information in some of these other threads - It didn't seem to work.All disks are healthy according to the DISKPART and Partition Wizard. I have done the HP hardware diagnostic scans and everything comes up fine.
View 1 Replies View Relatedadvent roma 3000 is not starting, when I turn it on, only black screen and the sound of movement, which comes on and off.
View 4 Replies View Relatedhis problem started with XP and I decided to upgrade to win 7 pro.
My PC has a black screen on wake up more times than not. Wake up is set for a login screen normally. My settings are screen saver after 10 mins then send screen to sleep in 20 mins, no hibernation mode, rest machine remains alive, runs 24/7 normally.
I have swapped the power supply and graphics card with ones that work in the same model PC and no joy.
one day it suddenly crashed while i was watching a movie. it displayed random patterns on screen. kinda like part of the image from the video is on the screen then a black strip and random colors. I restarted the unit to safe mode and left it on and browsed the net and downloaded some big files for how many hours and nothing happened.. there are also times when windows is still loading with the windows logo on screen, it crashes. there are also times when the login screen is displayed and it crashes. it just crashes randomly! so i tried to reformat it. i deleted the partitions and created a new one, formatted it then fresh installed windows 7 ( my previous OS is windows 7 by the way) and started installing the basic drivers and after a few hours, it crashed again...thinking that the driver installed might not be compatible, i tried another fresh install of windows (same execution, delete partition, create, install OS) and this time, without installing the drivers, it crashed again after a few hours... sometimes it crashes immediately after turning it on from cold start!
View 7 Replies View Relatedi have a Dell Vostro 1520 and im running Windows 7 with a 32bit. It is only 2 years only. It started about a month ago. I was on my laptop viewing and deleting some unwanted photos i had. A few minutes later i realized that i deleted a photo that i wanted. So i went to the recycling bin and restored that photo. When i went back to my photos and went into the album, it said something like i do no have permission to access this folder. Please press continue to get full permission. I clicked continue and i got the access i should have. Now i tried many more random folders and the same thing happened. Also when i came out of the folders, the folders had a big pad lock sign on the front of it. After that i shut down the laptop and went to turn it back on. The laptop will power on like normal. I can press f12 for the boot options. which i have already tried many times. I also tried it in safe mode and what-not, but still nothing. I can hear the fan and stuff spinning up like normal. I have also put and CD into the CD ROM and that spins up fine. So after the Dell logo on the screen, it goes black and stays that way with the cursor. You can move the cursor around no problem. I should also add that the battery light is and has been flashing for a good wile. Its flashing orange and blue. I'm wondering if this has anything to do with the battery. Because my laptop will not charge with the AC adapter in it for many months now. It will only stay powered on with the AC adapter plugged in. One more thing. The LED lights over the buttons. None of the are flashing, besides one, on the far left. And i cant find out anywhere what this LED light stands for.
View 3 Replies View RelatedMy computer has a problem with crashing while playing a video in full screen. When it crashes the screen turns black while the speakers give out a buzzing noise. Everything is unresposive the only solution is to turn it off with the power button. It happens in any full screen video online or offline and even visualizations from windows media player and iTunes, but only in full screen. I don't think it's overheating either because sometimes it takes 30 mins to crash and other times it will crash immediately when put in full screen. *I've tried setting it back to factory settings thus reinstalling windows. *All the directx features are working with no reported problem there.* I don't think it's a memory issue in the computer, as my specs are:
Windows 7 64-bit
Processor: intel core i5 3.20 GHz
Ram: 8 GB
Graphics card: NVIDIA GeForce GT 220
Graphics card memory: 0.5 GB
Any other ideas?
I'm using I have a DELL4500S desktop, on startup it will not go to the login screen, the screen is just black with the cursor showing. I've tried restarting the computer, unplugging everything and restarting it. Nothing is working. When it first starts a pop up shows and says "This Application has failed to start because SAMLIB.dll was not found. Re-installing the application may fix the problem."I'm not sure what it's talking about and what to re install and I can't reinstall whatever it is because I can't get to the start menu.
View 3 Replies View RelatedI just upgraded to Windows 7 on my Toshiba Satellite Special Edition laptop that came with Vista 64bit and the other night i downloaded iTunes 10 and told me to restart my machine so I clicked ok and then my laptop shut off and when it came back on the Toshiba screen came up as usual but seemed to stay on longer than normal then it goes to a black screen with a underscore that blinks for a few moments then becomes solid. Ive tried to use the "F" keys to get different boot options because i have the windows 7 ISO disc and a ubuntu disc that I could use but whatever i try my laptop wont process it just does the same thing over and over again and bever proceeds to the actually boot up windows.
View 7 Replies View RelatedI have a Toshiba laptop running windows 7. It has been running like a well oiled machine since the day I got it.I turned it off to watch TV, then when I turned it back on, the screen shows the Toshiba screen for about 1/4th of a second and then goes black.If I hit F8, F10, or F12 nothing shows up.
View 2 Replies View RelatedWhile attempting to restore a previous backup of my system (with Norton Ghost 15), I got an error, and the system rebooted. Upon reboot, I get the black screen of death with just the cursor instead of the usual login screen. I have tried the following thus far: These all give me the black screen of death with movable cursor:boot in safe mode boot in safe mode with networking boot in safe mode with command prompt last known good configuration I did an initial system startup repair which went through and said it repaired it, rebooted, but no change. I did a pre-boot diagnostic test - nothing memory test - nothing tried restoring from restore point, but it says I don't have any (LIES! BLASPHEMY!) tried restoring from restore point on external disk - seemed okay, then failed. chkdsk - found some stuff, fixed it, no change. tried ctrl+alt+del on black screen of death - nothing
Now, I know that the hard drive itself is alright, that is, the information is still all there still. While I can't give you exact specs, I can tell you that I am on a Dell Studio XPS running Windows 7 home premium 64 bit. I'm at a loss as to what else to do. Despite being a black screen, with just a movable cursor, the system still appears to be running, as every few minutes, it will show the "thinking" cursor, where it shows the little circle next to the arrow.
i have an HP Pavillion dv7 with windows7. It is less then 3 months old. Problem- Yesterday the screen went black while i was watching a video, but the sound kept going. so i restarted the computer, and the screen works until you get to the login screen it goes black again. SO i called customer service at hp, and we worked on it for an hour.THe one thing that seems to work is when i go to the device manager, uninstall the display adapters, and restsart in normal mode, then i go and reinstall the ATI device thing in the recovery manager, but everytime after i reinstall the ATI display device thing, it ends up going black a little while later again. lol
View 3 Replies View RelatedRecently my Satellite M305-S39052 was upgraded from Vista to Windows 7 Pro. Everything works fine except for a couple of things; the machine will not restart and even though the buttons on the keyboard are lit, the screen goes black and will not finish the restart sequence. Besides that, after a Windows Update, the pointer will not move and then I have to shut down. After starting in safe mode and doing a System Restore, everything works except for the restart and the Windows Update.
View 7 Replies View RelatedToday i noticed that after my windows 7 logon screen i get a black screen with only my mouse pointer on it. i already tried restoring to a day before the problem but same thing happens. what can i do to fix it? seems to me that the problem started after i installed hotspot-shield i guess it cameout with some driver installer but i dont know which ones
View 9 Replies View Relatedabout a month ago my pc started having errors at bootup. it would get as far as the desktop, then freeze the desktop, allowing me to still use my mouse but i couldnt select anything and the system would hang. After restarting on average about 5 times it would then work and my pc would run perfectly. about 2 weeks ago i had a blue screen crash that mentioned something about the display drivers. (i was using a radeon 4870) i figured this, with the startup problem must be my graphics card on its way out. one day i started my pc and was greeted by my 1st 'black screen' with cursor and decided enough was enough and took out my graphics card, leaving only the on board graphics (radeon 4250). my pc worked fine for a few days and i decided to try and work out if the problem was software of hardware related so i reinstalled my 4870 card. this immediatly booted me to the black screen with cursor so strait away i took it out again.
View 7 Replies View Related