Promise Fasttrak 378 Sata Driver - K8V Deluxe
Dec 26, 2009
I'm in a fight with windows 7.
The problem is i'm having is that i can't find any sata drivers for my Promise 378 controller.
I am trying to install Windows 7 x64 edition.
But no luck so far.
In the bios i have set the promise chipset to operate in IDE mode.
Because i'm using only 1 drive.
Tried the VIA drivers for the onboard chipset as well, they only operate in raid.
So those won't work.
Spend like 5 hours online googling for it but no luck so far.
View 0 Replies
ADVERTISEMENT
Nov 5, 2009
Is there a Sata driver for Asus A7N8X-E Deluxe on Windows 7?
I've been searching on the net but I'm unable to find a driver and need it for Windows 7 install on Sata drive.
View 5 Replies
View Related
Aug 2, 2009
im looking for a windows 7 (RTM) driver for:
Promise Fasttrak 376/378 SATA controller
This is a sata built into my motherboard All drivers are XP 32/64bit and don't work during installation of Windows 7
latest i have found is:
http://www.station-drivers.com/page/promise.htm
http://www.station-drivers.com/
However that doesn't work.
Any way to modify the drivers?
View 8 Replies
View Related
Nov 26, 2009
I need Download SATA Raid Mother ASUS A7N8X-E Deluxe, for Windows 7 Ultimate.
Answer:-
http://support.asus.com/download/download.aspx?SLanguage=en-us
So go to the above link of Asus website and download it? If there are no Windows 7 specific drivers available, download the Vista drivers.
View 2 Replies
View Related
Dec 7, 2009
Before I buy Windows 7, I would like to know if my Promise Ultra100 TX2 IDE Pci card will be detected and work? I only have a single ide channel on this mobo (C drive & DVD), and need this card to work for my other two hard drives. I'm 71 years old and don't have the money to replace this with sata drives. Or just stay with XP & Ubuntu?
View 4 Replies
View Related
Jun 30, 2009
i installed windows 7 but i cant see all my others disks , they connect to a promise Sata150 TX controller , on the website i found drivers just for XP but nothing else.
View 0 Replies
View Related
Nov 2, 2009
I have a Rock Quaddra Ti laptop - Its really a Clevo D880p. Sager also rebranded it. It has a RAID controller which my hard drive is connected to. Im not using the RAID functionality in any way.
When I try to install windows 7 from XP, it says that the PROMISE TECH ultra IDE driver is required. It then offers me the option to browse to it to conitnue my update.
Unfortunately I can not find any Vista or Windows 7 drivers for this piece of hardware. Its rather surprising as it was quite a popluar laptop at the time, very well known for its power.
Can i just skip this stage, and the drive still work? Or does anyone know of a solution? The laptop is 6 years old - surely someone must have updated theirs with vista and must have a windows 7 compatible driver?
View 1 Replies
View Related
Jan 14, 2009
I laid down 7 last night (hmm, thinks of that star trek character 7 of 9 but I digress) on my Asus P6T deluxe on a spare drive no problems. Installed ATI catalyst driver, works fine, I have 2 SAS drives configured in a stripe with the on board controller from Marvell, and I can’t get this bloody driver to install. Anybody have any luck with this?
View 4 Replies
View Related
Feb 11, 2012
locating the P5N-T Deluxe LAN driver.I've looked on the website but doesn't say anything about LAN.
View 1 Replies
View Related
Aug 31, 2009
i need drivers for my ASUS M2N SLI-Deluxe Mainboard (Windows 7 64bit). the ASUS Support told me that drivers will be published if seven is officially released. What can i do to find drivers?
View 4 Replies
View Related
Dec 17, 2009
I've looked at the asus website and they don't have an audio driver out yet for windows 7. I have tried using the windows xp and vista one just to see if those would work. Neither did.
The problem I am having though, is that I can only use my Left and Right front speakers, I can't use my C-Sub or rear speakers at all. When I run the windows 7 sound wizard or whatever I can click to test the speakers and I hear the sound coming from them so I know that they are working but nothing else will play on those speakers.
Currently I have uninstalled all of the asus audio drivers so I'm just running whatever came with windows 7 ultimate.
ASUS M2N-SLI Deluxe AM2 NVIDIA nForce 570 SLI MCP ATX AMD Motherboard
A-DATA 2GB 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Desktop Memory Model ADQVE1B16
Seagate Barracuda 7200.10 ST3250410AS 250GB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive
AMD Athlon 64 X2 6000+ Windsor 3.0GHz Socket AM2 125W Dual-Core Processor Model ADX6000CZBOX
XFX PVT94PYDDU GeForce 9600GT XXX 512MB 256-bit GDDR3 PCI Express 2.0 x16 HDCP Ready SLI Supported Video Card
Rosewill Xtreme Series RX950-D-B 950W Continuous @40°C ,80 PLUS Certified, ATX12V v2.2 & EPS12V v2.91, SLI Ready CrossFire
View 3 Replies
View Related
Feb 12, 2012
I can't find it anywhere. Is it included in the chipset driver?
View 1 Replies
View Related
Sep 8, 2009
I've been getting a lot of internet hangs that require multiple retrys to get the website and programs 'not responding' for 20-30 seconds, though the latter has lessened since install.
It's been suggested that I update the chipset drivers and see if it helps. The problem is I can't seem to find updated nVidia chipset drivers for Windows 7 (32bit, though I probably should be using 64 so I can access the rest of my 4Gb of RAM).
I've spent the better part of the day looking for them. If anyone knows where they can be found (the 64 as well if possible) a link would be greatly appreciated.
View 9 Replies
View Related
Jan 16, 2012
i need driver for ASUS P4C800-E Deluxe a sound driver for windows 7
View 3 Replies
View Related
Aug 31, 2012
Asus m2n-sli deluxe audio driver windows 7?
View 1 Replies
View Related
Oct 7, 2012
find the audio driver for the mother board Asus M2N SLI for Win 7?
View 1 Replies
View Related
Nov 2, 2009
I had no problem finding my drivers on the ASUS website, except for the Wifi drivers.
I moved my computer to another room a couple of months ago, and the old room has since changed into something else.
Running an Ethernet cable along 50' isn't really an option.
If anyone can provide me with some help with the Win7 drivers for my Wifi on my motherboard, I'd be greatly appreciative.
View 3 Replies
View Related
Jan 4, 2012
I can't find a driver for the Sharp AL-1655cs Printer for Windows 7 Deluxe Home Edition.
View 1 Replies
View Related
Aug 10, 2010
Very little, all the parts were shipped here about four days ago and I spent a couple of hours putting them together. I ran into a hiccup when Windows 7 Home Premium would not get past the extracting phase of the installation, kicking up the error in this thread. I began the first install on a 20GB partition, when that failed I tried just installing it on a single partition. When that failed I tried removing all the partitions and just installing on the unformatted drive, in it's entirety (seemed weird but others said they had luck with this).Testing Methodology:
At the end of each attempted solution I tried to install Windows again.My keyboard is a USB keyboard. All of my boot testing is done with a bootable USB that I have running MS-DOS 6.22. What I Have Tried:Solution 1: First I went into the bios and changed the SATA controller from AHCI to Raid SATA Result = FAILEDSolution 2: I tried burning OEM Windows disk from Microsoft to an iso at the lowest speed possible for my DVD burner (4x).Result = FAILEDSolution 3: At this point I had created and deleted so many partitions I was concerned it may be having an effect on the install. So I went to Samsung's website and grabbed their HDD utility tool. I figured let's kill two birds with one stone and test the drive while also restoring it to it's original state. So I did a low level format and then ran the HDD diagnostic. All came back with no errors. Result = FAILED
On to memory...Solution 4: I downloaded Microsoft's Memory Diagnostic Tool and let it run overnight. It returned no errors. So I decided to use MemTest86 4.1 and let it run for 10 passes, I did find errors then. As of now I am running each module of memory one by one to determine if it is a problem with them or the sockets on the motherboard. So far I have been unable to reproduce the errors I got when both modules were running together. As a precaution I double checked the motherboards specifications on the socket order for memory, all is to specs. Result = [PENDING]What's Next:After my current memory test ends, I plan on checking my BIOS to see if the correct memory speeds were detected in the auto detection. If at that point I'm still unable to reproduce the memory errors, I'll put both memory modules back into the system and run the testing again to see if I can reproduce the errors I got the first time.
View 9 Replies
View Related
Jun 27, 2012
Yesterday I had a PC technician around to see why my PC was not booting-up properly and also to change my SSD to a larger SSD. As I am visually challenged I cannot do hardware upgrades etc, so I got a Techie guy in. We used Zinstall HDD by-the-way and I would highly recommend this application for such a job plus, it is extremely fast.Anyway, while he was diagnosing my boot-up issue he discovered I had a malfunctioning network card; while removing this, he noticed all the SATA settings were set to SATA 2.When he reset these to SATA 3, the PC would not start-up! When he set them again to SATA 2 there was no problem and it worked fine?
View 9 Replies
View Related
Aug 10, 2011
i want to make my spare sata hard drive as a slave my master hardrive is also satahow to do it . my OS is win7
View 4 Replies
View Related
May 7, 2011
i purchased a Silicon SiI3512 SATA Raid Controller purely to have 2 extra SATA ports which I am using to connect to my case's external drive bays. I have flashed the bios of the controller and updated the driver to put it in "Base" mode so it is not using RAID. I did extensive research on this and it appears that I have this part right. For now, I am trying to connect a WD1600BEVT 2.5" SATA-II hard drive to one of these ports and am having some difficulty. I can see the drive, but when I try to format the drive in Windows, or a command prompt (using the windows recovery DVD) it hangs. I am wondering if this is a compatibility issue with a SATA-II drive on a SATA-I controller, however, most of the forums I have read state that if there is a compatibility issue, the controller won't even recognize the drive. I searched around to see if there was a way to force the HDD to SATA(150), but the jumpers on this drive are for SSC and RPS. Is there a way to fix this or do I need a drive that is capable of forcing SATA-I speeds? Perhaps even a controller capable of at least SATA-II since that is the minimum of all new HDDs?
View 5 Replies
View Related
Nov 24, 2009
Does any one know how to install sata drivers After XP has been installed?
I have a HP DV6150CA and I have to disable my SATA NATIVE from the bios just to be able to load XP.. But when I dual boot to Win 7 I can use it, disabled or enabled it works either way...
View 2 Replies
View Related
Apr 1, 2011
...every time I boot my system, Windows says it is installing the SATA driver. BIOS entries are OK, once drivers are installed, Disk Management shows everything OK too. So, what could be the cause for this? I have two disks, the System SSD (OCD Vertex II 60GB SATA) must have its driver installed to boot Windows, so the msg must refer to the second HD (Seagate 1TB SATA
View 1 Replies
View Related
Nov 5, 2009
I've just bought parts and collected a new PC system. My Motherboard is AsRock M3A785GXH/128 ASRock > Products > M3A785GXH/128M
and regarding to the manufacturer it should be Windows 7 hardware ready.
But I can't install Windows 7 pro 64 bit on my new system. The Windows 7 installation application can't see my harddrives and want a driver to them. I assume that should be a driver for the SATA controller on the motherboard. I've tryed to use the drivers on the motherboard cd-rom and tryed to use the drivers froms asrock homepage, but Windows 7 wont accept them.
I have contacted AsRock about this issue, but I'm wating for an answer and hoped that you guys might has seen this problem before, and will answer quicker than AsRock Support
I should say that I cant install Windows Vista Business 64bit without any problems at all.
View 9 Replies
View Related
Sep 21, 2010
As I look around to gather drivers for a new install of Win 7 Pro from XP Pro, I am having a problem, the inf file. Does Win 7 have the inf file for GA-965P/DS3? I am also not sure about the SATA driver for the Gigabyte controller, since this is the one my sys HD is connected to; the ones I have on the disk that came with the mobo...earlier than Windows 7.
View 4 Replies
View Related
Feb 25, 2011
I have an asus m2n32ws pro motherboard and am running win 7 ultimate 64 bit and have a problem device _ it is a sata controller that has no driver and i have searched and cannot find out a what the device is nor b a driver anywhere
View 6 Replies
View Related
May 12, 2012
Driver sata samsung HM250HI?
View 1 Replies
View Related
Jul 4, 2012
I bought a usb 2.0 to sata / ide so I could connect my old external hard drive from my old Windows XP computer to my windows 7 laptop. The USB 2.0 only wotls with Win 98, XP, ME and 2000. I need some thing that I can use to connect it to my Win 7 notebook.
View 4 Replies
View Related
Mar 30, 2012
When I open the PC, my hardrive and DVD rom was detected in bios but when the operating system started it shows the windows logo then after a second it shows a message that "the driver not found. Im confuse because i have only one hardrive which is the win7 installed on it. How can possibly that the PC did not find this driver but it shows the logo of win7?
View 1 Replies
View Related
Jul 28, 2009
I´m trying to install Seven x86 on Abit NF7-S v2.0 with Sata HDD (non RAID), tried several drivers but didn´t work.
Have you got some working driver for this old chipset? The sata controller is SIL3112A.
View 1 Replies
View Related
