Plug And Play Not Working After Windows 7 Updates?
Jun 5, 2011
I have actually had this problem every time I've re-installed the OS and can't seem to figure out how to fix it. When I install Windows 7 x64 and plug in my mouse or printer right away they will discover the drivers and work automagically.After I go through the Windows updates they just don't seem to work anymore. The only thing I've been able to do to get them to work is run this little MS program(http://windows.micro...ith-USB-devices) I found that apparently forces what I have plugged into the USB port and isn't responding to install drivers and work. I just don't know what to do so I don't have to run this program any time I try to plug something into the USB ports.What's kind of strange is I have an external drive that I plug in and it works before and after the updates without running that program. Anyone have any idea what might be wrong?
Using a HP Pavilion g7 1075dx Notebook PC just fyi.dit: Actually I just tested unplugging the mouse and printer after they were working, restarting the system, and trying to plug them back in again. They don't work again. So as it stands I would have to run that little MS Fix It program every time I plug them in to get them to work.
View 1 Replies
ADVERTISEMENT
Sep 2, 2012
I have a few peripherals that have not been working via plug and play and I was wondering if there is a setting I need to change.I have done some search over the internet but have yet to find a solution thus deciding to post here.
View 3 Replies
View Related
Nov 15, 2012
My Inspiron does not recognize usb hd drives when I plug them into a port. This is Dell is using a Windows7 update that was installed over the original Vista software. My backup is stored on a Maxtor USB drive and I need to access it to retrieve some files.
View 1 Replies
View Related
Sep 14, 2011
Pluga nd play device MpKs19b929c7b is not working on my windows 7.
View 2 Replies
View Related
Feb 25, 2012
How do l reinstall TCP/IP Protocol Driver
View 1 Replies
View Related
Apr 4, 2012
I get home from work and my mouse and keyboard stopped working. I tried uninstalling and reinstalling USB controllers but no luck. They are both plug-in-play. Really not enjoying Win7, might go back to XP.
View 4 Replies
View Related
Jun 30, 2012
i have got a problem with my non plug and play diver (BHDrvx.sys), here is a yellow mark above it.... my systems performance is very weak due to this.
View 1 Replies
View Related
Apr 26, 2010
i got a problem with my PlugPlay service in Windows 7 Ultimate x86, when there has passed about 12hours more or less somethings it goes crazy like this:[URL]
View 9 Replies
View Related
Dec 12, 2012
How installed bluetooth plug & pay driver for window 7
View 1 Replies
View Related
Jul 18, 2011
ive done something rlly daft lol, in an attempt to fix windows firewall i have uninstalled the Windows Firewall Authorization driver as it said it had a problem with it prior to thinking how can i reinstall it
View 3 Replies
View Related
Jan 19, 2012
I have a problem with my laptop. After I put it in stand-by, when I turn it on again I have the CPU at 50% for 3-4 minutes until it finally goes to 0 again. From task manager, I can see that this is due to a svchost.exe, relative to several services, like Plug & Play and DCOM launch..
I think it's because of the Plug & Play service.. I've already unchecked any sound enhancements from control panel, updated any driver and there are no viruses or malwares..
View 7 Replies
View Related
Sep 20, 2011
this is the non plug and play device:MpKslfb578323
View 2 Replies
View Related
May 19, 2012
I'm facing the problem of plug and play during the installation of my printer, my printer is HP Laser Jet m1120 mfp, how can i fix it?
View 4 Replies
View Related
Jun 8, 2011
i am trying to reinstall the Plug and Paly Software Device Enumerator, I unistalled it because I had the Yeloow triangle. Accordingly, I tried to follow the common steps ( machine.inf file...add hardware device system device.. download Plug and Play ) but it did not work, saying cannot find file. I tried it several time but with no success.
Is there any solution for Windows 7 to have back the Plug and Play Enumerator.
View 1 Replies
View Related
Jun 10, 2012
I have 4 outdoor video cameras, which i want to view/record ALL on ONE screen-cant figure out what peice i need to split the screen 4 ways,or how to about hooking up...& how do i view them on different locations in my home after i get this done?
View 1 Replies
View Related
Aug 12, 2011
Recently took out my laptop HDD and formatted it, NTFS format, and stored stuff on it. Now when I place that in an enclosure and want to use it as an external HDD drive, it doesn't pick up the device. Through Diskpart I am able to give the drive a letter and access it, but when I "Safely" remove device, the Drive letters remain....
- Do I need to do anything special to make the Device a Plug and Play?
- How do I remove the Drive Letters that I assigned through Diskpart from "My Computer"?
View 1 Replies
View Related
Aug 15, 2011
My Computer: HP G60-235DX. Windows 7 64-Bit. Basically, I have no Plug and Play Software Device Enumerator under system devices in the device manager. This is causing problems with other things as well (I am pretty certain the below problems are caused by the missing enumerator. How can I reinstall it? I've tried to reinstall the chipset from HP but to no avail.
View 3 Replies
View Related
Oct 24, 2009
I am currently running a tablet netbook with Windows 7 pro x32. It's not powerful enough to run photoshop very well, and my license wouldn't let me put it on there anyway. However, this netbook is a tablet. I'd like to use it for graphics, as it has a Wacom digitizer.
What I'm interested in doing is running a VNC to access my desktop (running Windows 7 pro x64) and be able to control photoshop from my tablet.
Currently, I've tried Windows Remote Desktop, and while it works fairly well, two things are wrong:
1) Mouse/Tablet input seems to be compressed. This turns my curves into straight lines unless I go reeeeally slowly. Is there any way to change this?
2) There seems to be an option for plug-and-play drivers to be transferred, is there *any* way to make pressure sensitivity work?
I have looked into other solutions, such as TightVNC, UltraVNC, and LogMeIn Free, but VNC isn't very secure (and I don't want to deal with SSH tunneling) and LogMeIn Pro is expensive, while LogMeIn Free is limited.
On that note, I haven't been able to find out *anything* relating to the security of Windows Remote Desktop. Is it encrypted, or what? Security is important to me, as I am running both the desktop and the netbook on networks that I have no control over, and are inherently insecure.
View 2 Replies
View Related
Sep 14, 2011
USB Dongle Bluetooth Plug and Play 2.0 Activation Code
View 1 Replies
View Related
Aug 25, 2011
Are mice and keyboards plug-and-play for laptops (automatically detected and ready to use)? Or will it require driver installation of any sort? I have a Dell laptop and will be buying a Dell keyboard and mice...
View 4 Replies
View Related
Sep 14, 2011
windows says the container for plug ins has stopped working a bunch of times. havent noticed any problems but don't know what that means. when I click search for solutions it does not work. is this something I should care about or just ignore?
View 5 Replies
View Related
Jan 26, 2012
So first I get this message when I mouse over the speaker icon(notice the red "x" on the icon).When I click the icon, Windows does a diagnostic and then this shows up.This is whats listed in my playback devices and this is with "Show disabled devices" enabled. Everything is enabled,Here is a picture of what my device manager looks like.
I've tried installing drivers for my sound card and my chipset, I tried restarting my computer, updated from my device manager, uninstalled drivers, reinstalled, etc. I've been searching online for a bit and nothing I found worked so I figured I'd give this a shot. I tried uninstalling the service pack update but that didn't work.
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Ultimate, 32 bit
Processor: Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz, x64 Family 6 Model 23 Stepping 7
Processor Count: 4
RAM: 3198 Mb
Graphics Card: NVIDIA GeForce GTX 460, 1024 Mb
Hard Drives: C: Total - 953766 MB, Free - 300816 MB;
Motherboard: Gateway, G33M05G1
View 6 Replies
View Related
Nov 8, 2011
Basically, i used to be able to use my fast forward, pause/play, stop, and volume control buttons to control my itunes and the volume.now, the volume control does not show the bar on the screen that shows what level the volume is at when it's changing volume, and my pause/play, fast forward, rewind, and stop buttons only work when itunes is the main window.it used to control itunes even when itunes was in the background.
View 3 Replies
View Related
Dec 10, 2012
Installed a new hard drive and did a clean install of windows 7 on it. Installed the the drivers from the recovery cd and I get the message " windows update cannot currently check for updates because the service is not running".
View 2 Replies
View Related
Nov 1, 2011
Just a short rant please...just purchased a new Windows 7 Home Premium 64 bit and I cant count the hours I have spent in trying to get this thing to work correctly. Had an XP until it couldnt run no more, hated to move to anything else and thus far my experience confirms that fear.I have an HPE-519C and its a couple of weeks old. My current problem is that auto play doesnt work when I insert a fill in the blank, DVD, CD, data disk, anything.
View 6 Replies
View Related
May 9, 2012
Yesterday, I got a balloon notification saying that there were some Windows Updates available. I like to keep my PC up-to-date, and since I wasn't in the middle of anything urgent I had my Windows 7 32-bit PC download and install them. WU asked to reboot my computer, so I got to a stopping point and clicked reboot.When I rebooted my PC, my 2nd monitor stopped working and wouldn't detect.So I downloaded installed the latest drivers and restarted, nothing. Tried rolling back to a restore point before the updates, nothing. Uninstalled the video card and rebooted, nothing.
I have an ATI Raedon 3600 Series video card, installed into a Dell Optiplex 360, running 2 Dell 19" LCD monitors. Nothing super fancy or extravagant going on hereI am a bit at a loss. I was going to maybe take out the video card and try reinstalling it physically and "softwarically". But I do not think that will aIt was working fine for months, and so I am guessing it has something to do with the Windows Updates that were installed.
View 2 Replies
View Related
May 16, 2011
I installed explorer 9 on a Win 7 64bit system. It seemed to work well until I installed the recommended updates, over 70 of them. Now when I start Internet explorer it seems to be coming up but it leaves the main window white with no other information.
View 1 Replies
View Related
Jun 19, 2012
For the past day windows wants to install the same 4 updates over and over, I have windows update set to download and let me choose when to install.
I can't understand why I even need them, as I uninstalled net framework. Notice how the update at 8:17 AM., KB2656368, is the same as one of the 4 updates installed at 7:47 PM. Windows wants to install the same four kb files again.How do I stop this?
Security Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x64 (KB2656368)
Installation date: 6/15/2012 7:47 PM
Installation status: Successful
[Code].....
View 7 Replies
View Related
Mar 21, 2012
i update to SP1 yesterday, and today when i hit the power button i notice the computer takes longer to hibernate, i pressed a key and the screen came back with my session welcome screen. so the computer never went to hibernation, i disable re-enable powercfg -h off/on, change power settings, all drivers are up to date and haven't been touched for months, (this is the first time this happen to me), the SP1 (yesterday) and 7 updates more after i instaleld the SP1, that was everything new in this computer
View 6 Replies
View Related
Mar 17, 2012
I have just reloaded Windows 7 and set up WinMail, after Windows updated 100+ files WinMail now doesnot work
View 6 Replies
View Related
Apr 15, 2011
My mouse has stopped working after i did some window's updates!, it's only a �4 mouse from asda in the UK, but was working fine before i did them. I went into my task manager and 2 of the USB's have warning's on them? Also this is the latest update that's killed my mouse.
View 9 Replies
View Related
