Trying to upgrade from 7022 to 7100 RC1, but when I try and copy the installation files from the virtual drive to a folder on my computer, It won't copy setup.exe stating that it needs permission to perform this action, and that it needs permission from Everyone (possibly a user?). AVG also picks up the file as a trojan. :S anyone able to shed some virtual light?
View 3 RepliesI know there have been a lot of tutorial/tips on how to deal with permission when you need to copy files on Windows 7. I have turned off UAC, take the ownership of the folder and all sub-folders/files ... but still I have not been able to copy quite a few files in one of my folder.
Windows 7 (Ultimate/64bit) pop up a warning box saying that I need a permission from myself to be able to copy those files. If I click Yes, it still won't happen.
it says access denied whenever i try to copy any file on my f drive.
View 4 Replies View RelatedI'm trying to copy a music file from my laptop to my pc and i get this message " you need permission to preform this action". How do i give my permission? seems kinda sill not to be able to copy files from one to the other.
View 2 Replies View RelatedI'm having a strange problem in Windows 7. The problem is that basically, anytime I want to copy a file to the C: (OS partition), Windows asks me if I want to continue copying a file there (I am an administrator so I don't know why it should). Also, if I want to download a file to the C: partition, it won't allow me and it'll tell me I have to save it in my username folder, not in the C: root. According to the persmissions, administrators have full control but I'm still asked if I want to copy files.I've tried assigning users to have full control but I get a series of messages like "This file is currently in use, cannot set permission" and access denied for "Program files, Program Files (x86), Windows and C:".
View 2 Replies View Relatedwhile coping file from drive to removable disk system asking for permission and i am unable to copy file andf said access dinied
View 2 Replies View RelatedFor days now, I've been looking to solve an issue I'm having regarding the permission settings. For whatever reason I simply cannot move a specific dll file, I then get the following message : "you require permissions from Everyone to make changes to this file" ==> it says "make changes" although all I want to do is copy and paste the dll file elsewhere...
So far, I've tried running the takeownership program, I've ran Registry Booster (who knows?), of course my user account settings are on "never notify me" AND YET I just can't copy/paste this dll file. I've got all the latest Win7 (64-bit) updates, AVG 9 AV+firewall (which I even turned off), I'm running an AMD Phenom II x4 3.00 Ghz, 4,00 GB RAM...and that's about it I guess.
I am bashing my head and getting nowhere with windows 7....I have 3 users; a, b, and c (say)and administrator; z (say)when logged into z, I want to copy the folder of user 'a' but when I try to do this it comes up with ..."you'll need to provide administrator permission to copy this folder"But...whatever I try and do it will not allow me to copy the folder in question.
View 10 Replies View RelatedI noticed in my Event Viewer that I have literally THOUSANDS of errors with source listed as DistributedCOM and event ID 10016. It logs an error event about 4 times per minute on this.
General info tab says:
"The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID
{0C0A3666-30C9-11D0-8F20-00805F2CD064}
and APPID
{9209B1A6-964A-11D0-9372-00A0C9034910}
to the user *********** SID (S-1-5-21-1873924993-3643908058-657741459-1122) from address LocalHost (Using LRPC). This security permission can be modified using the Component Services administrative tool."
A wire came loose in my laptop charger so I asked for a replacement, but the supplier was adamant that there was something wrong with the port in my laptop, not the charger (he was wrong), so they took it away to fix. Anyway, a member of their staff took my hard drive out to copy a couple of my files to a disk for me as I needed them asap and couldn't get my laptop charging. Apparently that's all they did.Today I got my laptop back and things are not right. I am the administrator and there are no other user accounts on my computer. I am recognised as the administrator when I go on Control PanelAll Control Panel ItemsUser Accounts. But now all of a sudden I can't access Music, Pictures, Videos or Documents from the start menu. It just does nothing and says nothing when I click on them. I went on 'Computer' and tried to access them from the 'Libraries' menu at the left side. It didn't let me and didn't come up with any error message. It also didn't let me see the properties of them or do any of the other right-click options. It was saying at the bottom that they were completely empty, so I just deleted them and thought I'd make new ones with the 'Create Library' option. But when I go on this it says "Unable to create the file 'New Library.library-ms' Access is denied". I tried to restore the four Libraries from my recycle bin. It came up with a message saying "You'll need to provide administrator permission to move this folder". I clicked on continue, then a box popped up saying "Destination Folder Access Denied. You need permission to perform this action". Permission off who?! It's MY computer!
When I located my files the long way (Computer - Windows (C:) - Users ... etc.), all my documents were read-only and had a padlock on their icons, so I changed that. It won't let me view my pictures (says I don't have the correct permissions to access the file location). I can copy and paste the pictures so that it will let me view the copies, but it says things like "You'll need to provide administrator permission to copy this file" for everything I try to do. It gives me the option to continue, but it's annoying me because I have to keep giving permission for things that it should just let me do.
I have 2 programs on two seperate computers where UAC comes up and asks me if I wish to run the programs. These programs do not require administrator rights (Truecrypt and iSpy) and the check beside "Run program as administrator" is not checked in either the shortcut or the actual executable file.
View 3 Replies View Relatedi am trying to create a new site in dreamweaver. the site will have a coldfusion extension (.cfm). i am the only user on my notebook so i have complete administrator privileges. however, when i try to save the site in the c:inetpubwwwroot folder (because that's where coldfusion applications are saved) i always get an error.the error says: "you don't have permission to save to this location. contact the administrator to obtain permission" i thought i was the administrator? i am unable to change the settings in the security tab in the properties panel either. that is the extent of my troubleshooting capabilities.
View 4 Replies View RelatedI have one internal drive with 1 TB. The data there is very important to me , so I bought External removable drive for backup. Now, I want to copy the data from one drive to the second drive but I have to be sure I have a perfect copy of the data. The data is mostly songs movies and documents. I'm using windows 7.
My question is this:
1.If I'll transfer the data through windows 7 by copy and paste, I could be sure i have a perfect copy? 2.There are tools for comparison Between the original data to the data that was copied?
What is the best free program that can copy discs to ISO files and also burn them, even if they are copy protected?
View 4 Replies View Relatedone of the netbooks was plugged in to initially power it up, but then hard-shut-down before Windows could run through its initial setup.Now when I boot up the netbook, and it attempts to go through the initial windows setup "Setup is starting services", and then throws an error message: The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click "OK" to restart the computer, and then restart the installation.I restart, and the cycle continues. This happens whether I try to boot normally or in safe modeI've got no CD-drive attached to it, so I'm not sure what I can do to break this error cycle.
View 6 Replies View RelatedHow can I get Windows 7 to name copied files using the scheme "Copy of" (used in Windows XP and earlier) instead of the default scheme "- Copy", whenever a file is copied to the same directory as the original file?In other words, if you copy a file named "Foo.txt" in a directory to the same directory, Windows XP would have named that file "Copy of Foo.txt", but Windows 7 names the file "Foo - Copy.txt". I want the copy to be named "Copy of Foo.txt".There are several reasons why I prefer the XP style file name:
1. It is familiar :-)
2. I have existing files that use the XP style file names, and I want all my file copies to use the same naming scheme. I guess I can do a massive file rename across all my backups, but that would solve only one of my problems.
3. Most of my folders are sorted by name, and using XP style would sort all copies together. On other forums it has been suggested that one can simply sort by date (to get the copies sorted together), but that advice assumes that all copies are created after all other files are created, which is actually not often the case.
4. I often work with long file names, which means that the end of the file name is often obscured, unless I have wide windows (not always possible) and use lots of horizontal scrolling every time I want to select a file. Hovering over a file to get its full name is a cumbersome solution.
5. On other forums some have given the advice to always make copies in subfolders, but I often make copies or copies of copies while I work (it allows me to roll back or to check earlier versions of a file quickly, during my work), and using subfolders would slow me down tremendously (not to mention confuse me).
I know that when TeraCopy is made the copy handler, it renames files in a different way than Windows 7 does, though unfortunately not the way Windows XP did it. Also, if one installs a third-party directory program such as Opus, it asks for a file name every time a copy is made, but I need something that simply names the file correctly immediately.
I have installed windows 7 evaluation copy build 7201 and i want to find out if i will be able to upgrade it to the original copy and how? Any suggestions?
View 3 Replies View RelatedWhen I try to install some programs and drivers i get error: 'Setup will only run in administrator mode. setup is aborting.'. I only have one account which has administrator rights. I have already tried to enable and disable UAC, booting in safe mode, run as administrator, enabling original administrator account, adding permissions, taking ownership, changing compability mode and other but nothig is solving my problem. I'm running windows 7 x64 build 7000.
View 4 Replies View RelatedNot sure what happened, but it appears I can't make changes like delete files or run programsI am logged in as an administrator, and have been through the Security section of right clicking a file or folder to allow me to make changes to no availTried something called Subinacl to change permissions but that would not install - tried in safe mode too.How do you set permissions to default
View 4 Replies View RelatedI searched everywhere on the internet and nothing works. I need to take ownership or a file so i can delete it but it does not let me. Command prompt does not work. It's really starting to annoy me that I cannot delete these files.
View 3 Replies View RelatedI uninstalled PC doctor software (it monitors software activity), now Im asked permission for a number of software programs on bootup C Cleaner Superantispyware and a few more, the message says words to the effect "A program wants to make changes to your computer, they are all trusty worthy software but I don't want to be asked about them every time I use my PC. I looked at User account control settings they are set at default. I was reluctant to change them as I'm not that tech savvie Running Win 7 home premium
View 1 Replies View RelatedWhy is it when I want to delete some files my computer says you do not havepermission to do this or you need permission from somewhere else to do thisThis is my home PC and I am administrator, how can this be fixed as it is so annoying.
View 2 Replies View RelatedOne thingthats just killing me with Windows 7 is the rights issues. I supposedly have full admin rights and this is my home PC and the only other account is guest. I have run that reg file that gives you the take control option on the right click menu. But there is just no end to prompts telling me i can't do this or that or shouldn't etc etc.
View 9 Replies View RelatedSince a re-install of Win 7, everytime I boot I get a UAC pop up asking if I want to allow Windows 7 Upgrade Advisor to make changes to my system. Even though I select NO it keeps coming up at each boot. Do I really need to have this program installed and/or how do I stop that from coming up each time?
View 3 Replies View RelatedWhen I try to install my new Kensington USB Display Adapter(sort of a video board) on my recent (2 weeks old) Lenovo "ideaCentre B3" computer I get this error msg. "Error opening installation log file. Verify that the specified log file location exists and is writable."
Windows7 home Premium, 64 bit
Kensington said download new "Setup.exe" file when that gave same error, they said not our problem go away. also tried run as admin - same problem!
Lenovo said software is not under warranty it will cost a lot of money to troubleshoot - call microsoft.
Microsoft said this is an OEM product call Lenovo.
I got my new computer --Dell Inspiron 580 with Windows 7 professional 64 bit. I successfully transferred all of my files from the old computer to the new.But, when I try to access my Music folder or Videos folder, I get a pop-up stating "You don't currently have permission to access this folder". I tried making the necessary changes but still denied even though I'm on it as Administrator.
View 10 Replies View RelatedI am running Windows 8. I know this forum is for Windows 7, but the Windows 8 forum is under developed and doesn't really have any members yet.I am selling my laptop, so I'm installing Windows 7 since I have Windows 8 now. I was going to install it off a flash drive. Every time I go to try to transfer the Windows 7 Starter files onto the flash drive, I can't transfer 1 file. It says I need to permission to move it
View 2 Replies View RelatedAfter 35 years of using windows products I have come across another one that leaves me in the dark. Maybe its old age (74). Can you help a senile old man?I am using Chrome and I want to listen to AOL radio. It plays awhile then I get a message that flashplayer has crashed. Flashplayer is enabled. This is a constant problem with Chrome. Pain in the butt.So I start up IE 9 thinking I will listen to AOL Radio. IE9 cannot find AOL Radio. In fact it says I am not connected to the internet. I am connected 24 hours a day and the MSN web page comes up before the message I'm not connected. So how could I not be connected to the internet?So, I decide I will try Firefox. Have not had it for a cupola years because of previous firefox problems. I download it from File Hippo with my Internet Download Manager.I open it, it extracts, then I get a message that says I may not have permission to run the program. It asks me to check one of two boxs. One with my user name or Administrator with a password. I don't have a password, but neither boxes work, no matter what I check. I am not allowed to run Firefox.Is there something new with Firefox that you have to have permission to run it?No. I do not have any bugs. I ran Avira & SuperAntispyware.I only use IE for updates. I use Chrome as primary browser. I am the only one that uses this computer.
View 9 Replies View RelatedFor some reason my hard drive has gone nuts. It said on startup that there were bad files then proceeded to delete then restore. At the end it was removing some error security number and applying a new one to almost 50000 files. When it started back up the drive icon was gone and the square box with the little circles was in it. Then it stated I couldn't delete anything as the waste basket was in error. Fixed that manually and finally got the icon back. NOW the problem is any time I access a folder it says I don't have authority and then that damn little lock appears. I have tried the fix PER FOLDER but the whole drive is acting this way, even files that are NOT in folders state I don't have permission and then I go through the whole process and it fixes THAT file. I NEVER HAD THIS PROBLEM BEFORE NOR DO I HAVE IT ON ANY OTHER DRIVE.... IS there a way to enter the proper info in ONE TIME and have it globally apply to ALL the files on that hard drive?
View 3 Replies View RelatedNot to long ago, I removed the HD from my laptop and slipped into an enclosure so that I could access information I had saved. When I initially did it all, I thought it was just a matter of connecting the enclosure to my tower and having it pop up like it would on a USB. Little did I know I needed to obtain permission and take ownership.After reading and searching for some time, I came across the below link, and followed the direction: You don't currently have permission to access this fold When I click on the folder and then properties, everything as it should be. I even followed the exact same steps provided in the below links as well, but to no avail:
- Change the permissions and take ownership of your files and folders | Windows Vista, XP and Windows 7 Tutorials
- I dont have the "correct permission" to access any of my - Microsoft Answers
- Windows 7 Take Ownership & Grant Permissions to Access Files & Folder
I don't know, and am at a lost right now. For example, when I click on a photo from my laptop HD, it states "Windows photo viewer can't open this picture because you don't have the correct permissions to access the file location."
After I make a full system backup in Win 7 I move to the WindowsImageBackup directory. I try to move down the chain to the directory named after my computer. But when I try to move down the chain I get an "You do not have permission" message. I am an administrator and I am able to get around the message but I'm just wondering if there is something I can do to not make the message pop up each time.
View 1 Replies View Related