I am having an issue with some of the sites i got to like wowhead, facebook to name a couple where they only load the template but not the actual information. I attached a picture of what I mean. Things I have tried so far is disabling firewall for a moment and reloading the page this did nothing, have tried loading on firefox, chrome, and IE (most recent versions of all) It has been about 2 weeks that I started noticing it and its becoming very frustrating. I also tried reinstalling flash player as that is the only thing that has been changed in the last two weeks on my computer.
I'm having a strange problem that I have never seen or heard of. Every time I try to do anything in windows 7 that requires an internet connection, it gives me a "Page cannot be displayed" or "Page not found" message. The only way I can get some pages to load is to refresh them several times, after wich they will finally load.It is not just a problem in IE8, as Chrome, and firefox do the same thing. Windows will not update anymore as it cannot get a connection, and I cannot purchase items from steam or itunes because they give me a "cannot find a secure connection" error. I recently reformatted and the problem still persists. Other PCs on my network do not have the same problem. I recently moved all of my components to a new chasis, and am wondering if the ethernet port or controller could have been damaged
I was using Google Chrome and it just suddenly wouldn't load ANY pages. My internet is working fine. So I used Firefox instead, as that seemed to be working fine. But today, that's being really slow. And most of the time goes into "Not responding." if it needs to load something like a video.
I just formatted my windows 7 a month ago and re-installed it . Few weeks ago i changed my modem to Netgear N150 modem + router . After that Most of the websites don't load . Eg : Facebook , yahoo , ms support , etc . I was scanning for any malware or virus but i didn't find any . And i hardly installed software in my computer . Even this forums is not loaded fully . My connection is really bad its oly 512kbps connection but most of the websites load in >10secs but now a days in any browser they are not loading at all. Not loading in the sense they are loaded half or not at all . Otherwise the loading thing is going on and on . It never ends. I checked my connection speed with speeedtest.net and got 524kbps which is my speed . When i download things i get the correct downspeed which i used to get early . But now most of the website are not loaded . I have norton and malwarebytes installed scanned the computer like ten times now . I first taut that dey both wer blocking web traffic and so i shut them down and i didn't find any improvements
I have a one year old HP 2000 Notebook PC with 3gb ram, using windows 7 home premium with internet explorer 9, with Comcast as an internet provider, using an Asus wireless router. The problem Im having that is driving me NUTS is that randomly web page wont load, I get internet explorer cannot display the webpage error and when I look at the task manager I notice that the cpu usage has dropped below 10%. This happens quite a bit all day long, Ive searched all over the net and cannot come up with a solution. Does anybody know what could be causing the low cpu usage and pages wont load?
My HP desktop with Windows 7 and IE9 has had issues on some websites since I've had it. The issues are that some pages will not load completely or load at all and the back button sometime will work and sometime it will not. All of these issues are random and intermittent on the same sites. Sometimes the refresh button will work and sometimes it will not. It seems that if they work at all they should work all of the time but I don't know enough about computer systems to understand. Some say I should change to another browser. I've tried Google Chrome and Firefox and they have their problems as well. I know I can't be the only one having these type issues. I delete cookies on a regular schedule.
You fixed my infected laptop quite a while back, (GRINGO) I think.cant remember how I was directed to the site.My laptop is playing up again, it is really slow and does not feel right.It takes a while to load explorer and other web pages and a long time to run some applications.I have tried virus checkers and malaware removers but when i did it found and removed some trojens but I think it is still infected.
I have internet access, but when I am in normal mode it says that the page took too long to load so it couldn't connect to it. I have tried nearly everything, but nothing so far. When I am in safe mode, I can view any page. So that's how I am able to post this
i started up my pc today, everything was cool. i went out for a bit and when i came back, the internet was going horribly slow. pages show in text version, some don't load at all. Internet keeps giving me the 'there was an error loading the video, please try again later'. i ran a speedtest.net check, i'm getting 4mbps, i normally get 9 or 10 but 4 is fine for me. i'm not downloading anything and the only internet connected program i'm running is chrome.
I was browsing the internet on my firefox when suddenly the links that i opened up where not loading at all. All it had was a blank white screen. I restarted the firefox and the computer but it was still not working. The internet explorer was acting the same way. I tried several solutions such as clearing my cache, changing the proxy settings but it froze the windows 7 when doing so.
My anti-virus program that i brought (Trend Mirco) had expired 2 or 3 days ago. I'm not sure if i have a anti-virus, i just downloaded avg for free but when i try to scan the computer it freezes again.
System info:
OS Name: Microsoft Windows 7 Home Premuim Version: 6.1.7601 Service Pack 1 Build 7601 System Manufacturer: Hewlett-Packard System Model: p6754y System Type: x64-based pc
I have the same issue that ShankMcGank had in this thread that is now closed.url...In fact, this site is very slow on every page.I get a message at the bottom of the page that says "awaiting HTTP:// then some ad site (doubleclick.net or google ads etc).This only just started happening about two weeks ago and I have run anti virus, malwarebytes, adaware etc and eveything is clean.
We have our Server running Windows Server 2003. We have 2 other desktop computers running XP and a laptop also running XP connected. We replaced one of the XP computers with a brand new Windows 7 computer. I am connected to the LAN just fine and when you click on "get online," it's says that there's a working connection but when I try to load ANY page I get the "page cannot load" error. Yesterday, the issue was intermittent but today I have been unable to get online at all. I've tried restarting the server and the new computer as well as the router. I've also tried disabling and enabling the LAN. I also tried a "repair winsock" option I found on the forums. All other computers running through the server are working fine so I know it's not the ISP. We didn't change the router so I know it can handle the number of computers we have.
If I connect to my work VPN, then IE refuses to load any pages (inside the work network or outside). It doesn't even appear to try, just goes immediately to "Internet Explorer cannot display this page." I was able to connect to the computer with teamviewer remotely, name resolution worked properly, I was able to ping the web server etc. all fine, even brought the page up in FF and Chrome with no problems. I turned off all add-ins and restarted IE, same deal. If I disconnect from the VPN then IE works fine again. I was running IE9, I tried uninstalling it but having the same issue with IE8.
I've had my standard DSL 6mbps (actually got 5.3mbps) service for a year, no real issues with it. Pages loaded as usual, always been using Google Chrome.2 weeks ago I switched over to U-Verse and "doubled" the speed to 12mbps (getting 10.5mbps). Now everytime i go to any website, doesnt matter if it's yahoo, google, youtue, tomshardware... it either fails to load completely and chrome says it can not find the site, or it will find the site but not load any images as all. Instead I have to keep hitting refresh 2-5 times until everything loads correctly.I tried this on my other PC too, and it does the same thing... i cleared out the cache and downloads so everything would run fresh but it didnt help. I then tried using IE, and still get the same thing.
Is it possible to create a new folder template? As a working musician, the standard music template is not functional for what I do. However, I don't want to change the standard music template as it IS functional for pre-recorded music, which I also have on this machine. The other standard templates (music, general items, documents, pictures, videos) are all in use with files and folders normally filled with such items. So I need a NEW folder template where I can keep my professional music files.
As Windows7 has a feature "Automatic Folder Type Discovery", it will automatically change the folder template of a folder to match the file type of the last file added or saved in the folder. Of course, you can change the folder template to one of General Items, Documents, Pictures, Music and Videos manually.Here is my problem, for example, I have three folders: A, B and C. Folder A is located in D:, B is a subfolder to A, and C is a subfolder to B. (D:ABC)If I change the folder template of A, from General Items to Pictures, for example, the folder templates of both B and C will also be changed to Pictures. AND, if I change the folder template of C to Documents, the folder templates of A and B will be changed to Documents too. There seems to be a bond among the three folders, if I change the folder template of any one, the other two will be changed automatically.At first, I thought the "Automatic Folder Type Discovery" might cause the problem, but after I've disabled "Automatic Folder Type Discovery", the problem is still a problem.
I've installed a 32-bit Metastock program in my 64-bit Windows 7. The program uses lots of templates and I imported them from a 32-bit Windows XP system. They work well but when I create a new template in Windows 7 the icon for that template has a golden lock attached to it. I can delete the template but I can't copy it, edit it, or replace another template with it. There are several posts in this Forum but I couldn't determine if they were talking about the same problem I have and I really didn't understand the fixes recommended. Looks like Microsoft has created a clever but obscure procedure that's hard to change.
Is it possible to create a new folder template? As a working musician, the standard music template is not functional for what I do. However, I don't want to change the standard music template as it IS functional for pre-recorded music, which I also have on this machine. The other standard templates (music, general items, documents, pictures, videos) are all in use with files and folders normally filled with such items. So I need a NEW folder template where I can keep my professional music files.
When I select 'New Email' (to create a new e-mail) or "Reply" the template does not come up on the screen.When I go to the task bar I can see the templates but they won't appear on the screen.
What besides Artisteer software can be used to design templates blogger or wordpress? if there is a freeware, it is better Artisteer is the latest version often experience an error.
Ok, so I created a custom template and saved it as such (.dotx). And when I want to use it, I go File>New>My Templates>APA Format.dotx. All of that is fine, and the template works fine.My question: can I have my custom template show up NEXT to the My Templates folder, Blank Document template, etc. Right now that top row of Available Templates has: Blank document, Blog post, Recent templates, Sample templates, My templates, and New from existing. I want to simply add my custom template to this row of options. That would allow me to select New> APA Format.dotx.If you need a better explanation,
Just this day my printer is printing out a sheet after printing what I want it to print that has the following information on it: filename directory template title author documents & settings how can I make it stop printing the extra sheet..
I have an emu 1820m soundcard installed in my computer. It seems to be functioning perfectly. I can play dvd'd, cd's, iTunes, etc and the sound plays through my speakers without a problem. I want to record some sounds from a dvd but i cant get anything to record. Recording device is set to Wave EMU DSP as the default device. Im using Audacity to record and have set the recording preference device to be Wave (E-MU _-DSP). When I hit record I get an error 'Error while opening sound device. Please check the input device settings and the project template'And I cant record anything.In the built in Windows sound recorder, when I hit record, I get this error 'An audio recording device cannot be found' Everything seems to be functioning perfectly, yet i just cant record anything.
Having upgraded my desktop PC to Office 2010, I need to import three seperate letter template files for use in Word. These were lost during the upgrade but are on my laptop, which still runs Office 2003, as .dot type files and I also have them copied to a memory stick. However, I am at a loss as to how and where to save them into the new programme on my desktop PC. If it makes a difference, I should add that I do not use Libraries and have disabled them.
I dont know if this is posted in the right area but I'm so desperate to get my laptop working its unreal. First it started off with my laptop crashing, I had totally forgot it needed to do a windows update and turned off my laptop in hopes that it would work properly. After that my laptop has not been working. The machine turns on and gives me two options. Start windows normally or do a repair. Upon starting windows normally, it loads so far before sending me back to the two options of start windows normally or repair. On the second time I clicked repair. My laptop then goes so far before presenting me with a blue screen that is usually the screen where my accounts are. The cursor still moves but it loads no further even after leaving it an hour. I decided to make a repair disk, hoping that the problem was because of windows. the disk loads, gives me a choice on the keyboard language then does nothing. I honestly have no idea what to do, I want to keep all the files safe on my computer as I havent backed them up and I have worked so hard on the projects.
Im having a couple problems with my computer, firstly when i boot up The icon for the LAN onnection has a red cross to say its not connected even though it is and it will recognise that it is after approx. 5 minutes and will only say network instead of the actual name if my connection (network99) secondly when i log on from booting up the desktop take a while to load and all the icon thumbnails load slowly one at a time and its really slow.
