PCI Fax Modem Could Not Be Opened - Possible Hardware Conflict
Oct 16, 2012
I want to use Windows Fax and Scan on an HP desktop computer running Win 7 Home Premium. I bought an inexpensive internal PCI fax modem and installed it, which seemed to go without problem. Device Manager reports it is working properly, but when I use the Diagnostics to query the modem I get an error that the port the modem is attached to could not be opened because of a possible hardware conflict.. The modem log reports the following:
10-16-2012 12:20:39.662 - Modem type: PCI SoftV92 Modem
10-16-2012 12:20:39.662 - Modem inf path: oem28.inf
10-16-2012 12:20:39.662 - Modem inf section: Modem3
10-16-2012 12:20:39.662 - Matching hardware ID: pciven_14f1&dev_2f30&subsys_205114f1
10-16-2012 12:20:39.724 - Opening the modem device failed with error 000005aa
The computer has no built-in COM ports (strictly USB), and the modem, like almost all internal modems, installs iteself on virtual port COM3. When I try to change the port to *any* other COM port, I get an error that the port has been opened by another application.
View 4 Replies
ADVERTISEMENT
Dec 2, 2011
i am using n73 mobile to connect to the internet...ut now a days it couldnt get connect....it says modem not found....
View 2 Replies
View Related
Jan 6, 2013
I have a laptop and regular computer and a new modem sent by comcast also a wireless modem. I can only get one to work. what am i doing wrong?
View 3 Replies
View Related
Jan 20, 2012
I have a laptop and netbook on the same home network. A message on the laptop tells me:Windows has detected an IP address conflict. Another computer on this network has the same IP address as this computer.
View 2 Replies
View Related
Dec 15, 2012
I am having 2 issues with my computer and because of that I am losing internet connection intermittently.
1) Problem 1 - I lose internet connections very frequently. My PC drops connection and connects back with in 1 min. When I checked system event I see the log as below. -- Name resolution for the name dns.msftncsi.com timed out after none of the configured DNS servers responded. here dns.msftncsi.com is just one server, but I do see logs for other server as well.
2)Problem 2 - Time to time I get IP conflict issues. I don't have fixed IP address. The system detected an address conflict for IP address 192.168.0.4 with the system having network hardware address 90-21-55-E8-29-C8. Network operations on this system may be disrupted as a result.
Initially I thought both problems was todo with my ISP provider, but I begin to think it could be issue with my computer as my ISP provider tried everything from their side such as changing modem, router..etc.
My computer is windows 7, intel core i7 Q720@1.60GHZ, 8GB Ram.
View 10 Replies
View Related
Nov 21, 2009
I have just assembled a Tiger Direct barebones kit with Win 7 64 bit home premium.
ASUS motherboard with onboard ATI graphics, and a Radeon HD 4350 graphics card to boost graphics performance. The machine tends to shut down with a BSOD which provides this error message.
I can't access the two help files--not sure what to use to open the .dmp file--I don't see a Windows 7 version of software to open than, and while I am the administrator for the machine under my own login, I'm told I don't have admin rights and need permission to open the file. I reviewed the permissions and don't see any more I can have, so I'm perplexed.
At the same time, my tech friends suggest my problem is likely to be a driver conflict between the onboard and the video card and I should work on resolving this. When I check DM the Radeon video card shows no conflicts and says it's working correctly.
In the meantime, my digital monitor works on the analog video outputs both from the motherboard and the graphics card, but neither DVI output works. I've got the latest available drivers for the Radeon card and the Windows 7 check for Samsung drivers says the PnP driver is the latest available. Samsung shows no new drivers for Windows 7.
View 0 Replies
View Related
Apr 7, 2011
I noticed a couple weeks ago that my mouse/pointer was moving erattically in photoshop. Upon a left mouse click, whatever tool I was using would jump where it should not be (eg the move tool would displace a layer after a left click, or the brush tool would add a swipe of color where it shouldn't be, or the marquee tool, refusing to de-select because it would add a new selection at a new mouse click)--and this has been causing massive frustrations to say the least.I'm on a Windows 7 64-bit install, Quad core, 2.8Ghz, 8Gig RAM system.After chasing the problem for a few days, it appears to be caused by a PCI network interface card. If I remove the card, the behavior goes away... But if I only disable the card in devices, the problem persists. I've tried updating the drivers, but this doesn't help. The problem card is a Rosewell, which uses a RTL8100C chipset. I tried a Belkin PCI NIC to see if that would help (chipset 8139a), but it causes the same erattic behavior.So, I'm looking at a system problem (not a photoshop problem), maybe a hardware conflict. Photoshop is the only program in which I've noticed the behavior.My first step has been ordering an Intel PCI-express card, which uses an Intel 82574L chipset (rather than Realtek).
View 2 Replies
View Related
Aug 9, 2012
I am using a verizon uml290 usb modem on a Lenovo desktop computer and every time I connect to the internet I get the message of IP address conflict. I am able to connect and use the internet fine but I keep getting the message. When I check the event log there ate approximately 1800 entries and this computer is only a month old.
View 4 Replies
View Related
Dec 6, 2009
I'm having a problem with using USB network adapters, I've tried three different ones and they all end up shutting off my computer every few hours. It is some form of USB conflict I can't seem to fix.
I tried switching to a PCI card, but since I happen to be in a corner in the house having the wireless adapter on top of the desk is the only thing that seems to get me any sort of signal. But the USB Adapters all persist in shutting me down. Just a hard-shutoff with no warning, all of a sudden bam, its just powered off.
Right now I'm using a Belkin N+ USB Adapter. Any ideas on how to correct this issue? I have several other USB devices plugged in as well: KVM switch, external hard drive, webcam, mouse+keyboard.
View 2 Replies
View Related
Aug 8, 2011
I need advice to repair conflict with Windows 7 update which causes my HP notebook to not recognize scanner function of my printer. It says WAI driver missing, but I never deleted any drivers. I no longer have disk with drivers. I have repaired this before with doing a system restore to before update, but is extreme solution to have to keep repeting and causes other problems.
View 3 Replies
View Related
May 26, 2012
I've been using an Asus ROG G51J gaming laptop for a while now, and a couple months back, I noticed this weird problem. Occasionally, when my headphones were plugged in, I'd hear this popping noise. Sometimes it was just one pop in minutes, sometimes it sounded like machinegun fire. After a bit of investigation, I realized that for the duration of each pop (a fraction of a second, at most) my computer would play sound through its onboard speakers instead of the headphones. It didn't seem to change based on what programs I had running or what devices I had connected to the computer, and restarting the machine entirely only temporarily defeated the problem.
View 6 Replies
View Related
Aug 19, 2011
I have a graphics card usr5699b that was working for a short time on win 7 but after 2 days it caused my video cards to mess up possible driver issue or irq conflict. Is there anyway to make the drivers compatible with win 7?
View 4 Replies
View Related
Apr 30, 2012
I do use a online USB foot pedal that is used for transcription. I have two plugs powering the system, one for the monitor and the other to the CPU, connected to a extension cord with 5 sockets. To the rest of the sockets I had my DTH (digital tv receiver) and a small tv connected. With this setup, when I am working with my footpedal, it works for 1/2 an hour with proper play, rewind, and forward controls. After 1/2 an hour, it starts acting weird and begins to control itself in that it plays stops rewinds continuously by itself making it difficult for me. At first I thought it is driver issue and reinstalled and installed and tried all methods. I do get lot of errors at such times if I change the USB port for the pedal during the times of this issue. However, the moment I switch the DTH off from the power source. It all seemed to be working fine again without any issue.
Considering that, I thought it may be due to some voltage problem with distribution of power and I connected the DTH set seperately out to an entirely different AC wall socket but same room. Again, for the first half an hour the pedal controls works fine, and then the same thing happens and the moment I switch the DTH receiver off, its all back to normal.
View 3 Replies
View Related
Jul 29, 2011
What does that mean? I have a PC, which is connected to the Router via a cable, besides that, two more notebooks use the Wireless network provided from that very router.
View 9 Replies
View Related
Feb 8, 2012
My laptop won't work with the Ethernet cable and say it has an IP conflict. All my computers have an IP address starting with 192 and the laptop has an IP address starting with 169. I did an ipconfig and on ipv4 is where I got the IP addresses. I tried to do an ipconfig / release but it won't release the IP address because of the wireless media.
View 2 Replies
View Related
Dec 1, 2011
It may be because there are 3 DVI ports on the one card but Win 7 does not recognise all 3 monitors, only 2.
On the contrary the Nvidia control panel recognises all 3 monitors and I am able to configure all 3 screens with a res of 5760 / 1080. All is fine until I reboot and then nothing. All monitors blank. I can only assume that it's because of a conflict with the Nvidia driver (latest) and windows.
My question is, is it possible to force windows to recognise all 3 monitors?
ASUS SKT-1366 P6T Deluxe V2
Windows 7 64 bit
i7 975 Extreme OC to 4.2GHZ
6gb of 1866mhz Dominator DDR3
1TB Samsung F1 SATA II
Nvidia GeForce 590 GTX
Acer 3D 27 inch X 3
3D Vision Surround.
View 2 Replies
View Related
Feb 3, 2012
I am using a Dial up connection but when I have to connect dial up connection then I have to change my local area connection ip. Is there any tip or method which is able to my local area connection ip through batch programming/Command prompt ?I need random ips every time before connect from dial up connection. Would it be possible from batch programming.
Windows 7 64 bit
4GB RAM
4MB DSL connection
View 9 Replies
View Related
Dec 26, 2012
i have conflict in sessions when remote win 2000 server by win7 PC's - all PC's using the same user name and PW
View 4 Replies
View Related
Feb 2, 2013
Facebook used to open just fine last week. Now this week no one in my house can open it. We all get the error message stating that Internet Explorer cannot open the webpage. The funny thing is that Facebook is the only site that is unaccessable. All others work just fine. We are running a Belkin wireless router.we can open Facebook when we connect to the internet using my husbands mobil hotspot on his cell phone.
View 2 Replies
View Related
Apr 15, 2012
I'm a coder and I'm codding with dev c++ and I tried to open a dll file with dev c++ and all dll files opened up with dev c++
View 1 Replies
View Related
Aug 5, 2011
My computer is getting this when I boot Windows 7: "STOP: c000021a {Fatal System error}" I also multiboot Ubuntu 10.10, What do I do? I need to uninstall Ubuntu 10.10, that's for sure, but how? And after that, how do I fix that error?
View 3 Replies
View Related
Jan 20, 2012
I am getting this error while trying to install an app in W7 OS machine. it stopped the installation process
View 1 Replies
View Related
Jul 24, 2011
Recently after I finished editing a .txt file in WordPad, I closed out of the program, but then immediately opened it back up because I forgot to change something. The program loaded, and I could see it and it's preview on the taskbar, but it would not show up on my screen. I hadn't installed or modified anything very recently also. Then later that day, after opening up Google Chrome, it did the same thing. I would not show the window on my screen. When I minimized and maximized the window from the taskbar, the animation showed the window going to the far right hand side and off the monitor. When I pressed "Windows Key +Tab" it showed the window, but wouldn't bring it to the front again. I'm not sure what is going on with my computer.
[code]...
View 9 Replies
View Related
Dec 8, 2011
System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Pentium(R) CPU P6200 @ 2.13GHz, Intel64 Family 6 Model 37 Stepping 5
Processor Count: 2
RAM: 1844 Mb
Graphics Card: Intel(R) HD Graphics, 730 Mb
Hard Drives: C: Total - 260242 MB, Free - 208221 MB; D: Total - 29690 MB, Free - 28507 MB;
Motherboard: LENOVO, MoutCook
Antivirus: avast! Antivirus, Updated and Enabled
I'm told that the file is open somewhere else but I don't understand where. How do I delete it?
View 6 Replies
View Related
Jan 20, 2012
I am having is that websites keep crashing, it has only started to happen over the last few days. I have not installed or removed anything. I have scanned for viruses but there are none. I have restarted the computer but that makes no difference either. I am using windows explorer. Does anyone have any idea what could be causing this?
View 5 Replies
View Related
Jul 4, 2012
OS win 7. This is an issue that I have (Like lots of other people too, I suspect) been having over the last couple of days. My home page is Google and when I boot up the message >Your profile could not be opened correctly. Some features may not be available. Please check that the profile exists and you have permission to read and write its contents< without the arrow heads.I have tried keying the message into Google, but there doesn't seem to be a cure up to now. Does anyone have the same problem? If so, have you been able to find an answer. My pc is clean.
View 1 Replies
View Related
Jul 19, 2011
Have WLM on my old XP and strange thing is all the messages I get from this forum have a little yellow envelope that does not open like the other messages do.Any ideas - it's not a problem only I still have mail as being unread in the inbox.Plus some messages have obviously a picture in them but the square as a small red "x" in a small white box am wondering what that is about too.
View 3 Replies
View Related
Jan 24, 2011
My laptop screen stays off when I close the lid. I set the laptop to 'do nothing'(turn off the screen), when I close the lid. When I open it, the screen stays off.The only way to fix it from here is to either turn it off or to put it in sleep mode (with my designated button). Everything still works, its just that the screen doesn't turn on.
View 2 Replies
View Related
Jul 21, 2012
all my .exe files are getting opened with utorrent. tried to fix it with .reg file but that didn't help at all. now i cant download, cant install anything .unable to run any .exe programs.
View 7 Replies
View Related
Dec 29, 2012
I have a large amount of photos saved in one folder and want them to be sorted by the date they were placed there, for some reason the "sort by date" feature doesnt do this, the "sort by date last saved" does work, however the problem i have is that when the folder is opened winodws spends 10 seconds or so sorting the photos by the sort criteria i was wondering if there is any way to get windows to save the position of each photo so it doesn't spend that time sorting each time i open it! The "sort by date created" manages to show the photos as soon as the folder is opened without needing to spend the time sorting, the problem is this sort criteria doesn't quite have the photos in order. a few are randomly placed here and there.
View 1 Replies
View Related
Oct 29, 2009
I just upgraded (via Customer Install) my Vista laptop to 64-bit Windows 7 HP.
Under Vista, I was able to set Power Options so that the computer would go to sleep/hibernate when I close the lid. That works in Windows 7.
However, I was also able to set the Power Options so that the laptop would wake up and restore Windows when I opened the lid. So far, I have been unable to set that behavior in Windows 7.
View 9 Replies
View Related
