NIC Conflict Is Affecting Photoshop?
Apr 7, 2011
I noticed a couple weeks ago that my mouse/pointer was moving erattically in photoshop. Upon a left mouse click, whatever tool I was using would jump where it should not be (eg the move tool would displace a layer after a left click, or the brush tool would add a swipe of color where it shouldn't be, or the marquee tool, refusing to de-select because it would add a new selection at a new mouse click)--and this has been causing massive frustrations to say the least.I'm on a Windows 7 64-bit install, Quad core, 2.8Ghz, 8Gig RAM system.After chasing the problem for a few days, it appears to be caused by a PCI network interface card. If I remove the card, the behavior goes away... But if I only disable the card in devices, the problem persists. I've tried updating the drivers, but this doesn't help. The problem card is a Rosewell, which uses a RTL8100C chipset. I tried a Belkin PCI NIC to see if that would help (chipset 8139a), but it causes the same erattic behavior.So, I'm looking at a system problem (not a photoshop problem), maybe a hardware conflict. Photoshop is the only program in which I've noticed the behavior.My first step has been ordering an Intel PCI-express card, which uses an Intel 82574L chipset (rather than Realtek).
View 2 Replies
ADVERTISEMENT
Oct 25, 2010
I've recently purchased a new notebook, and the items on the screen were incredibly small. I used the 'make text or other items larger or smaller' option in control panel and set it to 150%. The problem is when I run Camtasia studio and go to record the screen the recording section of the screen is only the top left quarter of the screen. Even if I set Camtasia to 'record thw whole screen' it still only records the top left box. I know the problem isn't Camtasia because on another program which allows you to take and edit screenshots, when I take screenshots it only screenshots the top left quarter of my screen.I tried installing the programs after I had changed the DPI and the problem persists. Is the any way to 'zoom in' so to speak without messing with the DPI and screen ratio's for programs?
View 2 Replies
View Related
Jun 5, 2012
I need a way to lock my computer without affecting any programs. I have programs running that access the mouse and keyboard functions. When I lock my computer, it disables the desktop access to these and breaks the programs. Is there any way to get around this in windows or maybe a program that will allow me to lock my computer without leaving the desktop?
View 5 Replies
View Related
Mar 14, 2012
My computer has started getting BSODs since a few weeks ago and like running Memtest, an extended version of Windows Diagnostic scan (both of which came up with no error results), and updated my drivers but to no avail.
Attached is a rar file containing files from SF diagnostic tool, screenshots of the cpuz tabs and an html report from Rammon. Seven Forums.rar
View 1 Replies
View Related
May 17, 2011
WMC recording/playback and media/file sharing seems to work fine until I go to copy a file between drives, where one of those drives is currently using some of its i/o bandwidth to do media. The copy hogs the i/o bandwidth, doing nasty things to the real-time needs. How do I permanently tell Windows 7 x64 to do all [explorer] copies at a lower CPU and i/o (explorer.exe & system) priority and/or elevate WMC CPU & i/o (ehshell.exe?) and file/media sharing priorities a bit? The PC is up to date on patches/drivers and should be able to prioritize obvious applications.
View 2 Replies
View Related
Mar 10, 2012
I'm trying to delete the windows.old folder, but found out that I have Securom and it's preventing me from doing so. There are two files that are apparently encrypted with strange names and I've found some advice on how to completely remove Securom from my computer. However, I just want to make sure that I don't remove it completely as I'm currently playing Company of Heroes: Game of the Year edition (Amazon download) and the Mass Effect 2 demo. how to remove the files in windows.old only? Does this involve deleting specific registry keys, too?
View 1 Replies
View Related
May 29, 2012
I have two harddrives, the primary one 584 GB, the secondary one 1.36 TB. When booting, my computer takes about a minute or two to fully load, but if I start to actually use it, virtually all programs will move slowly, consume lots of memory, explorer windows will take forever to load, and even cause my video card to stutter a bit.
A while ago, I unplugged the secondary drive, and found that my computer booted up much faster, and was infinitely more stable soon after loading.
But with two harddrives, in order to maintain stability, I often wait up to 5 - 10 minutes after booting to the desktop, just to be safe.
Is this a normal symptom of having two huge harddrives, both of which are filled with about 500 GB each, and programs like Norton security suite and messenger programs all needing to boot up? Or is this a problem with the second harddrive?
View 9 Replies
View Related
Jan 20, 2012
I have a laptop and netbook on the same home network. A message on the laptop tells me:Windows has detected an IP address conflict. Another computer on this network has the same IP address as this computer.
View 2 Replies
View Related
Dec 15, 2012
I am having 2 issues with my computer and because of that I am losing internet connection intermittently.
1) Problem 1 - I lose internet connections very frequently. My PC drops connection and connects back with in 1 min. When I checked system event I see the log as below. -- Name resolution for the name dns.msftncsi.com timed out after none of the configured DNS servers responded. here dns.msftncsi.com is just one server, but I do see logs for other server as well.
2)Problem 2 - Time to time I get IP conflict issues. I don't have fixed IP address. The system detected an address conflict for IP address 192.168.0.4 with the system having network hardware address 90-21-55-E8-29-C8. Network operations on this system may be disrupted as a result.
Initially I thought both problems was todo with my ISP provider, but I begin to think it could be issue with my computer as my ISP provider tried everything from their side such as changing modem, router..etc.
My computer is windows 7, intel core i7 Q720@1.60GHZ, 8GB Ram.
View 10 Replies
View Related
Nov 21, 2009
I have just assembled a Tiger Direct barebones kit with Win 7 64 bit home premium.
ASUS motherboard with onboard ATI graphics, and a Radeon HD 4350 graphics card to boost graphics performance. The machine tends to shut down with a BSOD which provides this error message.
I can't access the two help files--not sure what to use to open the .dmp file--I don't see a Windows 7 version of software to open than, and while I am the administrator for the machine under my own login, I'm told I don't have admin rights and need permission to open the file. I reviewed the permissions and don't see any more I can have, so I'm perplexed.
At the same time, my tech friends suggest my problem is likely to be a driver conflict between the onboard and the video card and I should work on resolving this. When I check DM the Radeon video card shows no conflicts and says it's working correctly.
In the meantime, my digital monitor works on the analog video outputs both from the motherboard and the graphics card, but neither DVI output works. I've got the latest available drivers for the Radeon card and the Windows 7 check for Samsung drivers says the PnP driver is the latest available. Samsung shows no new drivers for Windows 7.
View 0 Replies
View Related
Aug 9, 2012
I am using a verizon uml290 usb modem on a Lenovo desktop computer and every time I connect to the internet I get the message of IP address conflict. I am able to connect and use the internet fine but I keep getting the message. When I check the event log there ate approximately 1800 entries and this computer is only a month old.
View 4 Replies
View Related
Oct 16, 2012
I want to use Windows Fax and Scan on an HP desktop computer running Win 7 Home Premium. I bought an inexpensive internal PCI fax modem and installed it, which seemed to go without problem. Device Manager reports it is working properly, but when I use the Diagnostics to query the modem I get an error that the port the modem is attached to could not be opened because of a possible hardware conflict.. The modem log reports the following:
10-16-2012 12:20:39.662 - Modem type: PCI SoftV92 Modem
10-16-2012 12:20:39.662 - Modem inf path: oem28.inf
10-16-2012 12:20:39.662 - Modem inf section: Modem3
10-16-2012 12:20:39.662 - Matching hardware ID: pciven_14f1&dev_2f30&subsys_205114f1
10-16-2012 12:20:39.724 - Opening the modem device failed with error 000005aa
The computer has no built-in COM ports (strictly USB), and the modem, like almost all internal modems, installs iteself on virtual port COM3. When I try to change the port to *any* other COM port, I get an error that the port has been opened by another application.
View 4 Replies
View Related
Dec 6, 2009
I'm having a problem with using USB network adapters, I've tried three different ones and they all end up shutting off my computer every few hours. It is some form of USB conflict I can't seem to fix.
I tried switching to a PCI card, but since I happen to be in a corner in the house having the wireless adapter on top of the desk is the only thing that seems to get me any sort of signal. But the USB Adapters all persist in shutting me down. Just a hard-shutoff with no warning, all of a sudden bam, its just powered off.
Right now I'm using a Belkin N+ USB Adapter. Any ideas on how to correct this issue? I have several other USB devices plugged in as well: KVM switch, external hard drive, webcam, mouse+keyboard.
View 2 Replies
View Related
Aug 8, 2011
I need advice to repair conflict with Windows 7 update which causes my HP notebook to not recognize scanner function of my printer. It says WAI driver missing, but I never deleted any drivers. I no longer have disk with drivers. I have repaired this before with doing a system restore to before update, but is extreme solution to have to keep repeting and causes other problems.
View 3 Replies
View Related
May 26, 2012
I've been using an Asus ROG G51J gaming laptop for a while now, and a couple months back, I noticed this weird problem. Occasionally, when my headphones were plugged in, I'd hear this popping noise. Sometimes it was just one pop in minutes, sometimes it sounded like machinegun fire. After a bit of investigation, I realized that for the duration of each pop (a fraction of a second, at most) my computer would play sound through its onboard speakers instead of the headphones. It didn't seem to change based on what programs I had running or what devices I had connected to the computer, and restarting the machine entirely only temporarily defeated the problem.
View 6 Replies
View Related
Aug 19, 2011
I have a graphics card usr5699b that was working for a short time on win 7 but after 2 days it caused my video cards to mess up possible driver issue or irq conflict. Is there anyway to make the drivers compatible with win 7?
View 4 Replies
View Related
Apr 30, 2012
I do use a online USB foot pedal that is used for transcription. I have two plugs powering the system, one for the monitor and the other to the CPU, connected to a extension cord with 5 sockets. To the rest of the sockets I had my DTH (digital tv receiver) and a small tv connected. With this setup, when I am working with my footpedal, it works for 1/2 an hour with proper play, rewind, and forward controls. After 1/2 an hour, it starts acting weird and begins to control itself in that it plays stops rewinds continuously by itself making it difficult for me. At first I thought it is driver issue and reinstalled and installed and tried all methods. I do get lot of errors at such times if I change the USB port for the pedal during the times of this issue. However, the moment I switch the DTH off from the power source. It all seemed to be working fine again without any issue.
Considering that, I thought it may be due to some voltage problem with distribution of power and I connected the DTH set seperately out to an entirely different AC wall socket but same room. Again, for the first half an hour the pedal controls works fine, and then the same thing happens and the moment I switch the DTH receiver off, its all back to normal.
View 3 Replies
View Related
Jul 29, 2011
What does that mean? I have a PC, which is connected to the Router via a cable, besides that, two more notebooks use the Wireless network provided from that very router.
View 9 Replies
View Related
Feb 8, 2012
My laptop won't work with the Ethernet cable and say it has an IP conflict. All my computers have an IP address starting with 192 and the laptop has an IP address starting with 169. I did an ipconfig and on ipv4 is where I got the IP addresses. I tried to do an ipconfig / release but it won't release the IP address because of the wireless media.
View 2 Replies
View Related
Dec 1, 2011
It may be because there are 3 DVI ports on the one card but Win 7 does not recognise all 3 monitors, only 2.
On the contrary the Nvidia control panel recognises all 3 monitors and I am able to configure all 3 screens with a res of 5760 / 1080. All is fine until I reboot and then nothing. All monitors blank. I can only assume that it's because of a conflict with the Nvidia driver (latest) and windows.
My question is, is it possible to force windows to recognise all 3 monitors?
ASUS SKT-1366 P6T Deluxe V2
Windows 7 64 bit
i7 975 Extreme OC to 4.2GHZ
6gb of 1866mhz Dominator DDR3
1TB Samsung F1 SATA II
Nvidia GeForce 590 GTX
Acer 3D 27 inch X 3
3D Vision Surround.
View 2 Replies
View Related
Feb 3, 2012
I am using a Dial up connection but when I have to connect dial up connection then I have to change my local area connection ip. Is there any tip or method which is able to my local area connection ip through batch programming/Command prompt ?I need random ips every time before connect from dial up connection. Would it be possible from batch programming.
Windows 7 64 bit
4GB RAM
4MB DSL connection
View 9 Replies
View Related
Oct 12, 2012
I Need to Know Everyone Use x86 or x64 for Photoshop. I Don't Know What Different Between Both Versions But I Feel It Same
View 7 Replies
View Related
Mar 6, 2012
i'm trying to install Photoshop CS4 extended version on my newly installed Windows 7 x64 OS, but the CD doesn't run, it just does nothing, the ODD does however play DVDs? Might this be because its a 64 bit OS ? Previously had Vista installed on the laptop, and it doesn't state anywhere on the PS box whether its a x86 or x64 software version.
View 5 Replies
View Related
Jul 9, 2010
I've been trying to install Adobe Photoshop CS5 Extended on Windows 7 Ultimate x64.The problem is installation fails , because the installer does not have permissions to install files into the windows folder. It cannot install the Microsoft VC80_ATL and VC90_ATL . I've runned as Administrator , Tried to manually install the VC.msi installers , I've turned off AV,AS,Defender,Firewall and so on, I've tried installing through Command Prompt running as administrator and writing msiexec /a "file destination". Still no luck, Tried installing from desktop , tried safe mode , nothing works
View 9 Replies
View Related
Dec 12, 2009
I have to buy a new computer and have heard alot of conflicting info. If anyone knows this answer I'll appreciate a response greatly. I have photoshop 7 now and will be buying a new computer. Will I be able to run this on windows 7? The upgrade for photoshop is almost the price of a computer so I have to know for sure.
View 4 Replies
View Related
Feb 15, 2011
just bought a new computer with windows7 home premium os, and it wont let me load my old adobe photoshop v5, is there anyway I can get it to be loaded?
View 8 Replies
View Related
Jan 9, 2013
I want to know if Adobe Photoshop Elements 10 will help me manage, orangize, and sort digital photographs already stored on the hard drive? Another words, I have thousands of duplicate photosgraphs in files and folders that i want to be able to pare down to one copy.
View 4 Replies
View Related
Dec 6, 2012
I downloaded a few new fonts from Defont and they are not showing up in my font selection in Photoshop. They did, however, appear in my font folder on my C drive. How do I use them in Photoshop?
View 2 Replies
View Related
Mar 11, 2010
I love Adobe Photoshop 4.0 and do not want to upgrade nor learn a new version. I need a new computer but am hestiate in getting Windows 7 Home Version if I can't install Adobe Photoshop 4.0 (release date 96-98). Has anyone had a successful install of this program?
View 9 Replies
View Related
Jan 6, 2012
My doc's default to a Photoshop file, how do I stop this and have them open automatically in a word doc?
View 6 Replies
View Related
Feb 10, 2010
I have 4G ram but photoshop cs4 sees less than 2G with WIN7. What needs to be done to access the other 2 Gs?
View 2 Replies
View Related
