I want to know if Adobe Photoshop Elements 10 will help me manage, orangize, and sort digital photographs already stored on the hard drive? Another words, I have thousands of duplicate photosgraphs in files and folders that i want to be able to pare down to one copy.
I am very computer literate (Ex Wang System Engineer) but this has me stumped. I often get BSOD when running the above programs. No other programs give me problems. I installed trial version of Elements 10 to see if that might work, it crashed once. Since then today I have not been able to get either to crash. System is I7 930 chip on a Gigabyte m/b (GA-X58A-UD3R), 4Gb ram (2 banks). In the past I have swapped banks, but no change.
OS is Windows 7 Home Premium 64 bit. Original OEM.
I have been getting this error for a while on anything from Adobe or Apple that I try and install or uninstall. I tried to reinstall Adobe Premiere Elements 8 and I got this error when it was trying to uninstall it prior to reinstalling it. I tried to install Adobe Premiere Elements 9 trial and I get the same error just before it completes installation. I have the UAC turned off, and I've tried doing this as Administrator.
I get this error if I try and uninstall an earlier version of Adobe Acrobat Reader (I have the new one installed as well). And I get this error if I try and update Apple ITunes, or QuickTime. I get notices all the time to update but it never works. I do have working versions of all this software on my computer but can't seem to update any of them. I would like to update to the new version of Premiere Elements.
When trying to install Premiere Elements 9 the complete error message reads as: "Error 1326 Error Getting File Security C:programdataPhotoshop ElementscatalogsGetLastError5".
Not sure if this is the right place to post but i really cant figure this out.Im trying to install the above program on 7260 x86 and i keep getting error 1303 and it tells me i dont have the correct permissions (or rather the installer doesnt) on the install folder.Ive used the Take ownership hack as well as setting permissions to allow Everyone full access.Any one got any ideas? Im sure im just missing something but its been bugging me for two days now
Adobe Photoshop CS3 Extended crashes every time I quit out of it, and I don't know why. It's pretty annoying especially when it was fine closing a few days back.
Alright, so I recently got Photoshop CS4 using Windows Vista, but I just want to try the Windows & Ultimate so i format may laptop change my OS to Windows 7. Not sure why, but I got the screen to accept or decline the user end license agreement, when I clicked to accept it, it just went away and nothing happened. So I uninstalled it, and tried reinstalling it, now every time I try, it gets right to the end, where it's installing Adobe Bridge CS4 and it comes up with an error saying it had problems installing photoshop CS4 and then asks me if I want to continue with the installation, I click continue, and it finishes, but I get an error message at the end again. When I click more information I get this:
Adobe Photoshop CS4 Error: Error 1603. Fatal error during installation. Adobe Photoshop CS4 Error: Error 1603. Fatal error during installation. Adobe Bridge CS4 Error: Error 1603. Fatal error during installation. Adobe Device Central CS4 Error: Error 1603. Fatal error during installation.
Until recently my computer would open image files with Adobe Photoshop and Preview them using Windows Photo Viewer. This is the way it has worked in Windows 7 as long as I have been using it. This worked great because Photo Viewer open almost instantly and Photoshop takes forever! About a week ago, probably after some Windows updates, it started "Opening" everything in Photo Viewer instead of Photoshop.
I changed the default program back to Photoshop, I had to do this with every image format, from BMP to TIf one at a time, but I got it so when I want to open an image, to edit, it comes up in Photoshop. The problem is that it now does the same thing with anything I want to preview! I work with images all day long. So my question is how do I get it to respond to the "Preview" command with Picture Viewer without changing the default action for "Open"? I've looked and I can't find any place that lets you change this setting.
Recently my computer has been force closing applications like Photoshop and Windows Explorer. It usually happens when I right click in Explorer or try to open anything in Photoshop. When it happens, a dialogue box comes up that says "Windows Explorer has stopped working" or "Adobe Photoshop has stopped working" Under the details it displays this information:
Problem signature: Problem Event Name:APPCRASH Application Name:Explorer.EXE Application Version:6.1.7600.16768 Application Timestamp:4d688122
I downloaded Adobe Photoshop (Portable) and installed it. Then I wanted to change the location where it was saved. I tried to move it but it couldn�t be moved so I copied and pasted it into a new location. I know I should uninstall but since I just wanted 1 copy, I deleted one. After that, most of the other Adobe programs were affected. When I opened some, they would say that some files are missing or my license has expired. Some started asking for serial number or to register.When I opened Adobe Photoshop Elements 7.0 it said Photoshop Elements Help was missing and there were missing icons on the right side. I uninstalled and reinstalled the programs. I downloaded some but they can�t be installed. It always says some files are missing.
I just received my new WD Elements 3TB External drive and at find it worked fine and I was copy files to it and it seem to of froze and the files stopped copying (using TeraCopy) so I pressed cancel to stop the transfer and it wouldn't stop so I just unplugged the drive and now it doesn't show up in windows anymore. I went into Disk Management and it shows up but i cannot do anything to it. The Initilize disk pops up and I click GBP and it fails and says Media is write protected.
I have a Seagate 1.5 TB Free Agent External Hard Drive . I have a folder with approx500 GB in this H.D. This folder have some other 3 -400 folders . Sudenly , when I open the H.D. I cannot see this folder ; when I check the H.D.'s properties the folders / files are in the H.D.
As of recently (for the last couple of weeks) I noticed that the transfer rate to my external WD Elements SE 1TB drive is very very slow (~2MB/sec). This wasn't always the case, and the drive was much more responsive than that.
I searched about this topic extensively and the only thing I found was an issue with installing Windows 7 SP1 that in some cases screwed up the USB2 drivers. This was supposedly addressed by KB2529073 which is installed on my system. However, I'm still experiencing this ulta slow transfer rate.
I have Win 7 home premium on an HP laptop with 4 usb ports. I have 2 Western Digital Elements 1.5 TB drives for backups. If I plug in one of the drives, Win assigns a drive letter, but if I add the second one it doesn't.
To troubleshoot, I've plugged each drive into every usb port on the laptop, and each port reads each drive alone, but if I plug in the second drive while the first is still in, it shoes up in devices but does not get a drive letter. I tried assigning a different drive letter to the device plugged in first, but Win still doesn't assign a letter to the second drive.
i'm trying to install Photoshop CS4 extended version on my newly installed Windows 7 x64 OS, but the CD doesn't run, it just does nothing, the ODD does however play DVDs? Might this be because its a 64 bit OS ? Previously had Vista installed on the laptop, and it doesn't state anywhere on the PS box whether its a x86 or x64 software version.
I've been trying to install Adobe Photoshop CS5 Extended on Windows 7 Ultimate x64.The problem is installation fails , because the installer does not have permissions to install files into the windows folder. It cannot install the Microsoft VC80_ATL and VC90_ATL . I've runned as Administrator , Tried to manually install the VC.msi installers , I've turned off AV,AS,Defender,Firewall and so on, I've tried installing through Command Prompt running as administrator and writing msiexec /a "file destination". Still no luck, Tried installing from desktop , tried safe mode , nothing works
I have to buy a new computer and have heard alot of conflicting info. If anyone knows this answer I'll appreciate a response greatly. I have photoshop 7 now and will be buying a new computer. Will I be able to run this on windows 7? The upgrade for photoshop is almost the price of a computer so I have to know for sure.
just bought a new computer with windows7 home premium os, and it wont let me load my old adobe photoshop v5, is there anyway I can get it to be loaded?
I downloaded a few new fonts from Defont and they are not showing up in my font selection in Photoshop. They did, however, appear in my font folder on my C drive. How do I use them in Photoshop?
I love Adobe Photoshop 4.0 and do not want to upgrade nor learn a new version. I need a new computer but am hestiate in getting Windows 7 Home Version if I can't install Adobe Photoshop 4.0 (release date 96-98). Has anyone had a successful install of this program?
I noticed a couple weeks ago that my mouse/pointer was moving erattically in photoshop. Upon a left mouse click, whatever tool I was using would jump where it should not be (eg the move tool would displace a layer after a left click, or the brush tool would add a swipe of color where it shouldn't be, or the marquee tool, refusing to de-select because it would add a new selection at a new mouse click)--and this has been causing massive frustrations to say the least.I'm on a Windows 7 64-bit install, Quad core, 2.8Ghz, 8Gig RAM system.After chasing the problem for a few days, it appears to be caused by a PCI network interface card. If I remove the card, the behavior goes away... But if I only disable the card in devices, the problem persists. I've tried updating the drivers, but this doesn't help. The problem card is a Rosewell, which uses a RTL8100C chipset. I tried a Belkin PCI NIC to see if that would help (chipset 8139a), but it causes the same erattic behavior.So, I'm looking at a system problem (not a photoshop problem), maybe a hardware conflict. Photoshop is the only program in which I've noticed the behavior.My first step has been ordering an Intel PCI-express card, which uses an Intel 82574L chipset (rather than Realtek).
Newly built computer, I'll update my specs in the profile shortly (done).Probably crashed 5 or 6 times.Crashed while gaming, crashed while not gaming, crashed while I was at the store.Could possibly blame xSplit for the crashes, as I can't remember if it's crashed while it isn't running.Different errors eachtime:DRIVER_IRQL_NOT_LESS_OR_EQUAL,PAGE_FAULT_IN_NONPAGED_AREA (x2),UNEXPECTED_KERNEL_MODE_TRAP,KMODE_EXCEPTION_NOT_HANDLED, MEMORY_MANAGEMENT.I removed one stick of RAM recently to test if it was bad, even though memory test didn't show any issues. All the crashes so far have been with both sticks.Is Windows 7 . . . - x86 (32-bit) or x64 ? x64 - the original installed OS on the system? I installed it, newly built computer. - an OEM or full retail version? It's an OEM version from one of my Dell computers.
- OEM = came pre-installed on system - Full Retail = you purchased it from retailer - What is the age of system (hardware)? A few days, it's newly built. - What is the age of OS installation (have you re-installed the OS?) A few daydit: One dump didn't get included. It was at C:WindowsMEMORY.DMP. It's roughly 500MB in size. Here is the results of running a WinDBG on it:[CODE]
I bought a Spyder3 Express to calibrate dual monitors for Photoshop and they don't really state for Win 7 but does cover Vista 32/64. I notice a few add-ons for win 7 are really vista support was wondering if any others here have tried any devices for Cal dual monitors.
The other day my layer's option disappeared from the bottom right of my photoshop and I don't know how to get it back! I can manually edit my layer's by going to file etc., but that just takes too long, how do I get it back? [URL].
Does anyone know of a plugin that would allow me to make a reflection of an object on photoshop instead of manually doing it? Suppose if I have an item, I want it to look like its sitting on a glass table (hence thats where the reflection would come in), any suggestions?