I've been having this problem ever since I installed Windows 7. I was previously and XP user and had no probs with it until I installed Windows 7.
Basically when I turn my monitor off and turn it on again, my PC restarts itself. It doesn't matter how long I turn the monitor off for - As long as I hit the off button on my monitor while my PC is still running, the moment I turn on the monitor, the PC makes a beep and restarts.
My screen saver will not come on and the monitor is not turning off, even though I've set it using the advanced power settings. Also, when I put the computer into Hibernate mode, it always turns itself back on, usually in the middle of the night.
View 3 Replies View Relatedmy monitor won't turn on after it turns off automactially (I set this to 5 minutes in windows). I've disabled sleep mode and all that jazz. I suspect it might be an ssd problem because when it won't turn on there is minimal activity with the hard disc LED light.I've also disabled sleep, hybrid sleep and the page file thingie. I just want it to turn off my monitor, not put my computer to sleep[CODE]
View 9 Replies View RelatedI have a desktop PC running W7x64 for which I rely on my Alfa AWUS036H wireless USB adapter for an internet connection.
Windows 7 has a feature that seems to detect whether I turn off my monitor or not (for one reason, I know this because it makes a noise when I turn it on or off). When I turn my monitor off, my internet is disabled for some reason. I would like it to stay enabled so that I can download files and keep other active connections while the monitor is switched off.
I can verify that the indicator light on the USB adapter turns off when the monitor turns off and that the wireless utility that controls the device senses no device is present (i can see this using my secondary monitor, behavior only occurs when primary monitor is turned off).
Does anyone know how to disable this from happening? I have tried both turning off "Selective USB Suspend" and unchecking the "Allow computer to turn this device off" in the properties of the wireless adapter in device manager.
Windows 7 Ultimate (x64) keeps turning the monitor off after 15 Mins of in-activity.However - before it does that at 14 Mins and 30 Seconds it sorta does a quick flash - then at exactlly 15 mins does the turning off.All the power options are set to Never. (I have even created my own power plan for this)I have never had this problem on this PC before - this is a new install - and since then it has been doing this.
View 9 Replies View RelatedI am going to preface this by saying that this has *nothing* to do with restoring from sleep or hibernate modes. In searching for an answer to this issue, I found way too much related to that.
My problem is simple. Occasionally (~50% of the time) when I turn the monitor back on after shutting it off, it will stay blank and not really turn back on. It makes no difference how long the monitor has been off. After turning it back on, the power light is green, indicating there is a signal, but the screen is black.
Again, the computer has not slept or hibernated. I simply shut off the monitor and later come back to turn it on. The same thing will happen occasionally if Windows shuts the monitor off after the configured time. (I did that last part as a test; I typically do not automatically shut it off.)
Specs:
OS: Windows 7 64-bit
CPU: Intel Core i7 860
MB: Asus P7P55D
Memory: 8GB - Corsair CMX6GX3M2A1600C9 (2 x 2 x 2GB)
Graphics: NVIDIA GeForce 8800 GTS 640MB
Monitor: Chimei CMV 221D
NVIDIA Drivers: 8.17.11.9562 (11/20/2009)
I originally thought it was the OS that was hung. However, I was able to go into the start menu and restart ("Start" -> "Right" -> "Right" -> "R"), so I know the OS was there responding to my commands.
Attempts to fix:
- Restart the computer. This worked.
- Shut off the power to the monitor and turn it back on. This works most of the time.
- Lock and unlock Windows. This works after a few tries.
- Hit CTRL-ALT-DEL followed by ESC. This works after a few tries.
So, I have a fairly simple work around now. So this is only a minor annoyance. Hitting CTRL-ALT-DEL then ESC does seem to work. I don't think it is a placebo because I waited 5 minutes and it did not come back, but after 2 cycles of that, it came back. I think that fixes it because it causes full screen refreshes.
Does anyone have any ideas or has anyone seen this before? The drivers are recent, but I noticed this with the clean-install Windows 7 drivers for this card as well. This is a very clean and very recent install (3 days). I never had this problem with Vista 32-bit, the same graphics card, recent drivers, but different CPU/motherboard/memory.
This one is new in build 7201. Whenever I switch my monitor off, the entire system restarts. This happens every time.
I did have nVidia driver problems with the older builds, but I could always revert to the default driver. However this time, the default driver was already giving me issues, periodically going into BSOD. I decided to download the latest beta from nVidia hoping it would at least solve the random BSOD.
Well... it did. But it gives me a the issue I mention in the subject.
when my computer goes to sleep after it's on for a while when I move the mouse to get the screen back up it shows the backround no icons or anything to click. Same if I turn it off and turn it back on. I have to turn it off and on many times then go to safe mode and shut down then turn it on again for it to work. Just now I had to turn it on/off 4 times for it to show the icons and task bar. Usually it is left blank with nothing to click having no choice but to turn it off. Norton says no viruses. My computer is HP with windows 7. I bought it in 2011.
View 1 Replies View RelatedI have a three monitor set up. Whenever I open up a browser, either internet explorer or google chrome on monitors 2 and 3, after a few seconds it automatically drags my browser into my main monitor(monitor 1, where my start button and status bar is located)
View 3 Replies View RelatedI have a setup with 6 monitors. Today my main monitor broke and I couldn't find a way to shut the PC down since I couldn't access the main desktop to get to the Start menu.Is there a way to change which monitor is the main monitor without having access to the current main monitor?
View 5 Replies View RelatedI am running a dual monitor setup with my TV hooked up via HDMI to my laptop.
Everything was working fine before, I always had the laptop as my main display yet I could play a video or a game fullscreen on the TV.
Since a couple of days, as soon as I put something in fullscreen, it immediately goes on my laptop, regardless if it's open on my TV or my laptop. I don't remember changing/installing anything that could've changed that...
I checked a bit in the AMD vision software and the Windows control pannel but I can't seem to solve my problem without switching my TV as the main display. I also made a quick search on google as well as here but the problems were mainly with Flash, which isn't in cause here.
Here are my system specs:
Toshiba Satellite L75D
Windows 7 home premium 64-bit
AMD Radeon 6520G
I have just did a clean install of Windows 7 ultimate from XP and I am unable to get my dual monitors to work like they did in XP.
I have a DVI Radeon graphics card plugged into the agp slot, and a Nvidia geforce vga adapter plugged into a pci slot of my dell optiplex 755. When I am in the screen resolution settings the second monitor cannot be detected.
In bios I have 2 options under primary video adapter and they are auto, and onboard card. When set to auto the Nvidia card gets a signal but the Radeon does not. There are no conflicts in the device manager, and all of the drivers are up to date.
When I change the bios option to onboard card the Radeon adapter gets a signal but the other monitor cannot be detected and in device manager there is a yellow exclamation mark next to Standard VGA adapter and a code 10 error that states the device could not be started.
I have powered down, and unplugged every cable, I also tried to use the integrated VGA adapter to the Intel G31/G33/Q33/Q35 Graphics Controller but the computer will not even boot. I get
"System Halted
Attention Unsupported Video Configuration Detected"
I have two monitors, both work fine as standalone but Windows will not detect either as a secondary.
Please help me someone, I am so used to having my helpdesk email open in one monitor and all of my other work in the other monitor.
This computer is running an ATI Radeon HD 2400 Pro. It does support dual monitors...(I've had dual monitors active on this card before, but never on Windows 7.) But since installing windows 7, I can't even get it to detect the second monitor. I want to run the setup with the CRT as the primary monitor and the HD as the secondary.
View 7 Replies View RelatedI recently had an older HP Pavilion Media Center m7760n Desktop PC rebuilt. The old power supply fried the motherboard so I need to get a new power supply and motherboard. Here are my current specs.
Mainboard : Asus P5QPL-VM EPU
Chipset : Intel G41
Processor : Intel Core 2 Duo E6420 @ 2133 MHz
Physical Memory : 2048 MB (2 x 1024 DDR2-SDRAM )
Video Card : Intel(R) G41 Express Chipset (Microsoft Corporation - WDDM 1.1)
Hard Disk : WDC (1000 GB)
[code]....
As you can see from above, the "video card" is actually integrated into the motherboard.The computer works perfectly except for one major problem. I have 2 monitors, one is 22" with 1680 x 1050 resolution and the other is a 15" monitor with 1024 x 768 resolution. At the back of my computer I have a VGA port and a DVI port. The 15" is connected to the VGA port and the 22" is connected to the DVI port.When first starting the computer, the 15" monitor was recognized as the primary monitor while the 22" was recognized as the secondary monitor. No problem. I simply went to the display settings and set the 22" to be the primary monitor and the 15" to be the secondary monitor. Unfortunately, this setting seems to reset as soon as I reboot the computer. The 15" is always set as the primary monitor on start up, forcing me to set the proper settings all over again. What's worse is that even after I have set the proper settings, they sometimes revert back when using Media Center or other programs. Worse yet, sometimes the monitors both go completely black ... as if the monitor settings were about to switch but got locked up some how.I'm assuming that perhaps the on board video has a primary port (VGA) and a secondary port (DVI) but even still, shouldn't Windows 7 be able to over-ride this and save these settings so that the monitor settings remain the same during startup and regular usage?
How bad is turning off UAC?To install the scalix connector for windows 7 we have to turn off UAC i understand that this will also disable virtualization. Will this impact a users performance? And what if any are issues that we might run into by disabling UAC?Should we turn UAC back on?
View 1 Replies View RelatedThe upgrade from Vista to 7 was a smooth one with one exception; my internal bluetooth adaptor is not working.I have a Dell XPS M1330, and I tried enabling it via BIOS, but it does not want to turn on.The BT Tray icon is not showing up, which is the way I normally turn it on, and Fn F2 isn't bringing up any Bluetooth options. It's not in Control Panel under Network, either.There's got to be a way to turn it on.
View 9 Replies View RelatedObviously I use Windows 7 since i am posting in this category. I am in desperate need of some assistance. My computer lately has been lagging or momentarily freezing when I open a program or window. The most disturbing problem is that my laptop shuts off whenever it feels like it. I had to do a System Restore just to get it to turn on yesterday. Luckily I have come acrossI have a working knowledge of computers, enough to get me by so far, but this is way out f my league. In case the info is important I use AVG for anti-virus and also Windows Advanced Care (recommended by a friend). My computer is used mainly for gaming so I would love to get this fixed ASAP since shutting down mid boss fight is highly irritating.
View 5 Replies View RelatedI have an HP Pavilion DV7 laptop... The volume slider keeps turning itself all the way down, even as I try to turn it up. Its been happening for a while now. I've tried:
1.) Completely removed everything attached to the MOBO, only the LCD, DC Jack, RAM and HDD. Issue still persists
2.) Same as above only added battery, and unplugged the ac adapter and ran off battery. Issue is resolved.
3.)Plug power back in the issue happens again.
I tried many combinations of removing and adding hardware components and they all have the same result.
4.) I update the drivers, then uninstalled and download new drivers. Installed the software and disabled the software. The issue persists
5.) Tried updating windows and then disabling the sound software along with HP Smart software. Issue persists.
6.) installed a new HDD and clean installed windows 7 with only the provided drivers. Issue persists
7.) Replaced the Sound/Smart Media Power panel. Issue Persists
8.) Changed the RAM. Issue persists.
9.) Disabled the sound devices in the "Sound" control panel. Issue Persists.
10.) Flash the BIOS, already has the newest revision so I re-flashed it. Issue Persists.
11.) Tried switching AC Adapters. issue persists
12.) Changed DC Jack & AC Charger.
I have a home network with two desktop PCs and three laptops, all running Windows 7.I mostly use a desktop PC with Windows 7 Ultimate. I have installed the same version on my girlfriend's laptop. (All other computers use different versions of Windows 7. All 5 copies are legal.)However, when she turns her laptop back on, I get a BSOD on my desktop PC. This doesn't happen when any other PC is turned on.
View 5 Replies View RelatedFor some reason my computer's just not turning on. The motherboard light is on, showing the PSU is working. But when I turn on the PC it just doesn't boot or even start at all.
View 5 Replies View RelatedI'm very confused by this. Twice now at my uni house where my computer stays out on the desk it has turned itself on. This hasn't happened to me while I was at home over christmas where it lives in a bag .I told it to hibernate last night, turned off the plug and there were no lights on anywhere, but when I got up today it was on. I went to the event viewer but they only start at 13:45 (about when I got up).
View 4 Replies View Relatedi have been having problems lately with my PC.It has been turning off randomly.But only seems to happen when i am playing games requiring high performace.Say im playing Call of Duty Black Ops on my PC.After 1 hour or 2, my PC randomly turns off. url...And i have added a new Graphics card, the nVidia GTS450.When i am playing my core temps are usally 40-46 Celsius and GFX card 50-60 Celsius.I play on highest settings with 1600x900 and get 60 fps (limit)
View 6 Replies View RelatedI can turn on a pc from another machine on the same home network, but can not from the Internet.I am doing this Wake-On-WAN experiment at home by using two machines each connected to the Internet through different ISP.The problem must be somewhere in the BIOS or the router setting for the machine to be turned on.I reviewed the BIOS and found the relevant option was enabled by default. As for the router(D-Link DIR 655), I set the portforwarding for the machine with a arbitrary port number assigned. I did not see anything else relevant but I might have missed something.To send the magic packet, I am using depicus GUI. I also tried one at dslreports website.
View 3 Replies View RelatedI started having the issues of my desktop turning itself on in the middle of the night, and the infinite boot loop a few weeks ago. I have tried a few of the fixes online such as restoring, checking task scheduler, and running the startup fix on the Windows disc. The pc will also randomly shut down once it loads Windows (put itself through the proper 'Windows is shutting down', not the sudden shut down of a hardware failure). Tonight I also got the bizarre happening of a black screen shortly after startup, with a small in the task bar saying something like 'This Windows version is not genuine'. I am using 7 Home Premium 64bit.
View 1 Replies View RelatedWhen I press the power button on my computer, everything lights up briefly, then turns and then continuously trys to start about every five seconds.
View 14 Replies View RelatedI have a toshiba laptop that will not turn on but shows its charging,what can i check for fixing this problem?
View 2 Replies View Relatedmy loptop is of hp pavilion g series,i have purchesed it about 11 month ago, but its webcam is not turning on. what to do
View 1 Replies View RelatedI'm just trying to find out why my labtop keeps on turning of on me randomly. when it shuts down it resests itself and comes to the "you havnt shut down your computer corectly" screen. if i go on safe modes then i doesnt turn off, but i cant use all my stuff. i have recenly bout a cooler pad and some compressed air to blow it out but nothing seems to work
View 2 Replies View RelatedMy father has a Toshiba Satellite P755-S5215 laptop with Windows 7 and an Intel inside Core i3 processor. It has occasionally had the issue of turning itself off randomly during boot up, upon logging on, or shortly after logging on. However, it has become much more chronic ever since I hooked it up to use the television to use as a monitor. I plugged it in using a 15-pin monitor cable. The computer was off when I plugged it in and when I removed it. I don't know for sure if the two events are related.
View 2 Replies View RelatedI have an Asus Eee PC Seashell series and I'm trying to find a way to get my netbook to turn on everyday at a set time and open up a webpage like weather.com. It would be nice to be greeted by my netbook with the daily weather when I wake up. How can I set my netbook so that it turns on/wakes up at a certain time while opening a website as well?
View 2 Replies View Relatedmy Action Center in windows7 keep telling me about my windows security is turn off seems ok after i turned it on. But when computer restart/reboot it happen again.
View 10 Replies View Related
