Just installed 7229. I can't configure Outlook to the Exchange server. It just says that it is not connected. I have a 7201 installed also, where it works fine.
Outlook 2007 SP2 btw.
Any suggestions?
I am using outlook 2010 and recently have started having problems connecting to my exchange server account. It has been running hunky dorry since I installed it a few months ago.Now it occasionally connects to the server but mostly shows "Disconnected" all my other email accounts run correctly. Its not the exchange server as my phone and web exchange connect OK, my laptop is running 2007 and it connects OK.
View 1 Replies View RelatedI have recently purchased a new laptop with Windows 7 Home Premium x64. I installed Office 2007, which has updated to SP3.Using XP I used to be able to successfully use Outlook 2007 for my office email, which uses a microsoft exchange server. I have not been able to get this to connect using Windows 7 despite using exactly the same settings. I have also tried a number of other combinations as advised from other sites but I can't get anything to work?This microsoft fix was also of no help... Error messages when you try to connect Outlook 2007 to Exchange Server: "The action cannot be completed" or "Your Microsoft Exchange Server is unavailable" or "Cannot start Microsoft Office Outlook".I have tried various username combinations: username or domainusername.I have tried various password security options.This is the error message I get: Outlook cannot logon. Verify you are connected to the network and are using the proper server and mailbox name. The Connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action.
I use the following setting:
Use Cached Exchange Mode - unchecked
Encrypt data between MicroSoft Office Outlook and MicroSoft Exchange
Server - checked
Connect to my Exchange mailbox using HTTP - checked
Proxy authentication settings: Basic Authentication
After I imported a pst into my mailbox(using the option to replace duplicates) I know have strikethroughs on all of the duplicates that should have been replaced.
How can I get rid of these messages. I have also checked and the messages are not set to expire.
An issue with Outlook 2007 in combination with my Microsoft Exchange e-mail account was that it couldn't remember the password and I had to enter it every time I started Outlook. This was solved by adding a credential through 'control user passwords2', a workaround which can be found on several sites.
However, this doesn't seem to work anymore using Outlook 2010 with Windows 7. Or at least it seems to work different, but I can't get it to work. Outlook itself creates a generic credential in the form of MS.Outlook: USERNAME>@<EXCHANGESERVER>:PUT, but on another website I found the form MS.Outlook:<E-MAILADDRESS>@<EXCHANGESERVER>:PUT It also creates two Windows credentials, one with the username also as server and one with the correct exchange server, username and password. What should I add to make Outlook remember my password?
I also tried some other workarounds for previous versions of Outlook, but they all didn't work. I tried these: Stop Outlook/Outlook Express Asking For Your Password Every Time | Windows Vista | Windows Tools, Help & Guides Outlook 2007 won't save passwords in Vista...save password..
[URL]
I installed Win7 (at home) and when I try to configure Outlook 2003 to connect to the exchange server that our company uses. It cannot get access to this server. It says outlook must be online to access the exchange server.
All other internet access works perfectly. I've checked and rechecked all the settings. They are correct. It worked fine on VISTA. I did a Windows 7 Ultimate upgrade. Continues to work fine on my XP Pro station. Seems like something is blocking it from going out over the Internet.
I have Avast anti virus running as my preferred AV software. To date I have not needed to use Outlook, but this year its usefulness increased as it saves me accessing work emails through my browser (as well as maintaining the calendar and stuff). So, I start the first run set up. All went well until it asked me to log on to the exchange server. When I did so it refused, eventually telling me I had to turn off the SSL(?). From what I could see, I could only do that after the address was entered into the profile, which it won't let me do. I did some digging and read (somewhere) that Avast was the problem. I tried temporarily disabling filters and logging on again, but no different. As a test, I fired up my laptop, also Windows 7, disabled the Avast filters, started Outlook for first use, set up the Exchange connection, logged on fine. Restarted the filters, all good! So next I try to reset Outlook to first run on my desktop. Can't do it. It resets Outlook to default, but doesn't bring up the set-up screen. I suppose I can uninstall Office all together (I'd only need to back up OneNote at this stage) and run a registry cleaner, but I'd rather not at this stage. I tried importing the registry settings from the laptop (no lectures please). This sort of worked; it now tries to log on to exchange on start up, but still fails. Something is still blocking the connection. Any ideas on what the block is?
View 1 Replies View RelatedI have exchanged two keys on my laptop keyboard .... (Windows 7)" was exchanged with the @ ........ as I was used to using a UK keyboard. I am passing that laptop to my daughter, as I have a new one. I set the keyboard back from UK English to English Australia. but it doesn't seem to have changed the keys.
View 3 Replies View RelatedWhen a User is setup to Exchange using MS Server 2003, 2008 or 2011 and there are a lot of mail content to upload to the mailbox, and also this User is working on 2 workstations. For example a Desktop at the office and a Notebook traveling home with the User. I have to in several occasions upload the mail using 1 workstation and then let the other download which means that this is something awful to wait for sometimes.
And all I need to know if you import the mail directly into the workstation for the uploading if importing it into the second workstation will create duplicates on the Exchange. I haven't had a chance to test this with dummy accounts or anything to see the outcome and if possible this would save me much time in the future. What are the options.
I had Outlook 2003 set up with two different mail accounts. One was a work account that I set up as an Exchange Server account so I could share calendar, contacts and all email folders.When I purchased a new laptop and migrated programs / data from and XP machine to the new Windows 7 machine I noticed that my work account had been converted to a pop3 account and no long enabled calendar sharing, sent folders,tc. and I could no longer send emails.I'd like to be able to have another Email Account so I can set it up in Exchange format, but I can not figure out how to do that in Windows 7.When I try to start Windows Mail from Programs menu it is missing. I assume this is due to an answer I gave during set up which leads me to believe Outlook 2003 is not wholly compatible with Windows Mail.If I want to continue to use OL2003 with Windows 7 should I just bite the bullet and set up my work account as a pop3 account, or is there a way to create a new mail account that I can set up in MS Exchange Server
View 7 Replies View RelatedI reformat my laptop aspire4741 from window7 home basisc to window7premium my bluetooth exchangefolders were gone and the pc bluetooth is notworking. What and where do can i find the correct software and lnstaller for my laptop?
View 1 Replies View RelatedWhen using 2010 to do name discovery I am getting "An unknown error occurred, error code:0x80070057" it stops and no connection to the exchange server is name.
View 2 Replies View RelatedHaving successfully moved my address book (.WAB format) to w7 and converted it to .CSV format I can get as far as "Select the Contacts folder that you want to import to" as in the website [URL] but when I click "next" the box is blank where a Contacts folder should be. In outlook 2003 I have some contacts which I added manually to address book so there should be an address book of some sort.
View 4 Replies View RelatedI have over 13 years of Outlook Express folders and addresses that I desperately need to convert to Outlook 2007. I should have imported them into Outlook before I made the "Easy File Transfer" to the new Win 7 machine, but didn't know I needed to do that. Several years ago I had imported the files into Outlook, although that data did transfer it is now way out-of-date and full of duplicates.The up-to-date data is still in my old machine and also in an external hard drive backup. I have isolated the Outlook Express personal folders into .dbx format and the addresses into .wab format.Is there a way this can be reformatted into Outlook? Or is there some other way? I would probably also need to delete what is already in Outlook first, or I would have many more duplicates.
View 3 Replies View RelatedI am trying to move one pst file from one laptop which has Outlook 2010 32 bit to another laptop which has Outlook 2010 64 bit installed, steps taken 1) Copied the pst file from the User/AppData/Microsoft/Outlook folder to usb. 2) Pasted the file from usb into User/Documents folder. 3) Tried to open the file in Outlook and I get the error that Outlook encountered errors while opening the file. Now how is that possible when the file is working perfectly in one laptop but when I copy and paste it into another it gets corrupted? Is it due to 32 bit to 64 bit outlook? I tried to repair it using scanpst and it brought back few mails?
View 1 Replies View Relatedi have just installed ms outlook 2007 on my laptop. I am using windows 7. I am not able to send/receive mails in it. Whenever i try to click on send/recieve tab, everytime it gives me an error messege with code (0x80042108). Not able to use my outlook. I have configured my yahoo mail id in it.
View 1 Replies View RelatedI do not have the new laptop on, it is an expensive paper weight at the moment. None of my XP software works. I loaded MS XP Mode, I was able to load Office 2000, neither Outlook or outlook express work and I dispise MS Mail and all web based mail. None of my CAD programs worked in XP mode. Note: Acer does not have the hardware support. I removed MS XP Mode. Loaded VMware Player with XP Pro,loaded all my programs, copied my old HDD to new files in virtual machine. Setup Office 2000 Outlook and outlook express work perfect as does all office 2000. Cad programs work (or so I thought) I wasted 3 hours designing a generator room in one of my cad programs and all was well till I tried to create a new file on the virtual drive and was unable to. Tried to save my drawing to any file, was not allowed.
Spent the rest of the day re-drawing the generator room on old laptop. Tried all of the things on setting up networking the drives and folders, was still unable to create new file folders or save any new cad files. There is nothing wrong with this old laptop, it is just 6 years old and found a great deal on the Acer. Tried to load XP on a new HDD, that failed (somewhat) after loading and looking at the properties, many drivers were not working. It seems all MFG's are looking to MS to develop their drivers.What else can I try to get XP Mode to work like XPI can not afford to upgrade all my programs and with that, none of my old files would be usable.I use several cad programs daily at the same time as I work on several projects at the same time, plus I do all my own quotes and PO's and send to vendors, plus receive in everything. I have to be able to create new files and save everything I do where I want toThis is also the first time I have used a new OS so soon. I usually give it a few years.I went from 95 2nd Ed to XP all was smooth. Stayed away from ME and Vista like the plague
When I loaded Office '07 after Windows 7 install, all works fine except when I start Outlook, an error message as follows, pops up:
"Cannot start Microsoft Office Outlook. Cannot open the Outlook window."
Anyone else get this?
whatever i try to do on my outlook that has to do with .PST file management results in a crash where outlook quitsif i go to control panel > mail settings > data files 2 of the files that are in use (& work) do not show up, one of them the default mail delivery .PST. in these two, trying to access the advanced properties gives an error:The operation failed. An object could not be found.now - general googling tells me that recreating the profile could perhaps fix this - but i would love to avoid that as there's no manageable UI to set up the email accounts and there's many in use.event log on trying to open a pre-existing .PST that's not in the current profile:
Faulting application name: OUTLOOK.EXE, version: 11.0.8169.0, time stamp: 0x465f28e3
Faulting module name: msmapi32.dll, version: 11.0.8164.0, time stamp: 0x4627afa6
Exception code: 0xc0000005
Fault offset: 0x000ffccf
Faulting process id: 0x30c
Faulting application start time: 0x01ccc51f6b43b93b
Faulting application path: C:Program Files (x86)Microsoft OfficeOFFICE11OUTLOOK.EXE
Faulting module path: C:Program Files (x86)Common FilesSystemMSMAPI1033msmapi32.dll
Report Id: b49bb612-3112-11e1-949b-00e04c09fab2
I have a new Dell Inspiron 14Z running windows 7 pro 64bit and i'm using Microsoft office 2010. I'm trying to retrieve archived emails that i backed up on an external hard drive from a previous computer, the files are .pst which is an outlook format but i keep on getting an error message saying the file is not an Outlook data file (.pst). i dont have any other way to retrieve these emails since they were deleted from the server and its about 1.5 years of work emails. Not sure what to do? should i move the files from the external driver to a different location on the computer and open them, or are they corrupted and need to be fixed?
View 2 Replies View Relatedhow could I open outlook 2007 for my OS Windows7. the err shown 'cannot start outlook 2007. unable to run outlook for window 7'
View 6 Replies View RelatedI have an old XP laptop which I was using Outlook Express for one of my mail accounts (a work account). I also ran regular Outlook for another (personal). I want to have both of these accounts on my new PC.
My new PC is running Windows 7 wiht Office 2007. I used the Windows transfer cable and things worked failry well. My regular Outlook files all came over well, but nothing for Outlook Express.
I really would like to take this time to somehow export my OE files into my Outlook 2007. I would really like to keep the account which imported in on Outlook seperate.
Question 1: Is there a way to import my OE files into Outlook 2007?
Question 2: Is there a way to have two seperate email accounts in Outlook without combining them? Basically I want to have a work email and a personal and keep them seperate.
If I can't have two seperate emails with Outlook, can anyone suggest something which would allow me to export my old Outlook (the old personal emails) into another program so that I can at least use my work email on Outlook 2007?
Outlook 2010 Windows 7 64 bit Outlook will not open; Outlook pst file missing
View 7 Replies View Relatedi have just got a new pc with windows 7 on it and have installed office 2007.my old pc was windows xp and outlook express 6
how do i get the emails from my old pc into outlook 2007 on my new pc?i can copy the pst and dbx files but are these the right ones and wht ever i seem to do i can get outlook 2007 to import the emails
I recently purchased a new computer that has Outlook on it. I need to import my emails and especially my folders from my old computer that has outlook express on it to my new computer that has outlook.I do not have both outlook and outlook express on my new computer.
View 8 Replies View RelatedI have many, many Outlook messages on my HD that I stored in .msg format. I am about to set up an old laptop that will not have Outlook on but will have those stored messages either on it or accessible on a USB device.Is there a piece of software around that will let me read those messages? I've tried to do it with Thunderbird but can't find a way just to read individual, stored outside of Outlook's pst files, messages.
View 2 Replies View RelatedI just received my new laptop running windows 7 and I installed Outlook Mail 2003. I'm trying to import old outlook express mail (version 6) from my old laptop. Can someone tell me how to do this?
On a related topic. Should I install Outlook 2007 on my computer instead of 2003? I chose the 2003 version as I have read reviews that Office 2007 is no good. I'm asking because I can see Microsoft releasing a new version of Office which would be more compatible 2007 than 2003.
I am about to buy a new computer with Windows 7. On my present computer I use Outlook for personal mail and Outlook Express for online purchases. I understand it costs $200 to get Outlook now and Express is no longer available. What can i get to replace both of these?
View 1 Replies View RelatedIs there a way that I can sync my Outlook contacts with my Iphone 4s so that the contact appears as displayed by outlook. Example: Mr. Richard Jones FILE AS: Rich Jones
This is the option to display in outlook and I would prefer to display on phone the same.
I have a office setup where two of the computers run on windows XP professional and the other two run on Windows 7 home edition. I want to connect all of them to a common printer through the port. Both the computers on win xp have been connected successfully but the other two on win 7 I am unable to connect, seems some patch is required.
View 2 Replies View RelatedI need to connect to a DNS Server over the internet. I have tried setting the DNS as the server IP but I really don't know what I'm doing when it comes to this. The server is running Server 2008.
View 1 Replies View Related