I'm trying to put stuff from VCR tapes onto DVDs. I've put them from my VCR tapes to my pc using dazzle. Then I drag them on to go on to DVDs. It was working fine, then something happened. Now as soon as I drag even a short video onto a blank DVD a message pops up that I don't have enough space
View 5 Replies
I don't know if i accidentally pressed cleared room or sell, my living room just disappeared while buying new room , please help me some of my stuffs are there too and they are gone too.
View 14 Replies View RelatedI use Windows 7 Home Premium. Only 3 months in use.When checking the remaining available room on my HD, I found from the one to the other day that there was a drop of 6 GB. I did not install "heavy" programms.
View 6 Replies View RelatedI recently upgraded to windows 7 on all 3 of my home computers and i am loving it so far.There is 1 problem i can't solve myself and it has to do with my home server freezing up whenever another computer in my home network stream a dvd (or sometime even a small divx) movie from it.Strange thing is, the same setup worked flawlessly when i had vista on all my computers so that rules out that its any hardware issue (maybe a driver issue from nic or something?) PC1 where i think the problem is.My main computer with al the media on it im going refer to as server, this pc has Win 7 Ultimate x64 installed on it, intel core2duo E6850 @3,0Ghz, 4 gigs DDR2 memory and an Asus P5K motherboard.All my media is on a shared drive on this pc and all other pc's can access it through my home network. PC2 the one i use to watch movies.My 2nd pc is in the livingroom and hooked up to my flatpannel tv, this pc ill refer to as my mediacenter.This pc has windows 7 ultimate x32 installed. It has an Intel Pentium 4 3.4 CPU, 2 gigs DDR2 memory and an Abit AB9 Quad GT motherboard. My network settings.My home network is completely wired (no wireless devices whatsoever) and all connected through a netgear FVG318 Router. There is no password on sharing and every setting in my home network is set to share everything with all others in my network, so all if freely accessible.As said all my media is hosted on my server computer, there are DVD's divx movies and some music and pictures.Whenever i try to watch a DVD on my mediacenter the movie freezes, sometimes already in the titlescreen but also sometimes 5, 10 or even 30 minutes into the movie. The freezes are completely random i guess.The mediacenter workes fine after a freeze, only error i get is that it cannot connect to my server.When i goto my server i at first noticed that my network connection was lost on my server.After some trial and error i found out when i disable my networkcard on the server and after enabled it agian i could continue watching my movie on the mediacenter but it the freeze kept happening.Then i thought it might be a power save setting so i made a powersave scheme where nothing turns off, no hibernation and not even the display turns off.Also i changed some setting in the network card on my server telling it that it could not be turned off to save power.After all this done when i watch a DVD now on my mediacenter my whole server just freezes after a while.I still see the desktop screen and my mouse mointer but i cant move it, no error msge its just a frozen screen.I also browser my system logs and looked for errors around the time the freezes occur but i cant find anything related. the only errors i see are after the system halted.The log stated the system has been shut down unexpecedly (couse i pressed the off button) and after it restarts i see i couple of performance index errors (WmiApRpl).
View 5 Replies View RelatedI have been having a bit of trouble with windows 7 lately, namely that it won't start up right. When I boot from the drive normally, it gives me the classic "BOOT DISK ERROR: INSERT SYSTEM DISK AND PRESS ENTER" message.
However, I soon discovered that if I boot from the Windows 7 cd and do not boot from it (By ignoring the "Press a key to boot from CD or DVD..." Windows 7 boots up fine.
I've tweaked my BIOS over and over, but the same problem persists. The drive is brand new and fine. What can I do?
I have IOmega 1 TB hard drive. 2 days ago, my comp restarted suddenly after which my external drive is corrupted.I get the error 'H: is not accessble' The disk structure is corrupted and unreadable.It shows up in the disk management as RAW file system,I have almost 700 GB of important documents, pictures & files that I don't want to lose.Does anybody know of any good recovery software that can help.
View 5 Replies View RelatedMy C: drive only has 45.4GB TOTAL. While I have two other drives, D(has 2TB) and E(has 500GB). My problem is, everything is installing into C drive automatically. How do I change this?
- I tried switching the drive letters but there's always the "Parameter is incorrect" error(probably because they run the computer).
-Tried going to regedit and editing microsoftwindowscurrentversionprogramfilesdir (also tried editing other files but I attempted to install a program, did not change the installation directory)What do I do? I can't install any program that automatically installs into C drive (for example skype).
I've seen this somewhere, but I can't for the life of me find it again. There is a way of setting only certain remotes to work with certain PCs so they don't interfere with others. I have my HTPC and laptop in the same room, both with IR receivers - whenever I use the remote for my PC, the laptop ends up with all the signals too, and I come back to find it's playing a video or something.
Does anyone here know where that tutorial/registry setting is to change remote control channels?
I just did a fresh install of Windows 7 Professional on a 60GB OCZ Vertex 3 and the drive is down to a remaining 15GB out of 55.7 total available space. This is confusing because my last several installs of the exact same OS on the exact same size drives took up much less space. Even after installing several programs like Photoshop and Office, I still had 24GB to spare on my last install with a 60GB Agility 2.
View 14 Replies View RelatedI have wifi connection my asus laptop cannot access it when iam in my room upstairss but my ipod can ,, what shall i do to my asus laptop.. it cn access wifi when iam in the sofa but when i go up to my room no internet connection
View 1 Replies View Relatedi have a toshiba satellite C650 that has recently come up with a disk read error. I want to access the command prompt to try some potential solutions that I have read about on the internet. I have made a Windows 7 recovery disk using my other acer laptop which also has Windows 7 installed. When I use the recovery disk and it has loaded the files etc it just brings up a black screen and the cursor. I tried booting my acer laptop from the recovery disk and it worked fine. why I am getting the 'disk read error - hit ctrl, alt and delete to restart' message?
View 6 Replies View RelatedI recently bought a new cisco e2000 router and had no problem connecting to it on all the devices in the house (about 10 of them)Just now, all the devices in my room (ipod, netbook, phone, and laptop) lost a connection to the router and no matter where I am in the house none of these 4 devices can get a connection. I can see other networks, just not mine. They all worked perfectly fine before, and out of nowhere they stopped working. Other devices that were not in my room at the time of this 'wifi surge' still have a connection to the router.The wired connection works and that's how I'm typing this right now.
View 3 Replies View RelatedI just cleaned my laptop and it released a lot of dust, so my temperature is lower. The weather is currently very, very, very hot and my laptop is running 55-60C normally when i browse the internet, in a very hot room. Before i cleaned it - it was very hotter. I'm even sweating and i don't wear a shirt. But that's not the point. I i am running prime95 to test the processor, and after 1 minute of 100% usage it gets to 90C in the hot room again. But when i go to a clearly cold room, it doesn't turn off, it barely reaches 80-85C but never the maximum 90C.are the fans not spinning correctly or is the room temperature really important for a laptop?
View 2 Replies View RelatedI started my pc,and i get this error."disk boot failure insert system disk and press enter"
Windows 7 will not load.I have the disc which i assume re-installs windows 7? Will this delete all my files i currently have on the drive?
i get this after i restart my computer with a black screen.
"NON SYSTEM DISK OR DISK ERROR"
I have on my computer XP pro installed on C:
Then I have a partion E: for the windos 7 beta 1 with 50 Gb
I started the computer with the WIndows 7 DVD and the win 7 start to install and extract the files and then restart and the follow error comes:
A disk read error occurred
Press CTRL+Alt+DEl to restart
But I can't do anything, the computer hangs
I must backup the xp, because the boot of xp was overwrite.
I just attempted to use Partition Wizard to repair my MBR after installing Ubuntu and having issues with a BSOD in Windows (0xC0000225).Now when I reboot all I get is "Non-System disk or disk error." I can't run fixmbr using a recovery disk because apparently that command no longer exists!
View 1 Replies View RelatedI will try to be as descriptive as possible. I currently have GoWifi to access my internet (my room mate has it to)But for the past 4 days my computer has been running horribly slow. I can't use a enthernet cable becuase "Gowifi" is only wireless. I use google chrome most of the time, but the internet is slow on chrome and explorer. I have tried the "ipconfig /release then ipconfig /renew" method. I have also tried to Reset WINSOCK, Reset IPv4, Reset IPv6, and then restarted my computer but still did not do the trick. I have tried various things from forums on other sites and this site but it still is not doing the trick.Is there Anything you guys could tell me that could fix my problem? And i do have a windows 7 computer.
View 1 Replies View RelatedTLDR: I get the "A disk read error occurred" error but the system disk is readable and checks OK in the recovery USB. So, I have two hard drives--a terabyte drive with some data on it and a smaller drive with the Windows 7 installation on it--and a USB drive. I made the USB drive into a recovery USB using the instructions here Installing Windows 7 System Recovery into USB Flash Drive | Raymond.CC Blog with the addendum found in the comments. I made a system image of the smaller drive via the control panel and then put the image in the terabyte drive. I then replaced my smaller hard drive with a new drive of a comparable size.In order to restore the drive, I booted into the recovery USB, formatted the new hard drive with ntfs, made it active, and ran wbadmin start recovery -version:xxx -items:C: -itemtype:Volume -backupTarget:C: -recoveryTarget: where C was the terabyte drive and D is the new drive. I may have the drives mixed up here, but I assure you I had them correct when I actually ran the command
After a reset, I got some generic error so I went back into the bios, and set the new drive to be at the top of all boot lists, and then rebooted. It was at this time I got the above error. I feared that my drive was actually DOA, so I booted back into the recovery. I did a D:;dir and saw that all of my old files did indeed exist, so I figure it was a boot issue. I ran the boot repair utility in the recovery menu and it said there were no errors and I should restart. I didn't restart, and instead ran a chkdsk D: /f and found no errors. I did a bootsect /nt60 /all /mbr and restarted and still nothing changed. I even tried a "bcdedit /timeout 10" and I do not see the boot loader before getting this error. Not sure if that is expected or not but I'll throw that in here.
I was working on Photoshop and had a "scratch disk" error... and checked my memory availability and was shocked to see that most of it was used. I don't have a whole lot on this laptop.I tried disk cleanup. That helped a little but barely made a dent. Lots of memory was sitting in some dump file. Everything is clean that can be clean but there is something hiding.
View 8 Replies View RelatedI have had the same problem for more than 6 months..None of the solutions anyone posts has worked. This is my second time posting here. Previous threads have been closed, but not because any solution was found.It's possible there may be more than one cause for the same or similar error.I've had this problem now for the last 6 months at least. Every single time I use Chrome.. it's the same thing. My system freezes and I have to wait for the dialog to pop up with Chrome.exe and please insert a disk in blah blah blah.. When the dialog pops up right away I can just click try again and it goes away, but other times the dialog doesn't pop up for a minute or longer.Incredibly frustrating. It makes me want to chuck my computer out the window, even though it's an awesome computer.
View 5 Replies View RelatedI recently tried to install a mac osx on my computer that was currently running windows 7. I created a separate partition on my 320GB hard drive that was unallocated space until I partitioned it. After I installed it, when I tried booting into that hard drive, I got the non-system disk error. I went back into the mac osx install disk and erased the osx installation.
I then put in the windows 7 installation disk and clicked repair my system. It searched for startup errors and found that the Boot Manager was missing or corrupt. Is there any way I can reinstall the Boot Manager without reinstalling all of Windows 7? I ran the startup repair a few times until it could not find any problems. Now it says: Disk Error. Press any key to restart.
For some time i was having an issue with my pc when I'd restart or Reboot it would do the Compaq screen the go to a black screen with a flashing | and I'd have to use CTRL+ALT+DEL then hit ESC on the Compaq screen to enter boot menu and manually select my Hard Drive. One day I was uninstalling unused programs on my pc to free up memory and one of them was Windows Essentials after I was done uninstalling all I wanted gone I rebooted and the problem did not persist.Now I do not claim that Windows Essentials was the cause but I just barely reinstalled it to get Windows Movie Maker back and I had to reboot after installation and now I get Disk I/O error Please reinsert the disk and try again, or something like that, and have to do the boot menu trick again.
View 2 Replies View Relatedwhen i try to run my disk defrag it says "Disk defragmenter cannnot start because the task scheduler service is not running. Start the task scheduler service and try again" I tried to open the task scheduler but that isnt working. When i open the task scheduler it says "The remote computer is not found." If anyone knows what i can do i would appreciate it.
View 2 Replies View RelatedEvery time I open a new tab, or even a new instance of Google Chrome, or sometimes even just clicking a link on a page in Chrome, Chrome freezes, and sometimes other apps freeze too, and after somewhere between 10 seconds and 60 seconds, an error message occurs.The error message is titled "chrome.exe - No Disk" The message body says "There is no disk in the drive. Please insert a disk into drive DeviceHarddisk5DR5.It presents three clickable options: Cancel, Try Again, and Continue.If I click Try again or Continue, I can usually (99% of the time) move on without further problems, but the big problem is the delay between when the offending activity occurs (opening a new tab or instance of Chrome, or clicking a link on a page in Chrome) and when the error message shows up.
Here's my machine data:
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Professional , 64 bit
Processor: Intel(R) Core(TM) i7 CPU 930 @ 2.80GHz, Intel64 Family 6 Model 26 Stepping 5
Processor Count: 8
RAM: 12278 Mb
Graphics Card: NVIDIA GeForce 9800 GT , 1024 Mb
Hard Drives: C: Total - 76316 MB, Free - 10092 MB; D: Total - 111099 MB, Free - 109455 MB; E: Total - 842765 MB, Free - 610592 MB; M: Total - 953634 MB, Free - 779505 MB;
Motherboard: ASUSTeK Computer INC., P6T, Rev 1.xx, 103986630001623
Antivirus: None
to get the items in the pendrive when the computer is not responding with the device showing " your disk is not formatted".
View 1 Replies View RelatedI keep getting the same-A DISK ERROR OCCURED then it keeps telling me the same t
View 1 Replies View RelatedI laptop is Windows 7 celiron processor, just a month back suddenly it is giving an error saying "Error to detect Hard disk". I tried to run diagnostics on hard disk, it says no disk foun, replace.
View 6 Replies View RelatedI am asking this question about a netbook we have so the stats that are connected to my profile are about my PC and are irrelevent for this question On the netbook, With Windows 7 (most basic edition. BTW, do urself a favor and never buy a netbook),we have 2 drives named:
C: WINDOWS
D: Data
116 GB on each.
C: Has become full, so i connected my cam, while it was importing i clicked on Import Settings and changed the destination to D:/new folder. Then the import restarted itself, and started importing, but then the same pop up message came up and said "Not enough room on C:". OK man i know, but ur supposed to import into D: .
Reconnected cam, happened again.Seems like the computer is INSISTING that i import into c: . Maybe D: isnt meant for personal media, which is annoying?
I have an Acer Aspire One Happy and have got this message:
"A disk read error occurred Press Ctrl+Alt+Del to restart"
I have been searching for solutions all day but I can't do any of the options described. Pressing f8 to enter safe mode does nothing, nor does alt+f10. I also don't have a cd drive as its just a netbook and no recovery cd came with it even if I did have a portable one. Anyone have any ideas? I'm on a boat in the Arctic for the next month and without my laptop I will likely jump off an iceberg!
Every time i boot my computer i receive this message, after several restarts my system will load up the windows, n i can use my PC,,, n if i turn on the Pc after some hours same error message again.. have restart my system several times to get it work... What's the problem here... i think it's not hardware problem if it was it wouldn't have booted up my OS after several restarts... Is this something gotta do with registry, after messing with registry i have started to get this message, Is re-installing my Operating System only the solutions.
View 1 Replies View Related
