"Not Supported Mode" When Trying To Connect PC To Samsung Tv Via Display Port?
May 21, 2012
I'm trying to connect my PC to my TV. I'm using the display port on my Lenovo thinkpad, and using a converter to connect an HDMI cord from my computer display port to my TV. However, when connecting, I get an image on my TV screen for several seconds, then I get the message "not supported mode."I've got into my control panel and adjusted the screen resolution, setting the TV resolution to highest (1920 x 1080). The computer screen is set at a refresh rate of 60hz, but the only option I have for the TV is 30hz, interlaced.Lastly, I have three hdmi ports on the TV. The closest I've gotten to getting this to work is plugging the HDMI cord into port 3, which is set as "game" on the TV settings.
Does anyone have any further recommendations on how I can get this to work? When the image shows for 5 seconds on the first port, it's very clear, but then goes to "Not Supported Mode". The third port shows the image, but is very fuzzy with lines shaking across the screen, so clearly, neither of these options are currently working.
View 2 Replies
ADVERTISEMENT
Oct 31, 2012
connecting samsung s5222 mobile with my lap top for internet purpose
View 1 Replies
View Related
Feb 4, 2013
How to connect samsung s5620 to internet using samsung kies in pc for windows7
View 1 Replies
View Related
Jun 13, 2012
i just bought a brand new HP with windows seven on it. i am trying to do a "duplicate" display on my screens. one of them is my regular montior and the other is my 50 inch samsung tv but whenever i click on duplicate display it says MODE NOT SUPPORTED on my tv. i am using the GVA i believe it is, the BLUE plug for my tv and the white one for my montior. so i went and bought a graphics card thinking it would help and it hasnt. i still see the mode not supported on my tv but my computer down here in my basement is fine. and ideas? i'm running a 50ft GVA "blue plug" to my tv since its upstairs and my computer is here downstairs and i want a duplicate on it. so whatever im doing here on the computer will show on my TV upstairs.
View 1 Replies
View Related
Nov 6, 2012
how to install window 7 in samsung laptop through usb port tell me BIOS setting for installing window 7 through usb port
View 1 Replies
View Related
Jun 6, 2009
I'm having trouble with CS 1.6 . The game would only run in Software Mode and whenever I try to run it in OpenGL this error message appears:The specified video mode is not supported.The game will now run in Software Mode..Mobile Intel(R) 945 Chipset Family (Microsoft Corporation Pre-release VDDM1.0) is what I have. I think that maybe the problem could be that it's a Microsoft prerelease driver version or somewhat. I've tried checking on Intel's website but I've only seen either Intel 945GM or Intel 945GMS or something like that.
View 9 Replies
View Related
Nov 3, 2009
Sacred 2 game not supported by Windows 7 64 bit, even tried in XP mode. Anyone else have issues with this game and windows 7 64bit?
View 16 Replies
View Related
Nov 1, 2011
I have been having troubles with my display port monitor, and I just realized that the monitor is picking up 1923x1080 60hz (thats what the HP settings say on the monitor) but according to Windows its sending out 1920x1080. ATI Radeon 5770, I don't have CCC installed because of previous issues, any ideas why I'm getting such an odd resolution?
View 6 Replies
View Related
Aug 23, 2009
I have very unusual problem. New HPZ800 quad core with QuadroCX video card running Windows 7 64bit release candidate. 6 mb Ram. Remarkable performance.
Bought dreamcolor HP Monitor. Ran fine. Latest firware. Newest Nvidia drivers. Newest monitor drivers. Calibrated fine with Spider Elite colorimeter. Profile appears very good.
One hour later goes into screen saver mode or something. Black screen using Display port. Use display port adapter to DVI cable works fine. This appears to exclude bad display port output from card.
This is the second monitor that does this. The first was reported as monitor defect.
Anyone had this experience or suggestion?
View 4 Replies
View Related
Feb 9, 2012
Set up:
OS: Windows 7 ultimate 64-bit
Graphics card: Radeon HD 5450
This graphics card is connected with a samsung syncmaster 2253bw (Main monitor) and a samsung LED TV ue40b6000vpxxn (HDMI to HDMI).
Screen Resolution Syncmaster: 1680x1050
Screen Resolution LED TV: 1920x1080p
Problem Description:
I've connected my graphics card with the hdmi 1 port of the led tv. The tv only shows a crispy image of the first few boot screens whenever i turn my desktop on. The tv shows the error "Mode Not Supported" once it gets to the account login screen. According to the tv manufacturer's manual, the screen resolution and refresh rate of both screens should match in order to get it working.
Actions taken:
I've tried out all possible screen resolution combinations at the control panel of the pc. None of them gets my tv to show what's on my main monitor screen.
Question:
Are there any other steps I can do in order to use my tv as a pc display?
View 3 Replies
View Related
Nov 22, 2012
Currently having resolution issues with my 26" Samsung LCD TV (Model #LN26B360C5D) when used with an older Dell Dimension 3100 PC with Windows 7 Ultimate, SP1.After a re-install of Windows 7 done by a colleague, for some reason my TV won't display it's native resolution of 1366x768 which I'm almost 100 percent sure it had before because I didn't notice any distortion or quality loss. I checked the drivers of both the monitor and the adapter and they read as follows:
-Adapter - Standard VGA Graphics Adapter
-Monitor - Generic PnP Monitor
When I first plugged the VGA cable into the PC, after the re-install, a Samsung driver option appeared and then quickly changed itself to the Generic PnP driver. I have searched all over the web and cannot find the corresponding PC driver from Windows that will work with my TV (if that is even the issue). I also tried booting in Safe Mode and into low-resolution 640x480 and changing the resolution manually hoping that would work but it didn't. There are several Samsung drivers on the PC when I deselect the option "show compatible hardware" in the screen resolution window but I can't figure out which driver works for my tv.
View 7 Replies
View Related
Jul 6, 2011
I am getting a lot of BSOD when my laptop is connected to an external monitor using a display-port cable.The system is fine when I don't use a external monitor and use just laptop screen. External monitor is a Dell 30inch. I have tried different display-port cables, different monitors, tried connecting via vga...still get BSOD, so I am thinking the problem is more on the windows 7/software side rather than hardware.
1. Uninstall AVG free edition 2011
2. Upgraded network-gigabit driver directly from intel instead of Lenovo
3a. Upgraded Nvidia drivers directly from nvidia for Quadro 1000m (ver 8.17.12.7533 - 5/20/2011) - got BSOD within 30min
3b. Downgraded Nvidia drivers to version from Lenovo (ver 8.17.12.6696 - 2/2/2011) - still get BSOD but there is more time between BSODs.
I am using a lenovo w520 laptop, win 7 SP1, x64. 8gb memory, intel 510 solid-state drive, Nvidia Quadro 1000 and Intel HD Graphics 3000, No-Anti-Virus and running zone-alarm firewall.
View 4 Replies
View Related
Jun 6, 2012
I have an xfx radeon hd 6790. I am using the hdmi port and the display port for two tvs and I am using the vga (I think its called the vga) port it sez right on the box that it supports 3 monitors. I can switch between any two that I want but I cant get all three to work at the same time. I try to use all three at the same time I get "to extend the display another display must be disabled".
View 3 Replies
View Related
Dec 3, 2011
For some reason now I can't seem to extend or duplicate my displays anymore. I am trying to extend from my computer monitor to my tv but I can't seem to get it to work. I can make it show up only on the tv or only on the computer monitor but not both. In AMD Vision control center it tell me "This operation is not supported based on current display configuration" - when I try to extend "Duplication of displays over multiple graphics processors is not supported" - when I try to duplicate?
View 4 Replies
View Related
Dec 25, 2011
I bought a cable with ESATA on one end and SATA on the other end. What am I supposed to do with it? I connected a standard SATA drive to one end and the other end to the ESATA port on the back of the computer, and used an external power supply for the drive. The BIOS does not see the drive. Suspecting the drive needed to be powered from the same power supply as the computer, I plugged the drive into a normal power connector in the computer, but used the new cable to connect it to the external ESATA port. Still the BIOS sees nothing. The drive works perfectly as a SATA drive in the normal SATA connection.
View 9 Replies
View Related
Sep 2, 2009
i tried to connect my TV to my laptop through the HDMI port.
but under the screen resolution there is only my main screen.
View 8 Replies
View Related
Jun 16, 2011
I'm trying to install Sophos and there fore the following ports need to be open: 8192, 8193 and 8194. All firewalls are disabled. But when I do telnet ip address 8192 (where ip address is the ip address of the problem pc) from the server I'm getting the following error message: Could not open connection to the host, on port 8192, connect failed. It's the same result for the other ports.
View 3 Replies
View Related
Aug 13, 2012
i want to get driver software to connect internet by pc
View 1 Replies
View Related
Dec 7, 2012
How to connect samsung gt c3312 to pc
View 2 Replies
View Related
Nov 18, 2011
While my pc is on, I plug in the usb cable of my canon pixma MP276 printer. When the usb cable contact to the usb port, the lcd monitor goes into power saving mode/sleep mode (black) immediately and never turns on again no matter what I do (clicking on mouse, pressing keys on keyboard)I then need to restart the pc and everything will be normal.
View 6 Replies
View Related
May 13, 2012
I am having problems connecting my laptop to my samsung tv. i have used a vga cable and rca cables. i have picture but no sound.
View 2 Replies
View Related
Nov 6, 2012
I have connect my pc to the Samsung player using an ethernet cable to the pc and blue-ray. It then displays devices on the tv it shows my pc and users. When I hit enter on the Blue-Ray to access the PC I get this message.Request cannot be completed. MEDIA PLAY will be returned to the main screeen
View 1 Replies
View Related
Mar 11, 2012
iwant to connect samsung m8800 on loptop internet
View 1 Replies
View Related
May 6, 2012
how can i connect Samsung galaxy y duos to my PC where I get its driver?
View 1 Replies
View Related
Jun 5, 2012
How to connect to the internet using Samsung kies
View 1 Replies
View Related
Aug 5, 2012
I have Samsung e2222 mobile phone i want to connect my phone to pc for internet but it not work i have also kies s/w.
View 1 Replies
View Related
Aug 12, 2011
i am not able to connect internet through my phone using samsung
View 1 Replies
View Related
Jul 6, 2012
how to connect to internet via samsung kies with E 3322
View 1 Replies
View Related
Nov 4, 2012
connect samsung galaxy y gt-s5360 to pc for internet?
View 1 Replies
View Related
Nov 11, 2012
how to connect internet via samsung galaxy y s5360 with kies
View 1 Replies
View Related
Dec 15, 2012
How can i connect my samsung GT-c3312 mobile with laptop
View 3 Replies
View Related
