No Files Or Programs Showed On Hard Drive
May 26, 2011
When I turn it on windows starts fine but no programs show on the desktop or start menu. I originaly thought everything was gone but all of the virus protection loaded and seems to run fine, and I can run the programs that appear in the notifactation toolbar. When looking at C: it is empty, no folders, nothing! In the add/remove programs it shows everything is still installed. So i am making the assumption that all of the files and programs are still on the hard drive and intact. So at this point i am trying to figure out if this is a hard drive issue or most likely a windows problem.
View 3 Replies
ADVERTISEMENT
Jul 7, 2011
So, I order a new custom computer and want to install my two old hardrives from my current computer. Both hardrives have lots of programs and info on them. The main on has windows 7 32 bit installed plus several programs. The new computer will have windows 7 64bit. Is it possible to install the old hard drive and access all the programs and files on it even though it has an operating system on it? Can I just transfer all those programs and files from the old one and reformat it to free space or is there a way to just remove the operation system and still access the the files and programs?
View 1 Replies
View Related
Mar 29, 2012
I was loading up my computer I noticed it was loading EXTREMELY slow today. Slower than usual when its start to desktop speed is usually 20 seconds. Steam was downloading something, and I tried opening up Chrome as well, with Skype too. My computer usually runs all of these fine on startup as well. My computer also ended up freezing and I had to hard shut down my computer.
View 1 Replies
View Related
Dec 24, 2011
I have a virus infected sata hard drive with windows 7 on it. It has the win 7 anti virus 2012 on it, and it's a cybercriminal virus. I have lots of files I want to transfer to the new sata drive. I already have windows 7 installed on the new drive. How do I get the files from the bad drive to the new one?
View 4 Replies
View Related
Jan 21, 2013
I have a USB Webcam 6.1.7601.17514 from Microsoft installed on a Fujitsu Laptop (Windows 7 ) and I want to copy and install it on another Fujitsu laptop (Windows 7).The other laptop the camera is not working and there is no webcam driver installed.
View 1 Replies
View Related
May 22, 2010
Is there a way to make SFC use the Windows 7 DVD for files to be replaced instead of the files on the hard drive?
View 9 Replies
View Related
Jan 12, 2013
My "C" drive is getting very full. It has my operating system and program files on it. My data is stored on an external hard drive. I would like to migrate my programs to another external hard drive to give more room on my "C" drive. How can I do this?
View 1 Replies
View Related
Jul 9, 2012
I did an image backup to move my programs from one hard drive to another, this worked fine. But when i re-sized the partition to give myself extra room in storage, programs stopped working from the ati graphics software to google chrome,etc. also i got the message that my system is low on RAM.
View 9 Replies
View Related
Aug 22, 2012
I have a 128b SSD with everything on it. I also have a blank 160gb hard drive that i would like to use for a lot of programs that won't benefit from SSD speed. However, when i try to take things like "Windows Portable Devices" or "Windows Sidebar" from the program files and paste it into the Hard drive, i get a message saying "you need permission to perform this action"
View 5 Replies
View Related
Nov 7, 2012
I just got a new comp, w/ win7. I just took the HD from my old comp, and added it 2 the new system, hoping that i could run some programs from it on the new comp, (because i've lost install cd's etc..) Everythings fine except, I cant run any of the programs. Like, Old drive has Microsoft Digital Media Edition. I tried to open it & run the install, but the new comp says.. cant access registry. New unit is win 7, old one was xp, sp2. anything i can do to use my old programs? can i copy the drive onto the win 7 hd?
View 2 Replies
View Related
Dec 1, 2011
Can I drop my old laptop's harddrive into a newer computer somehow and keep all my installed programs?
View 2 Replies
View Related
Jun 6, 2012
My laptop crashed and I just salvaged my hard drive from the computer. How can I transfer all my programs and files from my xp external hard drive to my new laptop which has window 7. The window 7 easy transfer utility program only allows the files to be transferred and not the programs
View 1 Replies
View Related
Oct 23, 2012
I'm about to get a 2 terabyte external hard drive and I would like to move all my user installed programs to it without uninstalling them and reinstalling to the new drive. My question is....1. Is it safe to drag and drop the program files from C: to the new drive, and 2. If it's not a good idea to perform a drag and drop is there another option?
View 4 Replies
View Related
Oct 6, 2011
I am attempting to help my friend. Has old laptop, been making system image backups with Macrium Free on external usb WD Hardrive. Now wishes to get new laptop and transfer pertinent data and programs to the new computer. I haven't a clue. He had not installed the HD programming, using macrium instead.
View 4 Replies
View Related
Jun 26, 2012
I currently have an HP Pavillion G70 that has some broken hardware (hinges for screen) but other wise works fine. It's running Windows 7, Ultimate - 32 bit.
I'd like to buy a used version of the same PC model and simply swap the hard drive from mine into the purchased PC.
Will this retain all the programs, settings and files? Or are there some things that are tied to the motherboard or other hardware devices.
View 1 Replies
View Related
Nov 21, 2011
After getting rid of windows 7 hard drive failure virus my start menu programs are empty.
View 2 Replies
View Related
Feb 26, 2011
my wife broke our laptop, i had all of my music on that hard drive and hadnt yet backed it up. the hard drive is still good, so i bought an external hard drive enclosure and put the old hard drive in it. i hooked it up, but am not able to get to any of my files off of it. computer recognizes it is there, shows folders, but wont/cant read files. wont open itunes or any other programs i had on it.the old drive was in windows vista, new computer is windows 7. does that matter?what do i need to do?
View 3 Replies
View Related
Feb 23, 2012
I am using Windows 7 OS. I had two logical partitions, E & F. I saw an unallocated free space on my disk. I tried to to mount unallocated drive to another
logical drive , it asked for the folder,where I wanted to mount I gave one folder in E drive. it asked if i want to format...i said
no. and thats all,process completed! And just then I saw there was no other logical drive left...neither E nor F. Now I can see only C drive and nothing else. how to recover my hard drive and the files now?
View 2 Replies
View Related
Feb 9, 2012
I know there is a command in dos that you could you use to list all files on a hard drive
View 3 Replies
View Related
May 28, 2011
I am a salesman in a tech department of an office supply store, and I had a customer issue stump me today. She had an external drive with lots of files on it she wanted to access. I took the drive, plugged it into a Windows 7 machine (HP quad), and all of the files appeared, no problem. But, then I plugged the seagate drive into her new Toshiba laptop (also Win 7), and only some of the files appeared. Missing were all photo files, and many other types. I could not figure out why some were missing and some showing. I took the drive to a third computer with Win 7, an MSI all-in-one, and behold: files were missing. Now it seemed almost arbitrary. Could it be a matter of some Windows updates not yet installed? Why would the exact same drive work differently on three different computers in regard which files were seen and accessible? None were "hidden" files.
View 3 Replies
View Related
Dec 10, 2009
I just bought a new computer, i7 860 and have put 7 x64 on it.
my motherboard is ausus p7p55d and has one ide socket on the board.
I was using this socket for my cd and dvd drives but I have detached them so I can plug in my old IDE hard drive.
I was using the IDE drive just 2 days ago in my old system.
Sometimes when I boot up the drive is seen and sometimes not.
when the drive is seen I try and copy some files over to my new sata drive I have in the new system. some of the files copy over but the the IDE drive always gets stuck. when I try to cancel the copy windows stops responding partially and I cant get out of the copy window and the old IDE hard drive explorer window.
So I restart windows and normally it now doesn't see the IDE drive.
What is going wrong?
How do I get my files off this hard drive?
View 9 Replies
View Related
Jul 20, 2011
why when i try to burn my music files to a cd it tells me the file is not located on my hard drive or anywhere else
View 1 Replies
View Related
Aug 11, 2012
I can see a generic storage device listed under the universal serial bus controllers in the device manager and am able to see the 'safely remove hardware' icon in my tray. Unfortunately, the only thing that I see in disk management is an 'unknown' disk. The hard drive is listed by manufacturer in the device manager; however, I am not able to open it from this site. And, when I look at the items 'attached' to my computer, the drive is not visible.
View 4 Replies
View Related
Feb 15, 2012
its been a long time since i last posted about my bsod and after i fixed them i began to get more of these. the only way i can replicate the problem is when i move or copy+paste files in the computer, mostly if it is from my computer to a external hardrive or usb... i attached the latest minidump file i got 021412-15958-01.zip
Edit: Go another bsod... if it helps i uploaded the minidump from that crash 021512-21153-01.zip
View 9 Replies
View Related
Jul 10, 2011
how to copy files to an external hard drive( photos and music0 there dosent seem to be a "copy to " option on windows 7
View 3 Replies
View Related
Apr 23, 2012
I've had this laptop for a few months now and I got another hard drive called Data which is empty, my other hard drive called OS is where everything goes and I wondered if I can move games and other files to my Data hard drive without corrupting them. And if possible can I move a file called Program Files to my Data hard drive without causing any problems. My pc takes a long time to restart which I guess my OS decides. My OS got is 80gb of 238GB and my Data is 332gb big, with no files in it.
View 9 Replies
View Related
Nov 23, 2011
It occured when i tried to open internet explorer while google chrome was downloading a file. However, I have always been able to do this when I attempted it previously, so I am not sure what made this time different, but after i clicked on internet explorer, everything i had open got immediately closed, my screen flashed black, and when it was back at my desktop, all my icons were gone aside from Recycling bin, Microsoft Word, and Powerpoint, and like 50 little message windows opened one after the other saying that files may have been lost because of damage done to the C drive. I cannot preform a system restore because it says there are no previous restore points, and all of my files (documents, pictures, downloads, music, programs) are no longer on my computer for some reason? Is this just a problem with my C drive that can be fixed and restored? Or are all of my files gone for good? Also, my PCtools Spy Doctor ran a scan and said: Adware.BHO.GEN (20 Infections) - High Threat.
View 11 Replies
View Related
Jan 10, 2012
I consider myself relatively computer savvy, and I even talked to my IT-professional soon-to-be brother-in-law... but now I turn to you, BleepingComputer. I really need help here.Short Version:I keep all of my personal files on an external hard drive. That 1TB hard drive was getting full, so I bought a new 2.5TB hard drive. I start working from the files on the new drive. After about 30 seconds or so, folders just show as 0 bytes and "There are no files in this folder". The hard drive works on other computers (HP laptop) but not my Dell desktop. This has happened (sort of) with three different, brand new external hard drives. What would cause this?Super Long VersionI'm running a Dell Precision T5400 workstation with Windows 7 64Bit Home Premium. I keep two 1TB redundant drives at all times, synced monthly via SyncToy. The 1TB drives were filling up so I bought two 2TB Seagate external drives. And then this string of events happened:
1) Copied all of the data from the 1TB to a 2TB SEAGATE drive.
2) SyncToy'ed them to ensure that all of the data was definitely there.
3) Retired the old 1TB drive.
4) Began to duplicate the 2TB drive to the other 2TB drive.
5) In the middle of copying, I received the error, (something like) "Cannot copy files as the source file no longer exists".
6) Checked Disk Manager, and the 2TB drive shows up as RAW format now?! It was originally NTFS. Search Seagate forums and you'll find that this is a common problem.
7) Restart. Same problem. The other 2TB SEAGATE drive now has "USB device not recognized" errors.
8) Try restarting, copying over and over. Same results.
9) Plug both drives into my work laptop (Mac Bootcamp Windows 7 64bit). Both show up as "Drive needs to be formatted to proceed".
10) I format both of them and perform check disks on my Mac Laptop.
11) They're fine. Then I plug them into my Dell Desktop.
12) I run SeaTools on them. One has an error and can be RMA'd. The other is "USB device not recognized".I RMA them both and mail them in.At this point, I hate Seagate because they seemingly sold me two faulty 2TB drives.
13) I buy two new 2.5TB Western Digital Hard drives.(expensive. btw).
14) I un-retire my old 1TB drive and plug it into my Mac Bootcamp laptop. Disk has errors. Run the recovery tool. All seems well.
15) I copy my 1TB to one of the 2.5TB WD drives on my HP laptop (it's super old, and I had to go to work with my Mac)
16) I plug in the new 2.5TB drive to the Dell Desktop, and some of the folders show up empty?!?
17) Plug that drive back into the old HP Laptop all of the files show up.At this point, I'm super confused. There's clearly something wrong with my desktop?
18) I perform the following while checking the disk in between each new trial: system restore, uninstall USB drivers/host controllers, start in safe mode. Nothing works. Same problem. Folders show as empty.
19) Plug the drive back into the HP laptop. Files are there.
20) Re-install BIOS on the desktop. Folders show as empty.
21) Run Malwarebytes, HiJackThis... nothing out of the ordinary.
22) The computer doesn't fully start up when the 2.5TB WD drive is plugged in.
23) I run startup recovery. It spits out a bunch of errors. Fixes some, some not.
24) Folders show as empty.
View 13 Replies
View Related
Feb 13, 2012
At the moment, my Gateway M-Series laptop which has Windows 7 32bit will not do a system restore! It says my local disc ( C: ) has errors, it cannot check these errors so that I can restore the computer
My computer doesn't want to connect to the Internet also (lucky for me I have other means of accessing the Internet) and every time I open Chrome or any of my software it says there are corrupted files and the disk check will not run because there are corrupted program files? I haven't downloaded anything of late I keep a fairly clean hard drive, but when I went into system restore it set one of the restore points as 'DirectX Installed' which incidentally I haven't installed and isn't in any programs list.
After some tweaking I found I was able to check the disk and restore the computer but I would still like to know if any of you have any input on how to avoid future problems!!
View 2 Replies
View Related
Mar 19, 2012
I decided to built a new custom made computer and would like to know if I can just attached the old sata hard drive to the new motherboard?I read that I have to have the same motherboard for the hard drive to work or else it will reformat the hard drive, is this true?
View 2 Replies
View Related
Oct 19, 2011
I am using windows 7 ultimate.Today I booted the computer and it went to a message that said preparing desktop. After windows loaded the normal software was present, but my customized links were gone and the default background was present. My files that were in my normal user folders were not present, but were later located in the users/username folder. I moved some of these folders to the desktop as that is where they had previously done. In the users folder there were 3 folders (public, my username and whatever the new default user was called). When I restarted the computer everything came back to normal, except the folders of files I had placed on the new desktop. I went into the user folder, but it only had my current user and the public folders.How do I recover the files from the desktop from the random corrupted profile that windows created which I can not manually log into? I searched for the files and the last record of them is linked to my user and says the shortcut is not valid.
View 4 Replies
View Related
