Monitor Cleaning
Dec 1, 2009Many of todays PC users have flat screen monitors eg (LCD) keeping in mind some have a coated screen and need special cleaning what do you use to clean your monitor ? and how do you use it ?
View 7 RepliesMany of todays PC users have flat screen monitors eg (LCD) keeping in mind some have a coated screen and need special cleaning what do you use to clean your monitor ? and how do you use it ?
View 7 RepliesI recently upgraded my motherboard and CPU and attached my existing hard drive. Windows 7 detected all of the new hardware and is running beautifully, but I just want to clean up remnants of old drivers for peace of mind. I already enabled Device Manager to show hidden devices and deleted the unused ones. The boot log, however, still shows a handful of unloaded drivers. I listed a few below.The NVIDIA GeForce GTX 275, for example, is no longer present. It doesn't appear in Device Manager, so where else might it be referenced?
Did not load driver @battery.inf,%*compbatt.devicedesc%;Microsoft Composite Battery
Did not load driver @battery.inf,%hid_device_battery.devicedesc%;HID UPS Battery
Did not load driver @cpu.inf,%intelppm.devicedesc%;Intel Processor
Did not load driver @hal.inf,%acpi_amd64.devicedesc%;ACPI x64-based PC
Did not load driver @oem1.inf,%xfi.devicedesc%;Creative X-Fi Audio Processor (WDM)
Did not load driver @oem46.inf,%nvidia_dev.05e6.01%;NVIDIA GeForce GTX 275
I have Windows 7 and over 1,600 emails, half of which I don't need. How do I do a bulk delete of addresses versus doing them one by one?
View 3 Replies View RelatedI recently went through quite a scare with trojans and tracking cookies and google redirects and other things. Through the course of all this I examined my system logs and found some to be seemingly cumbersome. My laptop is about 2 years old and none of the files have been managed, just appended or overwritten. My question is how important is it now that my system has been cleaned and I don't seem to be having issues, should I delete these files and start with a...'clean' slate. state? whatever.
View 1 Replies View RelatedI recently got an Asus G74 (great for gaming, by the way) after my old laptop died.the only thing I don't like is how my fingerprints show up on the matte (ruberized plastic) finish on some of the computer. how to legitamately clean it? And is it safe to lightly wipe it down with water? Or how about windex?
View 3 Replies View RelatedI got a second-hand PC with windows 7. I deleted the previous owner's accounts and created new ones called Owner (regular) and Owner-admin (admin access). Since then everything is messed up..The previous owner account still had files in /users/[account name]/ after I deleted the account. I deleted those and they were mostly gone, but some are protected or are recreated on reboot. Even though I always log in as Owner, downloaded files often en up in the previous owner's "My documents/downloads". When I try to copy them into my new "My documents/downloads", I don't have write permission. I can't write into my own user account directories...? I thought I'd recreate the previous owner's account and try to undo it from the inside out, but ended up with a Owner.Carl-VAIO.Carl-VAIO' as well as aOwner.Carl-VAIO' account. I tried to install Thunderbird, but it is so confused about what is what that it won't install. I can't blame it.
After it was already too late I discovered that my computer thinks it is part of a workgroup. I tried to reset this (it's a standalone), but I couldn't - the button remained greyed out no matter what. Not sure if that has anything to do with the problem.What can I do, other than re-install the OS with an installation CD I don't have?
i want to clean up my pc, specifically, reduce my CPU and RAM usage. After some research on fixing my lag issues, i came to the conclusion that i need more personalized help. Sorry if i seem like a lazy git who wants everyone to do the work, but i dnt trust myself to do the job right and not screw up pc to the point of no return. I am no techie, but i know enough to know that my pc needs help. [code] and here's some screenshots of my pc's processes and other stuff from task manager. yeah, sorry for the massive size, i just wanted it all in one file.i knw there some really stupid processes in there, but i have little idea on how to make them not turn on at start up.
View 1 Replies View RelatedI've always cleaned the Thumbnail Cache using CCleaner but after doing some reading I'm a little unclear as to the benefit.
As I understand it if I clean the TC, each time I open a folder it will need to rebuild the thumbnails. I believe this slows things down. Is there a benefit to not cleaning or does the cache keep growing and using up more space?
There is a temp folder in c:users****appdatalocal and it is full of stuff. How does this not get cleaned up when I empty firefox/IE cache?
View 1 Replies View RelatedWhat I currently use is CCleaner & Advanced System Care. I guess what I'm asking, is there anything that is more on a professional grade? A power scrubber that small businesses would use? I want to clear out unneeded registry files, left over install files, left over stuff from programs I have uninstalled, just ...my technical term is "crap" left on the operating system hard drive. I am using Windows 7 Ultimate x64.
View 9 Replies View RelatedSeeing as I was having a few problems with recently installed software, I decided to run a system restore, only to find that all of the restore points but one had disappeared (including those I had deliberately created in the past for emergencies). From what I've been reading on the internet, the disappearance of restore points with Windows 7 is a relatively common occurrence, and some forum members have suggested that disc cleaning software like CCleaner and Advanced SystemCare 4 could be responsible.
View 1 Replies View Relatedi cleaned my machine of anti virus and it cannot just hook up to the internet again
View 1 Replies View RelatedThe printer's ink pads are at the end of their service life. so what can i do?
View 2 Replies View RelatedI woke up this morning to find my computer was frozen. So I forced it to restart by holding down the power button. Once it was booting back up I walked away from my pc for an hour and when I came back it just has a message saying "Cleaning up... Do not turn off your computer." It has been like this for over 4 hours.What causes my pc to go through this cleaning up phase and how long does it take?Also is it safe to restart my pc at any point if this takes way to long?
View 9 Replies View RelatedI have a three monitor set up. Whenever I open up a browser, either internet explorer or google chrome on monitors 2 and 3, after a few seconds it automatically drags my browser into my main monitor(monitor 1, where my start button and status bar is located)
View 3 Replies View RelatedI have a setup with 6 monitors. Today my main monitor broke and I couldn't find a way to shut the PC down since I couldn't access the main desktop to get to the Start menu.Is there a way to change which monitor is the main monitor without having access to the current main monitor?
View 5 Replies View RelatedI am running a dual monitor setup with my TV hooked up via HDMI to my laptop.
Everything was working fine before, I always had the laptop as my main display yet I could play a video or a game fullscreen on the TV.
Since a couple of days, as soon as I put something in fullscreen, it immediately goes on my laptop, regardless if it's open on my TV or my laptop. I don't remember changing/installing anything that could've changed that...
I checked a bit in the AMD vision software and the Windows control pannel but I can't seem to solve my problem without switching my TV as the main display. I also made a quick search on google as well as here but the problems were mainly with Flash, which isn't in cause here.
Here are my system specs:
Toshiba Satellite L75D
Windows 7 home premium 64-bit
AMD Radeon 6520G
I have just did a clean install of Windows 7 ultimate from XP and I am unable to get my dual monitors to work like they did in XP.
I have a DVI Radeon graphics card plugged into the agp slot, and a Nvidia geforce vga adapter plugged into a pci slot of my dell optiplex 755. When I am in the screen resolution settings the second monitor cannot be detected.
In bios I have 2 options under primary video adapter and they are auto, and onboard card. When set to auto the Nvidia card gets a signal but the Radeon does not. There are no conflicts in the device manager, and all of the drivers are up to date.
When I change the bios option to onboard card the Radeon adapter gets a signal but the other monitor cannot be detected and in device manager there is a yellow exclamation mark next to Standard VGA adapter and a code 10 error that states the device could not be started.
I have powered down, and unplugged every cable, I also tried to use the integrated VGA adapter to the Intel G31/G33/Q33/Q35 Graphics Controller but the computer will not even boot. I get
"System Halted
Attention Unsupported Video Configuration Detected"
I have two monitors, both work fine as standalone but Windows will not detect either as a secondary.
Please help me someone, I am so used to having my helpdesk email open in one monitor and all of my other work in the other monitor.
This computer is running an ATI Radeon HD 2400 Pro. It does support dual monitors...(I've had dual monitors active on this card before, but never on Windows 7.) But since installing windows 7, I can't even get it to detect the second monitor. I want to run the setup with the CRT as the primary monitor and the HD as the secondary.
View 7 Replies View RelatedI recently had an older HP Pavilion Media Center m7760n Desktop PC rebuilt. The old power supply fried the motherboard so I need to get a new power supply and motherboard. Here are my current specs.
Mainboard : Asus P5QPL-VM EPU
Chipset : Intel G41
Processor : Intel Core 2 Duo E6420 @ 2133 MHz
Physical Memory : 2048 MB (2 x 1024 DDR2-SDRAM )
Video Card : Intel(R) G41 Express Chipset (Microsoft Corporation - WDDM 1.1)
Hard Disk : WDC (1000 GB)
[code]....
As you can see from above, the "video card" is actually integrated into the motherboard.The computer works perfectly except for one major problem. I have 2 monitors, one is 22" with 1680 x 1050 resolution and the other is a 15" monitor with 1024 x 768 resolution. At the back of my computer I have a VGA port and a DVI port. The 15" is connected to the VGA port and the 22" is connected to the DVI port.When first starting the computer, the 15" monitor was recognized as the primary monitor while the 22" was recognized as the secondary monitor. No problem. I simply went to the display settings and set the 22" to be the primary monitor and the 15" to be the secondary monitor. Unfortunately, this setting seems to reset as soon as I reboot the computer. The 15" is always set as the primary monitor on start up, forcing me to set the proper settings all over again. What's worse is that even after I have set the proper settings, they sometimes revert back when using Media Center or other programs. Worse yet, sometimes the monitors both go completely black ... as if the monitor settings were about to switch but got locked up some how.I'm assuming that perhaps the on board video has a primary port (VGA) and a secondary port (DVI) but even still, shouldn't Windows 7 be able to over-ride this and save these settings so that the monitor settings remain the same during startup and regular usage?
I'm using a television (32p) as a second monitor in extended mode so that I can watch a movie in the TV and play a game in the monitor (this was my main goal). Monitor and TV lays in two different ambients, both connected to the same pc, one by normal VGA cable and the other by HDMI. I managed to differentiate the audio output so that VLC player sends it's audio to the HDMI (so that only the TV plays it) and the rest of system sounds, media players and games outputs to the speakers (basically only the VLC audio is directed to another output device). I reached my goal so that I can watch a movie fullscreen in the TV and play a game in the monitor fullscreen too without any interference from one another (nor audio or video).
The thing is, because I have the TV in another ambient I can't actually see what's going on in it, as I just "throw" the VLC window to the TV from my main monitor. And here's the question: There's a way to see the TV's desktop in my monitor? Without having to set it as main monitor so to not really switch between desktops.. The perfect thing would be if I could see the TV's desktop in a window like in remote desktops applications.
I have AT&T DSL and it just drops out, I have a 2 wire router and the DSL and Internet lights will flash red when it drops, I have had this problem for almost a year and AT&T will run a useless test and tell me everything is fine. I have searched for 3 days trying to find a Broad Band Monitor to let me know when it drops and for how long, also how many times while I am at work, or just not on the PC.
View 2 Replies View Relatedi just got a dell optiplex 755 running windows 7 and i tried hooking it up to my tv to use as a monitor and it starts up and goes through untill it says starting windows (where its supposed to take me to log in screen) and then my tv just says not support but if i start in safe mode it goes through i just dont understand why it doesnt work i even tried lowering the resolution then hooked it up again and same thing its driving me crazy why it wont work i have a 32" HCT tv
oh also im using VGA to hook up since computer doesnt have hdmi out
Computer was slow and seemed to have too many things running all the time, freezing, etc. I ran Malwarebytes and Webroot Secure Anywhere; they didn't find any problems.So restored it to a week earlier then everything ran just fine for a few days. Now it seems to be doing it again. I went to Task Manager and found several items I can not clearly identify after searching online for them:Monitor.exe *32?
View 3 Replies View RelatedThis may seem like an elementary question, but is it possible to run 2 PC's on 1 monitor (seperately of course)? If so, how would it be done since there is only one hookup to the monitor? Some sort of splitter?
View 2 Replies View RelatedI just d/led windows 7 RC and im having problems connecting to my 2nd monitor, the screen on my laptop is working just fine.
i have a HP - Pavilion Laptop with AMD Turion™ X2 RM-75 Dual-Core Mobile Processor with NVIDIA GeForce 8200M graphics
my monitor is a Samsung t240 HD
In device manager
Monitor is showing - Generic Non-Pnp Monitor
Display is showing Standard VGA Graphics Adapter
im not experienced with this kind of stuff at all.
Im using my gtx on my samsung led monitor And some times I use it on my 32'' led as htpc or sometimes play games on it My question is will the card heat up from this setting ? I only use one monitor and other one is turned off but the cables remain plugged
View 1 Replies View RelatedAs the topic suggests, which one is better? LCD TV or LCD monitor?
Also, why in the world do LCD TV's have a lifespan in hours (ex 60,000 hours) associated with them?
What would happen after the lifespan expires?
Sorry if these are n00by questions but considering I am just now gonna shift to LCD monitor from my 2002 15" CRT, yeah I'm a certified n00b!
I use my TV as my desktop through an HDMI cable from TV to my Tower but because of lag is there any better way to set it up i've tried VGA that didn't make a difference so please could k of lag i know it's the tv as i tried laptop to tv would there be any settings on tv to stop this?
View 4 Replies View RelatedYou have multiple monitors and even a TV hooked up to you PC.
Again if your like me you hate that MC locks the mouse so that you cant use your PC while MC has the floor.
Well Not Anymore...
I have found the best and most important tool I have for MC
and its called The Maxifer and yes its FREE
It will launch MC to what ever screen you choose Full Screen with out the Lock Down.
So you will be able to use you PC and run MC full Screen!
It just runs in the taskbar and with a Rt Click will make all your dreams come true!
whei i open my computer i cant see anything in monitor.what can i do?
View 1 Replies View Related