have a quad boot setup(all on seperate drives),just recently my drive selection at boot up is missing two of my drives,when i select either one of the two options i recieve an error message (0xc000000e),but if i put in my win 7 install disc & reboot & ignore the "press any key to continue"my machine then gives me my full 4 boot choices.Ive uninstalled virtual pc 2007 & my new dvd burner as they were the only new installs ive done before this error occured,tried startup repair from win 7 disc & system restore no luck.
I'm having an issue installing Windows 7 (7100) 64 bit. (I have also tried 32 bit and 32 bit v7000) #Note, I burned the disk to a TDK-R 4.7gig Dvd using imgBurn at x2 write speed and verify. I also use the disk to install a guest os in vm workstation. So I know the disk is fine.
The install fails shortly after clicking "Install Now"
At first I get a cd/dvd driver device error or w/e. I load the drivers for my dvd drive. All goes well.
Then I get to the area I would normally select the install drive/reformat section. Instead of seeing C: & D: as usual the list is completely blank.
This is where I'm stuck and I have no clue how to fix it.
Initially i had a local disk of C:, D:, E:, F:, Now i have only C: My local drives are missing.I dont Know how to fix it. When i tried to fix in desk management there also no local drives were present.
Before the problem i downloaded win2flash software for making bootable usb drive.After installing,in the middle of operation i got a blue screen then in the boot screen i got a message that BOOT MANAGER FAILED .I fixed that problem.
I have upgraded to Windows 7 Ultimate, since then I have not had the CD drives showing in windows explorer in the drop down section on the left. If I put a disc in it then shows up. I am used to XP and all my drives showing.I looked at the properties for the drives and there is the message showing, Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19) instead of "this device is working properly".
I purchased a vizio all in one desktop model CA24-A2 , with windows 7 installed. I upgraded it to windows 8, but decided to return back to windows 7 because the Metro UI always crashes on me. I purchased a windows 7 disc and booted the computer off the disc. When the installation asks which drive to install it to, nothing appears. For some reason, the installation disc is not reading the drives. I've checked vizio's page, but didn't find any drivers for the hard drive that would work. I check the Bios menu and both drives appear. I've read on other forum about changing the bios mode (AHCI,IDE), but my bios menu is very restricted, and i dont have that option available. I used MiniTool Partition wizard on a bootable cd, and it was able to see my hard drives as well. I added some pictures below. When i try to boot windows with windows 8, "bootmgr is missing" error appears. After restarting my computer several times it seems i only have access to the bios menu f2, and not f8 for recovery.
2 of my DVDRW Drives aren't showing in Windows Explorer, or working. 1 is an IDE drive. The other is Sata drive this happened when I either uninstalled some programs or some type of hardware, or after some software drivers were downloaded, what could have caused this?
ack when I first set up my system I used a tutorial on this forum that showed how to install the OS on one drive and everything else on the other. The setup required changing the registry settings in audit mode during the initial OS install. I am looking for this tutorial but now can't find it. I even posted in this post, but even those are missing so I can't just trace my posts. I'm confused as to why it is missing and am hoping anybody could lead me back to it.
I have a hp dv 6000 i was trying to dual boot my pc with win 7 and xp pro, with win 7 installed first. in order to install xp i had to disable my sata native. I can dual boot but on my xp its seem I'm missing alot of drives. I have no internet or sound,
I have a brand new Sony SVT13112FXS - hard drive is a hybrid of 500 GB HDD and 32 GB SDD.I was attempting to reformat it to get all of the anti-virus stuff off, except when I tried to reformat no disks were shown in the reformat tool. It asked for drivers, so I assumed I'd need to install the SATA/chipset drivers. I downloaded them from the Sony website but it wouldn't allow me to install them (from a flash drive). Specifically the error is "No drives were found. Click load driver to provide a mass storage driver for installation."In my troubleshooting I (stupidly) marked the wrong partition as active and got the dreaded "bootmgr is missing" upon restart. I attempted to repair using the windows 7 disk as a recovery tool and selected "startup repair" 3 times, but it still does not work.I am able to get into command prompt and I am assuming I can inactivate the (wrong) active partition there. However, when I go into DISKPART and type "list disk", all that shows up is my flash drive that I am attempting to install windows from - the computers hard drive does NOT show up here.I will also happily completely reformat instead of repairing, but I cannot do that since I can't get the disks to show up in the reformat tool.
I just finished putting together my computer, installed Windows 7 Pro 64 bits. However, both of my hard drives (one SSD, one regular HDD) are showing up as external drives (plug-and-play). If I click the "Safely Remove Hardware" icon, I could actually "eject" both of my hard drives.
I just got a computer for free, a Dell Studio 1555. When I got it, it would try to boot, then come to a screen that said that bootmgr.exe was missing. Sometimes I got a message that said something like mpio.sys was corrupted or missing. I have a Win 7 disk, so I put it in and tried to repair the installation. Each time I ran it, it said that the repair had failed. I tried to reinstall windows 7, and It made it to the first restart in the process. It showed the "Starting Windows" screen, but the colors of the windows logo never appeared, then I got the missing bootmgr screen. I decided to install Ubuntu and see if that worked, and it did (I installed it alongside the Windows installation). It was Ubuntu 10.04. I thought, "OK, so i'll just use this as a Linux machine"...and I decided to go back and reinstall so that I could use the entire hard drive. It never worked correctly again. Each subsequent time that I installed Ubuntu, I was told something along the lines of "Gnome Power Manager did not install correctly" and got a slow and choppy Ubuntu installation.Tried to install 11.10, and it failed completely. I opened the Ubuntu live from my usb drive, and opened the disk utility. I now cannot format, reformat, partition, or delete partitions on the drive. Is all of this just a case of a hard drive on its last legs, or is there something else going on here?
am trying to do a backup of my Win 7 system drive (C, but the backup utility is saying that it must backup by non-system drives (E: and H, which happen to have "System Volume Information" folders on them. They are not system drives. E: is my main utilities drive and H: is my games drive.Somehow, Windows thinks they are system drives, when in reality they aren't.Any ideas on how to change them? When I go in to Disk Management, they are not showing as system drives. They are all partitions on the same hard drive, but there are other partitions not included in the backup.
Ok i have windows 7, Recently i have found out that i have a full list of errors that happened pretty much overnight:Here's the list 1. I can't go onto Control Panel It say's " This operation has been canceled due to restrictions in effect on this computer. Please contact your system administrator" I AM THE ADMIN.. I am the only account too. 2. My Task bar is missing, When i go ctrl-alt-del i see no option to open up my task bar. [FIXED] 3. I cant RIGHT click on anything on my desktop, as well as my folders and stuff. Although i can right click while playing games or browsing the internet, so my mouse is definitely not broken. So u must be thinking, this guy has a virus for sure... Well if i do have a virus it must be made by ******* Bill Gates. Because i can't find it.I have the FULL version of Trend Micro Cillin as well as Norton 360, I've just recently downloaded Malvare Bytes, and that couldn't find anything as well. I've done a full system scam on both anti-virus programs, i see no viruses. I did get a virus a week ago, but Norton quickly picked it up, I'm thinking it may have changed a few settings in my computer before i managed to delete it.
My setup had an MBR issue a few days ago after installing Skyrim. I was unable to repair it using the windows 7 instal disc. I tried the automatic fix as well as bootrec.exe. After giving up and reinstalling a fresh windows 7, my rig has not been starting up properly. It insists on waking up from sleepwhen it was shutdown, i.e. Not sleeping. Well after a few days of this with no other problems, bootmgr can't be found again. Now, when I load the repair disc, it can't find my OS to even try a bootrec.exe on. But, when i go to load drivers the explorer window allows me to browse my c:/ drive and the installation is there. I would prefer to fix rather than reinstall due to a symantec DRM issue.
Windows 7 is on a 60 gb raid 0 setup (I know, i know, i deserve this for running raid 0)
I recently had Windows 7 installed and now I can not use the DVD or CD drives. I have checked and the drives are installed and ok. I am using 32 bit. Also, I have NOD32 and Ariva anti virus plus Malware.
I have installed windows 7 on a sata drive. I also have 2 IDE drives connected to the motherboard but I cant find either with Windows 7. There are no operating system on these drives just backed up files. When I disconnect the windowes 7 drive and reconnect my old drive with XP running on it, both the IDE drives are visible and working normally.
I have tried clicking refresh on the devise manager but the drives are not found. My floppy drive and dvd drive are visble and working properly. Anyone any ideas?
No drives were found.click Load Drivers to provide a MASS STORAGE DRIVER FOR INSTALLATION.Ok im helping a friend with their computer but have run into a brick wall where can i find a mass storage driver for a hp pavilion dv6-2150us Serial:cnfo146518Product: wa779ua#abarying to install windows 7 home premium 32bitut i get the following during setup No drives were found.click Load Drivers to provide a MASS STORAGE DRIVER FOR INSTALLATION
in 7 doesn't see any USB flash drives. Check in disk management - not showing up there either.AND........If I switch HDDs & revert to XP - same thing. No usb flash drives appear. And in control panel > disk management they do not appear as unassigned also.
Tech Support Guy System Info Utility version 1.0.0.2 OS Version: Processor: Processor Count: RAM: Graphics Card: Hard Drives: Motherboard: Antivirus: None
I have developed a problem where, when I use a SD-Card, Memory Stick or an external Hard Drive (USB connection) to my Computer running Windows 7, I am unable to add any files to either as I am told that the items are Right Protected. In the past I did not have this problem. I also have a similar problem when I try to run some other programs.
It appears that Microsoft has disabled the Autorun feature for USB devices in Windows 7. If you create an appropriate Autorun.inf file on your USB drive, Vista (and XP?) will happily run the program it points to when you plug the device in, but in Windows 7 that is no longer the case. I've read a few news articles explaining that this is by design, out of security concerns.
While I understand and even agree with the reasoning, I was wondering whether there was a way (perhaps in the Group Policy editor, or some Registry hack) to override or bypass this?
I have just created a nice autorun feature to enable me to mount a TrueCrypt-encrypted container on my USB stick, but that no longer works in Windows 7. (Can't use BitLocker as I still need uncrypted access to the root of the drive in order for BitLocker to allow Windows 7 to start on my fully encrypted C:-drive).
Quote: A new rumor has sprung up that suggests Microsoft is looking at a third alternative for sending out copies of Windows 7: USB drives. There are currently two known ways to move to Windows 7 without buying a new computer: via retail or via download.
The third solution would make it easy for users with netbooks without DVD drives, most of which are running Windows XP (as opposed to Vista), to upgrade to Windows 7.
Of course, installation from USB is much faster than from DVD, so such an option could end up being adopted by a larger demographic. USB drives are still more expensive than DVDs to mass manufacture, however, so I doubt Microsoft would be happy with that.
CNET quotes an undisclosed source in its speculative report: "Microsoft is considering offering Windows 7 on a thumb drive to allow netbook owners to more easily upgrade their machines." Microsoft confirmed in February that all editions of Windows 7 would run on netbooks but never disclosed how those who already own the low-end computers could get the operating system on their system.
The currently only known solution, downloading a copy and putting the installation on a USB drive, isn't a process many netbook users would be happy to do. If the USB drive option is skipped, most will likely have a friend or a tech support guy get the job done for them.
On another note, could this rumor somehow be related to StartKey, a Microsoft technology that was supposed to allow users to store entire Windows profiles and all their data on portable flash drives? Many criticized it in March 2008 but Microsoft has yet to acknowledge it, assuming it hasn't already been scrapped.
I have purchased a Sony Vaio laptop day before yesterday.I forgot to get the drive partitioned at the store and so decided to to it myself and i made a blunder.I wanted to allocate 60GB to C Drive and rest to the new Drive, but i allocated it the other way.But My when i open the My Computer, there is no partition as such although in Control panel it is being displayed as 50 GB free and upon right clicking I have an option to delete that 50 GB disk but i am not sure if upon deleting it whether i loose this space.Also my HD was 320 GB which now shows to be only 232 GB ( C DRIVE).Where have i lost this good amount of space?I have tried fragmenting but it executes in cycle reading % consolidation.Once it reaches 100 % it starts again from 1%.Thrice it happened and then i stopped the operation and did the restoration but i don't see any change.
I just installed a new Intel X-25 160GB SSD drive in my laptop, replacing my Vista WD Hard Drive, then installed Windows 7 Ultimate on it.
Everything went well, it seems pretty fast and all, however, I noticed that Windows still had the defrag scheduled, which I cancelled.
I was under the impression that Windows 7 was "SSD Aware" and would do things differently in the background when an SSD drive was installed. Is there something I have to do to tell the O/S that I'm using an SSD?
I'm trying to get rid of all of the CD drives that are showing up under "devices with removable storage." The go from CD Drive ( F: ) all the way to ( X: )...is there a way to get rid of these?
Looking to set up a Raid0 with 2 x 1 TB drives. Only problem is the drives are from 2 different companies. 1 is a HITACHI Deskstar 1TB 7200 RPM SATA 3.0gb/s, the other is SAMSUNG Spinpoint F3 HD103SJ 1TB 7200 RPM SATA 3.0Gb/s. Am i able still able to combine these 2 drives to make Raid0 array?
I have 2 windows 7 computers in my network and I have a Dlink DNS-323 mass storage devide. my wifes computer has no problem accessing the external hard drive. On my computer I have the red X on both drives in the DNS-323. If i try to access this drive from an application such as Itunes, it tells that the path is invalid or something close to that. I then have to go to Windows Explorer and double click on both drives.
I have noticed a large growth in the use of SSD drives instead of Hard Disk Drives due to the boost of speed and now wounder: Do SSD Drives become fragmented like Hard Disk Drives?
