I have 4 partitions as c,d,e,f. I have merged d,e,f using disk management tool from windows 7. Everything went fine till I merged three extended partitions to one. Now I can't delete the free space now. When I right click I can see New shrink volume and delete partition options but I can't delete my freespace. When I do so I got a message like can't delete partition an error occurs stating that not enough space available on disk to complete this operation". And I am not able to see my partition in my computer. Now I shutdown my system and started now it showing no partition found Grub error. I have linux in this but I didn't touch that partition. My model is sony viao VPCEB15FM. I tried with internal backup but no use.
This is a copy and paste of my problem.I haven't messed with ubuntu in a long while, because of this problem. what happened was i had ubuntu dual installed alongside my windows 7. I had grub as its main boot loader. I can't remember if i did the partitioning myself that time or not, pretty sure I did. However, for whatever reason, my grub loader failed once and it caused me to have to reset the mbr via a windows 7 disk. after I did this and ever since, the partitions I had set for ubuntu (a whopping 50gb) have been invisible to me. I KNOW they are there because my windows 7 says that my HDD says it is only like 418 in size. Clearly the memory is gone SOMEWHERE, but the partitions are not visible in either windows' partitioning tool, or when I load up a boot disk and use something like gparted.
So I am having a problem and I am hoping that someone can help. On my desktop I recently installed Win7 on a 1TB internal drive. I installed it on separate drive then I had my original WinXP32 installed. So I could test out Win7 before fully transferring over. Well it worked just fine for that last 2 months and I finally decided to get ride on my older WinXP32 OS and run Ubuntu 9.10 on that drive.
After installing Ubuntu on my old WinXP drive (that was the original drive on my PC) I no longer can run Win7 I just get this Error (Grub Error 17) when I try to boot my system, but I can still run Ubuntu. If there is anyone out there that could give me some advice on how to get my Win7 OS to run again I would love some advice.
I'm trying to install windows 7 home premium on my hubbys laptop. He had Linux Ubuntu on it, which he wanted wiped. I tried just installing windows7 over the top of it but it wouldn't work...so silly me thought I'd have a go at wiping it myself!
Now I can't do anything and all I get is the following error...
Nothing else comes up at all and I can't boot any disc at all
I've already installed windows7 ultimate on my own computer but I had my pc partitioned with ubuntu and windows and (with some help) was able to install over the top of everything with no problems. Don't know what on earth has gone wrong this time.
I just uninstalled ubuntu 10.10 and it worked fine but now when i rebooted I get an error saying:error: no such partition grub rescue> I know that you can fix this by using a windows 7 disk and booting from that but i don't have my windows 7 disk because it came on my computer.Is there any way I can fix this error without a windows 7 disk?
I had Backtrack and Windows 7 in separate partitions, i just deleted the partion of Backtrack in Windows 7 using diskmgmt. When i restarted the computer it is showing GRUB loading stage 1.5 error 17
I just recently returned from a trip out of town and found when I tried to boot my computer I had a Grub boot error 15, file not found. I've never heard of grub4dos before I began trying to figure out what was wrong with my computer and found that it is used for dual booting. I run windows 7 ultimate x64 and have never dual booted my machine. While my laptop itself is not password protected, I do require a password to get into windows.
get around the required password to install grub4dos, install linux, then copy my hard-drive, leaving it useless when they're done? If not, is there some other way, a virus or trojan, that could cause windows to fail and revert to grub? I did remove my hard-drive, put it into an external case and try to look at it on another computer. In the disk manager it shows that it's healthy, has 465gb avail and the format is RAW.
I have a Dell XPS 430 that came with Windows Vista and a Windows 7 upgrade disk. I set up my main hard drive with Windows 7 on one partition, Linux on another partition, and a third partition for storage. I recently needed more space for Windows, and no longer needed Linux, so using the Windows 7 disk manager I deleted the Linux partition and extended the Win partition using the newly unallocated space.
Upon restarting my machine, I am no longer able to boot into windows but instead am presented with the message: GRUB Loading, please wait... Error 22
I have a Windows 7 disk that I am using to access the repair utility, which I have run countless times. I have tried severel of the tutorials to rebuild BCD and FixMBR, etc etc. Frankly I am getting lost in all the commands and not even sure what does what anymore!
Everything worked fine till 1 hour ago or something like that. Then everytime i press the left button it will "left button-click" AND "right button-click" and it actually does the same with the right button.
I have tried to see if the settings have been messed up, but no. Everything is normal. I have tried changing the usage of each button - like changing the right button assignemt to do a "down arrow" instead of a "special click", but then it just does a "left button-click" and the "down arrow"...
I have tried uninstalling the driver, updating the driver, rebooting the computer, changing the settings, used windows recovery...
I really don't know what to do. When I plug in a USB mouse, that works fine. No problems there. It is just the touchpad buttons...
I accidentally merged the desktop folder and documents folder. (Not sure how). Nothing is missing. I just have no "desktop" folder under my user folder and all of the individual files from the documents folder are on the desktop. I'd rather not system restore.
i hav hp mini netbook and used to dual book ubuntu and windows 7, i shrinked some partitions to make swap partition for ubuntu., but after restarting netbook error shows" grub rescue no such partition" ,, after this i tested system memory and hard disk and get 100 % ok,, but when i use bootable flash drive to install Windows 7, the setup window is not loaded, only loading and loading..., what may cause this?
I'm trying to reload a windows xp sp3 system with 5 partitions. root partition (c:) has bcdedit.exe and store. z: is application store with bunch of batch scripts.A web application is hosted in Apache omcat on c:. One of the cgi script in web application calls a batch file on z: drive with following command.
BCDEDIT.exe /store c:ootcd ootsequence {UUID}
I'm getting following error
The boot configuration data tore could not be opened. A required privilege is not held by the client.
I do not see error, if command is run from command prompt with admin privilege. my web app is running under admin privileges.
One of my friends has a windows 7 computer with an account for himself, his mother and his 2 sisters. All the home directorys are stored in drive C. Partition D is shared. The question is, how to get a partition layout like this?
Partition 1: OS + programs Partition 2: home partition for himself Partition 3: home partition for his mother Partition 4: home partition for his sister Partition 5: home partition for his other sister Partition 6: shared partition for some photos.
I had windows 7 and i installed red hat linux by creating a partition.When ever i boot the linux is the default OS which will come up unless i dont select the windows 7 manually.Now i wanted to remove the Linux so i removed the partition from windows.After reboot i see GRUB.Can you let me know how to go ahead and boot the windows now.
I'm currently downloading it & spent the weekend creating a dual boot XP/Ubuntu. I don't want to mess up my system, so can I install 7 into a flash drive (usb)?
Other than that, if I created a new partition through gparted and booted from the 7 iso disk, would my GRUB notice this & respond?
i got a netbook recently with windows 7 installed, and found this free software "ubuntu" now am stuck with the "Grub" bootloader.
Does anyone know how i can remove this and return the netbook back to it's original state i've tried doing the Acer Recovery and it doesn't get rid of the Grub bootloader. Has anyone got any ideas??
I tried doing some things off the Linux website but i have no knowledge of linux at all it totally baffled me.
my problem is that now i have two operating systems:
1)XP Sp2
2)Linux Fedora
now my boot loader is GRUB and with that i select which of them start,the default is windows Xp, now i want to delete linux and just have windows xp and then install windows 7.
so i think i shoud first change bootloader and then install windows7,but i don't know how to do this this.can u plz help me?
another thing where can i see windows7 requirements,and the file system for installing it shoud be NTFS is it right?
at least how many GBs shoud i have for installing it?
i just got windows 7 so i wanted to get rid of linux ubuntu. after alot of trying i only got to this point. i installed windows 7 over linux to delete linux and the reformated my other hard drive so that nothing was left. but the linux grub loader is still there, windows 7 should have over written it but it didn't.
now when i start i get this message.
GRUB loading.
error: no such disk
grub rescue>
but if i leave my Windows 7 install disk in i can boot my Windows 7, but thats the only way.
does anyone know how i can get rid of that stupid grub loader and replace it with the windows 7 loader?
Ok so I have Windows 7 and Ubuntu desktop installed on my HDD. I used gparted and deleted my ubuntu partition and set it NTFS. But I forgot about the GRUB loader. Now when I boot up, I get the "error 22".
Anyways, how do I set it so I can just boot Windows 7?
Also! I'm on a netbook so it has to be a USB method.
I am running an ASUS U-47 laptop and am trying to access the system recovery options. However, when I try and access them, which I have done from both the recovery partition as well as a system repair disc, I am only directed to the restore to jfactory preset wizard, which offers me three options; restore windows to entire HD, just this partition, or 2 partitions. I am trying to access the bootsect.exe in order to remove grub, and as far as I can see, the only way to do that is through the command prompt in the system recovery environment.
I have a Samsung N120 Netbook that came with Windows XP. I tried to run Linux Mint as a 2nd operating system, but I kept getting errors and I became frustrated with it. Ever since then I have only used XP, but every time the computer starts up it goes into Grub and I have to choose to enter XP. Basically what I am looking to do is remove all traces of Mint and Grub and I suppose XP for that matter and upgrade to Windows 7. What is the best way to do that considering I have a netbook which does not have a CD/DVD drive?
I once used Auto Super Grub to try to fix a boot problem of mine. But it didn't work, so I just reformatted my computer. however, Auto Super Grub still shows up on my boot screen, so I have to choose between Windows 7 and Auto Super Grub even though Auto Super Grub was uninstalled a long time ago.Here are some pics of what I see.Through msconfig, I see one OSHowever, 7's default OS menu shows me bothThen bsdedit shows me 7 as a option, but also shows Auto Super Grub
I dual boot ubuntu/BTU bistro and win 7. They are all on different partitions. I had an extra partition for storage that I changed the file system so it could be read. Doing this I believe changed the order of my drives. Now on boot I get "unknown filesystem" grub rescue. I cannot load the bios or boot from cd.
I have new PC with Intel video card, W 7 HP. It's new ZT box from Costco with single video out connector. I watch TV on it and trying to set it so I can watch TV and have another desktop ready for my other computer stuff. Can it be done.I have option for single, extended destiop in my video settings. I did someting so I can get clean destkop on TV, but could not start my TV app on it.
My laptop with XP used the external monitor as extended workspace. W7 only uses the extra monitor and ignores the laptop's monitor. It is a old Acer and appears to run my W7 ultimate OK except for this limitation. Lotsa new ways to do old stuff - big learning curve.
I originally had windows 7 professional 64 bit on my laptop. I had a 10 Gb partition, which I divided in SWAP and / mount to install Ubuntu Linux. My computer now loads into Grub loader. All is well, its just now I want to get rid of Linux. (I will install it on desktop and mess around with it there.) I wanted to know how to get rid of the Grub loader.
I googled it and found that you can restore the windows (didn't find anything for windows 7) bootloader using the installation disk and going into repair. The instructions however were all for windows xp and few for vista. I want to know if it will work for Windows 7. I don't have a windows 7 DVD. I have a Windows 7 professional upgrade disk 64 bit. My Vista came pre loaded on the laptop, and i have recovery disks for it. Will I be able to do it from the Windows 7 upgrade disk.
So I recently installed win7 to my desktop which at the time had Ubuntu as the sole OS. I wanted all my stuff from Ubuntu after win7 install so I created an NTFS partition and moved all my crap there, wipe Ubuntu and did a clean install. So after I moved all my stuff from the NTFS patition to the win7 partition I ran gparted and erased the extra drive. What I was paying attention to was that win7 installed into an extended partition. Now when I try to boot I get a 'Disk failure boot, insert system disk and press enter'. So I thought ok easy enough, no luck it can't run the repair from install disk as it can't see the drive for some reason. is there any hope for my drive? Or should I clean install? No biggie if I have too, I can run Ubuntu live and move my crap if need be, just would rather not.
