this is one for the techie (if you dare (LOL)). When my computer boots, it automaticly tries to map to my external hard drive through my wifi. Of course it can't and it states can't do it. But after a few seconds/minutes I can go to computers, click on it (red X) and it brings it up for the rest of the time or until I reboot the computer.
View 7 RepliesI want to map drives on a Win 2k server box from the Win 7 box.
1) I cant see a way to match the workgroup name with the other machines on the network.
2) It sees the Win XP laptop but not the 2K server.
3) Suggest the help files be updated
In my new laptop, I have migrated to 7, but the majority of my data are still on my XP machine. I tired to used "Map Network Drive" from within the 7 to map the C: drive of the XP machine, but unsuccessful!some useful info, the the workgroup on both machines is the same WORKGROUP,in the "Netwok"/"My Network Places" of either machine, I cannot see the other,from 7, I can remotedesktop the XP machine with all local drives available, remotely.previously, I have mapped between XP machines with no problem, but Im wondering this time why it doest work. is it due to 7-XP incompatibility
View 3 Replies View RelatedI just installed windows 7 on my laptop and attached it to the domain. I then rebooted and logged in to the domain but unable to see all my drive mappings that I see on my XP or Vista systems. I am able to hard map my drives. Can anyone help?
View 3 Replies View RelatedTrying to map a windows 7 drive to xp via network switch and Ethernet. I've given the 7 machine a static IP of 10.10.10.10 and the xp machine 10.10.10.11.
From the xp machine: type 10.10.10.10 and get credentials box. Insert user name and password and it connects immediately and shows "users" folder...no problem. However, if I try 10.10.10.10C$ or any other drive and enter the same user name and password it changes the user name to "computer name""user name" and nothing happens. I CAN'T GET THIS TO WORK AFTER 6 DAYS!
from the 7 machine: type 10.10.10.11 and connects without credentials needed. type 10.10.10.11c$ and get credentials box. put user name and password and immediately have access to that drive with no problems.
No matter what I try I cannot get to any drives on the windows 7 machine from the xp machine and its driving me crazy. It also will not work if I'm logged in with the same user name and password on each machine at the same time.
Has anyone else had problems mapping the home drive through active directory in Windows7 ? we are running windows server 2003 for our domain controllers. This works flawlessly in windows xp stations, but i can't get it to work on windows 7 stations. I'm hoping i don't have to map the home drive through the login scripts.
View 1 Replies View RelatedI am having issuse with an XP-win 7 upgrade.
When I use WET utility it tries to install all my files onto my small C:drive. The original .mig file comes from a computer with C: J: K: drives... the new comp just has C: and D:.
Why isn't it giving me an option to map the drives when I upgrade?
It tries to install on C drive then gives up when it runs out of space.
When I look at the map drive tab in WET it says 'no drives are available for mapping.'
my employers IT support department has emailed me a certificate which allows me to access my office pc desktop using RDC without the need to establish a VPN to the server.can I now someone map one of the shared drives that is on the main office service again without the need to establish a VPN? perhaps using this "certificate"?
View 1 Replies View RelatedI have a big problem, I was using NetDrive to map my FTP Server to my computer for some time now. I was using Windows Vista 32-Bit, I just installed Windows 7 64-Bit. Now to a surprise I found out that NetDrive doesn't support 64-Bit Operating Systems as of this time. I have been searching no-stop for about 2 hours and haven't found much.
I found some posts that recommended another FREE program to use that is like NetDrive but they still doesn't support 64-Bit. I don't want to buy a $50.00 program like WebDrive for example. I have also tried to use windows explorer to connect to the FTP Server and doesn't seem to work well (mostly not at all). I don't know why?
So at this point I am asking everyone if someone knows of a FREE program or method that I can use to connect my FTP Server to a local drive on my computer?
We have a company drive that we map folders from to certain computers. They reconnected at log in like normal. However, we have a separate external drive that when I map a folder from it, it never reconnects on log in. I have set the folder permissions for the user I want. I have tried directly connecting with the folder share name and also using the IP address of the server. They will initially connect when you set it up at first, but then it never reconnects to the drive/folder when logging back on. I have tried almost everything I can find and it still never seems to connect.
View 2 Replies View RelatedThis makes no sense. I have always had 2 cpu's on a network. My main rig, and a "server". (Basically a storage and backup cpu). Well I just built a new rig, and installed Win 7 RC. Re formatted my old "main" rig to become my new "server". I still had the old "server" (Win XP) connected to the network, and had no problems mapping the drive to my Win 7 machine, and the new server with Win XP.
Now, I took the 320GB Storage drive out of the thrid CPU and installed it in the new "server" and tried to map the drive to my Win 7 Machine. I can not for the life of me get it to work. Both machines have the same user and p/w for login. WHAT GIVES?
I recently brought a Dlink DNS-320 and have searched the relevant forums for that product but all the solutions for resolving a 'map network drive error' have been unsuccessful.I have tried mapping the drive on this product using the IP address and I can ping the IP address for this device, the device also appears on my network via UPnP but I unfortunately I get a error message when trying to map the network drive the DNs-320 also came with a storage utility to map drives but that doesn't work either.I have gone through previous posts and tested this without my firewall on or changing the TCP/IP settings.
View 9 Replies View RelatedIs it just Libraries and Public and Personal sections? How are those different than mapping a new drive and setting permissions and/or passwords accordingly?
View 6 Replies View RelatedI have 2 computer's, my netbook and my main computer. I have these setup on the same network using LAN. I created a network drive on my main computer and would like to access it on my other computer but it always asks me for a password when i try to map the network on the computer that i am trying to share it to. I have not set any passwords on the computer that is hosting the network drive.
View 3 Replies View RelatedOur company uses an accounting program called Wisetracks which is built using the Borldand Database Engine.
We have installed this program under 32bit Windows XP as well as Windows 32bit Vista.
It will not install under Windows 7 64bit which we want to move to.
I have installed the program under Windows 7 XP Mode.
The problem is the following:
The Borland Database Engine administrator requires the database files which reside on our server as Drive F: to be mapped .
Under Windows 7 the mapped drive is shown as:
F on Win7PC and the Borland program does not recognize this.
How can I do drive mappings so that this works.
I have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.
View 3 Replies View RelatedI am trying to create some batch files to connect to network drives. I am not understanding something.ode: net use x: \myserverc$documents /USER:mydomainlogin_name the /USER:mydomain, what do you enter in the mydomain location of you are not part of a domain?
View 2 Replies View RelatedSo, I have a i7 2600K system with a solid state disk as the boot drive, and an older (c2008) Samsung Spinpoint F3 500GB drive as the data drive for programs (that I deem as not worthy of the quick load times). The hard drive has given me some errors over time, and I bought a hard disk to replace it (a Hitachi 1TB). The issue I'm having is that the fact that Windows 7 puts a small (100MB) partition on the F3, and for some reason, even though I'm running Acronis 2012, it doesn't seem to be able to clone the F3 over to the Hitachi. I've also tried Drive XML, and for my 2 hour wait, I only managed to acquire a boot error. Thankfully, I've not done anything rash to destroy the data on the F3, but given the fact that I've seen corrupted files in Steam from that drive, I'm not will to trust it long term with my data. I really need to get the data onto that Hitachi, though... Anyone have any advice for upgrading the HDD in a SSD/HDD system? I don't really feel like it should be so hard, especially if I've bought Acronis True Image, but maybe they haven't designed their product to handle this scenario quite yet?
View 9 Replies View RelatedI have a HP Touchsmart IQ500. Turning my computer PC on today, all I got was a blue HP invent screen with setup, boot menu, system recovery, and system diagnosis, and I could not get past it. I entered the BIOS and figured out that the hard drive was listed as "not installed." Pretty sure that is the main problem.I tried a system restore (with the Windows 7 install disc), but I guess the computer couldn't read the hard drive enough to enter safe mode (I tried restarting and F8ing several times). I put in an external hard drive, and the BIOS read it; however, windows does not allow you to partition an OS on a hard drive.
View 2 Replies View RelatedI have an internal hard disk not in use ,and I would like to make it as external disk !I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .So is there another way ? like usb -esata cable
View 3 Replies View RelatedMe and my brother built me a new computer from scratch (he did the building - i did the watching). I purchased an internal hard drive from Overclockers UK. It's a Samsung 1TB drive. I also have a 64 Solid-state drive in there as my primary hard drive that Windows was installed on and a couple of programs are installed on. My storage disk (the 1TB disk) is for all my music/films etc. Whenever I drag and drop a file into the Samsung hard-drive - it copies it rather than moves it instantly.When I had a laptop, I had 3 external hard drives and this is the way it copied files onto them.how I can get the internal drive to stop acting like an external drive?
View 6 Replies View RelatedI have a virus infected sata hard drive with windows 7 on it. It has the win 7 anti virus 2012 on it, and it's a cybercriminal virus. I have lots of files I want to transfer to the new sata drive. I already have windows 7 installed on the new drive. How do I get the files from the bad drive to the new one?
View 4 Replies View RelatedI have a USB Webcam 6.1.7601.17514 from Microsoft installed on a Fujitsu Laptop (Windows 7 ) and I want to copy and install it on another Fujitsu laptop (Windows 7).The other laptop the camera is not working and there is no webcam driver installed.
View 1 Replies View RelatedI have Vista installed on my Hard Drive, 250 GB.
But i recently purchased a 2nd Hard Drive, 500 GB, and i want to install Windows 7 on it.
Is that possible, to have both separately?
make a dualboot comp by adding windows XP to a new partition. I created the new partition with 20gb. (From the 500 of my actual harddrive)But before I actually installed on that, I got distracted with a second harddrive that my dad got(for no reason). It had a full copy of Windows XP backed up on it from another computer, so I figured I would just use that for the dualboot. I plugged it in (wired the same way as my old harddrive, but different data slot), restarted, checked the harddrive in explorer - all the data was there / reading correctly / etc, and I used 'easyBCD' to add the new harddrive to the boot list.(Which, of course, crashes if I try to start it. I just wanted to see what it would do). For a reason I can't remember, I unplugged the second harddrive for a bit, started the computer on accident (I don't know if anything loaded before I shut it off), and then when I plugged it back in.Windows 7 would not launch. It goes to a DOS-like window, except it's just a flashing _ and it never does anything even after a few minutes. XP didn't work still.. so I decided to reinstall XP (as I couldn't tell which harddrive was which on the list, I unplugged the main harddrive while installing onto the new).. and when I did this.. it formatted and installed fully... then restarted.. then restarted.. and restarted.. and just kept restarting, never showing any thing past the manufacturer logo/BIOS load-button-message-thing. So, I then try to use my 3-disk Windows7Recovery disk(burned myself with a program apparently included by the manufacturer.) It installed fully, appearing to work.. but when I launched it, it said "Invalid Partition Table" and wouldn't boot past that. When I insert my driver installer disk, it gives me a basic DOS window thing. dir A: shows the files in the disk. dir B: for some reason shows the same. C: says "Error reading from drive C: DOS area: general failure". All other letter:'s just say "invalid drive". (I'm doing this with both harddrives in.) I attempted connecting the harddrives to an old computer, but it gave an error for both. (It detected the harddrives, but said it had an error reading from it. Windows Explorer asked me to format it... {i'm willing to format one of the drives if anybody thinks it will help, but the old harddrive has data I'd prefer not to lose.} ) Looking on google, I saw several problems that all have similar problems (less overdescripptive than I am though) but none of the fixes suggested worked for me. Also - as I have two different with different errors, I only need to make one of them work.)Also - my other available computer has a CD burner / floppy drive if either are required. I also have several USB's. The computer can boot from USB's and CD's (tested), and I could easily take the floppy thingy and connect it to the computer.also - this computer is probably still under warranty unless unscrewing the hard drive voids it. .. does that count as modification of the computer?
View 5 Replies View RelatedI have a USB external hard drive that I keep all my documents etc on (had it for years)I upgraded from Vista Home to & Home Premium then had to upgrade recently to Professional to run my Sage. Through all these upgrades my ext. drive ran fine. Occasionally the drvie letter would change if I had something else plugged into the USB, this was always easily corected in disk management by changing the drive path.The connection on the case packed up so I had to get the drive put into a new case, now when I plug it in the drive is assigned G instead of F, I tried to change the drive letter allocation in Disk Management but it won't let me as the program still thinks I have a second ext. hard drive which is labelled F. I suspect this has happened because when the usb connection broke the drive was disconnected suddenly instead of a proper eject.How do I get Disk Management to remove the inactive drive - i can't find any obvious way - eject, delete etc are all missing when I click on tools or tasks.
View 2 Replies View RelatedI installed Ubuntu on my computer a few months ago and created another partition for it on my 1TB hard drive. I didn't really care for Ubuntu so I decided to delete the partition it was on. That might have been a mistake. Well, now there's 87.68GB of free space on my hard disk that I can't use and I don't know how to add it back to my c: partition.
There was another post about this a couple years ago, but I don't understand the instructions and am not actually sure if it worked. Can someone explain how to do this, please? I'm not completely computer illiterate, but I'm not familiar with partitioning disks. It was just the one time with Ubuntu.
My laptop is Acer with Windows 7 home premium 64 bit OS. It contain only 1 single partition disk that is c drive only.Recently, i accidentally convert the c drive which contain OS into dynamic disk.After i restart the laptop, it shows the following: BootMgr is missing Please press Alt, Ctrl +del to restart Now, i not able to enter the window. I am so worry because my important data is kept inside the hard disk, and i still not yet do any back up copy on it.I searching on this forum and learnt that i need a window 7 installation disk to repair it, but my problem is the computer dealer not give me any windows 7 installation disk when i baught this laptop as their said all the driver and windows program already kept in side the harddisk.I tried to remove the laptop hardisk which is a 500GB toshiba SATA hardisk. Then, i use the other laptop with Windows XP professional with the intention to copy yhe file inside the toshiba hard disk.However, after plugged in the hard disk to the other laptop, under the disk management, it shows that the toshiba disk as : dynamic disk, unreadable.i having problem to backup the data inside the toshiba hard disk.....
View 8 Replies View RelatedI've been noticing after re-installing Win 7 that I get random floppy drive seeks and the hard drive light flashes like crazy and then everything is fine again.I have Clamwin AV,Spyware Blaster and Spybot S&D installed,but that's it,no Windows Defender or Essentials AV.Any ideas what causes this? It's a minor annoyance,but I just want to make sure it's not damaging anything.Also would Readyboost help me? I've got 2 gigs dual channel PC3200 ram(or I could go with 2.5 gig single channel PC2700)and a P4 at 3 gig until I can afford to upgrade my comp.This is my first post in quite awhile so I hope this is in the right place
View 7 Replies View RelatedI installed Ubuntu on my computer a few months ago and created another partition for it on my 1TB hard drive.
I didn't really care for Ubuntu so I decided to delete the partition it was on. That might have been a mistake. Well, now there's 87.68GB of free space on my hard disk that I can't use and I don't know how to add it back to my c: partition.
There was another post about this a couple years ago, but I don't understand the instructions and am not actually sure if it worked.
Low disk space, Can transfer data on D drive to an external hard drive
View 5 Replies View Related