I hope someone can help me because I am completely stumped! I noticed these malfunctioning drivers, but I have no idea what they are for or where they came from. I googled and got absolutely zero results. After not being able to find ANY information, I made a restore point and uninstalled them. They were gone for a few hours or so after rebooting but reappeared! Now it's multiple drivers and I still have no clue of their origin or purpose. Nothing else seems to be affected and the computer is running the same as always. I would still like to get rid of them, though, and I am at a complete lost. I ran virus and malware scans and both were clear.
brand new computer eveytime i boot up after a bit i get the BSOD. i have windows 7 ultimate X64 after a short wile no matter what im doing i get the BSOD saying IRQL_NOT _LESS_OR_EQUIL. i know some basics about computers but this has me stumped.
Installed Windows 7 and my Apps the way I wanted them and made a system image using Windows 7 built in tools.
In the same folder my WindowsImageBackup fodler was created, three "mystery" folders have appeared and i cant delete them? Looking at them they might be something to do with .Net??
I was looking over the menus in my router (SBG6580) config page. As of right now I have my netbook and iPhone connected. I found a laptop listed that I do not have:
00:24:2b:bb:6d:d3192.168.000.004255.255.255.000D:00 H:01 M:00 S:00Fri Dec 13 20:45:53 1901 laptop
I selected it and deleted it. Where did it come from. Should I change my router/wireless password?
When ever i have any type of screen open (i.e. the internet, a game, word, Photoshop, ect.) and i hit the caps lock key, my computer takes me off of the program i was using. It did not exit out of it, its just the same as if you are typing, click on the task bar, then have to re-click on the computers window of the program to continue using it. This is very annoying when it comes to typing long essays.
I have been having problems with my computer not showing the windows contents while dragging. About once every 2 weeks, I will turn on my computer and that function will be disabled. So what I would do is go to Computer Properties -> Advanced System Settings -> Performance Settings, and then check the "Show window contents while dragging checkbox.
Today however, in the last 2 hours, the function has just disabled itself 3 times already. Everytime, I go through the same process to turn it on and it just won't stick for more than an hour.
I tried booting into safe mode to scan for malware and viruses but I cannot go into safe mode just by tapping f8 right before windows starts. I have tried many times but to no avail. I think it is broken because the only way I can go into safe mode is via msconfig, but I would like to avoid that. Also, the volume does not go down, only up, and I have tried using both the function keys and the main volume control. It will go down but it goes up again by itself.
i was on my laptop and it randomly turned black and acted like i shut the lid so basically it went into sleep mode. so i had to close the lid and then open it again to make it turn back on. so after it started working again it started acting pretty strangely i already went into full details on this Internet video by recording it then using the annotations so.
Internet - whats wrong and don't say its a virus 100% sure its not a virus. for the others that dont want to watch the video its basically really glitching i can't click my bookmark page in google chrome i cant grab the scroll bar in ie and the start menu is super glitchy it seems like the code or something is messed up. it goes away sporadically too.
When I went to add a new Bluetooth keyboard (Control Panel>Add Devices).When pressing Add Device, nothing happens.I have two Bluetooth devices already installed, are listed under "Devices" are "found" and work fine.Problem is that, I can not either add new devices or, remove any of my Bluetooth devices already installed.Click Add Printer - fine, the wizard starts.Add Device - nothing."Remove Device" - when a device is highlighted for removal, the system appears to be "working" for a moment, but then does not remove the device, it remains.Have checked that Services related to Bluetooth have not been disabled but am wondering if anyone knows if there are any specific services that would be required for Add Devices or Removal of Devices to function? (HID Devices and Plug and Play are Started / Automatic)
I'm running Windows 7 32 bit and I just noticed that all my drivers for the USB controllers, Audio/Sound devices and the Networking internet (Broadcom Netxtreme Drivers) have all died. They indicate that a Code 39 is the problem. I tried to load some of the drivers but it wouldn't allow them to install. I did a last known configuration attempt, no results. Did a system restore and it gave me an error message saying it didn't restore properly. I am trying to get the drivers online, burn them to a disk and load them. I have no internet access on that PC and the USB ports obviously don't work. I can get drivers on this PC online. Some I can't find. I did the uninstall driver, disable, all the usual for this problem. I am stumped. Any recovery attempts produce nil results. Thanks to Microsoft, I have no installation disc to do a new install or a backup image.
I'm taking a ghosted image to another machine. On the image I have my device drivers set with static IP (e.g. Local Area Connection 1 is the static IP I want). I have two local area connections, 1 and 2, and 1 is what I want it to be while 2 is a default Microsoft IP.I put that image onto another system and after loading it I don't have Local Area Connections 1 and 2 anymore but Local Area Connections 3 and 4. When I first boot, the computer says Device Drivers Successfully Installed.Why am I losing Local Area Connections 1 and 2 and thus creating 3 and 4 which both have default Microsoft IPs? I want to retain the Local Area Connection 1 that has the static IP that I desire.
Having issues with RAID0 array being detected by Windows7 Ultimate x64 as SCSI. Apparently these drivers are the 'default' drivers that install when the RAID array is initialized. There is no option at this point to install other drivers instead.Using DeviceManager, there is an option to 'update drivers', and regardless of the method chosen, even selecting the file for a previously-downloaded set of drivers, Windows7 always comes back with a message of "Windows has determined that the best drivers for your system are already installed". Considering that SCSI drivers are the OLDEST ones out there, and actual SCSI devices are becoming rarer and rarer, how is it that these drivers cannot be replaced with more current and more applicable drivers?
I've recently been having various issues with my pc, among the things I tried to do was update my graphics card driver: found the newest driver crashed madly, and rolled back.What benefits are there in going for the newer ATI Catalyst drivers compared to the one defaulted by windows but which hasn't updated in 3 years. Generally what could have changed? Compatablity? If it works it works. Stablity? Performance? Heat management?Since it takes me 2 hours to download a driver (slow connection) I'm sticking on my Windows 7 default ones: I know they work. It does make me ask though if there is a benefit to upgading after i've got my PC stable again.
Whats the recommended installation procedure for installing drivers for specific hardware from a developers site or using the windows 7 default drivers?
For example when I install my windows 7 x64 Betas it found and installed the drivers for my chipset and everything fine. However browsing my Motherboard manufactures website I see they Drivers for chipset, audio, and other components I can download.
Would you recommend I stick with Microsoft drivers or use the drivers on the developers site?
whether I can replace the Elantech drivers with Synaptics drivers, I have tried adjusting the sensitivity in my Elantech touchpad in my Acer Aspire 5750 but still not comfortable with it.I have tried to use windows7 generic drivers by uninstalling Elantech drivers but when I restart Elantech drivers are installed again. would preferably like to install Synaptics drivers if that's possible but I am not sure whether that will work.
I have a simple question, I recently fresh installed Windows7 and was wondering if I should Install the new mobo drivers from the ASUS site (i have an ASUS P5Q Pro) or should I just keep the current microsoft drives for all the chipsets/lan/etc. The only Thing I installed was the Realtek sound driver. Would there be any advantages to install proper drivers? because right now my computer runs perfectly stable and smooth using the Windows7 ones.
I've just updated my Acer Notebook to Windows 7. I've installed all the drivers that Acer supplies for Windows 7.
But what about the drivers that are not supplied? Should I install the ones that Acer supplies for Vista or stick with the 'pre-installed' drivers by Windows 7 ... Everything seems to work with the pre-installed ones.
And how do I check wether or not the Intel Turbo Memory is working correctly?
Have one question, When I installed Windows 7 the only drivers I have installed were my video and audio which are not part of the motherboard (not onboard). My computer runs fine but 1 game but more or less I never installed any driver for my motherboard.
Normally you install the motherboards nforce drivers, raid SATA/IDE drivers etc... Do I need to go back to my motherboard vendor and find updates for windows 7 or just leave it they way it is, or should I install the drivers off the motherboard CD I have here? My mobo doesn't have any windows 7 updates btw there all windowsXP based drivers.
On my Lenovo W510 laptop I'm currently using the 14.1.1 PROSET drivers from Intel's website for my Centrino Ultimate 6300 wireless adapter. Lenovo just released new drivers on their web site with 14.02.0000. Going off of numbering the 14.1.1 drivers are obviously latest although I have seen that whatever drivers are made for Lenovo are always a little different (features and such). In this case is it better to go off of the laptop manufacturer's drivers (even though they are a lower number and seemingly older) or the wireless manufacturer's page (Intel).