Make Another Disk As System?
May 7, 2012
Situation: I have RAID 0 as C with Windows 7 installed and E with old Vista installation.
I want to remove E disk because it is failing and I don't need Vista on it either as it is non bootable from previous crashes. However E disk is System disk and if I detach it, my Windows 7 on Raid 0 does not load with error: "A disk read error occurred Press Ctrl+Alt+Del to restart." When I connect E back everything boots up normally.
I forgot to say that before detaching E disk I performed Change boot drive action in EasyBCD 2.1.2 to C, but as I said disk read error then happens. I also tried startup repair with Windows 7 installation cd but it founds no problem.
View 7 Replies
ADVERTISEMENT
Feb 9, 2013
I did a search in the Windows 7 forum for system repair disc and got no hits so here I am asking.I have only Windows 7 32-bit installed here so I don't have a 64-bit system with which to create a system repair disk. I do have a Windows 7 Ultimate setup disk. How can I make a Windows 7 64-bit repair disk?
View 2 Replies
View Related
Aug 19, 2012
I have a SONY VAIO that's about 8 months old. I recently installed Outlook.I woke up a few days ago and the computer prompted me to run recovery. I first transferred everything to a USB drive (even though nothing saved) and then ran recovery over several hours.I had to reinstall everything from Office 2007 and now, my computer is very slow.I am not sure what to do next, and I am afraid to do anything else short of bringing my computer in to tech support, even though I do not want to be without a computer for a few days.
View 1 Replies
View Related
Dec 21, 2012
make a system repair disk for another computer
View 1 Replies
View Related
Nov 29, 2012
I wanted to use my 180gb ssd as a boot drive and I do not know what to do. I installed windows and some drivers on the hdd but i want to start over and I need some guidance.I am doing a clean install now. once thats done how do i make the ssd the boot drive to make my system scream! also will i need to put drivers on both hdd and ssd?
View 5 Replies
View Related
May 8, 2012
I want to make a recovery disc to reset my entire 4 partition dual boot hard drive back to its current state. the recovery would reset both xp and win 7 which i have dual booting. can i make one single image to do this without it screwing up my boot loaders etc? what should i use? 3rd party software?
View 9 Replies
View Related
Sep 16, 2012
i'm going to flash my bios to a newer version with DOS, but i'm not sure how to make a DOS-bootable DISK?
View 9 Replies
View Related
Dec 13, 2010
hard drive 1: (vista)Plugged the hard drive in, the start up screens and the bios both recognise it, yet under 'My Computer' and when trying to install vista on it, it wasn't showing up when asked where I wanted to install vista to. I'm positive I have wired it up properly as there's only 2 wires which are completely different from one another. I do have with me the original installation disk that came with the PC also.
hard drive 2: (windows 7)Same sorta situation with the PC not finding it really. Though his PC only has enough power connections for the 1 hard drive and he wants both at once (there's 2 power connections that fit, but the other goes to the CD drive) Also in the 'cage' bit there is only room for 1 hard drive. also I can't seem to make a installation disk, when I have the old hard drive in, it created a repair disk, not installation disk.
View 7 Replies
View Related
May 3, 2009
I come with cap in hand and head bowed in shame at this, my first post - after so many months reading the knowledge that so many of you seem to have.
I seek your help if you would please. After downloading at 45k all day what I believed (and still believe to be!) was the iso image of the RC, I (merely?) have the RC content that I need to create a bootable disc.
I have used Bart's BBIE to extract a boot image file from my previous W7_7068 disc and I now have 'image1.bin' at 2k.
But from here? - How and where do I merge this bin file with my W7_RC content? (I'm using 'CDBurnerXP').
Call me a 'noob'or call me a 'knob', either way I'll cop it sweet.
View 4 Replies
View Related
Jan 27, 2010
I download a software, it has iso file. Because I have no CD-ROM, I want to make it to a USB bootable disk and boot this software from USB, rather than. install it on my hard drive. Can Everyone help me?
View 4 Replies
View Related
Jun 30, 2012
I used to have only 1 partition to do everything with. I'm reinstalling windows 7, and I would like to take this chance to partition my drives the correct way to help the computer run faster and waste less memory. I browsed through multiple articles on disk partitioning but I just can't grasp the idea. I'm not too good with computers. Would any be kind enough to explain/teach me how to correctly and efficiently partition my disk?
View 17 Replies
View Related
Oct 20, 2012
How do I make a Recovery Disk?
View 4 Replies
View Related
Mar 29, 2012
im usin 2tb segate new hard disk sir..in my system i cant able to boot my os and also my hard disk...its showin that hard disk boot failure insert system disk press enter ...i restarted many times its sayin the same problem...in my gigabite mobo bios my hard disk is not get detected sir....the problem is that wen im installin the new os for 2nd time its all went nice only sir but at the completion of the os it wil ask for the user name and password but in my system its frozen sir fully of black screen and i cant able to do anythin so i restarted my system from that im gettin this error as hard disk boot failure insert system disk press enter.....that my new hard disk and all of my data is in that hard disk only..this problem arises wen im installing the os for 2nd time sir.
View 6 Replies
View Related
Jan 5, 2012
windows 7 disk boot failure insert system disk and press enter
View 1 Replies
View Related
Aug 27, 2011
I woke up this morning, and I found that my computer was displaying this message"Disk boot failure, insert system disk and press enter". There are a ton of needed documents on the computer, and I'm hoping that they can be saved some way.
View 5 Replies
View Related
Oct 13, 2010
I've been having this error even after reformatting and reinstalling Windows 7 on my desktop. I've done reformatting / reinstalling Windows 7 several times, yet the problem still occurs. I'm thinking of my HDD as being corrupted or messed up. The problem occurred after I accidentally hit the CPU when I was stretching my foot. The screen froze after that. Upon rebooting it, 'Disk boot failure, Insert system disk and press enter' occurs. After I entered the DVD installer of Windows 7, the screen just hangs.
View 9 Replies
View Related
Feb 17, 2010
I have been having a bit of trouble with windows 7 lately, namely that it won't start up right. When I boot from the drive normally, it gives me the classic "BOOT DISK ERROR: INSERT SYSTEM DISK AND PRESS ENTER" message.
However, I soon discovered that if I boot from the Windows 7 cd and do not boot from it (By ignoring the "Press a key to boot from CD or DVD..." Windows 7 boots up fine.
I've tweaked my BIOS over and over, but the same problem persists. The drive is brand new and fine. What can I do?
View 10 Replies
View Related
Jan 10, 2013
My friend bought a new PC and needed to put am OS on it. He put in the W7 disk and the error message 'disk boot failure insert system disk and press enter' appeared before installation was shown. He has tried changing around BIOS and it also recognises the hard drive and DVD/ CD ROM drive. Here is the specification he was given:Case : CIT Reaper Black Mesh fronted Tower CaseMotherboard : Gigabyte 78LMT Motherboard TechnologyCPU : AMD Bulldozer FX 4170 4.2ghz 8mb CacheHard Drive : 1tb Sata Hard DriveMemory : 8gb DDR3 1600mhz MemoryOptical Drive : 24x Dual Layer Sata DVD WriterGraphics Card : Nvidia Geforce GTX 650 2gb GDDR5 With HDMIPower Supply : 750 Watt Branded Power Supply Also, he has tried booting BIOS in different order
View 3 Replies
View Related
Aug 4, 2011
I know this isn't really where this should go, but I don't know where else it should go.
I have a hard drive that needs a firmware update. The update is an exe that has to be run from a dos environment running from a cd. how do I make a cd that can do this? I have tons of stuff, but the only cds that will boot don't have the exe, and modifying any dos boot image to add the exe makes it unbootable. I really need to do this, because the hard drive is useless without it. vockleya has chosen the best answer to his/her question.Click here to view the answer that was selected.
View 4 Replies
View Related
Jun 10, 2012
how to make a win 7 boot disk then add programs that are avaiable on this site and run them off a dvd to try and bring a Dell laptop that i purchased last year. also if there are other scanning software that can be recommended would be useful. I have some computer background, but not advanced. One last item, is there such a scanning software that can detect injected services that are hooked in win 7 to slow down your laptop?
View 1 Replies
View Related
Jun 3, 2011
how to make hard disk become unallocated?just like a new hard disk
View 1 Replies
View Related
Mar 17, 2011
I recently purchaced a new notebook, shipped with Windows 7 64-bit HP. I need 32-bit in order to run certain programs, so I used my Windows 7 Ult DVD and installed it on this laptop. I did not delete the recovery partition that was already on the drive, but I re-installed my own Windows 7 on the partition with the pre-installed Windows 7. This was a mistake... I lack a lot of drivers and pre-compiled software that is not available for download from the manufactor. So, I hope there is a way to make the recovery disk bootable, so I can boot from it in order to respawn the pre-installed Windows 7.
View 3 Replies
View Related
Oct 10, 2011
I'm building a new computer and I heard that you can make a bootable windows 7 boot disk? It could save me $100+.
View 4 Replies
View Related
Sep 5, 2011
When starting the computer, I keep getting "Disk boot failure, insert system disk and press enter". Nothing works other than putting in the boot disk and hitting the restart button on the tower. Then it will boot up and run fine. But how do I stop it from having to have the disk in order to load? Checked in the BIOS and the hard drive is the first load.
View 3 Replies
View Related
Apr 7, 2011
I installed a second HDD and installed Win 7 onto it and then t/f all data from the original VISTA HDD over.Been running just fine for a few months. Decided to remove the old VISTA drive and now I get "no disk" error when I bootI assume that the boot files reside on the old VISTA drive as I used to get the boot manager screen asking which OS to boot.What is the easiest way to make the Win 7 disk bootable now?
View 9 Replies
View Related
Oct 29, 2009
Right now I will upgrade my Vista laptop to Windows 7 . I already did it before with the RC and worked great.
Anyways there are certain functions on my laptop I use . So that's why I didn't do a clean install. But if there is any problem and I need to reinstall windows. I will have to install Vista first . Till SP1 is the best I believe and then again Windows 7 .
A big hassle if you ask me?
Is there a way to make a boot-able DVD or something of my laptop once I upgraded to windows 7 and I take kind of a snapshot of that moment.
or something else'
Like when i got my laptop I had to make 2 DVD's so I could reinstall windows. Was hoping I could do the same with Windows7 somehow.
Another thing is. I have an English Windows Vista on a machine but will get a Dutch windows 7 upgrade. I don't think I can upgrade from a English to Dutch right? Although the upgrade is Ultimate?
I also can install an English version of Ultimate and use the key from the Dutch ultimate? or is the key from the box really only for the DVD that's in the box ?
View 9 Replies
View Related
Nov 13, 2012
I got a new acer laptop and I want to make a restore disk but dont know how?
View 1 Replies
View Related
Jan 19, 2013
Though there is 200 GB space available in my C drive I cannot create a disk partition using disk management , i am getting the available shrink space to be zero when I click the shrink volume.. but I do have free space..My system is Dell Vostro 1440.. How should I make the partition now?
View 1 Replies
View Related
Feb 1, 2011
I know this is a simple question, but how do I make a backup copy of a new program disk in Windows 7... which I am allowed to do (according to the terms and agreement)? I want to do this so I have a backup in case the original disk fails.
View 12 Replies
View Related
Nov 11, 2012
I recently bought a dell inspiron 14r laptop. It came with windows 7 Home premium which was pre-installed. The problem with it is, the whole 640GB was allotted to a single drive C. I want to repartition the hard disk into 6 drives. But they didnot gave me the windows 7 installation disk or its serial. What should i do now? I had created the recovery discs using the manufacturer's recovery media.
View 4 Replies
View Related
Dec 16, 2012
how do I make a copy of my window 7 home premium disk? I have 8 new CD-R 700MB blank disk will that work for them ?
View 2 Replies
View Related