For some reason, auto text does not work in one document that I have with a letterhead. Sometimes it does and other times not. The auto text options are all there but they do not work if I type the first three or four letters. They do work,however, if I open a blank document, but not in this particularly letterhead.I know when I first starting using the new computer, it asked me about saving the normal doc on this particular document and I don't remember if I did or did not.After that I believe is when it was no longer Only with this particular document with letterhead. I tried deleting the normal doc and copying from another computer, but still the same problem.
Ok this is wierd I have a client using Office 2007 pro and some of her docs that she recently updated and the problem is when she prints the docs text that she deleted is printing over the top of new text she inserted into the doc.
Now when you have said doc open in WORD the deleted text is not there in any view and does NOT show in "print preview".
I opened said doc with WORDPAD and the deleted text shows up at the bottom so its still in the word doc somewhere imbedded so it prints over the top of the actual text in the doc.
I normally use Word 2003 for documents, although I use Outlook 2010. This morning I opened a Word 2010 document and after quite a while of some sort of an installation, I was able to open the Word 2010 document. I did not think too much of it, except that later I was sending an e-mail and attached a Word 2003 document and when I went to check it (i.e. open it up) it opened in Word 2010. How do I disable Word 2010 as my default program to open Word documents. I do not want to uninstall the program, but at this point I am not ready to learn how to use Word 2010.
I've been having an issue with Outlook 2003. I've had to rebuild my computer, and in doing so, reloaded Office 2003 and I use Outlook as my email reader. For some reason, when Outlook 2003 downloads One (1) particular recipient, it converts their emails to text only. 100's of others come in as HTML and I have no issues with their emails?
This occurred after the rebuild. When I received emails from this person prior to the rebuild their emails came in just fine as HTML. Nothing was changed to the best of my knowledge?
Computer: Home build ASUS Mainboard AMD Athlon II X4 620 Windows 7 Professional 32bit SP1 Office 2003 AVG 2012 Free Edition (Email Protection Active)
Using Win 7 Home premium and Word 2003. Record new macros, but they're not available if I close and re-open Word. Have renamed normal.dot to oldnormal.dot but don't see a new normal template. Have Acrobat 9.0 but found past problems only with Acrobat 7Everything worked fine using Word 2003 with Vista so wonder if Win 7 is the proble
I have WINDOWS 7 32 bit, with MS OFFICE STANDARD 2003. WORD docs. take at least 2 mins. to open - and to save. This applies to docs. saved on MY DOCS and new docs received as e-mail attachments. The strange thing is that this was not the case when first getting the new PC with WIndows 7 -- it has developed within the past month and is most inconvenient as I work with MS Word docs. daily. I changed my antivirus from AVG to Avast, but no improvement re. the MS Word docs.
In windows 7, in my email program, a Word 2003 doc will not open. I must save the file to a folder, and then open it. This is the only type of file for which this occurs. I have gone thru the Default Programs drill and tried all types of options, but with no success.
sporadic (4 out of 10) issues with saving files. Opens file from the network (AD) drive adds data which takes about 10 min. then saves the file. The save appears to be successful then user closes file and gets file permissions erro Yes or No to save file to another location or change name. They save it to another location. The original file disappears from the network drive.
When I want to copy a text from a web page into Word , it will not copy the FULL page. From left to righ,t it will cut off about 10-15% of the document on the right side of the page.. I tried moving the arrows on the top of the page and it doesn't seem to help.
So. Running XP.2 (can't run XP.3; it kills Adobe's CS2 apps, which I need). Had a spare partition. Before putting Ubuntu back on it, I figured I'd install the Win7 Ultimate that'd come (unused) with another computer.
(The install was smooth enough. The updates were slower'n snail poo. But after turning almost everything back to the Windows Classic theme, it's almost bearable. Only two of my devices were unrecognized and unsupported, and they're no surprise; the tablet's nearly twenty years old (even the manufacturer doesn't support it) and the scanner's older still.)
Installed copies of my must-have software--Office 2003 (I've had to suffer through Office 2007, and will never ever ever put it on a machine I have to work on), Photoshop and InDesign CS2, Winamp .
I got my first real exposure to User Access Levels when, the first time I ran Word 2003, Win7 wouldn't let me save the new Normal.dot. I later went and copied my much-customized normal.dot from its XP location, so the file's at least there. But: I run Word on a portrait-oriented monitor. Under XP, Word remembers the window size and position, and it's exactly where I want it, all the time. So far, every time in Win7 I've opened up an existing document, the Word window has instantly shrunk to around 40% of the size it's supposed to be.
I'm curious if this is a cling-on permissions issue with normal.dot under Win7, or a registry setting that simply hasn't gotten made (in XP, Word seemed to take care of remembering where I put and closed it by itself). Did a search, but didn't see any questions that seemed to relate to this, so I'll ask.
(I'm trying to like Windows 7, I really am. I don't much, but I'm trying. I don't mind the thought of getting a new tablet, and I've got another scanner I can use. But I really dislike having to resize my windows every time I open a document--I spend 75% of my time on the PC in Word, just writing.)
And again, I hate, loathe and despise Office 2007 and 2010. I do most emphatically not like the "death by honey and marshmallows" interface that microsoft seems to think is so great.
since I installed SP1 for Office 2010 I have problems with opening some (not all!) older Word documents created with Word 2003 (*.doc). I get a message that Word can't read the document and it is probably corrupt.On a other client (same OS, Office 2010 without SP1) I can open the same document without difficulty.
I am unable to keep my default settings with Word 2003 and 2007 (font settings, AutoText etc). If I close out of word and reopen it, all my settings disappear.
I've loaded Windows 7 and Office 2003 on my desktop. However whenever I try to Route Recipient from Word it start by giving me a message that says.A program is strying to access e-mail addresses you have stored in Outlook. Do you want to allow this? If this is unexpected, it may be a virus and you should choose "No".I respond to Allow access and then choose a recipient from my address book to send to only to receive this message.General mail failure. Close Microsoft Office Word, restart the mail system and try again. I've tried closing word and Outlook and restarting them with no success. I've researched and found this problem when Vista was first released but the registry entry fixes identified as work arounds there don't work. how we can still use the routing recipient in Word 2003 while in Window 7.
Is there any way i can create an auto updated text file of my computer's ip address and have it in dropbox? I'm trying to connect to my computer via a remote connection app on my android - "Xtralogic Remote Desktop" and setting a static IP doesn't work on my router for some reason, i tried and tested it. So i was wondering if i could keep a text file in my dropbox that i could access from my phone that has my ip address of my computer so i can enter it into the app whenever i want to use it via 3G.
Suddenly, whenever I copy anything in Word 07, the copied text is bracketed with square brackets. They are gray color, and they are not reflected in the clipboard contents, so I believe they are non-printing characters.I have never had this happen before, and can't figure out what is going on.This occurs when using the mouse or CTRL-c to copy. It shows in Print, outline, and Web views.
I have Office 2003 Word installed on 3 Windows 7 Home Premium machines, but on one of them the program is very slow to open and close. I have uninstalled and re-installed many times with no improvement.
There are strange icons when I am in Windows 7 with Office 2007. I first noticed this when I needed to do a project. Because of the lack of new software, I had to save the file in the doc file format. Then, when I tried to open it to edit it, I noticed that the file icon was not right. It was the blank file icon with the Word 2007 icon on it. Then, I noticed that the rtf files have the correct file icon for doc files. The files can still open, but the wrong icon drives me nuts!
In word 2010, I have a table of contents page and I justified the text to give it a clean look so that chapter headings are in line as well as the page numbers. When I print the page my printer does not print the justified text. Is this caused by my printer or is it in word? and how can i fix it?
For unknown reason, I suddenly encountered problem with highlighting text on Internet Explorer (8) and words document (office 2003). I also have problem with dragging a cell (for copying a formula) to other cells in excel. I tried to play around with my keyboard (pause/break and scroll lock key), sometimes it worked for once, but I it won't work the next time I tried.
FYI, I am using windows 7 Ultimate 32bit and a razer keyboard (using windows default driver). I probably can try to install the driver from razor, however, i thought there is probably a simple fix for the issue i.e. a certain key from the keyboard got activated by accident (my little daughter sometimes punched the keyboard for fun).
I am trying to create a template with specific styling to be used by our group. Any document created with this template should be saved to a shared network folder. I'd like to know if this is possible...When I right click on my template and choose NEW, the resulting document should use...- the default text font face, size and colour that I specified.- the default paragraph spacing and indentation rules that I specified.
I would like to know if its possible (and how to do it if so) to justify a paragraph of text in Word 2007 to gradually get narrower.What I mean is, id like the first line of text to be longer than the one after and so on until I end up with something like this,I want the 2nd line to start further to right of first line and end closer to left and so on. Im struggling to show an example but hope you know what I mean. Basically centre justified but going down in a V shape
I have a project where I need to search a large amount of text files on my home PC. I recently upgraded from Windows XP to Windows 7. My research indicated this feature was available in Windows 7.
If you do a search in Windows XP, you get a bunch of fields. You can pick to search for text INSIDE the particular sub folder structure.
I have found this feature in Windows 7, but it is different. I have tried using wild cards but it does not seem to work properly.
All of the sudden, when I want to copy and paste something in the same document, the formatted text (whether that be a certain font or bold) does not transfer over to the pasted text. For instance, if I wanted to copy the following bolded word word and then paste it anywhere else in the document, I now get this: word (without the bold). This applies to other cutting and pasting problems: this applies to other fonts and formatting (bold, my Greek font, etc).One more example: before today, if I wanted to cut a text out of my New Testament Greek program right in the middle of a paragraph, the Greek font (or whatever font) would paste normally no matter what font the target MS Word text was in.
I bought a Asus U36J laptop back in April of last year and ever since then I have been beating around an issue that I dont seem to be able to resolve one way or the other. When ever the laptop is on battery and in battery saving mode it has my taskbar on autohide. If I turn that off, then it stays off right until it is put back into battery saving mode at which point it is "magically" ticked on again.
Is there no way to simply disable that feature, as its annoying me greatly. I know its tied into the battery saving desktop, and I want to keep the battery saving desktop but want a full taskbar all the time. I found a supposed fix to make that happen, and while it actually makes the taskbar appear all the time, it still is a bad hack as any windows I have open wont "attach" to the taskbar but attaches to the buttom of the screen.
So for the love of god is there no sane way for me to keep the battery saving desktop but get rid of the autohiding taskbar. Otherwise I know Asus most likely wont be my laptop of choice next time aroumd.
