I have recently installed 7 and find the OS great so far. Much faster than Vista . One problem i am suffering is that I have lost both my DVD drives. When I look in Hardware I can see them - they both have a yellow exclamation mark and that the digital signatures are not signed. I cannot play or record from them. how to make the drives show in Explorer and make them operational?
View 9 RepliesI have a problem with mapped network drives disconnecting.
I run Windows 7 Pro connecting to Win Server 2003. Reboot and the drives are there. After a while a red cross appears against them in Explorer. I can usually see the contents, but running a program that requires those resources fails.
The only way I can reconnect is to reboot, but then the red cross appears again after a while.
I've updated the LAN driver and even tried setting the registry key MaxNonpagedMemoryUsage to 0xFFFFFFFF as recommended in the only comment on the subject I've been able to find.
I'd really appreciate some help here as I don't want to go back to XP!
Well I`m wondering what`s the best way to install Windows 7 in my case. I currently am running Vista 32bit on a system with 3 mechanical drives one of 500gb which i`d like to keep and 2 older and smaller drives which eventually I`d want to get rid of. I just ordered the following:
Windows 7 Professional - Retail version
A 120Gb SSD HD
A 1TB mechanical hard drive.
What`s the cleanest way for me to install Windows 7 64bit? I was thinking of unhooking all drives except for the new SSD, install Windows 7 onto it and then after hooking back up the old Windows Vista 500gb drive and formatting it. Is that the best way of doing? Or is there a cleaner/better/easier way?
After the IE9 install and a restart the Windows Scan and Fax program is no where to be found. It'snot in the programs list or in the windows turn on or off list.
View 7 Replies View RelatedI am useing win 7 ultimate 64 bit and I never made rescue cd I do have,files backed up on carbonite but no hard copy. I installed sp1 but got a fatal area code (C000009A ) and instructed to,insert instalation cd to corect witch is the point I have no idea what I did with it. How do I get another cd, a boot cd, or,restore win 7 ultimate to factory setting.
View 4 Replies View RelatedI have a Dell Latitude C600 laptop that had been running Windows XP, system crashed, (unmountable boot volume problem) so I installed Windows 7 Pro. install fine after reformatting. But now I have no sound & no connections. Says unable to locate network adapter, controller , Ethernet, PCI CardBUs drivers not found. Tried to install Zoom x6 modem but laptop can't find it.
View 4 Replies View RelatedI have lost the ability to dual boot after installing windows XP.
I Originally had windows XP. I partitioned the drive in order to install windows 7. Installed windows 7 fine, no problems, was able to dual boot. After getting data from XP partition. I decided to do a clean install of xp. After doing that my machine only boots into XP, I no longer have the dual boot option.
I have tried booting off the windows 7 dvd and 'repair computer'. It said it found some problems and fixed them. Rebooted, still only booted into XP. Tried booting off DVD again ran 'Startup Repair option' Again, said it fixed some things, still only boots into XP.
I also tried EasyBCD and it said it fixed the problems, but everything is still the same. I can only boot into windows xp. No dual boot.
My boot.ini, ntldr and ntdetect are all on partition that has windows 7 installed.
Saw the posts about Vistabootpro but wanted to make sure i went that route before i purchased it and wanted to make sure of the correct steps to follow.
Presently running XP home, want to install Win 7 Home Premium. I have two internal drives , one [c drive has all the programs] the second drive [d has all the documents, pics data]. Can I safely do a clean install on c-drive without backing up the data on d-drive.
View 8 Replies View RelatedI'm having an issue installing Windows 7 (7100) 64 bit. (I have also tried 32 bit and 32 bit v7000)
#Note, I burned the disk to a TDK-R 4.7gig Dvd using imgBurn at x2 write speed and verify. I also use the disk to install a guest os in vm workstation. So I know the disk is fine.
The install fails shortly after clicking "Install Now"
At first I get a cd/dvd driver device error or w/e. I load the drivers for my dvd drive. All goes well.
Then I get to the area I would normally select the install drive/reformat section. Instead of seeing C: & D: as usual the list is completely blank.
This is where I'm stuck and I have no clue how to fix it.
Can we install same OS in different hard drives?
View 2 Replies View RelatedI have recently bought a samsung rv511 s01 laptop. Last night I had an issue when I opened the web browser. All I got was a blank white screen. When I opened Norton internet security it didn't open correctly. With not being used to windows 7 and only using it for about a week I thought the best thing to do would be use the recovery disk that came with the laptop. I thought it would just reset the computer to an earlier day, not so. It did a full install of windows 7, now I have no access to the internet, webcam, or any of the functions that were on the computer before hand. The recovery disk doesn't have the drivers for any of the hardware on it. All the pre installed software has vanished also. So the question is where do I go now to get the machine back to the way it was when I bought it?
View 3 Replies View Relatedi got a problem in loosing D Drive after install win 7. when i check disk manager,,the partition seems like hidden(but all the previous data is exist).
as a solution i create a new partition. I thing its happen because of false during installing the win 7.
I just installed windows 7 ultimate on my pc.
i already had xp32 and vista 64 business on a dual boot on the same HDD before installing windows 7.
during windows 7 install, I selected the xp32 partition, formatted it and installed windows 7 over the top as I no longer wanted xp32.
When the windows 7 install was complete I expected to see a dual boot screen with
option 1. windows 7
and option 2. vista64
unfortunatelty i have no dual boot options, the pc now just goes straight into windows 7. It doesnt sem to know that vista is there.
i would appreciate assistance in getting a dual boot set up with vista64 and windows 7
my laptop hdd died a few days ago and I've been pulling my hair out trying to install Windows 7 on a brand new HDD i bought.I don't know where else to look for the appropriate drivers. Seagate does not provide any and there are no other drivers on the HP website.I managed to flash the BIOS with a new version just before my old HDD crashed (it was on the fritz so I managed to back up my data on a USB)
- I've also tried the Clean Installation Guide posted here, no difference.
- I've tried formatting it in Disk Management, still no detection.
I've looked at many forum topics here and it points to an SATA non-detection issue?or could it be that I"m installing Windows 7 Ultimate on a VISTA machine and it's not accepting it? I bought this new hdd thinking I could just put it in and install with no fuss but 4+ days later it's a giant headache and I can't return the hdd if I wanted to. There's a pin (primary slave) on the Seagate that was not on the original, but there are no jumper pins, could this be the problem?
I have a HP Pavilion dv9800. It came with Vista and one 250 GB HDD. I added a second internal 250 GB SATA HDD. I got the second drive formatted and so it showed as a second drive where the HHDs are displayed. I didn't have any Vista OS software on it (to my knowledge, as far as I could see) but I could use the drive for extra storage, etc.I went to add Windows 7 with an install disk. I would like to simply replace Vista with Windows 7 and have the second HDD usable as extra space, so it would serve the same function as it has with Vista. However, when I used the install disk it asked me which drive I wished to install Windows 7 on. I installed it on on the second HDD only, so now I'm running Vista on the C: drive (and it's on D: Recovery too) and Windows 7 on the drive added second. can I replace Vista on C: (and D) and then use the other added HDD for storage, etc? In other words, I want only Windows 7 OS on this machine, but want to be able to use both drives, with a similar configuration as I had with Vista.
View 4 Replies View Relatedinstall two hard drives using windows 7
View 1 Replies View RelatedSO i have just built my first custom PC and I know it is all installed correctly, except possibly my hard drive. So I get to the window where I am supposed to select the drive where windows 7 will be installed. No drives are detected... so this means my hard drive isnt being recognized... I just got th 6822148837 and my case is weird, im not sure if i installed it all the way. My case is the Thermaltake Level 10 GT and it has hard drive slots and some kind of connector in the slot so that it plugs in automatically. I think it may not be connected fully, like I might need to attach a cord too.
View 13 Replies View RelatedI am an IT professional however cannot figure out this issue on my my machine and its driving me nuts
I have Win 7 64 Ultimate on RC build 7100 and everything runs fine, however since next week the OS will expire and my machine will reset every 2 hours therefore i upgraded to the official Win 7 64 Ultimate and the blooming machine gives me a BSOD every time I try and install something on my secondary drives (d: e: f: )
Thought it was an AVG issues or access privileges since my other drives where formatted on other previous OS`s (c: for windows, d: for games, etc.) However it now even seems to be doing it if I try and install stuff on C: - now I have a hunch it might be AVG FREE causing the issues, dunno, any suggestions would be appreciated.
I'm installing Windows 7 on an older PC. It was running on it before but my hard drive bit the dust. When I boot from the install disk and go to install it, there are no hard drives listed and the message says "No drives were found. Click Load Driver to provide a mass storage driver for installation."
It's an old Dell Dimension 8300 with a couple WD hard drives in it, a 250GB and a 500GB. I could get the model numbers if that's necessary.
I have a pretty basic desktop computer (CQ5600Y) that broke down on me recently. I haven't owned it for more than a year. All I know is that I left my computer on for a few hours and when I come back to use it, it was responding very, very slowly. It took 5 minutes just for an icon on my desktop to highlight after I clicked it just once. As a result, I shut my computer off by holding the power button and then turned it back on.
When I turned it back on, it will show the Compaq start-up screen with the option for Setup, Boot Menu or System Recovery. I can get to Setup and Boot Menu, but not System Recovery. If I press nothing during this time, the computer will just turn into a black screen with a blinking cursor and the statement, "Disk Boot Failure, Insert System Disk and Press Enter". I have a Windows 7 installation disk and the system recovery disks, but neither seem to work.
When I use the Windows 7 installation disk, I choose the Windows Setup mode. It then goes to a "Windows is loading files..." screen and I assume it is loading files from the disc. It then asks me which language, time and currency format and keyboard or input method I would prefer. I choose accordingly and press "Next. I then choose "Install Now.." It states that "Setup is starting...". I then get through the licensing information and press "Next" and then I choose Custom so that I can install a new copy of windows.
This next step is where I am stuck. A window pops up with the title "Where do you want to install Windows?"
It also states that "No drives were found. Click Load Driver to provide a mass storage driver for installation." I don't know where to go from here. I assume I need to load a driver, but what driver am I supposed to load? When I click "Load Driver" it asks me to "insert the installation media containing the driver files."
I have inserted the recovery disks (there are 4 of them + one supplemental disc) and searched through them, but I couldn't find anything. What exactly am I looking for? All these file names are foreign to me. Am I looking in the wrong discs? Are there drivers I am supposed to download from some website? If so, what should I type into google in order to find the right drivers?
So I installed windows 8 on my HP DV6t-7000 and it regularly gave me BSOD until eventually it stopped booting all together. I have tried doing a fresh install of both win8 and Windows 7 but both provide me with the error that "No drives were found. Click load driver to provide a mass storage for installation". I have run the computer through partition wizard and formatted the hard drive to NTSC but the installation disks still wont recognize the drive, nor will Ubuntu for that matter.
View 9 Replies View RelatedI recently sold a pair of drives which i had installed Windows 7 onto.The drives were configured as AHCI in the bios.The buyer has come back to me witht he following message: i received the hard drives today. i can install windowsd 7 in the 2 drives. whats wrong? i try in raid mode and non raid mode and nothing.says that i can install files in this discs. what operating system was there befShort of them being damaged in transit I cannot see any reason why they would not allow Windows 7 to install on themAm I missing something? I have asked him to supply details of his motherboard. Are there any other questions I should ask?
View 5 Replies View RelatedI have a new computer that runs Windows7 64 bit. I have an older computer hard drive that has XP.I needed something from the old hard drive and hooked it up with the cables from the Windows 7 hard drive and it booted up and ran. I've since gone back to using the Windows 7 hard drive.How do I proceed to add that second hard drive running XP to the new computer so I can have the option of running either OS? I've read through some posts, but they all presume you are installing the OS to new clean hard drives, not have them already installed.Is it as simple as hooking the XP drive into the computer as a second drive and booting it up? Do I need to change some external setting on the hard drive to have it recognized as a slave? Will Windows 7 automatically change the boot to recognize the second OS and allow a choice at startup?
View 7 Replies View RelatedIs it possible to move my Windows 7 installation from the partition (both the Sys. Reserved & OS partitions) of one drive on one controller to the partition of another drive on a different controller, AND have it boot? I know "something" would have to altered, but I'm not sure "what" or "how". Is this even possible without going through a lot of hoops. Specifically I have an installation of W7x64 installed on the 1st partition of the master drive on a PATA controller. I want to move it to the 1st partition of the master drive on my SATA controller.
FROM PATA0 {sys reserved}{OS install}{data}
TO SATA0 {sys reserved}{OS install}{data}
I also have another install on the 2nd partition of my SATA4 controller and want to move it to the 1st partition of my SATA0 controller
FROM SATA4 {data}{sys reserved}{OS install}
TO SATA0 {sys reserved}{OS install}{data}
On my home computer, I have 2 physical drives. One hard drive has a single partition (D:) and the other (newer) drive has two partitions (C: and E:). Unfortunately when I first purchased this computer, the technician mistakenly installed Windows XP onto my older hard drive (D:) rather than installing the OS onto the desired C: drive.
The main problem that I am having is: Can I perform a clean install of Windows 7 onto C: drive even though my current OS (Windows XP) is installed onto D: drive? P.S. I have already backed up all files that exist in all of my partitions and would like to format all of the drives (C, D, and E)
drive spaces: C: = 40gb D: 200gb E: 200g
I have a hp dv 6000 i was trying to dual boot my pc with win 7 and xp pro, with win 7 installed first. in order to install xp i had to disable my sata native. I can dual boot but on my xp its seem I'm missing alot of drives. I have no internet or sound,
any suggestions?
How to run through a quick clean install of windows 7 and my hard drive as I believe I have some nasty root-kits. All I need to know is where I can download windows 7 again - I have product key). And some basic steps doing the clean wipe. Also could you take me through partitions and how to do one? I want my hard drive completely clean restoring my system.
View 19 Replies View RelatedYesterday, I just reinstall fresh windows 7. After I install the OS, I just realize that my recycle bin is empty. Before I installed windows 7, some of my deleted files on my other hard disk is there. But now, I could not find it anymore. After that, I tried to select show hidden folder, files, and drives and unsellect hide protected operating system files on folder options. I try to browse to one of my hard disk, which has the deleted files on recycle bin before, then I found it the recycle bin icon there as well (For instance, the path of the drive is: N:$RECYCLE.BIN). I tried to look at the properties, and I found that the missing size of the deleted files was on there. The problem is I cannot access it. When I tried to open the recycle bin, it just empty. I need some help with this. How do I retrieve the files again to the OS recycle bin, not the hard disk recycle bin? Is it possible to access it again? I really need those files back.
View 8 Replies View RelatedI have a HP Touchsmart 300-1060a (Home Premium Windows 7 64 BIT) which I bought few years back. Now for the last 6 months or so I started getting issues with my machine was not displaying anything at all after turning it on. So I had to hard reset my power from the machine and then was able to see it started displaying again.At first I suspected graphic card (NVIDIA GEFORCE) but then I did my diagnostic test and nothing was found.One day, I started re-imaging my machine as a fresh and then after this it never came back ONLINE. I read all HP forums & even HP Online support was unable to help me to find the cause.Because when I turn on my machine I can see the power light was on and could hear big fan noise but mo HDD activity at all.So at this stage, I suspected either motherboard or BIOS but wasn't 100% sure what could be the real cause because I was sure it was not due to graphic card.So first I re-setted by my BIOS to see if it helps but it didn't came up at all. So then I took my machine to a Computer repair shop (a friend of mine) and we detected it could be due to the regulator which supplies power to the CPU and motherboard.So we replaced that part and now my HP Touchsmart is running fin since then.But I have lost my HP Startup logo with options such as below: [code]
View 4 Replies View RelatedI just finished putting together my computer, installed Windows 7 Pro 64 bits. However, both of my hard drives (one SSD, one regular HDD) are showing up as external drives (plug-and-play). If I click the "Safely Remove Hardware" icon, I could actually "eject" both of my hard drives.
View 5 Replies View RelatedJust completed my first build. I have two error messages during the boot sequence that I cannot resolve. The first screen shot during boot is the Asus logo. Next is a black screen that reads: "JMicron Technologies, PCI Express to SATA Host Controller ROM V1.07.23Detecting drives; Done; No drives found"next up is another black screen that reads:[CODE]
View 9 Replies View Related