Just recently, on waking up from Sleep by moving mouse, a three-second beep in the computer sounds, as the computer wakes correctly. How do I remove that sound; how might it have begun so unexpectedly?I recently did a repair from the Windows back-up.
View 9 Replies
I have a relatively old laptop (Lenovo Thinkpad x61) which is running 32-bit Windows 7 and has an intel NIC.I have been trying to setup wake-on-lan (inmy local network) for this machine for a couple of days and haven't been able to make it completely work. I have upgraded the bios and the drivers on the machine to the latest versions and also enabled WOL in the bios and in the driver for the NIC. When I put the machine in sleep and then after 10 - 15 minutes send a magic packet from a remote machine, it does wake up.The problem is, when the machine goes to sleep and stays in sleep mode for a long time (over night), then I can't wake it up any more. The machine is still in the sleep mode (it does not hibernate), but I think it turns off something after being in sleep for a while.
View 9 Replies View RelatedAs the title says my PC outputs a "beep beep" sound out external speakers. It is extremely annoying. I haven't the slightest clue why it does this. Its kindof i higher pitch beep beep. all my specs are on my profile.
View 3 Replies View RelatedComputer freezes suddenly making a beep sound (loop),none of the keyboards or mouse commands work.Sometimes it doesn't even freeze and suddenly shut off.Its two years i have been using my computer, until now no such problem had occured. In between there was BSOD but it went automatically. After shutdown when i start the computer,it doesnt start in a single attempt,the cpu light goes on and off ,then i have to again switch it on and maybe it will start
View 3 Replies View RelatedRecently, my computer will not wake up from sleep mode. Once it enters sleep mode, the only way to get it functioning again is to hold the power button, completely shut it off, and then boot my system back up. It appears as if everything starts back up once I open the lid or press the power button to wake it up, but the screen never turns back on. The fan starts up, the backlit keyboard lights up, the leds all blink, but nothing I try will turn the screen back on forcing me to press and hold the power button for a complete shut down.I have reinstalled the latest Intel HD Graphics driver as well as the latest NVIDIA graphics driver (both the stable and beta release).I do not get a blue screen or any sort of error. Upon the restart, I am not prompted with any error from windows or any signs of the forced shut down.
View 1 Replies View Relatedmy computer sometimes wont resume from sleep when i hit a button on the keyboard, if i do it fires up then just dies out completely. its like someone hit the power switch on the p.supply. it just does this randomely, not all the time but its extremely annoying because i have to boot from scratch everytime. my specs are gigabyte ma790xt-ud4p, Amd x4 955 phenom 2 G-skill ripjaws 4gb ddr3(2x2gb) Seasonic 700w P.S CM v8 cooler and so on.im running windows 7 Ultimate 64
View 1 Replies View RelatedComputer has been working perfectly and decided to try the sleep mode last evening as opposed to turning it off. Bad move, now the keyboard, mouse and monitor are unresponsive. No way to communicate with the computer whatsoever. Tried re-booting but can tell from the sound of it, is only powering back on in sleep mode.
View 2 Replies View RelatedI built this computer in March of this year and everything worked great. I had my power options set up so I could switch between high performance and power saver for when I'm not using it. Power saver was set up to turn off display and put the computer to sleep after 1 minute. I don't recall changing any of the advanced settings but maybe I forgot something.
I used to wake it up simply by hitting the space bar and everything would come back on. I just did a clean install of Windows 7 two days ago and since then when I choose power saver and it goes to sleep after whatever time I set it to, it no longer wakes up. Well, this is where I'm lost because it still makes the same noises like the fans spinning harder and all that but nothing appears on my monitor. At first I thought it had something to do with my monitor but I just realized that the lights on my mouse don't come on either. Which they used to before when I'd hit the space bar.
My build:
Windows 7 Home Premium
Processor: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz
(RAM) 8.00GB
System type: 64- bit
Should I tweak anything? I just tried "powercfg -energy" today and it shows about 15 warnings in my Energy Report. The reason I did this is because my computer does not wake up from sleep mode sometimes.
View 3 Replies View RelatedI have an inspiron 1545 running windows 7 (x64) and I am having problems waking up my computer from sleep . Usually, when I put my computer to sleep, I have problems waking up my computer. The screen stays relatively dark when I move my mouse although I can see some light coming from the bottom part of the screen (so the screen seems to be on, just not showing anything sueful). When I try to press the space bar multiple times, my computer gives me a warning ding and it plays a sound when I insert or remove my usb mouse.
View 1 Replies View RelatedIt does this every once in a while. It happened twice in the past 2 days. I'm not sure if it's something I left open before going into sleep mode or something else.So the computer's been in sleep mode, usually for at least an hour. I do the usual thing to wake it up, move the mouse. After a simple movement fails, I try again, moving vigorously and clicking all the mouse buttons. I have also tried pressing all the keys on my keyboard.
View 3 Replies View Relatedpressed sleep button on keyboard by mistake and now im getting nothing apart from normal sound from tower i/e fans running etc,i am unable to do anything seeings how my keyboard mouse and monitor are all non responsive,,,,does anyone no away around this please,my computer a custom build mother boards an ASUS P8Z68-V LX if thats ofi read a post where i may have to reset the cmos on motherboard by pressing a reset button which i have not been able to locate yet or removing the battery from motherboard for 5 secs as you can see i havent got a clue when comes to computers so dont want to start reset or removing battery as i dont no if thats the only option i have seeings how im getting nothing and am unable to enter bios
View 2 Replies View RelatedI installed external speakers on windows 7, now when I wake up computer from sleep mode I get one loud pop, I never heard it before I installed speakers.
View 12 Replies View RelatedI recently re-installed win 7 on my dell studio 1454 laptop which I purchased 1.5yrs ago. and today while listening to music via VLC a strange screen just like tv static came up with a long beep.
My Specs: (acc. to speccy)
Dell Studio 1545 Laptop
Windows 7 x64
Intel Core i3 350M @ 2.27GHz
4GB DDR3 RAM @ 532MHz
Motherboard - Dell Inc. 0133D9 (CPU 1)
GPU - ATI Mobility Radeon HD 5450
For the last three months my computer has been playing the default been whenever I move my mouse. Anytime it beeps and I'm currently on a writing bar or program it will write a long string of q's every time it beeps. I have no idea how to stop it switched mice keyboards tried installing and reinstalling drivers and nothing works.
View 7 Replies View RelatedI currently run Windows 7 ultimate 64bit, 8gig ram, intel i7-2600k cpu, and my OS runs on an OCZ SSD (all specs are in my profile)Sleep mode is set to S3 in BIOS, I have hibernation disabled (so no hibernation.sys file on my c drive)When I put my computer to sleep then immediately wake it up, the login screen shows instantly, I type in my pass and it loads in like 0.5 seconds.When I put my computer to sleep but wait for around 1-2 hrs before waking it, it shows the login screen instantly but after i hit login, it gives me the Welcome spinning circle thingy for like 20 seconds before I can see my desktop. That's like longer than my entire boot-up time excluding POST.Event viewer doesnt show any performance delay, and I dont think my OS drive (OCZ vertex 2) has a cache so I have it disabled. I'm sure all my mobo drivers and graphic drivers are up to date.
View 2 Replies View RelatedI turned on my computer it wouldn't boot up and started to emit 4 beep sounds continually. Cant find a code fto explain 4 beeps.
View 4 Replies View RelatedFirst of all i have an ASUS P6X58D Premium motherboard and three days ago updated to 24GB of Ram.Suddenly while i was relaxing on my pc a few hours ago, a beeping sound that lasted for about 1-2 seconds started coming from the speakers. I instantly got worried as this is the first time it happened. I looked up google for "beeb sound", and i found out that this is some form of coding representing errors....but these sounds should not come from the motherboard instead of the speakers????
View 3 Replies View Relateda beep sound is being produced after starting the laptop.... a blank screen is displayed.
View 1 Replies View RelatedIt's my first time posting! I've been browsing this forum and many sites on google trying to find the solution to my problem, but I can't really understand what is going on, even when taking a look at the dump file. I ran memtest, did all the usual things, but no sign of source of error to pin point. Every single time I put my laptop to sleep and keep it like that for longer amount of time (I think it's about 20 minutes) I can't get my laptop back from sleep in a normal fashion. What I mean is, that the screen never turns back off, stays completely black, my external monitor doesn't turn on either, just goes to idle mode. After reboot I get a message that there was a blue screen error and I can try to look for solution online. I read that my SSD HDD might be the cause of it, but after updating the firmware the problem persisted and after looking at my memory dumps, I found out that DirectX kernel is causing the problems, but updating it didn't yield any results, the problem persists, so perhaps I am missing something in the dumps that aren't that obvious to spot.My RAM aren't stock that came with computer, both chips 4GB each are aftermarket ones, but I have no issues with anything when using the computer except when it is waking up and MEMTEST didn't throw me any errors after an overnight pass.
View 1 Replies View RelatedI want to say 2 days ago, my computer has decided to fail when going to sleep. It is Windows 7, completely updated with no problems to that point. When it falls asleep and I wake it up, the machine starts up and is active, but my monitors and external hard drive are never turned on as they once were and the machine just sits there running with a black screen. I restart, boot back into Windows and it says resume (as if it was in hibernation, but I have hybrid sleep on) and I just get a flashing underscore and no more. I restart once again, it says Windows could not restore the session, I start a new session and all is good again... until the computer falls asleep and the process starts over.
I have tried turning off hybrid sleep. No good. I have tried using hibernation instead of sleep. Same error. I found online where someone said they had this problem with an ATI card, but once the upgraded the Catalyst Control Center and drivers, they had no problems. That did no good. The only update I've done recenly is Firefox, but I have not seen any other reports of the newest Firefox causing sleep problems. I read where someone had a problem with waking up from sleep mode because of Firefox's memory leaks and they said closing Firefox before putting it to sleep helped.It does not matter if I put it to sleep and wake it up immediately or if it goes to sleep and when I get home from work, boot it up. The same thing happens no matter the length of time.I have a dual boot with Ubuntu, but that has been on there for months with no errors and Ubuntu will sleep and wake up just fine. There have been no hardware changes or any hardware driver changes other than the video card. I tried rolling back video card drivers to see if there was a difference with no change. My ASRock MB has the most up to date BIOS that has been out for over a year. My video card is a 5770, but like I said, I've tried older and new drivers. I tried the prevx black screen fix with no luck.
CPU = Intel i7-860
MOBO = Gigabyte ga-p55a-ud4p
RAM = G.Skill 4x4gb 1333mhz
PSU = Corsair TX 650 watts
GPU = Nvidia GTX 480
HDD 1 = W.Digital 7200 rpm (1 TB)
HDD 2 = *NEW* SSD Samsung 840 (256 GB)
The new SSD is my boot drive with a legit Windows 7 Ultimate 64 bit. I have the repair discs also if necessary.Problem = Many, but not all, of my wakes from sleep result in a blue screen of death. (I have no other BSODs)Also, this never happened using my old HDD.Two recent BSODs with different error codes = [URL]I have installed the MOBO CD drivers and the latest NVIDIA GPU drivers and latest SSD firmware (before OS install).Are there any other drivers I might have missed?SFC /SCANNOW detects no integrity violations.CHKDSK on both the SSD and HDD detects no problems.Windows Memory Diagnostic detects no problems.
Just built my new computer, and everything, including sleep, worked perfectly. I then installed GRA4 off Steam, and now when the computer wakes up it does NOT blue screen-rather the monitor inverts color, pixelates heavily, and then freezes. I cannot, or the life of me,
[Code]...
My problem usually comes when I put my computer to sleep, and then wake it up. Instead of just jumping right to the desktop screen, it now goes back to the motherboard screen and does a resuming windows operation that takes 5x as long as it used to.
Sometimes this problem causes the computer to simply restart and get a BSOD, when I am in the process of resuming windows.
EDIT: I believe I have actually gotten 2 separate BlueScreen reports during this... d1 1033, and 1e 1033.
Windows 7 x64
i5 3570k
HD 6950
1tb HD
8gb RAM
750W PSU
I installed 7RC a couple of months ago. Since then whenever my pc sleeps I can not wake it up. It used to wake up fine in XP. To get it going again I have to cold reboot or pull the plug. When it comes back up everything I was doing is still there, I just have to enter my password. I think I have all the settings right but if someone could run me through everything that needs to be set I'd be really grateful.
View 9 Replies View RelatedI have a bsod problem at wake-up from sleep on windows 7 x64 ultimate.
View 2 Replies View RelatedI am not savvy in this kind of stuff. My husband has a home built computer that runs our tv system with windows media center. He had to leave on a military deployment and right before he left he had to reinstall the OS. Since then the computer refuses to wake from sleep mode. I have to scram it to get it to come back up. Since we run the media center it ought to wake up to record automatically, but it isn't doing that either. I've checked all the power options but that doesn't seem to be the problem. Although, at this point, I really have no clue.
View 8 Replies View RelatedMobo Intel DP55WB. Computer cant enter into standby. In event Viewer I found System: e1kexpress - Intel 8257DC Gigabit Network Connection- Network is disconnected and 3 seconds later Intel 8257DC Gigabit Network Connection - Network link has been established at 1Gbps full duplex following in 2 seconds The PCP/IP NetBIOS Helper service enetered the running state following in 2 seconds Power troubleshooter -> The system has resumed from sleep . sleep time approximately 10 seconds The mobo's BIOS doesn't have Wake on Lan on/off option.
Does Windows has any overriding power settings?
Hi new user here, my RTM copy used to go to standby and wake up fine but recently when I try to power it up the machine will appear to start up, but my screen, keyboard and mouse do not wake up, also my wifi light does not turn on either.
The only way to get on to my pc is to do a hard restart.
I believe this might help:
Power Efficiency Diagnostics Report
Computer Name KYLE-PC Scan Time 2009-08-06T10:10:33Z Scan Duration 60 seconds System Manufacturer DIXONSXP System Product Name DIXONSXP BIOS Date 04/12/2007 BIOS Version 1.00.DIX OS Build 7600 Platform Role PlatformRoleMobile Plugged In true Process Count 61 Thread Count 793 Report GUID {15f6f462-9d4b-4faa-a8b5-f49855e75b24} Analysis Results
Errors
Power Policy:Sleep timeout is disabled (Plugged In)
The computer is not configured to automatically sleep after a period of inactivity.
USB Suspend:USB Device not Entering Suspend
The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use.
Device Name RT73 USB Wireless LAN Card Host Controller ID PCIVEN_8086&DEV_27CC Host Controller Location PCI bus 0, device 29, function 7 Device ID USBVID_148F&PID_2573 Port Path 3
USB Suspend:USB Device not Entering Suspend
The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use.
Device Name USB Root Hub Host Controller ID PCIVEN_8086&DEV_27CC Host Controller Location PCI bus 0, device 29, function 7 Device ID USBVID_8086&PID_27CC Port Path
CPU Utilization:Processor utilization is high
The average processor utilization during the trace was high. The system will consume less power when the average processor utilization is very low. Review processor utilization for individual processes to determine which applications and services contribute the most to total processor utilization.
Average Utilization (%) 14.90
Battery:Last Full Charge (%) The battery stored less than 40% of the Designed Capacity the last time the battery was fully charged.
Battery ID DIXONSXP DIXONSXP Design Capacity 2000 Last Full Charge 797 Last Full Charge (%) 39
The report points to my wifi card being the source of the problem yet I have tried disabling it and the same occurs.
I know there has to be a simple fix to this but I'm banging my head against the wall right now trying to figure this out. Everytime my PC goes to sleep I'll press a button on my keyboard or move my mouse and it will wake up just fine, but the monitor won't wake up. I've also noticed that the backlight on my keyboard doesn't show up. I've tried different monitors and removed the VGA cable from the graphics card after waking up and plugged it back in and no video. I have to reboot the computer to get video again and everything works great.. until it goes into sleep mode again. I have updated my graphics card driver (Geforce GT 210) and still no fix. I haven't made any changes that would cause this. Someone has to know something about this
View 5 Replies View RelatedUsually, the power management sleep mode shuts down the system, including the power switch indicator, which must be depressed to wake the machine back up and resume Windows. So long as the power indicator remains lit, it takes only a touch of the pad to start up again.
Lately, however, the system goes to sleep (as do I), but the power indicator stays lit. When I return, the system is completely unresponsive. I have to hold the power switch, shut down abnormally, then reboot the system from scratch.
