Loading Backup Image After Ram Hardware Change?
Feb 18, 2013
It was either here or in "Motherboards & Memory"
If I make a backup image of my entire computer (not just pictures, documents, etc) with 2 sticks of 1GB memory and then I upgrade to 1 stick of 4GB memory, will the backup image still work? or is the backup image also inclusive of the hardware at the time of backup and thus the new hardware would conflict?
I know the simple answer is just backup after the hardware changes, but I was just curious.
View 3 Replies
ADVERTISEMENT
Aug 9, 2011
I created an image using the Microsoft Backup and Restore tool in Windows 7. I saved the image on a network shared folder.I then went to the Advanced Recovery Methods in Windows to restore my image...that I just created. It restarts the computer and goes into recovery mode, I point to where the image is located, I entered the network credentials and it give me an error. "The Specified network resource or device is no longer available. (0x80070037)"
View 5 Replies
View Related
Nov 22, 2008
How to Create a System Image Backup in Windows 7 ?
View 0 Replies
View Related
Aug 24, 2009
I need a little help figuring this out. I made a backup image a while back on my network. Now that I want to re-image, I reboot as requested, wait for it to load, and Windows says it can't find my backup, "if it is on a network, close this window , type the network location."Putting in the network location does nothing, I'm just returned to the screen where it would list the backup image if it had found it, but there's nothing there.Thinking perhaps my NAS was the problem I copied the image onto a portable hard drive, but after rebooting into the restore program, Windows 7 doesn't find the USB drive.
View 9 Replies
View Related
Nov 22, 2009
if i do a back up image of my C drive can i then create a partition on the that HDD and then create a second OS using that image of C drive?
hope that makes sense
also can you update images or would you need to create new ones to keep them upto date?
View 3 Replies
View Related
Jan 17, 2012
I'm currently developing a new SOE from scratch for the company I currently work for as my first real project I have a few concerns surrounding what should be included and what can actually be achived.When I create the image from PC1 does it copy absolutly everything EG: Computer settings and Product keys? The reason why I ask is if it copies the product key aswell we could be in some serious trouble with the auditors.Branching off from my last question, is there anyway to assign a computer name and issue the pc a domain when the image is loading? Or is this not possible?
View 1 Replies
View Related
Feb 20, 2012
Is there way I can change the location of the backup files location using the Win7 Backup Manager? Right now it just shows me the location for a USB port. I would like to use a Home Group Location.
View 2 Replies
View Related
Jun 18, 2012
I have a SanDisk Extreme SSD, 120MB, as my drive "C" dedicated to the OS and programs. I tried to use [COLOR=blue !important][COLOR=blue !important]Acronis [COLOR=blue !important]True[/COLOR][/COLOR][/COLOR] Image to make an image backup to two different drives on my system. In both cases it failed and trashed the hard drives.
View 4 Replies
View Related
Aug 18, 2012
The other day I did a WindowsImageBackup,put it on the (I) drive. Right after the back up my desktop icons wont stay in place, never had that problem before. Can I just right click on the backup and delete the folder,or is there a way to do this that is safe.I dont want to run into any problems,just want to see if the icons get back to where I put them.
View 2 Replies
View Related
Oct 30, 2009
Did a fresh install of Windows 7 64-bit and all my apps, deleted Windows.old, defrag'ed and activated. Then created a SYSTEM IMAGE using Win 7 BACKUP and RESTORE, so far so good.
Win 7 and my apps take up 43.9 GB on the hard drive but the SYSTEM IMAGE it created on my external drive is only 23.7 GB. Tried it on my laptop with similar results ISO was about half the HDD. Does that sound right? Just seems the ISO should have matched the HDD GB-wise unless it compresses or something.
View 9 Replies
View Related
Nov 7, 2009
I perform an incremental back-up every day using the built-in backup program.
How often would you do a whole system image? I was thinking of only doing that every few months or less. Each image would be 80GB.
View 5 Replies
View Related
Nov 11, 2009
I think that's what it's called. anyway something more then just a backup. One that you don't have to reinstall your software to get it into the registry.
Do I need special software? or is there a utility in Windows 7. If not what do I need to buy?
I just.. just finished Windows 7 installation. Now my D drive is failing. Both drives are the same make model and old, in fact they were in an older computer and almost everything in the pc was updated except the harddrives because they are more then sufficient in size.
So maybe I should replace them both. But I don't want to go through the pain of reinstalling. Anyway, I usually have to reinstall due to my husbands email "joke sharing" practice usually gives us a virus about twice a year.
This backup would be very helpful, I just never looked into it until now.
View 6 Replies
View Related
Oct 11, 2011
just attempting my first back up image on my new build. I only have one HD with Win 7 prof on a 200gb partition and 750ish remaining on the hd.Should I do it on the 200gb partition with win 7 on or the storage partition with 750 or create a new partition of ?
View 6 Replies
View Related
Sep 18, 2011
I have a large number of image files on my C: Drive. 337,000 files. Many are duplicates. I want to back these up to a new drive and edit them there. Is there a way of doing this with Windows 7 backup? Or some other free backup utility?
Windows 7 Home and Business 32bit
View 4 Replies
View Related
Oct 15, 2011
I have a system image that was saved to a maxtor one touch ext HD via USB. This was created using Windows 7 image making system. I am trying to copy the image to my new HDD (internal) 1TB. The problem is when I go to recovery>advanced options>restore from image and reboot, the PC cannot find the image. I can click advanced options and search for a driver and actually see the drive and the image folder/zips but Windows 7 cannot detect it. I have also copied this image to a internall HDD because I thought it may be the USB. I have not changed any BIOS settings as I am using Windows 7 on the 1TB HDD and trying to restore to that from either the Dnetouch or the F:internal HDD. Neither times will it find the image.uestions. Do I need to use an alternate program like paragon or clonezilla2. When the image is saved, it is the name of my pc. Example: Fesktop64-PC. Does it need to be in a folder or the image be a specific name? Ive seen WindowsImageBackup as a possiblity.
View 6 Replies
View Related
Apr 8, 2012
I am going to upgrade to Windows 8 Consumer Preview, so before doing so I backed up Windows 7 as a system image to my external hard drive. In doing so, I forgot that a system image includes all the files on the drive, which means it backed up about 700 GB worth of data. That's OK except I already had those files backed up individually, so now my external drive is basically out of space for future use. Instead, what I'd like to do, is do a system image of factory state without having to lose the files already on my drive. Is that possible? I could always go back to factory condition, and save the system image, but then I'd have to re-add all my programs and files after I get the Windows 8 upgrade completed. I'd rather not have to do that unless it's an emergency.
View 5 Replies
View Related
Sep 20, 2012
My problem is if I restart with HDD on,it freezes when windows logo pops up during startup. I have a bunch of saved stuff on the external besides the backup img.Its a 500gb.It still froze when I only had 10gb saved on it. Will it delete everything I have saved on my external if I boot the img? I have a extra 20gb laying around,it is large enough to hold my saved backup.
View 2 Replies
View Related
Oct 7, 2012
i just ran the Windows 7 systems image bu first time. completed and created recovery disk. message said completed.when i look at my external hard drive, the created file contains 0 bytes; this doesn't seem right to me based on previous imaging software I have used.
View 4 Replies
View Related
Oct 10, 2012
I have a couple of these older drives in good condition is it possible to install one and backup my OS/image file from my sata drive, and be able to restore in case of system crash? Or should I get another Sata drive or usb flash drive instead?
View 3 Replies
View Related
Nov 3, 2012
I have a windows image backup which is taking up 60gb. I need to delete it but i dont know if its safe to just delete normally.
View 2 Replies
View Related
Jan 9, 2013
Right now I am backing up all my files and folders through SyncToy (for easy access) but I'd like to also back up my entire Windows image with the same kind of automatic method (only transfers changes from the previous backup). Is there a free or paid program that does this?
View 5 Replies
View Related
Nov 17, 2011
I have a 1TB external hard drive that I will use to make a Backup Image. I'm going to Use Symantec Ghost to make a backup Image.Should I partition the External hard drive first? I would also like to use it to store other files and folders. If so, how big should the partition with the backup Images be?How large is a typical Image backup file? I also plan on backing up 2 other linux machines.
View 7 Replies
View Related
Nov 2, 2009
When I use Win 7 backup, it gives me the option each time I create a backup to create a system image. I created a system image on a CD a couple of days ago. Why does it ask me if I want to create another each time I do the backup? Is it talking about creating one on my hard drive, not a CD?
If it's just my hard drive then perhaps I should create one each time, but creating one on a CD is onerous. Plus, if this is the case, (that it wants me to create a CD) I don't know how that's to be done if the backup is on a schedule in the middle of the night.
View 3 Replies
View Related
Apr 12, 2009
I don't know if this has been asked already and sorry if it has.
Is there a way to save both Vista and Windows 7 complete system image on the same partition? If possible rename the folders at least (I tried this but didn't work)?
I have a limited space in my hard drive and allocated only one partition for system backups. I'm quite happy with Windows 7 and I would like to have both Vista and Windows 7 backups just in case. I'm also trying to avoid multiple DVDs as backup media as much as possible so that restoring the image would be easier for my kid when i'm not around.
View 1 Replies
View Related
Oct 9, 2009
I have run the "create system image" successfully until today. I have an external HD for that image file. It appears to run, goes through the steps and says it has created the image. But when I go to the external HD and click on the Image file that was created there is nothing there. It shows 0. What could I have done to do this. I even looked for that image file on my C: drive, just in case, but it is not there either.
View 4 Replies
View Related
Oct 15, 2009
My ST3500418AS 500GB died and took my Windows 7 with it, so I had to do a fresh install to another hard disk.
Unfortunately, Backup and Restore cannot see the backup location from my previous install, so I can't get my files back that way.
I presume that the VHD file I see in the backup folder is the system image of the previous install.
Is there any way I can extract my files from this VHD using some software package, or even convert it to another format such as ISO and extract my files that way?
There's a lot of great pics and stuff there that I don't even remember where I got it from, so I'm pretty desperate to get it all back.
View 3 Replies
View Related
Nov 1, 2009
I'm trying to make a system image and configure backups but I'm unable to select the internal drive that has the space I need.
I have a 1Tb drive portioned into C: [Windows 7] and D: [Data]
and a 750Gb drive [H:] that used to have XP on it that I want to put my backups on.
I used to dual boot XP and Windows 7.
Computer Management > Disk Management shows
C: Healthy (Boot, Page File, Active, Crash Dumo, Primary Partition)
D: Healthy (Primary Partition)
H: Healthy (System, Active, Primary Partition)
System Imaging/Backup help says you can't backup to the system (startup) drive (not sure why?)
Is there any way to change which drive is designated as the system drive?
I've removed the dual boot and used bcdedit on C: to only reference itself
What's else do I need to do to make C: the system drive?
View 6 Replies
View Related
Nov 5, 2009
I make use of the Windows 7 Backup and Restore programs.
Automatically everyday a backup is scheduled.
This backup is configured to contain all user files and a system image.
Now I have tried to find the system image, but I don't know what file extension the image backup should have.
In my backup folder, below, only two .VHD files are present, and a bunch of XML Documents.
X:\WindowsImageBackup\XXXX\Backup 2009-11-04 160010
Can someone explain me in which files the backup and restore programs save the backups?
Also I like to know where I should look for, to know for sure my backup is done successfully.
View 5 Replies
View Related
Dec 1, 2009
I made a backup image a couple of weeks ago using Paragon Backup & Recovery ,but since that time I have deleted about 80GB of files.
I don't want those files put back on my C drive if I need to do a restore from image.So I want to start fresh with a clean image and then do my scheduled differential back ups.
I can't remember how to wipe the info off the ext.Can't find an answer in the Paragon program.
Any suggestions?
View 2 Replies
View Related
Aug 23, 2012
first off let me say I am not 100% sure where to post this in the first place but I thought here is at least a start.My wife rendered her laptop without a working screen a little while ago which I replaced. But her HDD now will not boot or even read on a all in one HDD reading device. So i cannot access the info on it. I was dumb and did NOT make a image/backup of the drive. Warranty is out. I have a brand new HDD (same make and model) but do NOT have a legal copy of Windows 7 (business I think was on it). I am somewhat at a loss as what to do.My buddy suggested 'getting' a copy of Windows 7 and the using a CD key changer to make it match the one on the back of the laptop but I was hoping there was something to do more on the legal side of things and still not pay any more money. It is not a very expensive laptop and I have already almost doubled its cost replacing this stuff.
View 6 Replies
View Related
Oct 15, 2012
I am trying to make a disk image in Win7 to a partition on my USB HDD.The partition is a freshly formatted 116GB. Win7 says the backup image will require up to 45GB. Yet when the backup process begins, it returns an error message saying there isn't enough disk space for the image.This is apparently a bogus message because I have saved other backup images of this PC to that partition in the past. In fact, I just re-formatted that partition to remove an older image of the same PC (same approx. size image) so I could save the fresh image to it. Can anyone tell me why Win7 insists there's not enough room on a clean 116GB partition for a 45GB image?
View 3 Replies
View Related