Is there a way to designate a specific OU when joining a PC to AD so that I don't have to join it, then performa separate action of moving it from the default Computers OU to the desired custom OU?For example, I want a laptop to end up in the following custom OU: "<Domain>/SF/Laptops/Windows 7" .(Interesting note - when I typed the reference OU above without the quotes, the ""Windows 7"" is automatically changed to "Windows 7" when I save the thread.)
My copy of Windows 7 has already been activated by me months ago, full legit retail of Ultimate.
However, today at home, I joined it to my domain down stairs in my basement. It joined successfully, but now the of my Window 7 PC is asking for activation again upon each login.
I have a number of new Window 7 laptops and have joined the company domain with no problems (SBS running Windows 2003).When I was on the domain I set up a number of printers by browsing the server mainserver\OkiC9650 and finding the printer and it and correctly installs the drivers and provides me with full functionality for the printer.However, if for some reason I have to leave and then rejoin the domain, and I don't delete the printers first, when I rejoin the domain the printers are no longer showing (as one might expect), and when I try to add them again, or add anything connected to themainserver\OkiC9650 I get an error.
It don't think it is anything to do with the printer as I can't connect to any printer in this way.Although the 0x00000006 indicates a permission problem it is not that or a setting problem as it works the first time and no changes are made other than leaving and rejoining the domain.It happens with four laptops, two different makes, and three different models.I don't think it is a Server problem as I have tried leaving the domain, and deleting the Computer name from the Active Directory, and even tried giving the joining computer a different name between leaving and joining. I was hoping if it was recognised as a new computer it would work at least once - but still no good.I am therefore left with the assumption that the problem is with Windows 7, there must be some sort of reference not being cleared that results in a 'duplication' type error when I try the same action again.
If I delete the printer first, before leaving the domain, I can rejoin the domain again and setup the printer correctly, the problem is when I don't delete the printer first, I can never then connect to the printer in this way (I can connect directly to the printer if I use the printers IP address).I am convince the problem is with Windows 7 - can anyone suggest where the mainserver\ reference is being held in Windows 7, or if I am barking up the wrong tree if they could suggest what tree I should be barking at?
how can I join windows 7 home premium to a domain, while my domain option is already off in my computer, what is the way to make that on and connect to the domain?
I'm trying to join a domain on Windows 7 and I receive the below error message. I'm testing with 2 computers on the network. The other computer is a server with Windows Server 2008 and DNS installed. I set the DNS on Windows 7 to the server's IP address. Installed domain controller using the frasersales.com domain. After restarting the server the computer logins into the domain. The A record for frasersales.com is also pointing to a website. Not sure if this will affect it.Pinging the domain controller works. I was reading on the web that after installing the DC there should be SRV records in the DNS managers domain name folder. Looks like these are missing. Is it possible to manually add them?
Note: This information is intended for a network administrator. If you are not your network's administrator, notify the administrator that you received this information, which has been recorded in the file C:Windowsdebugdcdiag.txt.The following error occurred when DNS was queried for the service location (SRV) resource record used to locate an Active Directory Domain Controller (AD DC) for domain "frasersales.com":The query was for the SRV record for _ldap._tcp.dc._msdcs.frasersales.comCommon causes of this error include the following:- The DNS SRV records required to locate a AD DC for the domain are not registered in DNS. These records are registered with a DNS server automatically when a AD DC is added to a domain. They are updated by the AD DC at set intervals. his computer is configured to use DNS servers with the following IP addresses:192.168.0.3- One or more of the following zones do not include delegation to its child zone:
I would like to authenticate to a domain server without actually joining the domain. The reason is that I would like to use the central password database, but I still want to run my own machine and not be limited by all kinds of policies.
I'm installing Windows 7 Professional on my laptop and I'm at what I think is the final set up stage but it has been trying to connect to the network and apply the settings for an hour now. The loading bar is still scrolling continuously and I can move the pointer round but I can't do much else.
we upgraded from sbs2003 server to sbs2008 server. We removed the pc from the old domain and then added it to the new domain. Something went wrong after we joined the new domain it doesn't see the new domain for login and the local Administrator account has been disabled. The only account available is the guest account. Is there a way to enable the local administrator account again?
Hi everyone. I installed Windows 8 today. I did partition the disk like in a guide, however, I missed where to install...I downloaded a Windows 7 iso image today and burned it to a disk, will I be able to install Windows 7 again from a disc? I still have Windows.old folder in my C drive, is there any way to dual boot Win8 and Windows 7?
I am getting the following error from past 2 days :-It says "Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. insert your Windows installation disc and restart your computer.
2. Choose your language settings, and click "Next."
3. Click "Repair your Computer".
Status: 0xc0000225.
Since i dont have the recovery disc so i downloaded the one from torrent but of no use as it failed to read from the USB.
I installed Win 7 Ultimate onto my brothers Win 7 Home Edn laptop. I didn't realise at first and he has done quite a bit of work on it since the installation, on iTunes and the like. I only noticed the error when trying to activate windows and, of course, as the laptop is Home Edn, and I used an Ultimate disc it didn't take the key on the laptop. So I have now installed Home edition and have the Windows.old folder present. I basically need to put all the programs and file/folders etc into the new OS.
the XF's are lost after rebooting Windows and it does not happen every time, ie occur alternately eg after 2 and sometimes 10 days...then i go to device manager sound and i have sb x-fi but at sound i havnt sound icon so i click right at sb x-fi icon at dm and uninstall...reboot windows..after rebooting sond install by itself my sound card from motherboard is disabled at bios.
the stellar customer service at Dell I have had to recently reinstall windows 7. I was running windows 7 prior to this installation and therefore those files have been moved to windows old. How do I reinstall this file? I'm assuming the process is the same as for other versions but being as I'm not that technically savvy I don't know how to change the command scripts to suit my situation.
I have a PC running Windows 7. It is constantly being locked out, and windows XP and windows 2000 both allow you to use the windows tool ALockout.dll to discover which process is causing the lockouts. Does anyone know if there is a similar program for Windows 7?
MS and their mail systems are giving me grief. I have a Vista 32 PC using "Windows Mail" and want to transfer email folders (lots) and messages to Windows 7 using Windows Live Mail 2011.Windows Mail was a replacement for Outlook express on Vista.Windows Live Mail 2011 is a replacement for Windows Mail on Windows 7.I tried a couple of things.
1) Basic Export and ImportI exported relavent files: Account info, Contacts and all the messages to a folder (in Windows Mail format) on old computer and used the old "Addias" transfer - copied folder to stick and RAN it over to the new computer. - Imported (using the Windows Mail format) the Account info successfully, - imported the Contact info successfully. - Import Messages - appeared at first to be successful
Issue: Message folders appear to be renamed and some folder names have been truncated, not all folders appear to be there. (Looks like "long Name folders greater that 8 characters get truncated)
2) Tried the "Easy transfer mechanism (Vista and Win7 transfer utility) - but couldn't get the new computer to see the Vista even though I could see them on the network. I thought that this would transfer the folder names correctly.I'm about to try a time consuming effort of coping folder by folder (export/Import)What I am more concerned about is that the individaul messages may have the same issue Ie not all coming accross and subject names being lost. Looking for alternative or third party transfer solutions?
I just bought myself some new parts for a new computer I built. After buying the parts and assembling it I tried to install windows 7, keeping in mind that this computer has no previous os installed in it, completely blank. I somehow managed to get to safe mode and install till the part where it says expanding windows files completing that step fully and rebooting to continue the installation, I have no idea why but after when it restarts, it freezes at the "starting windows" screen with the four orb animation. It should just go to the next screen with the blue wallpaper asking me for the language I would like and what not. But it just gets stuck there and doesn't move on, I tried
rebooting removing as much devices I had plugged into the motherboard removing everything but the mouse and key board removing the graphics card removing one of the two sticks of ram
[code]...
I have tried everything I know of and I don't think I need to update my bios because no one else has encountered this problem. Swell I am not very good with computers I am very new to this so...I also heard about updating drivers , but don't u need to actually be able to login to your computer to download and install them? I can't even log in, I wait for the windows logo to pass but it never does please help Tom Hardware community.
I bought a new computer that came with a Win 7 HP license, however I already have a copy of Win 7 Ultimate on another smaller HDD that dual boots with XP.I have copied the Win 7 HP partition to the smaller HDD that has dual boot Win 7 Ultimate / XP using EASUS Partition Manager. Then I disk copied the smaller HDD to the new larger HDD thus wiping the original contents of the HDD.So far so good, the larger HDD now has C: Windows 7 Ultimate; D: XP Pro; E: Windows 7 HP. Of course the boot manager only has entries for the C: and D: partition.I think I can use bcdedit to add another entry but I am a little confused about how to do this, I've seen examples for Win 7 and XP or Vista but not for 2 copies of Win 7. Can anyone tell me what bcdedit commands I need to run? For instance I could run "bcdedit /create {} /d "Win 7 HP" but I don't know what to put inside of the {}, I think I need a new UUID but I don't know if I should be running "bcdedit /createstore" first or something else.
Yesterday i wanted to change my OS to windows 7 64bits (I had windows 7 32bits before and worked just fine). The installation goes well but when windows install tries to reboot to complete the installation it hangs on "windows start" and reboot again and again. I tried several solutions such as
- Install using a different cd (3 different cds and same problem) - Install from USB flash (not even working) - Fix boot system (from command prompt using windows repair cd) - Re-install windows 32 bits (same problem) - boot in Safe mode (same problem it reboots again and again) - Windows system repair (from cd)
PS:I have a Dell inspiron M 560 (Core 2 Quad, 4Go in RAM).
I have a Toshiba Satellite A505-S69803; serial number Y9340538Q, with Windows 7, 500Gb HDD at 5400rpm and 4Gb RAM... I think that's all correct.Anyway, long story short, I got a b!tch of a virus, which apparantly was doing all sorts of nasty things to the explorer.exe file in particular. So I backed up all my important stuff: files, Uni work, writings, music and photos etc onto an external hard-drive and went about restoring the laptop to out-of-box factory settings by making the Windows 7 Recovery Media Discs. But when I try to use the discs I get told after about 30 minutes The Toshiba Recovery Wizard "Can't read from the source file or disk: PREINST5.SW5" with options to: Try Again (The same thing happens), or Skip (Same message again), or Cancel (in which case I'm back where I started).After the Recovery Wizard failed I chose the option to erase the hard-drive; it then appeared that when I turn on the laptop as normal I was told <Error>: F3-F200-0002 and the Recovery Media Disks still refuse to work.Now, if I turn on the laptop as normal a message telling me to insert the installation disc, choose language and click "repair your computer". So I put in the recovery disc and get the same message.
Toshiba can't help as my A505 is an American model in Britain and out of warranty anyway. Europe Toshiba HQ don't supply the recovery media for the A505 and the American based Toshiba aren't allowed to send the Recovery Media to Europe; so apparantly I get no help from them. And Microsoft can't help me because my laptop was purchased with everything pre-installed so the codes associated with my Windows and Office are comletely irrelevent.I have been told that I need to purchase a compeltely new hard-drive and purchase Windows 7 brand new to get my laptop back up and running. Purchasing a new OS isn't too much of an issue because I can just get XP for a tenner, validate it with Microsoft and then get a student upgrade onto W7-Ult for �60. So �70 in total, I'm fine with that. But do I need a new hard-drive too? Or can I rescue everything I already had?
I just installed Windows 7 Ultimate on my Dell Optiplex 755. It originally had Windows Vista Business. 64 bit OS. After Win 7 Ultimate installed I immediately want to access files or folders and I'm hit with a Explorer.EXE
Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item.So after doing some research I re-installed a second time this time formatting the drive first. Then installing Windows 7 Ultimate. As soon as I get to the desktop I received the same error as mentioned.
I am unable to download windows updates KB2524375 and KB9478321 for my windows 7 home premium. I have downloaded Hot Fix KB947821 but still get error. Log shows MUM 0X00F0900. Its seems that I have a registration problem but my windows was downloaded on my new acer computer. These are the only updates I have been unable to install.
Had a bad storm last night, so I shut down the comp. Restarted this a.m. tried to stream the Arsenal match and mozilla would crash every time I tried to leave the home page. Went to IE, watched the match, and then began to TS moz. After a bit I decided to unistall. Upon trying to reinstall i get a corrupt file error msg during extraction. I then tried to d.l. Chrome and had problems w. that too. Yet amazingly enough, IE works fine. Is this Microsoft just f'in w. me 'cause I'm not amused?I also notice that in my start menu I have no quick select icons for network connections, control panel, etc.
Mobo: Biostar A880GU3 CPU: AMD Phenom II 965 GPU: ATI HD 5770 PSU: Corsair 750w RAM: 4GB (2x2) DDR 3 HDD: WD 320gb OS: Win 7 Pro 64bit
I've just recently purchased a generic wireless mouse from eBay. more specifically, this one: 2.4GHz USB Receiver Wireless Optical Mouse F PC Laptop | eBay it doesn't work. I'm running Windows 7 64bit and it started installing the drivers, first it was installing "HID Wireless Mouse", then it switched to "USB Input Device" but failed after 3 seconds. now it's listed in Device Manager as "USB Input Device" with yellow sign that indicates it doesn't work. I tested it in 2 other Windows 7 32bit computers and it works just fine! installing drivers and everything. moreover - I testes my bro's logitech wireless mouse on my 64bit Windows 7 computer and it works fine. I think Windows fails on recognizing it. I mean the drivers are there.. the Logitech Mouse works but mine doesn't.. how do I make it work?
Formatted Windows 7 loads shows Win 7 Logo and Screen blank with cursor
I have an Acer laptop 4551, got hit by nasty viruses and on top no restore intact. I formatted the hard drive which gave me an error 83% and stopped. Today I turned on laptop to install fresh genuine Windows 7, I popped in the DVD and done everything in BIOS selected Boot from CD. Everything was Ok I hit enter to Continue then comes the Windows 7 logo and after that a blank black screen with Cursor, that's it! I done that some 5/6 times but no luck.
I have a lenovo pc 9210 all diags pass all hardware is good. was running xp fine loaded vista ok loaded windows 7 32 bit runs ok, needs windows 7 64 bit...loaded windows 7 64, reboots after load begins first time setup then completes as normalreboots ....and hard drive light blinks .... then starts to start windows 7 but gets the four colored dots then just sits there no more hd lights no , no nothing.
I transferd all of my music files from my old laptop whih is a toshiba windows vista. Most of the files have the artist, album and genre. Howvere, when i view them on my new laptop a lenovo ideapad iwndows 7, it isn't showing the properties for most of them...some yes...but very few. i just dont get it. I tried t save to a hard drive and then save to the new comp and to save to a flash drive and upload...same result both ways. I dont want to have to go through all 2000+ musc files and reenter all the properties..