Is There Any Difference In Xp / Vista And Windows 7 Operating Systems
Feb 1, 2012
Is there any difference in xp, vista and windows 7 operating systems regarding. control requests over control pipe.? we have developed drivers for ndis port miniport NDIS driver.its working fine with LTE network in XP and vista. but in case of windows 7 operating systems. when we send control request to stop network to device, we are not getting response from device. we have observed Lecroys usb analyzer logs. we are not getting response. even though we its device side problem. why this issue is not happening in xp and vista.we have two applications for sending control requests to device for starting network.
1) company application.
2) mobile broad band Microsoft provided default application .
this issue happens only with company application. we have compared data in requests send by cm and mobile broadband but no difference.
I have both Windows 7 Home premium 64 and 32 bit installed on a split partition on my hard drive, but when I try go to boot, both editions just say: Windows 7. How do I change of the operating systems to boot to for the BCD File in Windows 7 so that perhaps one of them says Windows 7 32-bit while the other says Windows 7 64-bit. I know that in XP it is just a text file you have to edit, but in 7 it seems a bit more difficult.
have got windows 7 ultimate version of operating system on my system, . but i also want to install windows xp in it for some reasons related to my education. can i install an other operating system along with the existing one, such that at every start up i could select the required os to be functioned
I have 2 internal HDDs. My primary is Ubuntu and the second is Windows 7. The system time is correct is Ubuntu but 4hours ahead in Windows. I reset it, but after I boot into Ubuntu my Windows will be 4 hours ahead again the next time I log into it.
Is it possible to put 2 Live OS / operating systems on a flash drive? Possibly by making it have more then one partition, but how would the booting work? Anyone have any idea how to do this? Also, how different is a flash drive from an ext. hdd? Can I install Live OSen on a ext. hdd?
i recently installed windows 7 pro after having vista for a while. Ive noticed i have somehow managed to install 2 windows7's onto my HDD, and my windows vista is still there, just wondering how i completely get rid of vista and only have 1 windows 7 installed
I am running windows 7 pro 64 bit on a WD 500 gig Sata Hard Drive, The other day I pulled the sata cable from the 500 gig sata and installed a samsung 250 gig SSD and loaded win 8 pro. The install went great. The problem is when I connect the sata cable back to the 500 gig HD to boot to win 7 I have to hook to a different slot on the motherboard to get it to boot. If I want to boot to the win 8 hard drive I have to do the same. If there a easier way to use two hard drives with two different OS in one computer so I can boot to either one. I dont want to dual boot on same drive.
I have a 64 bit version of windows 7 that has the Window XP mode bonus virtual guest OS. So my question is should i nest a virtual OS inside windows XP mode if i want to install MS-Dos a 16 bit operating system or can windows 7 host a 16 bit guest OS
I did a clean install of Windows 7 Home premium on a new hard drive. Previously, I had 2 hard drives and ran a dual boot, one XP and the other Vista. After Win 7 install, my machine originally gave me the option to boot into ony one of the three. After a few re-boots, it started skipping the splash screen and would automaitlcally got to Win 7 (I have no issues with this).
Now that I like Win 7 and everything is running fine, I want to format my other two drives. Problem is that my system won't let me format the drive with Vista on it as it seems to be using some system files or something. I've tried it from my computer, disc management and command prompt with no luck.
I removed the boot sequence from msconfig so only Win 7 is there and I used EasyBCD as another way of trying. Still can't format the Vista drive. All I want is my computer running Win 7 only and use my older drives as backup drives.
I have Win7 on NTFS, Ubuntu 10.04 on EXT4 and a third partition for general data with both operating systems can access.The third, shared partition is in FAT32.I have had this set up for years with no problems. Recently, I have found that files that I use, move, etc on my Ubuntu sometimes become corrupted. It is very occasional but is occurring more regularly. I use many files (obviously) but only a fraction of those appear to suffer with the problems. The files are generally left irrecoverably corrupted. It is only files that are stored on the shared FAT partition that become corrupted.All partitions are on the same drive.
To solve the problem, I reboot into Windows and sometimes CHKDSK does it's thing and sorts it all out. However, when CHKDSK does not run, the files are irrecoverably gone. CHKDSK says there are orphaned files, removes and recovers them. Sometimes, a file which has been deleted on on Ubuntu may then cause CHKDSK to scan, find and remove the file (or more particularly, sets all affected sectors to null). I can't quite place the error. Possibly in a ageing and failing Hard Drive? The Laptop is circa 3 years old-ish. I would say that combining file systems is an invitation for trouble - but genuinely I have never had any problems with it before. Sometimes I access Ubuntu when Windows is suspended which I feel may cause Read/Write collisions at OS level but if that is the case, surely it should prevent me accessing the file, rather than permit it and then treat the sectors as bad?
I have a couple of games that do not agree with 7 at all no matter what, and I would like to have multiple operating systems on here. How would I go about putting 98 on here?I have the disk and key. I want it to where I can choose which one I want.
I just finished setting up a triple-boot-system with Windows 7 and 2 Linux distros, and it got me thinking about the perils of making backups.Should I treat every individual partition as if it is it's own Hard Drive, meaning I only Image 1 partition at a time?Or should I image the whole drive as one, imaging all partitions?
I am running two systems off one laptop. One 64bit and the other 32bit.On the 64bit system all is well and working fine, but on the 32 bit system there is no wireless adaper been detected in the device manager. As i say, the actual wireless card is fine as its working perfectly on the 64bit system.What I am asking is: How do I get the device manager to recognise the wireless card within the 32bit system?
In my first partition I have windows xp, and in the second partition windows 7.Is it safe to use only one swap / pagefile from only one partition (first one where resides windows xp)?My pagefile size is set to be in the first partition and at fixed size (minimum 4096 Mb maximum 4096 mb).Or should I make/move/user a swap file from the second partition (windows 7 partition). Far as I know from my benchmarks the hardisk is faster in the first partition (first 20 GB), that would be the xp partition, fast in the second one (from 20 to 50 gb) after this the speed is decreasing.I am using windows xp because Photoshop and some games seem's to be far more resposive and faster than in windows 7, and I use windows 7 for internet related & other stuff
I have got two separate hard drives one running Windows 7 one running xp. I need to be able to chose which os to run but currently I can only do so by pressing F12. I have tried EasyBCD but it wont work - does anyone know how I can do this?
Dell XPS 435T/9000 with intel i7-920 and 6gb memory. Computer is crashing and Dell says it's a software problem, not hardware. Windows 7 was installed as a free upgrade over Vista.What do I have to do to perform a fresh install? All my critical data is backed up.
I've spent the last couple of days trying desperately to resolve this issue. I have looked everywhere but cannot find an answer... PROBLEM: I have thousands of PDFs in hundreds of folders. When I go to a particular folder, I use the slider to change the Explorer views from "Content" to "Extra Large Icons" but cannot get a thumbnail preview of the PDFs - all I see is an Acrobat Icon preview.I know that this is an issue on the X64-bit verson of Windows 7, but I'm running 32-bit Windows 7 (Ultimate)! ATTEMPTS: I've tried several ways to resolve this but nothing worked so far. Specifically, I: 1. Made sure that the File Type Associations are correct.2.Unchecked Folder options>View>"Always show icons, never thumbnails".3. Made sure that Folder options>View> "Display file icon on thumbnails" is checked.4.Made sure that Performance>Settings>"Show thumbnails instead of icons" is checked.5. Tried the simple method suggessted at other forums: going into Adobe and opening the directory to preview the files as thumbnails from there and then refreshing the folder in Windows Explorer to display a thumbnail preview of the PDF file - Didn't work either!6. Ran "Repair Acrobat Installation".7. Uninstalled and Reinstalled Acrobat 9 (including associated registry files).8. Installed the latest version of Reader.9. Tried installing other software (PDF-XChange and Foxit) but these don't create PDF thumbnails in Windows Explorer either.
I had a ZT Systems I-7 920 computer that was stolen when my house was robbed. It came with a Windows 7 disk that says it can only be used with the ZT Systems computer (that was stolen). I am now building a new computer and I am wondering if I can use the Windows 7 disk from the ZT systems computer in my new computer. I paid for Windows 7 when I bought the ZT systems computer and I do not feel that I should have to buy it again.
I was wondering if i could use windows 7 on multiple systems? Im about to order the 64 bit edition for my current system but in 6-7 months ill be building a new system.could i use the same disc ?
How to load Windows 7 on scsi raid systems? the drives aint recognise i had to load sata drivers for my portege laptop m400 what drivers do i need? raid or scsi from dell? poweredge 1800/2800
Ran F12 to regain Operating system - long version. Says computer passes everything but there's no operating system found. Did this Twice. Tried "Operating System" CD that came w/ Studio 17 laptop. Hit option to run via CD & never got anywhere after an hour. Tried Reinstall Hardware disk that came w/ laptop. It shows Vista, but laptop came w/ Windows 7. See where it shows the system's checking things out, but never get anywhere.
How to move my systems on partitions ? i have 2 system partitions. vista 50gb, 2 years evolved seven RC1, working stable enough both on the same hd. how to i toggle them? i guess boot-manager than will not exist anymore.
I was just wondering about the 32bit RAM range, if im not mistkaen a 32bit system can recognize up to 4GB of ram right?
If so how much does Windows 7 have reserved? because i have 4gb ram installed but windows only reveals 2.99GB RAM useable in the control panel. Anyone can clear this up?
