i recently installed windows 7 pro after having vista for a while. Ive noticed i have somehow managed to install 2 windows7's onto my HDD, and my windows vista is still there, just wondering how i completely get rid of vista and only have 1 windows 7 installed
I have a couple of games that do not agree with 7 at all no matter what, and I would like to have multiple operating systems on here. How would I go about putting 98 on here?I have the disk and key. I want it to where I can choose which one I want.
I just finished setting up a triple-boot-system with Windows 7 and 2 Linux distros, and it got me thinking about the perils of making backups.Should I treat every individual partition as if it is it's own Hard Drive, meaning I only Image 1 partition at a time?Or should I image the whole drive as one, imaging all partitions?
In my first partition I have windows xp, and in the second partition windows 7.Is it safe to use only one swap / pagefile from only one partition (first one where resides windows xp)?My pagefile size is set to be in the first partition and at fixed size (minimum 4096 Mb maximum 4096 mb).Or should I make/move/user a swap file from the second partition (windows 7 partition). Far as I know from my benchmarks the hardisk is faster in the first partition (first 20 GB), that would be the xp partition, fast in the second one (from 20 to 50 gb) after this the speed is decreasing.I am using windows xp because Photoshop and some games seem's to be far more resposive and faster than in windows 7, and I use windows 7 for internet related & other stuff
We have three medical clinics and the front desk staff float from clinic to clinic depending on their schedule. I only started here a few months ago and I am working on upgrading their Dell xp systems to Windows 7 systems.The problem begins to crop up when say a user named Sally will come in and sit down at this system for the first time.. Well, she needs to login, click on outlook icon, let it find her exchange PST and copy settings to her user profile, then she launches the application for the scanner that she uses to scan in ID's and insurance cards for every patient coming in.. The scanner is set to default settings and needs to be tweaked on color depth and double sided, etc.. Then after that, she needs to launch her Medical EMR application.. and then choose various options in the citrix client, ..TL;DR - Each user needs to spend 20 minutes resetting the defaults at this updated system. Well this is fine except, I am planning on updating 2 front desk systems at each clinic, the user Sally will need to do all these things EACH time she finds herself sitting down at a system I just swapped out the previous evening.My thought is this, put a single system down in one clinic and let it sit a week giving most of the float users a chance to work on it for a day, setting all of their preferences etc.Once I get a bunch of them with user profiles on the local drive, grab an image of that drive and just deploy that to each system I roll out..Couple issues I am running into:First would be that I would have to register each Windows 7 copy with a new serial, which I have The next issue is, we have a mis-mash of Dell optiplex systems. 330's - 380's even a couple 320's..
have got windows 7 ultimate version of operating system on my system, . but i also want to install windows xp in it for some reasons related to my education. can i install an other operating system along with the existing one, such that at every start up i could select the required os to be functioned
I have 2 internal HDDs. My primary is Ubuntu and the second is Windows 7. The system time is correct is Ubuntu but 4hours ahead in Windows. I reset it, but after I boot into Ubuntu my Windows will be 4 hours ahead again the next time I log into it.
Is it possible to put 2 Live OS / operating systems on a flash drive? Possibly by making it have more then one partition, but how would the booting work? Anyone have any idea how to do this? Also, how different is a flash drive from an ext. hdd? Can I install Live OSen on a ext. hdd?
I am running windows 7 pro 64 bit on a WD 500 gig Sata Hard Drive, The other day I pulled the sata cable from the 500 gig sata and installed a samsung 250 gig SSD and loaded win 8 pro. The install went great. The problem is when I connect the sata cable back to the 500 gig HD to boot to win 7 I have to hook to a different slot on the motherboard to get it to boot. If I want to boot to the win 8 hard drive I have to do the same. If there a easier way to use two hard drives with two different OS in one computer so I can boot to either one. I dont want to dual boot on same drive.
I have a 64 bit version of windows 7 that has the Window XP mode bonus virtual guest OS. So my question is should i nest a virtual OS inside windows XP mode if i want to install MS-Dos a 16 bit operating system or can windows 7 host a 16 bit guest OS
I did a clean install of Windows 7 Home premium on a new hard drive. Previously, I had 2 hard drives and ran a dual boot, one XP and the other Vista. After Win 7 install, my machine originally gave me the option to boot into ony one of the three. After a few re-boots, it started skipping the splash screen and would automaitlcally got to Win 7 (I have no issues with this).
Now that I like Win 7 and everything is running fine, I want to format my other two drives. Problem is that my system won't let me format the drive with Vista on it as it seems to be using some system files or something. I've tried it from my computer, disc management and command prompt with no luck.
I removed the boot sequence from msconfig so only Win 7 is there and I used EasyBCD as another way of trying. Still can't format the Vista drive. All I want is my computer running Win 7 only and use my older drives as backup drives.
I have Win7 on NTFS, Ubuntu 10.04 on EXT4 and a third partition for general data with both operating systems can access.The third, shared partition is in FAT32.I have had this set up for years with no problems. Recently, I have found that files that I use, move, etc on my Ubuntu sometimes become corrupted. It is very occasional but is occurring more regularly. I use many files (obviously) but only a fraction of those appear to suffer with the problems. The files are generally left irrecoverably corrupted. It is only files that are stored on the shared FAT partition that become corrupted.All partitions are on the same drive.
To solve the problem, I reboot into Windows and sometimes CHKDSK does it's thing and sorts it all out. However, when CHKDSK does not run, the files are irrecoverably gone. CHKDSK says there are orphaned files, removes and recovers them. Sometimes, a file which has been deleted on on Ubuntu may then cause CHKDSK to scan, find and remove the file (or more particularly, sets all affected sectors to null). I can't quite place the error. Possibly in a ageing and failing Hard Drive? The Laptop is circa 3 years old-ish. I would say that combining file systems is an invitation for trouble - but genuinely I have never had any problems with it before. Sometimes I access Ubuntu when Windows is suspended which I feel may cause Read/Write collisions at OS level but if that is the case, surely it should prevent me accessing the file, rather than permit it and then treat the sectors as bad?
I am running two systems off one laptop. One 64bit and the other 32bit.On the 64bit system all is well and working fine, but on the 32 bit system there is no wireless adaper been detected in the device manager. As i say, the actual wireless card is fine as its working perfectly on the 64bit system.What I am asking is: How do I get the device manager to recognise the wireless card within the 32bit system?
Is there any difference in xp, vista and windows 7 operating systems regarding. control requests over control pipe.? we have developed drivers for ndis port miniport NDIS driver.its working fine with LTE network in XP and vista. but in case of windows 7 operating systems. when we send control request to stop network to device, we are not getting response from device. we have observed Lecroys usb analyzer logs. we are not getting response. even though we its device side problem. why this issue is not happening in xp and vista.we have two applications for sending control requests to device for starting network.
1) company application. 2) mobile broad band Microsoft provided default application .
this issue happens only with company application. we have compared data in requests send by cm and mobile broadband but no difference.
I have both Windows 7 Home premium 64 and 32 bit installed on a split partition on my hard drive, but when I try go to boot, both editions just say: Windows 7. How do I change of the operating systems to boot to for the BCD File in Windows 7 so that perhaps one of them says Windows 7 32-bit while the other says Windows 7 64-bit. I know that in XP it is just a text file you have to edit, but in 7 it seems a bit more difficult.
I was wondering if i could use windows 7 on multiple systems? Im about to order the 64 bit edition for my current system but in 6-7 months ill be building a new system.could i use the same disc ?
I have got two separate hard drives one running Windows 7 one running xp. I need to be able to chose which os to run but currently I can only do so by pressing F12. I have tried EasyBCD but it wont work - does anyone know how I can do this?
I have a licensed windows 7 home basic os installed on my pc. Can I install it as many times as I want on the same machine i.e. after formatting the machine, can I install and activate it more than once?
i have windows 7 ultimate before and it goes to slow and i decided to reformat my pc,Now I use home premium. Every time I boot there a list that I have to choose.When I choose the other windows 7, I'm shocked that I still have windows 7 ultimate.I think it serves as the dual boot..I mean dual os.. I can run home premium, and also i can run ultimate.. Now I want to get rid of windows 7 ultimate, which is my first os... I know how to delete, but I'm not sure if it will give any problems...I type msconfig I see the boot list try to delete since
I cannot get multiple files to delete when I hit delete on my keyboard! the delete key works just fine when only one file is highlighted, but if I have several files highlighted, the delete key on my keyboard won't work!
i was setting up my new laptop to be a dual boot machine (W7 + Ubuntu) but got an error message that i was already at the maximum number of partitions on my HDD. there is my C drive, a G drive called data (19.53GB, containing recovery_dvd 1, 2, and 3 .iso's) and two recovery partitions ( 11GB and 100MB, the 100MB one says it is active. are both recovery drives and the G Data necessary? i burned what thought was a recovery disk when i got the computer, but looking back i think i accidently burned a system repair disk instead. i also have a backup on an external harddrive (it confirms it in the backup and restore window). 180GB in C drive so its too much to backup on to dvds at this point, unless that's what recovery_dvd iso's in G drive are for? they are small enough to burn, so i would be happy with doing that and removing both recovery partitions if necessary.
Ran F12 to regain Operating system - long version. Says computer passes everything but there's no operating system found. Did this Twice. Tried "Operating System" CD that came w/ Studio 17 laptop. Hit option to run via CD & never got anywhere after an hour. Tried Reinstall Hardware disk that came w/ laptop. It shows Vista, but laptop came w/ Windows 7. See where it shows the system's checking things out, but never get anywhere.
How to move my systems on partitions ? i have 2 system partitions. vista 50gb, 2 years evolved seven RC1, working stable enough both on the same hd. how to i toggle them? i guess boot-manager than will not exist anymore.
I was just wondering about the 32bit RAM range, if im not mistkaen a 32bit system can recognize up to 4GB of ram right?
If so how much does Windows 7 have reserved? because i have 4gb ram installed but windows only reveals 2.99GB RAM useable in the control panel. Anyone can clear this up?
Started laptop (Lenovo) opened fine, but no connectivity to internet. Desk top PC close by, has internet.Tried to RestoreLaptop did not, shut down after 30 minutes. Tried System Repair, did nothing for 45 minutes. Shut down, restarted, did not open.
I am trying to get my wife's new computer up and running without any BSOD or program failures. Note that the system was not initially set up to capture the dmp files so all the earliest ones are missing. I presented the initial problems to the original seller who recommended sticking with MSE and uninstalling Norton 360 and I did that. Another forum suggested that Virtual Memory was the problem and I disabled and restored VM. Still having multiple crashes and I am hoping that I can get real help here. I do note that all the crashes have ntoskrnl.exe in the driver stack although sometimes alone and sometimes with other drivers.[CODE]