I have Second Copy 7 & am really happy with it, but of course the upgrade emails says its "a major upgrade" What do you guys think, is it worth shelling out the extra cash to upgrade?
View 9 Replies
i can't find anything solid when i looked it up on google. Every forum i saw was BEFORE the release of ivy i3's and they are simply speculating but even then they say it is 10% faster.Anyways,i can sell my current i3 2100 which i bought barely 2 months ago for about 106 US$ and get an i3 322- @3.3Ghz for about 129$. The question is,should i? Previously i had an Asrock Extreme 4 gen motherboard and it had a few Pci 3.0 slots and everywhere i read it said that all supported GPU like 7770 will give twice the performance on 3.0 slot IF the processor was Ivy. Im always looking to experiment with these things,ive tried countless GPUs,CPU's and motherboards in hope's to find that perfect build which will cost the LEAST for a new PC gamer and give maximum performance . I think this might just be it. Even with the 2100 it never "bottleneck'ed" my system,it was always my GTX 460 which was lacking.
Anyways need your opinion,and would LOVE to hear from someone who has actually had experience with both or at least the i3-3220 processor.My current system is as mentioned in my profile,what im hoping to build is:
i3-3220
Any motherboard good for Ivy bridge processors
8GB (2x4GB) Crosair XMS3 DDR3 1600Fsb Ram
either 7750 or 7770 depending on the availability and budget left
I have a Dell inspiron 1545 with a pretty measly hard drive of 135gb. I have an old hard drive from another laptop which is 320gb and i'm wanting to upgrade. I have done this before but i just used all the installation disks to reinstall windows and everything onto the new hard drive. This time however, i want to be able to copy the whole contents of my current hard drive onto the new one so that when i swap them over and i boot up the computer it contains the operating system, software and files that are currently on the 135gb hard drive. I presume there is some sort of wires, software and housing that i might need to achieve this. So far i have been pointed in the direction of this software pack (Apricorn EZ Upgrade Universal Hard Drive Upgrade Kit (SATA and PATA 2.5" Notebook Drives) Deals, #EZ-UP-UNIVERSAL - Expansys.com UK) but i was wondering if there was a cheaper way to perform the required task.
I was also wondering if the new hard drive will affect battery life. The new one spins at 7200rpm compared to the old at 5400rpm.
I'm using windows 7 32bit at the min but i have a legit copy of 64bit and wondered if it is worth while upgrading.
View 4 Replies View RelatedIs there any such thing as truly free software? Do you all know if the following "free" programs come with spyware or add-ons which can slow down my computer: CCleaner (for clearing Temp files and websurfing Cache) ImgBurn (for burning DVDs and Image files) BurnAwareFree
View 9 Replies View RelatedI am a regular IT user and I get problems with drivers once a month which take me a whole night sometimes to manually solve. Is driver detective worth getting?
View 6 Replies View RelatedAs any new version of Windows, one of the questions which puts any user is "what brings new?",and "Is that worth the upgrade?". And rightly so. Not all new versions bring lots of news and important enough to convince the user or a specific company to invest in upgrade. At Windows 7,Upgrade subject is more sensitive because it comes after Vista, an OS that simply "did not work" for some people.
Windows 7 doesn't comes with revolutionary ideas. Moving step from Vista to Windows 7 is not as big as the one from Windows 2000 to Windows XP, for example. Some people see in Windows 7 a kind of service pack to Vista, which, on the one hand, it is true. First care for those at Microsoft was to Windows 7 image don't look just as rumple as that of Windows Vista. The second was to Windows 7 don't take Vista's problems. Finally, only the third plane had located new functions.
Yes, there are sufficient reasons why it deserves to upgrade to Windows 7. Here are 10 of them, perhaps most important: Read more at the forum...
Does anyone think it might be possible to upgrade the RTM by doing a Repair/Upgrade install with the disk (comiing tomorrow!) for the Windows 7 Ultimate Signature Edition given to Launch Party givers?
It IS the same version (with some possible goodies thrown in) and a repair (upgrade over itself) install does overwrite the code while saving programs/settings, so ideally it would reactivate using the Sig Edition license key and be able to preserve my RTM installation which I like a lot.
I am now thinking of an Ivy Bridge based computer and have come across the i3-3240 @ 3.4GHz.is it worth the extra 20.00 or should i just get the 2120 @ 3.3GHzI am asking if it is a noticeable improvement over the 2120?
View 2 Replies View RelatedI'm thinking of using a ssd for my windows 7 build early next year. I was just wondering what everyone's thoughts are on them. Ocz do some good value drives but I've heard their write speeds are painfully slow
View 9 Replies View RelatedI have 4 physical hard drives, 2 of them are 150GB and 2 of them are 1000GB. Both are mirrored at the pre O/S level in order to provide redundancy. On the 150GB mirror I installed the host operating system (Win Server 2008 R2 with Hyper-V) and the 1000GB mirror is just a Data drive. I've created my Virtual server in Hyper-V and allocated it 500GB from the 1000GB mirror. When I start up the virtual Server in order to install the o/s I will be asked whether to partition this "Virtual hard drive" i.e., have a C: drive for the virtual o/s and a d: drive for the virtual data. Of course they would be on the same physical disk anyway so should I bother partitioning the Virtual 500GB drive.
View 1 Replies View Relatedwhen I ran sfc scan recently it found a problem that can't be repaired (I've run the scan numerous times). upon checking sfc details, this appears to be the problem.Cannot repair member file [l:22{11}]"PINTLGB.IMD" of Microsoft-Windows-IME-Simplified-Chinese-Core, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch Cannot repair member file [l:22{11}]"PINTLGB.IMD" of Microsoft-Windows-IME-Simplified-Chinese-Core, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch This component was referenced by [l:202{101}]"Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~6.1.7601.17514.WindowsFoundationDelivery" Could not reproject corrupted file [ml:520{260},l:62{31}]"??C:WindowsIMEIMESC5DICTS"[l:22{11}]"PINTLGB.IMD"; source file in store is also corrupted? This laptop is only 3 weeks old. I ran sfc scan on my old computer (about 5 years old), expecting many corrupt files but it showed no damaged files.
View 2 Replies View RelatedI have one internal drive with 1 TB. The data there is very important to me , so I bought External removable drive for backup. Now, I want to copy the data from one drive to the second drive but I have to be sure I have a perfect copy of the data. The data is mostly songs movies and documents. I'm using windows 7.
My question is this:
1.If I'll transfer the data through windows 7 by copy and paste, I could be sure i have a perfect copy? 2.There are tools for comparison Between the original data to the data that was copied?
What is the best free program that can copy discs to ISO files and also burn them, even if they are copy protected?
View 4 Replies View RelatedHow can I get Windows 7 to name copied files using the scheme "Copy of" (used in Windows XP and earlier) instead of the default scheme "- Copy", whenever a file is copied to the same directory as the original file?In other words, if you copy a file named "Foo.txt" in a directory to the same directory, Windows XP would have named that file "Copy of Foo.txt", but Windows 7 names the file "Foo - Copy.txt". I want the copy to be named "Copy of Foo.txt".There are several reasons why I prefer the XP style file name:
1. It is familiar :-)
2. I have existing files that use the XP style file names, and I want all my file copies to use the same naming scheme. I guess I can do a massive file rename across all my backups, but that would solve only one of my problems.
3. Most of my folders are sorted by name, and using XP style would sort all copies together. On other forums it has been suggested that one can simply sort by date (to get the copies sorted together), but that advice assumes that all copies are created after all other files are created, which is actually not often the case.
4. I often work with long file names, which means that the end of the file name is often obscured, unless I have wide windows (not always possible) and use lots of horizontal scrolling every time I want to select a file. Hovering over a file to get its full name is a cumbersome solution.
5. On other forums some have given the advice to always make copies in subfolders, but I often make copies or copies of copies while I work (it allows me to roll back or to check earlier versions of a file quickly, during my work), and using subfolders would slow me down tremendously (not to mention confuse me).
I know that when TeraCopy is made the copy handler, it renames files in a different way than Windows 7 does, though unfortunately not the way Windows XP did it. Also, if one installs a third-party directory program such as Opus, it asks for a file name every time a copy is made, but I need something that simply names the file correctly immediately.
I have installed windows 7 evaluation copy build 7201 and i want to find out if i will be able to upgrade it to the original copy and how? Any suggestions?
View 3 Replies View RelatedDo you know how to add "Copy path" and "copy name" to context menu? Like this screen shot!
View 9 Replies View RelatedI was wondering can I upgrade from windows 7 32bit to windows 7 64bit using a 64bit upgrade edition? I got told on another forum it works aslong as you input the product key AFTER the installation not during?
View 4 Replies View RelatedI am considering going to 64 bit for gaming as I believe it would be better on the games. I now have Windows 7 Pro 32 bit running. The way I understand it you need to purchase a brand new 64 bit OS. So what do I do with my 32 bit OS just trash it
View 9 Replies View Relatedtime has come to upgrade my bfg gts 250 1gb o/c! What is the best card to get in the �100-150 mark.If you look at my specs as i ant a card that will run sweet and give me good fps in skyrim!elder scrools V.(it has to be nvidia)not a fan of radeon
View 9 Replies View RelatedI have just bought 4 gig of ram to help speed up my computer but when I put it in, it says that only 2.93 gig usable. Is there a way to use this other gig that i have.
View 4 Replies View RelatedI'm upgrading a computer's ram from 512mb to 4 gb. The current OS is Windows Xp Home and switching it to Windows 7. In order for the computer to see 4 gb of Ram would I have to use a 64 bit Windows 7 regardless of hardware?
View 6 Replies View Relatedupgrade ddr to 1gb ram
View 3 Replies View RelatedI have Hitman: Absolution and Microsoft Office 2010, that both need Windows 7. Luckily, I have an official Windows 7 install disc for both 32 and 64. Now, backing up all my qaqa on 4.7 GB dvd discs would be a hassle, and that would be what I'm looking at because there is only one hard drive. My question: What are the downsides to just installing Windows 7 64 bit over Windows XP 64 bit, rather than backup files -> reformat -> clean install?
View 2 Replies View RelatedI recently got a new computer, built it from the ground up for gaming. My school is part of MSDNAA fun time so I was able to get a free version of Windows 7 64bit service pack 1. I downloaded the files and it was an .iso file.
The first try, I ended up burning the .iso file its self to a disk with out mounting it then downloading the files onto the disk that way. So that didn't work.
The next thing I tried was downloading the actual files needed to install the OS onto a flash drive. The reason that didn't work was because I didn't format the flash drive correctly before I downloaded the files onto it. I then tried to format the flash drive but now I can't even open it or do anything else with it.
I ended up asking a friend who had a boot disk for Windows 7. The only problem is that he didn't know if it was 32 bit or 64. This disk actually worked... the only problem is that it's 32 bit.
I ended up getting another disk and downloaded the, what I believe, right files onto it. Popped it into my new computer to hopefully install the 64 bit version of the OS and over right the 32 bit version, or have it reformat my hard drive then install the OS. So far it isn't working.
Is there any advice I could get from you guys. I was thinking about wiping my hard drive and starting from scratch, hoping that the 64 bit disk I burned would work. So far, I haven't been able to actually wipe it, so I'm at a bit of a cross roads.
I am currently running Windows 7 Home Premium on a basic HD. I recently purchased a new SSD and a full installation of Windows Ultimate.
I would like to install Windows Ultimate to the SSD and use my old HD as a secondary storage device. Most importantly, I do not want to lose any of my documents or personal files currently stored on the old HD.
I'm looking for advice or recommendations on the best approach here. Should I do a full Win7 Ultimate install to the SSD and leave Win7 Home Premium on the secondary drive? Or, is there a better way to migrate files from the secondary drive to the new SSD and then format the old HD?
My machine (a very powerful 64bit one) wouldnt let me update from XP Professional to Windows 7 64 bit, but would allow me to update (clean install) to 32 bit. Now 32 is in can I upgrade to 64?
View 6 Replies View RelatedI was looking up previous topics regarding upgrading to Windows 7 and was not really finding any definitive answers. I have been perfectly happy and content with Windows XP Home Edition SP3 and have been flirting with the idea of upgrading to Windows 7What brought me to this was I want to install and play Battlefield 3 which only runs on Windows 7. I have a nice system even by today's standards, so I ran the Microsoft's upgrade to Windows 7 app checker. It told me that most programs would be fine but there are some like K-lite's Codec Pack and such that it is unclear if there is compatability. Now I am not going to backup data, clean install Windows 7, and reinstall all programs and apps just to play one game.
View 5 Replies View RelatedMy pc is old.500gb space, 2gb ram.Tired of xp, I want to upgrade to win7 ultimate. I have original cd.One of the reasons im doing this is becoz, I'm a gamer and lot of new games are not supporting win xp anymore.
1. How to do it?
2. I have 180gb worth data on pc, is it possible to recover/keep data as it is without transferring it somewhere else (I have 4 drives)
3. can i have xp on 1 drive and win7 on other?
4. I dont know which version I have, I think its 32bit. My xp is also 32bit , does it matter?
5. I have all installation cd's, everything. what else do i need?
6. How to connect to internet in win7. I have win7 on my laptop and I dunno how to.
7. my Dvd drive is not working properly , my sis has win 7 in usb , can win 7 be installed from usb?
I am new to this forum, I was a Desktop/Network engineer (before Windows 7 came out).I would like to hear any tips or tricks on upgrading from 32 to 64. I know you have to completely reformat ETc. To give you a slight heads up my HDD is already partitioned and its a new notebook 8MB fitted Ramm (but obviously only 2 MB being utilized (careful choice of words there!) I am currently checking first my hardware drivers to make sure there compatible
View 4 Replies View RelatedI have a winfast k8m890m2ma-rs2h motherboard and i want to upgrade my ram to 4 gig.
I dont know if i am able to though, because the infomation on the box and in the manuel doesnt tell me how much ram the motherboard can support. It is an am2 socket board but no where does it say the amount of ram it supports.
I was woundering if anyone has this board and/or knows how much ram this motherboard can support?
