IO Shield Is Routing Noise Through Computer Speakers
Jan 15, 2012
For some reason I only receive interference through my speakers when my IO shield is installed. I've tried aligning the tabs to contact the motherboard connections, but that generates a lot of noise through the speakers. I tested it outside of the case and installed in the case (without the IO shield) and there was zero noise. Isn't my IO shield supposed to prevent this? So, I have the shield installed, and of course there is still a miniscule, but annoying amount of noise through the speakers. It's definitely the IO shield!Drivers are all current, mic and line in are muted.
-Antec 1200 V3
-Antec 850Watt CP 850
-MSI p67a-g45 (B3) (Using on
board audio)
-EVGA 560 TI Superclocked
Just the other day I noticed when I was watching a movie on my computer with my headphones on then muted the sound I heard heavy static. I also have a Logitech mic that I just bought recently and when I played back my voice via from Audacity, all I heard was constant static noise. Are my speakers going out? Or do I need to update my sound card/driver? If so, what kind for a Windows 7 64 bit would I need to download?
I am really stuck, basically what is happening is I am getting a crackling noise from my speakers and headphones on windows 7, it is not my sound card as I use a separate usb card for the headphones meaning this cant be a problem with the drivers as they are both using different ones right? Windows 7 was basically my version of vista, vista worked perfectly for me, I just don't know what is going on and it has me annoyed as i invest a lot in my audio just to have the os crap on it.
I bought this speakers a while ago for my older computer and recently i bought this new hp so im using them on my new hp desktop and ever since i bought the speakers they have allways made this high pitched noise .Now my HDD makes the same high pitched noise but not as loud as my speakers make it i feel like the speakers are just transmitting the sound tha the HDD is making but just alot louder?
my hp 6730 b laptop charger was beeping and eventually stopped working i replaced it with a loaner ..The loaner is a original hp charger but has less power volts are .5 off but the original had 90 watts the loaner has only 65 watts...it charges the bat to 100 percent..although i noticed the lightning bolt led is not staying blue like it was...it goes to amber at 60 percent charge and then blue like itshould somewere working up to full charge then it goes off..it used to stay blue.. i dont leave it plugged in at night..i figure i better not..NOW 3 DAYS LATER MY LAPTOP CRASHED TWICE AND BUZZED... NO SCREEN ...FAN GOING AND LEDS BLINKING...it would not shut down from power off on button....so i umplugged the charger and pulled the batt out...put batt back in and it said windows did nor shut down correctly..hit enter and it rebooted fine...how serious is underpowering a devise..in general i always thought under was ok within reason over was bad.?? im buying the original 90 watt hp block today...
So a few weeks ago I was in Sony Vegas editing a video and suddenly my mouse and keyboard both became unresponsive and a loud buzzing noise started coming out of my speakers. I left it for a few minutes but nothing happened, there was no blue screen of death, no error message,nothing. so the only thing I could do was force a restart.
Over the next few days the problem continued in graphical/CPU intensive programs (such as photoshop, Vegas, fsx, etc), and all I could do was restart. Not once did I see an error message. I did originally think that it was due to an overclocking (4.4 GHz) however I checked my temperatures and they didn't ever peak above 60-70.Neverthelss, I underclocked back to 3.3 but still experienced the problem. I read online that I should do a clean install of windows so I did that, and up until now I thought the problem was solved. And a couple of minutes ago I was playing age of empires and the computer froze and then The buzzing started again.
For the last week now my computer has been making a humming sounds that progressively gets louder. The strange thing is if I press my hand firmly on the side of the case the humming stops for a short time.
A week ago everything was running fine 3,4 days ago i notice that it is making much more noise than it should. It seems that it is CPU's fan's noise.Most probably dust is responsible for this.there is a lot of dust inside my CPU. This may hamper hardware badly(as i have seen in some websites). What should i do? can i solve this by my self or i need to go to computer repair shop.one argument that this sound is not of fan is that, If it is sound of fan then it should start blowing very fast with noise after opening computer for long time since it blows when processor warms. But one can say that fan is not in well working state so that's why it is making this much sound, After all these are my arguments.
I installed external speakers on windows 7, now when I wake up computer from sleep mode I get one loud pop, I never heard it before I installed speakers.
I have a windows 7 ultimate machine that connects wirelessly with my router (192.168.1.x) and is also connected through wired lan (192.168.137.x) to a switch. The Windows 7 has ICS enabled in order to give internet access to the machines. My problem is that I cannot ping from the rest of the wireless devices (192.168.1.x) any of the wired devices (192.168.137.x).I have added a route to my router to route packets to the 192.168.1.6 (which is the wireless interface of the Windows 7 machine) but the Windows 7 doesn't send the packets to the other interface.
This is the result from the traceroute
1 192.168.1.1 (192.168.1.1) 4.773 ms 1.230 ms 1.268 ms 2 192.168.1.6 (192.168.1.6) 2.152 ms * 8.476 ms 3 * * * 4 *^C
ATT recently provided me a gateway modem. It has wireless, but no routing. Any way I can RDP into the only machine physically connected to that gateway without intoducing a router and setting up the gayway for passthrough?
I have 2 PCI lancard in my PC. one is connected to internet and the other is a wireless NIC. I like to route my internet connection from the LAN card to the wireless card, so that it acts as wireless router and I get the internet in my other devices(mobile and tablet PC). How can I do this.
I am using a netgear DG834GT router however having just bought a computer running on windows 7 I am having real connectivity problems, other laptops in the household are on XP and have no problem, is there an answer out there?
I bought a new computer tower last night it came with keyboard and mouse im using my old montor and speakers till i can afford new olds The speakers work but the sound is extremly low and i have it maxed out My old computer was about 5 years old, Do need powered speakers/
I've loaded Windows 7 and Office 2003 on my desktop. However whenever I try to Route Recipient from Word it start by giving me a message that says.A program is strying to access e-mail addresses you have stored in Outlook. Do you want to allow this? If this is unexpected, it may be a virus and you should choose "No".I respond to Allow access and then choose a recipient from my address book to send to only to receive this message.General mail failure. Close Microsoft Office Word, restart the mail system and try again. I've tried closing word and Outlook and restarting them with no success. I've researched and found this problem when Vista was first released but the registry entry fixes identified as work arounds there don't work. how we can still use the routing recipient in Word 2003 while in Window 7.
I get the following error. "The peripheral does not appear to be plugged in"
I've updated the driver and it says the realtek device is working fine. Sound worked just fine on this computer but then stopped. I do not have external speakers.
As the title says, if I turn my computer off, wait for every hard drive to stop spinning, then turn my subwoofer off at the switch on the back (not stand by mode) it will turn the computer back on again...I thought it was some kind of WOL or something, but i've turned all that off and it still keeps waking it up
Got some speakers for my PC and they make an annoying whistling sound and when my PC makes a noise like a disk whirring it is amplified through the speakers.Also, when I scroll up and down a webpage for example it makes extra noises.
I was watching a movie on my computer and I couldn't hear the voices but the music was loud and the volume was all the way up. Do you know how to make it louder so I can hear the voices?
my computer speakers connected to my computer are no longer working.they are turned on to full volumn but there is no sound.checked connection.it is ok but can't get sound.
As of just lately my volume on speakers,[ free standing ] has diminished by about 65%. How do I make them louder as the volume knob is as high as it will go.
I am unable to run any program in my accessories folder as run as administrator located on my desktop from the Start menu-Accessories. However if i go through windows explorer on my hard drive i am able to run as administrator any program in the accessories folder and the UAC shield is present. Why am I unable to run as administrator from the accessories folder in the start menu from my desktop. I noticed the UAC shield is missing next to run as administrator when I right click a program for options. This is only in the start menu-accessories folder from my desktop. When I right click a program in the accessories folder and select run as administrator I get this message. This file does not have a program associated with it for performing this action Please install a program or if one already installed create an association in the default programs control panel. This does not happen from the hard drive.I tried and copied a shortcut example the command prompt which has the uac shield next to run as administrator option. When I move it to the accessories folder that is in the start menu on task bar I noticed that when i right click the uac shield disappears and unable to run as administrator. Not sure why it is happening from my start menu on my desktop. Other programs in the start menu have the UAC shield next to run as administrator when I right click the program. Does anyone know why the UAC shield is missing next to run as administrator on programs in the accessories folder (only from the start Menu) and not on the accessories folder on the hard drive and how do I fix this
My son (I have got him to join up) has a custom self made build he does a bit of gaming on and had this annoying error pop up on boot # -5 and it went into a larger screen etc on. We managed to disable it in misconfig now as it wasn't an OS app does it matter that it doesn't run because all I could find was it just checked for software updates and as most of our favourites do this anyway - is it worth getting it back on again.?
Ive been with this problem for a while, my computer freeze and the speakers start making weird noises. I have a log of the error but I dont know how log things work, this one is from the security tab
The audio from my computer completely went dead when I turned it on. The speaker icon shows the symbol with the 'X' on it and after clicking it and going through the troubleshooter it can detect no problem. I tried updating the drivers through the HP website, and uninstall/reinstalled them but it still doesn't work. I even tried rolling back the computer to a restore point but that didn't work either.
The speakers are built into my monitor and is connected through a normal audio jack (not HDMI). I normally use my headphones through a jack built into the front of the tower.My computer is a hp Pavillion Elite m9400f, Windows 7 Ultimate 64X (It also has a ATI HD Radeon 5770 graphics card; but I'm not sure if it's relevant to what might be causing this problem).
