I have windows 7 ultimate 32 bitI use Samsun 16" Wide; When i run a program, it's like a flash,it appears that some parts of it are not shown, and it shows an errorHere's the error:" ERROR Control Panel/Display/Appearance/Display SchemeThis computer is set to display abnormally large window borders and window controls.Please reset this to a "Windows Standard" scheme. "I think everything is because of this wide thing, but what can i do?
I am still kid at heart. I like eye candy. I have W7 home prem. I wish it had that Pan and Zoom Screensaver that Vista had. Is there a way to copy the Pan n Zoom from Vista and insert it into 7?
a few months ago I called dell to have something on my computer fixed (I don't remember what it actually was). The dell rep remotely took over the computer and cleared out a bunch of the programs from startup in various locations. Since then I have not been able to use the scroll and multi-touch features on my mousepad. I can't find where to turn this back on and re-installing the driver has not helped.
I use a Hitachi plasma screen with a native resolution of 1024x1024 to watch TV via Media Centre and with the recommended output resolution at 1024x768 via VGA. As would be expected, this results in black bars top and bottom so I have to use Zoom 3 setting which corrects it nicely. The picture quality is excellent.
The problem is that when I change channels a few times, it reverts back to the default Zoom 1 so I have to manually change it back again using the info/zoom menu. This applies to HD & SD digital channels.
Is there some way I can get the zoom setting to stick? It's a real nuisance otherwise and ruining the setup.
I reported this problem on the beta and hoped that it would be fixed by now in the RC.
I have a widescreen Hitachi plasma with a native resolution of 1024x1024. My HTPC is connected via VGA using 1368x1024 resolution through an ATI Radeon 4670 card which gives really excellent picture quality for live TV (with a few tweaks!). MC displays correctly full screen but I need to set it to Zoom 3 for live TV to remove the black bars top and bottom and fill the screen correctly for 16:9 aspect ratio.
The problem is that this setting will not stick and randomly changes back to Zoom 1 when I change channels. Sometimes it works and sometimes not regardless of content. Sometimes I can just see the picture change zoom an instant before the channel changes.
This is definitely a windows problem and not related to the graphics driver. I have used the driver automatically installed by Windows 7 and updated to Catalyst 9.4 with exactly the same results. WMP remembers the zoom correctly for DVD playback.
I have an identical setup running under Vista MC and the zoom, once set, always remains the same (Zoom 3).
Is there a way of making this setting stick as it should remain the default for all my TV viewing and I could not live with having to change zoom every other time I change channels? Any help would be much appreciated as without a solution I would not be able to adopt Windows 7 which would be a great shame considering all its other improvements over Vista.
I know about the option to automatically reset it whenever a new tab opens (found in the advanced tab in IE options), and I know that this is based off of what option is set in the "Ease of Access" control panel. The thing is, is that this is on a laptop, so I like all my icons and text outside of IE to be at 125%, but flash is messed up in IE if it isn't set to 100%. Also, every once in a while I discover that I have accidentally changed my zoom factor by hitting control+scroll (just a guess this is how it changes), and would like to avoid this.
I was testing out whether using the optical zoom on my camera is better than manually zooming a picture in Photoshop. As a complete newbie, what are the basics on how to zoom and crop and not lose my 4288x2416 resolution?
I just purchased a new canon 60 d and I loaded the new software that came the camera, and the zoombrowser keeps saying not responding ,or is very slow to respond, my computer software is windows 7 ultimate
Recently purchased an Acer 5733. Why will my new higher zoom setting not remain as such, until I wish to reset. It seems erratic from one web page to another, and often automatically returns to 100%. Sometimes when I return to previous viewed web pages, the higher setting will have remained. If I set at 125% I want it to stay there!!
i am on a webpage, any webpage, and as i'm looking at the page it can slowly or quickly get smaller and smaller. my zoom will go from my normal 125% setting down to 12%. i reset the zoom and it happens again. this has been an interrmittent problem for the past few weeks. i use IE9. tonight i downloaded firefox to see if the problem would appear there also. it did. so i do think it's a windows is there some way to lock the zoom? what is causing this? my computer is set to download windows updates automatically (not the optional ones).i don't know if it's related, but at times the icons on my desktop get small. when i check i see that it is set to small icons. i change it back to medium icons, and it goes back to small icons. this also is intermittent, and sometimes seems to coincide with the webpage zoom issue, but not always.i sometimes lose my hot key settings for my wireless keyboard. for example, i hite the hot key for mail and nothing happens. this also is an intermittent issue that sometimes coincides with the other issues and sometimes does not.
I wish to totally remove the CTRL & Mouse Wheel/Scroll facility from all applications. I am aware you can do this in some programs individually, but sadly not all have this facility.My Logitech MX Performance mouse is amazing, especially the free-wheel!! Sadly the majority of programs I use do not appreciate this feature, especially when using CTRL & C to, oh wait, your not copying, your magnifying to 300%...
I changed computers and so I had to download new drivers for my printer as well as my Powershot Pro1 which included ZoomBrowser. For RAW shots, in order to manipulate the photo, it has to be converted. No problem before. Now, there is no link to do the conversion under Edit, which is where it was and where I found info on line where it should be.
My wife has a Sony Vaio laptop running Windows 7. I was using it and reading tips on how to make it run better on the performance tips on the control panel when without warning the screen went to black and reappeared with the desktop now aligned 45% clockwise in a few seconds the screen went to black again and the desktop screen reappeared again but this time re-aligned 45% anti-clockwise, ( the top of the page on the right hand side and the bottom of the page on the left side.
Still concerned about my intermittent start up problem.
Seems to be pretty good now.
Has started the last few days, several times, with no problems.
Hope it stays that way.
If you have a reasonably new HP desktop, would like to ask though:
On startups, do you momentarily see that blue screen with the HP logo and the six or so F key options flash on for about 1/2 second or so ? If so, always ?
My understanding is that this screen is Not the infamous BSOD, and "might" be normal during startups ?
Do you think this quick flashing of during the start process is "normal" ?
desktop screen gets stuck after 2-3 minutes from Booting up, the mouse doesn't move and the Key board doesn't respond.... I have to keep on rebooting the system to get it to work again..
My desktop screen never opens up. The computer just keeps thinking about it. Apparently a program is trying to load. How do I find out what it is or get it to load. Everything else works fine. I can go on the internet from the start menu by clicking on that icon.
When I use my scanner it reinstalls everytime. I tried to uninstall it and reload it with the disk I get an error saying another program is trying to install, try again later. I have a feeling maybe the scanner is the problem, but I don't know what program it is that is trying to install. Has anyone else had this problem?
Please look at the attached screenshot for details. I've tried restarting the computer and doing a virus scan - didn't work. How do I get this desktop back to normal?
i have is that my win7 machine is hooked up to my TV and i want to remote control it with my laptop while still viewing it on my tv. I can remote control it with my laptop but all i see is is the login screen on my tv. I'm just wondering if its possible to view the screen on the client machine while its being controlled via Windows Remote Desktop or do i have to use third party software to accomplish this?
I'm getting an inconsistant BSOD just after my desktop loads from a bootup. Meaning, sometimes it BSODs and sometimes not. I read the minidump everytime and it shows the same information. This is what it shows.
PAGE_FAULT_IN_NONPAGED_AREA
Caused by driver: win32k.sys Caused by address: win32k.sys+2517af Crash address: ntoskrnl.exe+7cc40
I just ran a Chkdsk /r but nothing was found. I'm thinking it may be a memory error?
I have a Sony Vaio all-in-one destop with a dim screen, I can barely see what's there, if I put it to sleep and then come back the screen lights up for about 5 seconds and then goes dim again. Tried restarting but it does the same thing, just looking for some suggestions, it's out of warranty.
For the past few weeks I have noticed my laptop becoming slower and slower. As of a few days ago it has been ridiculously slow and is sometimes unresponsive to commands or keyboard. It used to go straight to a black screen with only the cursor after start up but now sometimes starts up, although very slow. Now my desktop started doing it too. I don't know what's going on with them. I had not had any virus protection for a while and recently installed webroot complete 2012 on both of them and scanned, finding nothing. My desktop sometimes loads into safe mode when I tell it to, however it still is extremely slow, SAme with he laptop. And if I try to start up the desktop on normal is stays on black screen. I have noticed that sometimes I will get the "Microsoft windows isn't responding" pop up. My control alt delete doesn't work on either of them either, it pos up suing something like " the control alt delete function could not be started blah blah blah".
I have tried shutting it down, when I turn it back on it goes straight to that screen again, no startup or anything. I tried shutting off and unplugging. Turns on straight to blue intel desktop screen again. Tried shutting down, unplugging, pressing power again to make sure it's off. Same thing.
Tried CTRL ALT DELETE, no response. Tried throwing keyboard...nothing...
But why would it stay on this screen even after shut down and unplud for more then 30 seconds? More than a minute?
It is like it was never turned off, and it gives me no options to boot from my backup drive or F8. just turns on to blue intel screen? Running windows 7...
Scenario is. Activated Windows 7 N Ultimate as host machine (in other room) Activated Windows 7 Ultimate as client machine, am using it now.
If I remote desktop in after logging in locally on the host, I get the black screen for approx 2 minutes at which point it closes with an error. If I remote desktop in whilst the host is logged out I can connect and log in fine. If I detach from a running remote desktop session and try to relogin again, I get the black screen sympton again and have to logout locally on the host to be able to login again on remote desktop. If I try to login locally on the host whilst the black screen is up here I get rejected due to remote desktop service been busy. I have to wait for the window to close.
