Currently I am using windows 7 ultimate 64 bit on my pc :
core i3-2100
msi h67 motherboard
6 GB g skill ram
msi 5770
wd caviar blue 1TB
My problem is my boot partition is only 100 GB, so I put other applications than windows to another drive? So does it actually any correlation between the boot time and me installing other application to another drive than the boot C. I want to try ssd, but it actually quite expensive. So I might want to but another hard drive just to put all the application.
So, I have a Windows 7 Laptop and XP, I would know to know how to Improve the boot speed time Is there anytime to speed it up or any tweaks or Registry Edits? My computer does not have any maleware or spyware Has 2GB RAM
Things I have done
Defraged HDD Deleated Unwanted Programs Went > Msconfig> startup > got rid of extra start up items Went > Msconfig> Services > took of unwanted services
I tried something New which is really good which works helped improved speed by 10 seconds
Went > Msconfig> boot > checked No Gui boot Went > Msconfig> boot > advance options > number of processors changed it to 2 ( has made a difference) What else can i do? to make it even faster and cut down on the time? What does this option do/mean Went > Msconfig> boot > advance options > Maximum memory
I have a hp compaq nc6320, Intel core 2 1.66GHz with 4GB RAM running windows 7 ultimate 64bit. I've just done a fresh install and installed all updates and now it seems to take ages (around 5 minutes) to boot in to windows to a point where I can open a browser or program etc. Is this just because of all the updates, as before I applied them it was a much quicker process booting into windows? Anything I can do to speed things up a little?
I just reinstalled Windows to clear any potential programs or anything else that would slow my computer down. My OS is installed on a Samsung 470 series SSD(128 GB). If it matters, there are 62 GB free. Anyway, from clicking "restart" until I was prompted to type my password, it took 58 seconds. Is there any way to speed this up? I'm not necessarily that impatient; I just like to tweak things if I can.
I have a problem with the speed of my mapped network drive. At first al is wel and file loading is as fast as to be expected. But after some time the transfer speed drops dramaticaly and it becomes very slow. I tested it primaraly with loading of image sequences, but it affects all file loading the same. If I logoff and login to windows again the speed is back to its full potential. And then after some time again it drops. I have seached the internet for similar ploblems, but could not find this kind of problem, only the dropping of the connection entirely, but thats not the case here.
All user PC's that have the network drive mapped are windows7 Pro PC's with gigabit lan. The server PC is also windows7 with quad gigabit lan, teamed to 1 connection. A 4 ssd raid setup via a MSI megaRaid controller provides the drive for mapping. The switch is a HP proCurve 1810G-24. Jumbo frames is disabled on all devices. Because i have no domain, the password protection for file sharing on the server is disabled, so al user PC's can connect to the mapped network drive with their own username.
Is there some sort of idle timer on the mapped network drive that could be responsible or something?
Is there any way to speed up the time it takes to close the preview window? By default, it takes about 1.5 seconds for the window to close after moving the mouse off of the icon or preview pane.Turning off taskbar animations in the "visual effects" does not shorten the time. It just takes away the animation, but, it still takes about 1.5 seconds for the preview to go away.
is there any software application that can boost my boot time? certain laptops have it like in Lenovo.. do you think I can have the same in my Acer laptop?
i just recently built a new gaming rig and am running an SSD for boot up.
Everything turns out just fine except when after the windows logo appears, I can hear a little crackle noise from my headphone then the monitor loses signal and my g15 keyboard LCD turns off, then a few moments later my monitor and keyboard comes back to normal and i am a the login screen. It is not a big deal but am just puzzled at why it would do this.
It does slow down my boot speed by a lot especially for an SSD. Anyone know how i can speed this up? Someone told me disable USB 3.0 to speed things up. Any problems with Asrock MOBO drivers that could affect this?
I have two harddrives, the primary one 584 GB, the secondary one 1.36 TB. When booting, my computer takes about a minute or two to fully load, but if I start to actually use it, virtually all programs will move slowly, consume lots of memory, explorer windows will take forever to load, and even cause my video card to stutter a bit.
A while ago, I unplugged the secondary drive, and found that my computer booted up much faster, and was infinitely more stable soon after loading.
But with two harddrives, in order to maintain stability, I often wait up to 5 - 10 minutes after booting to the desktop, just to be safe.
Is this a normal symptom of having two huge harddrives, both of which are filled with about 500 GB each, and programs like Norton security suite and messenger programs all needing to boot up? Or is this a problem with the second harddrive?
I just want to be able to increase the speed of my fans beyond their spec, and have complete manual control over their RPMs without a care about the temps. I have a liquid cooling setup and the fans on my radiator as they are right now simply aren't cutting it. I have them hooked up to the motherboard in hopes of finding something to just boost their speed via software, but SpeedFan is the only thing I could find and it simply sucks for that purpose.
I just got a HP desktop with Window 7 pre-installed, however, it took about 10 minutes for the starting up the computer. Is it reasonable for Window 7 operating system or there is somethnig wrong with it? If Yes, how can I fix it/them?
got Windows 7 up and runnin�for a while now , but I am noticing that my boot time is quite long, at least, that how it feels to me. I�ve got a pretty strong laptop, so 80 seconds or even 2 minutes at a certain point to boot up seems strange, right? And this is when I've got almost no software installed, it's still mostly a clean laptophen I did the clean install, I had to convert the disk from GPT to MBR,otherwise I could not have installed Windows. Is it because this conversion that my boot time has increased? My laptop supports UEFI, and UEFI needs GPT in order to work.
As I'm trying to turn it back on, it has taken literally 40 minutes to get past the MSI splash screen. It takes a full 8 hours (no I am not kidding, nor exaggerating!) to get into Windows 7. And even then, everything is slow. Not like a normal P4/1GB ram (because I have a machine like that that is faster!) slow, but like low framerate slow. Same with the bootup. The huge MSI logo splash screen looks like I'm trying to download an image via dial up, and loads 1/5 of it at a time, over a period of nearly an hour. This process used to be so fast that I could hardly read it.
I use a Compaq Presario AY655AA ACJ CQ3220IX with the following configuration:
Processor: Pentium(R) Dual-Core CPU E5400 @ 2.70GHz HDD Model: WDC WD3200AAJS-60M0A1 Drive Capacity: 305,245 MBytes (320 GB) Total Memory Size: 3 GB DDR3 Video Chipset: Intel GMA 4500(M)(HD) Video Card: Intel G41 Chipset - Integrated Graphics 0 [A3] [Hewlett-Packard] CD Drive Model: hp DVD A DH16AAL Monitor: 18.5 inch TFT Compaq W185q Motherboard Model: FOXCONN ETON Motherboard Chipset: Intel G41 (Eaglelake) + ICH7 USB Version Supported: v2.0 Audio Adapter: Intel 82801GB ICH7 - High Definition Audio [A1]
I have Windows 7 Ultimate x64 installed in this computer. It worked just fine for about one year. It normally took 30 seconds to boot up. But now I'm experiencing unexpected slow bootup of windows. Now it takes about 2 minutes 20 sec. I've tried removing some of the start up programs and also tried scanning with Guardian antivirus by Quick Heal, but it showed my PC clean of viruses. What should I do to solve my problem?
I usually have to boot my machine twice. I boot the first time, log into my (domain) account, and once windows loads, I get a BSOD. After that, if I reboot, the system works all day.
This happens if I'm bringing it out of sleep or hibernate too, but it has to be inactive for a few hours for it to give a BSOD.
I am running a Dell Latitude D620. Windows 7 Pro 32 bit (fully licensed) 4 GB RAM Intel T2500 2.00 GHz processor Joined to a domain
i can change boot time in system properties or in msconfig but the time not changing in boot manager list it stays on 30 sec whatever i change it. i have dual boot win 7 and vista. please help me fix that.
My Windows 7 PC is in "Hibernate" most of the time and I rarely restart it. I would like to do what most people are trying to avoid: I would LIKE TO have a chkdsk run on all drives every time I boot. Is there an easy way to do this? Further, might there be any way to distinguish between "this chkdsk is being run because you want it run every time" vs. "the chkdsk is being run because the dirty bit is set (you had a problem)"?
No updates or new applications installed, but recently boot time has about doubled, with the longest stretch during the amber (yellow) monitor light on and blank screen after Windows Starting and before the blue splash screen.
OS Name: Microsoft Windows 7 Ultimate Version: 6.1.7600 Service Pack 1 Build 7600 Other OS Description: Not Available OS Manufacturer: Microsoft Corporation System Name: KOKUA System Manufacturer: System manufacturer System Model: System Product Name System Type: X86-based PC Processor: AMD Phenom(tm) II X4 965 Processor, 3400 Mhz, 4 Core(s), 4 Logical Processor(s) BIOS Version/Date: American Megatrends Inc. 1005, 8/24/2010 SMBIOS Version: 2.6 Windows Directory: D:Windows System Directory: D:Windowssystem32 Boot Device: DeviceHarddiskVolume1 Locale: United States Hardware Abstraction Layer Version = "6.1.7601.17514" Time Zone: Hawaiian Standard Time Installed Physical Memory (RAM) 8.00 GB Total Physical Memory 8.00 GB Available Physical Memory 6.48 GB Total Virtual Memory 12.3 GB Available Virtual Memory 10.8 GB Page File Space 4.30 GB Page File D:pagefile.sys
I have been at this for about 3-4 hours trying to decrease the boot time of my computer I was able to get it from 10 minutes down to 5-6.I biggest thing I noticed is the time between the Windows animated boot screen and the actually blue login screen just shows a black screen about about 2 minutes or so. Anything I can do to decrease this? Logs, etc?
I have a spare pc with Windows 7 64bit professional (no SP1) on a ssd which I bought a year ago. Back then, it booted within 20sec or so. I noticed a slower boot time after the SP1 patch. So I assumed the patch slows the PC and so I went on with my life.
Now that I bought a new PC with a Windows 7 SP1 64bit professional DVD, I expected to have a slower boot time since SP1 was already added on the DVD. But to my surprise, it booted just as fast, around 17 sec on a fresh install. I rebooted and got the same 17 sec. Next, I updated the recommended patches. I did not install anything else that was optional, any MB drivers, GPU drivers, etc. Just plain recommended windows updates. Boot time went from 17 to 46 seconds. How can that be? If patches slow PCs, then the new DVD should have done so from the beginning.
