I primarily use two desktops for my work in my house. They both access the same Internet via ethernet cords, and they are always on. I often switch between the two desktops, which means I have I re-open all my programs.
I want both desktops to share everything they do(something I open on one computer opens remotely on the other).
How can this be done? I am open to any software(ie:both desktops also have Linux)
Is there a way to remotely control a PC through a wifi or ethernet cabled TV (so I can use the TV as a remote monitor w/speakers to stream internet videos, check mail and surf the net?Have PC's, newer wifi enabled TVs and Apple TV & know how I can use the Apple TV box see/listen to iTunes content on my TV, but I what to have access to my PC through the TV.Should think this was a piece of cake - but I just don't see any solutions out there?(I can use a fixed Ethernet cable if needed, but I already have very strong wifi signal everywhere.)
View 9 Replies View RelatedBeing able to remotely control your computer is an age old geek trick. But what about changing BIOS settings or installing an operating system remotely? With Intel AMT KMS this is within reach for any geek with the right hardware. Intel vPro is a management platform built into Intel processors and other hardware that allows companies to manage their desktops and laptops out-of-band (OOB). That means the computers can be managed no matter if the computer in on or off, and even if the operating system has failed or there is no hard drive present. With Core processors Intel introduced Active Management Technology (AMT) 6.0 which introduced a slew of new features including Keyboard Video Mouse (KVM) Remote Control. This means that with the right hardware configuration you have full remote access to your computer no matter what state it�s in. Most geeks are familiar with VNC software that runs inside your operating system, but Intel AMT KVM runs at a hardware level which allows you to go remote with your computer in the case of a total system failure or even without an operating system installed. Let�s get started and set up Intel AMT KVM so you can go remote with your computer.
View 5 Replies View Relatedhow do you control two computers with one keyboard
View 2 Replies View RelatedI've seen this somewhere, but I can't for the life of me find it again. There is a way of setting only certain remotes to work with certain PCs so they don't interfere with others. I have my HTPC and laptop in the same room, both with IR receivers - whenever I use the remote for my PC, the laptop ends up with all the signals too, and I come back to find it's playing a video or something.
Does anyone here know where that tutorial/registry setting is to change remote control channels?
How can I shut down the remote computer after the Remote Desktop connection was made? "On the computer from which you want to shut down the remote computer, open a command window ("cmd.exe" in the Search box). At the command prompt, type "shutdown /i"to display the Remote Shutdown dialog box. Where it says, "What do you want these computers to do?" select Shut down (or you can select Restart if you want it to restart). Type at least one character in the text box for a comment/reason. Click OK." When I tried the above, the "OK" in the dialogue was greyed.
View 5 Replies View RelatedHow can I make my built in webcam shared over the network?
View 3 Replies View RelatedI've maxed out my machines RAM and I'm running out of ram at times and hitting hard drive I/O bottle necks. I'm running a setup with 3 monitors on a 2.7Ghz i7 with 16GB of RAM. I'm thinking I could setup another computer, connect to it over the network and have something setup so that much of the time one of my monitors is a remote connection to that computer. Basically giving me the power of another full computer at my same workstation without having to have another physical computer / keyboard / mouse here. I'm going to test the setup with Team Viewer and see how that works to operate a second computer on my network.
View 1 Replies View RelatedIn the interests of "Energy conservation" is there any sort of device that I could use to remotely power on a computer.
I like to have a home server running - but these days with all the beefed up hardware we could be talking of 200 - 300 watts running all day and night when I'm only logged on for maybe 30 mins a day.
If you take the number of people these days leaving computers running all the time thats a HUGE amount of "Wasted" energy to say nothing of adding to your electricity bills.
There must be some engineer out there who could design a really SMALL device which is connected to your router. When you accessed this it could power on your machine. This device would say consume only 5 watts or so -- still not zero but a HUGE improvement over having the computer powered on all the time.
Mind you these days in W. Europe - at least outside Germany whoever does Engineering anymore unfortunately. - A device like this however could make you HUGE bucks though.
My issue is that I am trying to Remotely Login to several computers that are in various locations, and then have these remote compters VPN to other networks so they can process some data. I can connect to the computers remotely jsut fine. I am also using NCP secure client to VPN to the works network. However the NCP session on the remote computers say they are connected, when I try to connect wiht my oracle client to the server I get an ora-12154 error as if there is no vpn session to my works network.
My machines are all Windows 7 64 or 32 bit. They all are connecting to the network using NCP client. I am remotely logging in to them using LogMeIn.com (Also tried the windows remote session).
My laptop connects to my desktop wirelessly allowing me to watch stuff stored on it and do other things. Recently, I started using the power settings so that after 30 minutes the computer goes into one of the sleep modes at which time access is shut off to the laptop. Is there anyway the laptop can prevent the power settings from taking effect when it is already connected?
View 1 Replies View RelatedI have a classroom that we need to log in as a local admin (the exam software needs administrator privelidges to work correctly) and I was wondering if anyone could come up with a solution to save me having to go to each machine and log them in indevidually.
View 3 Replies View RelatedI wonder if it is possible to administrate a Windows machine remotely over ssh now that we have the god almighty divine super mega PowerShell and everything.For example I would want to manage updates of windows, msoffice, acrobat etc over ssh or be able to make changes in the control panel at discretion using command line syntax. Security authorization should be done with an entity similar to sudo, pfexec etc.
View 2 Replies View RelatedI have a Dell Dimension with 5150 with 2 Gig of RAM installed running Win7 64-bit and has been running it a couple of years. All of a sudden now it allows one to login, but after a few seconds the screen goes black and the K/B and mouse stop responding. The power light on the monitor goes from green to amber and the PC keeps running.
If I boot the PC up and not login, it will run forever. I can remote in to the PC at this point and it works fine. The PC is mainly used by a user who remotes into if from a branch office, so that works out ok. This user comes into the office on Thursdays though and today we discovered the problem.
I can also boot the PC into safe mode and it will run forever. Only when I log in regularly at the PC does it "lock" up on me. Once that happens I have to power it off and turn it back on to get it to work again.
I checked to see if anything new was installed...nothing. I checked the latest updates installed, which was 09/20/12. I uninstalled one of the security updates to see if that had an effect...nada.
I've checked the Dell website for drivers. They of course do not show any drivers for the 5150 running Windows 7, but as I said before this PC and at least five others here at the office have been running just fine until this problem was noticed today.
I currently run windows 7 home premium on both my PC and laptop (64bit). I wish to remotely access the PC from the laptop via the home network. As home premium does not support this should I upgrade to windows 7 professional to get6 this facility or purchase seperate software?
View 3 Replies View RelatedCompany I work for just started implementing Windows 7. Since change from XP we (local IT) lost possibility to use command "runas /user:. "explorer /separate" " which we used to remotely connect to network drives which normal users dont have access to (drives with applications, updates, drivers etc.). I'm looking for a way to remotely open explorer window with admin rights. Is there a way to do so? Right mouse click + shift -> run as different user doesn't work.
View 3 Replies View Relatedi need to know where all the settings are that might shutdown/power off my PC.Already i have found and changed:
settings that power down my wireless network usb and harddrive - off
ability to power off all usb ports - off
sleep mode - off
i have made max remote access 30days. what are some other settings that may suspend or logoff or power off my pc and stop it from downloading?
How to reboot Windows 7 remotely from RDP Login Screen?
If I RDP to a system older than Windows 7 OS, the CTRL-ALT-END works on the RDP log in screen to bring up the Windows Security window to reboot. But it doesn't work for Windows 7 system! I have a Windows 7 Ultimate system that I need to restart remotely from the RDP login screen but I just can't.
I'm a newer admin to a company. Before I got here, all of the employee PC's had the users set as adimins on their assigned PC's. Now My bosses want admin rights removed from everyone, except for about 4 employees. Is there any way I can do this silently?
View 2 Replies View RelatedHow do I remotely shut down a computer via IP address in the command prompt?I've been trying the following syntax:shutdown /m 192.168.1.100 And it's not working. What am I doing wrong?
View 4 Replies View RelatedMy computer at work was upgraded this week. I am now unable to use my remote Desktop Connection. I follow the same procedure I have always used but now get a window askihg for my credentials. I enter my user name and password but then get a window stating " Your Credentials did not work ".
View 2 Replies View RelatedWhen I go to Control PanelAll Control Panel ItemsNotification Area Icons dialog then there are a lot of programs which are already uninstalled.
How can I cleanup/delete all these useless entries? How can I delete ONE single entry manually?
Second question: Assume I want to hide icons and notification for mutiple/all entries (here approx 40 items) in ONE STEP.
Third question: How can I save/backup the current notification settings (for later restore) into a file? Are these notifcation settings stored in a certain branch of the Registry (which exactly) ?
I am trying to set my monitor's screen give accurate renditions of my pictures. I use Quick Gamma to set gamma. When doing this I can use either Nvidia's controls or windows controls (right click desktop>Nvidia Control Panel. When using Nvidia's Control Panel, there are two choices: Use other applications control color settings or Use Nvidia settings. Am I correct in assuming that the former setting is Windows? I always check the button to use Nvidia settings (and then Apply>OK), but when I go back to this screen at a later time, the Other applications control color settings is always selected. I'd like to default to Nvidia.
View 3 Replies View RelatedThree Computers on a home network. Desktop in Office (Windows 7) . Wife's Laptop (Windows 7). My laptop ( Vista unfortunately). Norton Security Suite and all three. I have a network setup and a Homegroup established.
Everything was setup and working so that I could share files between all three. My wife was able to open a desktop file make changes and save it back to the desktop computer.
All of that changed. Now we get a message when trying to save the file. "You do not have permission to save in this location. Contact the administrator to obtain permission".
I have given the entire "MY Documents" sharing permission to everyone. I have checked everything. I have looked over all kinds of forums and nothing has worked.
I am to the point of doing a complete reinstall of Windows 7 on my Desktop.
I am part of a large organization that has a large amount of computers on our domain controller. I have Administrative rights to the computers only, and network access rights on our network. I keep a number of computers up to date, including various 3rd-party programs (i.e. java, flash, etc), and I currently manually remotely connect to each computer and install the updates to the programs from a network share, then run Windows update, select all the critical updates (as well as all the applicable optional updates), then disconnect and move on to the next one. Needless to say, time quickly adds up.
View 3 Replies View RelatedI'm trying to access this IE History for a remote user and I can't. I click on the Hidden folder but it won't open. I have full admin right to the box. It seems the only History folder I have access to open is my own.
I have tried under a local admin account and domain admin account and both fail. I have also tried to access on the machine and remotely still unable to open folder.
Using the following address to access the folder..
I'm Have a custom tower atm that i built. it has windows XP installed by an update disc. Due to my computers age im building a newer computer running a Phenom II X2. The problem is I'm not sure how the OS's work, haven't messed with them sense XP. I want to install Windows 7 on the new computer in 64-bit.
however I also want to install it on the older one in 32-bit, is there a disc that has both or do i have to buy one or the other. and is using the windows 7 disc on 2 different computers that belong to me against the terms of use?
i have 1 laptop with 7620 and the desktop with RTM, the issue is taht when i do
computerc$
i get the prompt saying taht i need to enter a user and password when i could do it before without entering it.
in XP having both accounts with the same name and password and some register magic solved the problem, but Windows 7 is different many aspects so i need help.
i can bypass this error by sharing all my drives but... i dont want to left my laptop with the legs open, or well turning on and off the sharing option.
the homegroup is working, though only shares what it want and i will not mess with it (too many files in both hardrives to having access to one zone of the partition).
My stepbrothers and I have been playing some games over our LAN lately. Two of us (including myself) are connected from laptops wirelessly, and the other is connected on a wired desktop. The game we had been playing is Call of Duty, patch version 1.5. All we had been doing before was one of us would create a server, and it would show up in the LAN list for the other two of us.
No set up needed, just installed and played. However, this evening we went to play again and no servers show up for the LAN. It doesn't matter who makes the server, no one else can see it. If I try to ping any other computer on the network, I get no response. If I go to the network devices, nothing shows up. However, if I go into my router I can see all devices, wired and wireless.
They just won't show up under the Windows network devices. I am running Windows 7, and the other laptop and desktop are running XP. We have made no changes to any of the systems. LAN servers just stopped showing up.
I have homegroup set up on my windows 7 (I think). I can see all my windows XP computers, but they can't see me. How do I configure my network in windows 7. The network wizard was so simple in windows XP, but I haven't been able to get it right in Vista or Windows 7.
View 5 Replies View RelatedI have two computers, a desktop and a laptop that I use when traveling, and I run Outlook on both. What I have been doing is to transfer the .pst file to a thumb drive then copy it to the other computer. The same location is used so when I boot the computer it looks for the .pst file in the same place.
My question is simple. Is this the best way to do this? Or, should I be looking for one of the cloud based emails?
How do others do this? I can't be the only one with multiple computers who wants to run Outlook on each one.