i Upgraded from win xp 32bit to Win 7 ultimate 32bit.i am upgrading my computers MoBo, Case, CPU, and CPU cooler.with all the new hardware. will i have to reformat? and if so. how do i go about doing it? Will i have to reinstall windows xp, than upgrade to windows 7. or can i just put in the win 7 cd and do it from there since its an upgrade version and not full version?
View 8 Replies
Yesterday I was trying to upgrade my Old pc from xp 32bit to 7 64 bit and it did not work. I have run upgrade advisor on it and done a backup of all my files that are on it but it will not upgrade, I have also tried to upgrade to the 32 bit version of windows 7 but it didn't work either. Here are the specs of my computer: P5Q SE2 motherboard. 6gb ddr2 ram, Pentium 4 @ 3 ghz, not sure what the graphics + sound cards are and 2 sata 3gb/s hard drives.
View 2 Replies View RelatedThe computer I am currently using is a 4 year old HP Pavillion a6430f (specs below), built to run the 32-bit version of Vista Home Premium. In May 2011, I first installed a 64-bit edition of Windows 7 Professional - some months thereafter, I began to run into repeated BSODs (unfortunately, I never wrote down the error codes). In October, I took the computer in for servicing, and was told that the hard drive failed. After it was replaced, I reconnected my computer (now running Vista again) and immeadiately (stupidly, perhaps) reinstalled my copy of Windows 7. Within several weeks, the problem resumed.I have only recently had time to get the computer serviced again, and it has been factory-reset to 32-bit Vista with another new hard drive. I don't expect my exact issue can be troubleshooted from this information, but I'd like to eliminate one of the variables. According to the system itself (information found in Control PanelSystem and MaintenancePerformance Information and ToolsView and print details), my computer is "64-bit capable". However, as I know little about hardware and the like, I ask: Could installing 64-bit Windows 7 on an originally 32-bit Windows Vista machine be causing hard drive failure/ BSOD problems?
[code] Other information: The latest hard drive that the repair shop has placed in this machine is a ~900 GB, 3.5" 7200 RPM Seagate ST1000DM 003-9YN162. The GeForce 9400 GT was also not present in the original computer (I made sure to install the correct drivers); nor was the power supply currently in it, which is around 400 watts (100 more than NewEgg's calculator said would be necessary to power the parts currently inside). I don't know if this info is too relevant, however; I am only asking whether the change of operating system is causing a negative effect.
so yesterday I decided to upgrade my computer with a new motherboard/cpu.But I wanted to keep the old hard drive since I have all my files there, and everything was going smoothly until I actually tried to boot it.When I boot Windows 7 it gives me this bluescreen error: Code: STOP 0x0000007B (0xFFFFF880009A9928, 0xFFFFFFFFC0000034, 0x0000000000000000, 0x0000000000000000) I have tried to reinstall windows on another clean hard drive, but doesn't want to boot that either.
Specs:
Power supply: The one I had in my old HP Pavillion, 460w
Motherboard: Asus M4A88T-V EVO
CPU: AMD Phenom II X4 965 BE
Hard drive: Seagate Barracuda 200GB 7200 ST3200822AS
Graphics Card: EVGA GTX 460 1gb
Windows 7 Ultimate x64 full retail The hardware is from 2010 or so.The age of the os installation is 2011.
Motherboard that I using currently is ASUS P7H55-M LX.It basically has only 2 slot. Intially I bought a 2GB ram and wanted to increase it recently. Did not thought of wasting too much on ram since I have bought it only a year ago.Hence I bought a 4GB ram and placed it in.
Here comes the issue:
After placing it, my computer keep freezing.So my question is that is it alright to mix ram size in the same motherboard?
i've just changed motherboard card, memory and cpu to the new one:gigabyte p67a-d3-b3, intel core i3 2120, patriot ddr3 2x4096mb 1600mhz cl8.0 viper xtreme divison 2 llk.i changed in bios memory to 1600mhz 8-9-8-24 1.5 v (instead of 1.65v (i couldnt find option to get it to 1.65v in bios, when i changed to 1.6v system didnt run). after 1 day i got bsod. but i changed back memory to the orginal state and after about 1 hour system just got shocked. bsod didn't show up, but computer was frozen and non stop i could hear beep sound.i didn't uninstall drivers from old motherboard (don't know how). i installed new drivers for new motherboard / cpu. i didn't install again graphic card drivers (i was told i don't need to). i didn't make format either (i'd like to avoid that as much as i can).in attachment everything you want: minidump / rammon / cpu-z / and seven forums tool logs.
edit:i'd like to add that each time computer got frozen was while i was watching something on Internet?
so i recently upgraded to windows 7 64 bit from windows Vista on my laptop. This laptop is mainly used for gaming so i was a bit surprised when i was playing a game and my computer overheated and turned off for the first time in a year of having the laptop. I checked and even games like "lord of the rings online" that pushed my GPU to about 70 degrees on vista, now pushes the gpu to 100 or more. Is there any fix for this? or is my only option to return to windows vista?
View 4 Replies View RelatedI've been having some issues since upgrading my computer to this Galaxy GTX 560 video card. My old EVGA GTX 280 did fine except I wanted to be able to run Direct X 11 and newer games on the horizon.I specifically get crashes when playing certain games. Diablo 3, Star Trek Online, Star Wars The Old Republic (seldom but still happens). The crash would usually occur less than 20 minutes of playing.I have not experienced a crash on Team Fortress 2 yet. I have played for a few hours without crashing.This is a second card, I RMA'd the first card already with the same issues.I am on Windows 7 Professional, x64.This is a upgraded installation from a clean install of Windows xp. Re-Installed Dec '11 This should be a retail version.Motherboard 2007.CPU 2010 Intel Q9550.RAM 2011 Corsair something matched pair.Hard drive 2012 Patriot Memory Pyro.I have not overclocked anything in my computer. Everything runs fine on my 280 GTX. (just a bit slower and I hear the fan churning like mad, but doesn't hard crash).I have also tried running the OCCT, however it also causes it to crash out in about 130 seconds. The crash report is generated from this.
View 1 Replies View RelatedI'm trying to ugrade from Vista to Widows 7 but keep getting the follwing message: [code] The following issues are preventing Windows from upgrading. Cancel the upgrade, complete each task, and then restart the upgrade to continue.Windows needs to be restarted so necessary changes to system files can be made before continuing.These programs might not work properly after the upgrade. We recommend uninstalling these programs before upgrading. Cancel the upgrade, open Control Panel, and search for "uninstall a program". (Note: Programs marked as * can be safely reinstalled after the upgrade.) iTunes (Please deauthorize computer prior to upgrade)I have already deauthorised it but it continues to come up.
View 2 Replies View RelatedMy computer at work was upgraded this week. I am now unable to use my remote Desktop Connection. I follow the same procedure I have always used but now get a window askihg for my credentials. I enter my user name and password but then get a window stating " Your Credentials did not work ".
View 2 Replies View RelatedI was wondering can I upgrade from windows 7 32bit to windows 7 64bit using a 64bit upgrade edition? I got told on another forum it works aslong as you input the product key AFTER the installation not during?
View 4 Replies View RelatedI am considering going to 64 bit for gaming as I believe it would be better on the games. I now have Windows 7 Pro 32 bit running. The way I understand it you need to purchase a brand new 64 bit OS. So what do I do with my 32 bit OS just trash it
View 9 Replies View Relatedtime has come to upgrade my bfg gts 250 1gb o/c! What is the best card to get in the �100-150 mark.If you look at my specs as i ant a card that will run sweet and give me good fps in skyrim!elder scrools V.(it has to be nvidia)not a fan of radeon
View 9 Replies View RelatedI have just bought 4 gig of ram to help speed up my computer but when I put it in, it says that only 2.93 gig usable. Is there a way to use this other gig that i have.
View 4 Replies View RelatedI'm upgrading a computer's ram from 512mb to 4 gb. The current OS is Windows Xp Home and switching it to Windows 7. In order for the computer to see 4 gb of Ram would I have to use a 64 bit Windows 7 regardless of hardware?
View 6 Replies View Relatedupgrade ddr to 1gb ram
View 3 Replies View RelatedI have Hitman: Absolution and Microsoft Office 2010, that both need Windows 7. Luckily, I have an official Windows 7 install disc for both 32 and 64. Now, backing up all my qaqa on 4.7 GB dvd discs would be a hassle, and that would be what I'm looking at because there is only one hard drive. My question: What are the downsides to just installing Windows 7 64 bit over Windows XP 64 bit, rather than backup files -> reformat -> clean install?
View 2 Replies View RelatedI recently got a new computer, built it from the ground up for gaming. My school is part of MSDNAA fun time so I was able to get a free version of Windows 7 64bit service pack 1. I downloaded the files and it was an .iso file.
The first try, I ended up burning the .iso file its self to a disk with out mounting it then downloading the files onto the disk that way. So that didn't work.
The next thing I tried was downloading the actual files needed to install the OS onto a flash drive. The reason that didn't work was because I didn't format the flash drive correctly before I downloaded the files onto it. I then tried to format the flash drive but now I can't even open it or do anything else with it.
I ended up asking a friend who had a boot disk for Windows 7. The only problem is that he didn't know if it was 32 bit or 64. This disk actually worked... the only problem is that it's 32 bit.
I ended up getting another disk and downloaded the, what I believe, right files onto it. Popped it into my new computer to hopefully install the 64 bit version of the OS and over right the 32 bit version, or have it reformat my hard drive then install the OS. So far it isn't working.
Is there any advice I could get from you guys. I was thinking about wiping my hard drive and starting from scratch, hoping that the 64 bit disk I burned would work. So far, I haven't been able to actually wipe it, so I'm at a bit of a cross roads.
I am currently running Windows 7 Home Premium on a basic HD. I recently purchased a new SSD and a full installation of Windows Ultimate.
I would like to install Windows Ultimate to the SSD and use my old HD as a secondary storage device. Most importantly, I do not want to lose any of my documents or personal files currently stored on the old HD.
I'm looking for advice or recommendations on the best approach here. Should I do a full Win7 Ultimate install to the SSD and leave Win7 Home Premium on the secondary drive? Or, is there a better way to migrate files from the secondary drive to the new SSD and then format the old HD?
My machine (a very powerful 64bit one) wouldnt let me update from XP Professional to Windows 7 64 bit, but would allow me to update (clean install) to 32 bit. Now 32 is in can I upgrade to 64?
View 6 Replies View RelatedI was looking up previous topics regarding upgrading to Windows 7 and was not really finding any definitive answers. I have been perfectly happy and content with Windows XP Home Edition SP3 and have been flirting with the idea of upgrading to Windows 7What brought me to this was I want to install and play Battlefield 3 which only runs on Windows 7. I have a nice system even by today's standards, so I ran the Microsoft's upgrade to Windows 7 app checker. It told me that most programs would be fine but there are some like K-lite's Codec Pack and such that it is unclear if there is compatability. Now I am not going to backup data, clean install Windows 7, and reinstall all programs and apps just to play one game.
View 5 Replies View RelatedMy pc is old.500gb space, 2gb ram.Tired of xp, I want to upgrade to win7 ultimate. I have original cd.One of the reasons im doing this is becoz, I'm a gamer and lot of new games are not supporting win xp anymore.
1. How to do it?
2. I have 180gb worth data on pc, is it possible to recover/keep data as it is without transferring it somewhere else (I have 4 drives)
3. can i have xp on 1 drive and win7 on other?
4. I dont know which version I have, I think its 32bit. My xp is also 32bit , does it matter?
5. I have all installation cd's, everything. what else do i need?
6. How to connect to internet in win7. I have win7 on my laptop and I dunno how to.
7. my Dvd drive is not working properly , my sis has win 7 in usb , can win 7 be installed from usb?
I am new to this forum, I was a Desktop/Network engineer (before Windows 7 came out).I would like to hear any tips or tricks on upgrading from 32 to 64. I know you have to completely reformat ETc. To give you a slight heads up my HDD is already partitioned and its a new notebook 8MB fitted Ramm (but obviously only 2 MB being utilized (careful choice of words there!) I am currently checking first my hardware drivers to make sure there compatible
View 4 Replies View RelatedI have a winfast k8m890m2ma-rs2h motherboard and i want to upgrade my ram to 4 gig.
I dont know if i am able to though, because the infomation on the box and in the manuel doesnt tell me how much ram the motherboard can support. It is an am2 socket board but no where does it say the amount of ram it supports.
I was woundering if anyone has this board and/or knows how much ram this motherboard can support?
I am considering upgrading my laptop's RAM from 4 GB DDR3 to 8 GB DDR3. Currently my laptop contains 2 strips of the following memory:
Quote: 2GB 2Rx8 PC3-8500S-07-10 [x2] Thought I'd ask you guys for help, as I do not know where to look for Samsung RAM, or any other 100% compatible RAM for my laptop. Well, actually I know where to look but how do I figure out which suits my laptop the best? I prefer to have the same brand of RAM this laptop came with, which is Samsung (my laptop is an Acer Aspire 8735G).
Also is it better to have 2 strips of 4 GB or would it be a better idea for me to buy 1 strip of 8 GB? what type of motherboard this laptop's got, I can't seem to find it anywhere... I've used CPU-Z, checked my laptop's manual and service guide but nothing to find there.
Ok so i bought a new CPU off of amazon the other day it was a Athlon II X4 630 and I got it in the mail and installed it today. Well I decided to try and put my other stick of ram(2x4gb) in to see if it would detect as dual channel with this CPU and to my surprise it did. I tried booting into windows and it just kept restarting. One time it gave me a blue screen saying Machine Check Exception. After that one it would not give me any other blue screens just kept restarting as soon as it hit the login screen for Windows 7. Then I took the other stick back out and it logged in for a few sec and started to load windows and such then it restarted with a bluescreen giving me this error code 0x000000124.
View 1 Replies View RelatedI'm looking to upgrade my CPU and Motherboard from what I currently have.I recently purchased a GeForce GTX 680 but I am seeing minimal improvement from my previous GeForce GTX 480, and have come to the conclusion its my CPU holding me back.
Current specs -
OS - Windows 7 Home
CPU - Intel i7 930 @ 2.80GHz
Motherboard - Gigabyte X58A-UD5
I have been told in the past I cannot replace one and not the other due to my CPU/Motherboard being 1366 pin which is no longer in make.
I am trying to upgrade from vista ultimate to 7 ultimate, I don't want to format, the only issue I am having upon upgrading is that there is not enough disc space on my drive to continue the upgrade.
View 5 Replies View RelatedAlthough we have tutorials on this subject, I was impressed by this presentation of this common scenarioYou have to opportunity to print the entire tutorial and also to view the video.I can recommend this MS tutorial (and I don't always do that).Upgrading from Windows XP to Windows 7
View 3 Replies View RelatedI currently have a licensed Windows 7 x86 version installed on a desktop. I purchased a new SSD that I plan to use for the OS, Office, and some productivity applications. Games and media will remain on my existing 500GB hard drive. The hard drive currently holds my 32-bit installation of Windows 7. I want to install 64-bit Windows 7 on my new SSD and keep the data on my HDD.
Should I unplug my HDD when I install 64-bit Windows 7? If I plug in the HDD after installation will there be a conflict as to which OS should boot? I don't want to dual-boot or go back to x86, so I don't care about the windows installation on the HDD, just the data.
Should I keep my HDD plugged in with the new SSD and then install Windows 7 x64 to the SSD? Will that keep all of my HDD data intact?
Is it possible to mount Windows 7 via PowerISO and upgrade like that? Or is burning it to a DVD the only way to do it?
View 4 Replies View Related
