How I got in the current state is a looong story! But I have a new 2TB drive (~2 weeks old) that appears to have 3 partitions on it:
a) "New Volume", 80GB NTFS, Primary, healthy
b) "Local Volume", 0 bytes Not Formatted, Primary Healthy
c) 1.741TB Unallocated
My problem is I didn't create and don't want the "Local Volume" partition. But just about everything I try in Acronis Disk Director either crashes it or says "internal error".I've given up on the data. Is there anything I can do to get this drive back to its original usable state?I'm running Win7 x64 (and I suspect its repair utility caused the corruption).
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , Service Pack 1, 64 bit
Processor: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 4
RAM: 4095 Mb
Graphics Card: NVIDIA GeForce 8800 GT, 256 Mb
Hard Drives: C: Total - 120828 MB, Free - 32402 MB; D: Total - 238471 MB, Free - 238334 MB; E: Total - 102983 MB, Free - 30575 MB; F: Total - 43395 MB, Free - 20055 MB; H: Total - 82348 MB, Free - 82256 MB; I: Total - 248479 MB, Free - 116531 MB; K: Total - 153654 MB, Free - 67650 MB; L: Total - 61632 MB, Free - 18737 MB; M: Total - 312318 MB, Free - 127387 MB;
Motherboard: ASUSTeK Computer INC., P5QC, Rev 2.xx, MS1C88B51102856
Antivirus: McAfee Anti-Virus and Anti-Spyware, Updated and Enabled
Then when it loads up I get a Windows Error Recovery screen. saying.Windows failed to start. A recent hardware or software change might be the cause.If Windows files have been damaged or configured incorrectly, StartUp Repair can help dianose and fix the problem. If power was interrupted during startup, choose Start Windows Normally.if not etc. choose Launch Start Up Repair ( Recommended )When I choose the first option ( Launch Start up Repair ), what happens is, it first says Windows is loading files.Then it will just turn into a black screen with no cursor and nothing on it.Will stay that way until I force reboot once again.When I choose the second option ( Start Windows Normally ) , when I do this, it moves to the Starting Windows screen that's black with the Microsoft logo, and stays there for a couple minutes until it will eventually Restart itself back to the Windows Error Recovery screen with the 2 options.These are the two issues, and I have no idea how to start up my computer normally again, which is very frustrating b/c most of my work is on this laptop, and not backed up.I'm using a Windows 7, 64bit Laptop.I cannot restart the computer in safe mode.
So I just successfully did a custom download to Windows 7 64 bit from Windows Vista 32 bit.
I'm trying to delete the windows.old folder but when I use the disk cleanup default application Windows 7 gives you (cleanmgr) no where in the list does it show old windows files. So why can't I delete them from disk clean up? Is there any way to make it so I can?
Also I've already downloaded many things on my computer since I got Windows 7 up and running again and I hope when I do a disk cleanup and delete the windows.old folder it won't also delete the new programs I've just installed.
how tricky it is to keep a clean install on Windows I'm wondering if i could ask some advice?
I will have the OS and programs on the ssd, let's call that c: and data on a regular hd, d:
If after time my c: has become bloated with appdata, unused folders in the users folder etc. How can I revert c: back to it's original state without changing d: ?
Can I do this with a restore point, or do I need another piece of software?
first time installer of an SSD here! I'm extremely excited to pop this bad boy in mainly for a faster overall boot of my computer. Recently, my friend gave me his Crucial M4 64GB SSD, which I am very thankful for. I plan mainly to put Windows 7 64-bit on it and that will be all. I was reading this guide: (SSD - Install and transfer the Operating System)
Once I opened up the command prompt, I did all the processes stated until I got to, "Clean" for whatever reason, after typing in the command a prompt came up that stated:
"Virtual Disk Service Error: Clean is not allowed on the disk containing the current boot, system, pagefile, crashdump, or hibernation volume."
So, what I'm asking is there anyway I can bypass or fix this problem so I can continue the process of putting Windows 7 on the SSD? And another question is, would it really be worth buying the $20 program that the guide offers?
I have Vista Ultimate installed today. I intend on buying Windows 7 Home Premium upgrade. I would like to install 7 on a new WD Caviar Black I just ordered as a clean install.
1) Is this possible or will Win 7 flag this as a new install because of the new HD and not let me proceed since I plan on buying an upgrade disk?
2) If not, what options do I have?
3) If I can do this, can I plug my old drive in as Drive D: or E: to transfer the data over?
I'm trying to mount a disk image so that I wont have to have the CD in to play a game.
I downloaded daemon lite but it tried to install a million bullshit things with it, and my computer was having a lot of hiccups until I uninstalled it. Is there a CLEAN program out there that can mount ISO files on W7 x64?
It's important that this be clean because it's my workstation.
Guys my first post and I have looked at the tutorials just wanting to clear up a few things. I have Windows Vista Home 32 Bit and upgraded to Windows 7 Pro 64 bit. I installed a new HDD at the time as I wanted Windows 7 on that instead of on the Vista drive. That has left me with the little issue of the product key not being valid, as I didn't install on the top of the older system.
Now I will need to activate it at some point and have just come across the forum and your excellent tutorials, now you have linked to Paul Thurrott's guide and he mentions a double install method which is supported by Microsoft. I would prefer this route as it looks easy, and less likely that I will do it wrong. My main questions are when I installed Windows 7 I stupidly clicked the Activate Online thing. Will double install or any of the other methods still work? Will the double install lose all my upgrades I have had to make to get all my devices working?
not to bothered but would prefer this not to happen as it took me 3 days to do my drivers and various other installs to get back to being able to run fully. Anyway so far I am very impressed by Windows 7 and well Vista will never be used again and once I have this little issue sorted I may well be getting rid of vista of my other HDD.
Just one final question how much RAM can I install now that I am running Windows 7 64 bit, I currently have 2gb (1gb per channel for processor). I know what type to get but what is the Maximum it will take for the OS. Anyway I know it is Christmas and not to fussed if I get a reply tonight or tomorrow, I hope some one can help me. Finally I would like to wish everyone a Merry Christmas.
I bought an ASUS laptop and it came with no disk. I not only do not want the bloatware but I want to switch the HDD out for a newly purchased SSD. How can I do this? I want to use the license that came with the laptop
so i got this cool Hp laptop... nice the bad part ... I had a single 500 gb Hard disk. only two partitions ... experimented to partition it ... 1. I upgraded my basic drive to dynamic drive ( got four partitions now) 2. My OS (win 7 home premium x64) is on one of the partiotion on the dynamic disk. QUESTIONS How do i convert back to basic... i only have my OS key no install cd? Can i take a back up or sys image that i can use later on after converting my hard disk to basic?
im usin 2tb segate new hard disk sir..in my system i cant able to boot my os and also my hard disk...its showin that hard disk boot failure insert system disk press enter ...i restarted many times its sayin the same problem...in my gigabite mobo bios my hard disk is not get detected sir....the problem is that wen im installin the new os for 2nd time its all went nice only sir but at the completion of the os it wil ask for the user name and password but in my system its frozen sir fully of black screen and i cant able to do anythin so i restarted my system from that im gettin this error as hard disk boot failure insert system disk press enter.....that my new hard disk and all of my data is in that hard disk only..this problem arises wen im installing the os for 2nd time sir.
I woke up this morning, and I found that my computer was displaying this message"Disk boot failure, insert system disk and press enter". There are a ton of needed documents on the computer, and I'm hoping that they can be saved some way.
After I got my new laptop, I installed antivirus, windows updates, etc, removed bloatware and installed the software that I actually use. Then I created my System Repair disk (single disk). Does this disk include all software and windows updates that were on my computer at the time I created the disk? I have read that System Repair disks will only have the factory settings of Windows 7, but I don't know if this is the case for all System Repair disks or only those that came with the computer and were made before the computer was purchased?I've also read that a System Repair disk could include a system image. Is this true and done by default when the System Repair disk is created?
I've been having this error even after reformatting and reinstalling Windows 7 on my desktop. I've done reformatting / reinstalling Windows 7 several times, yet the problem still occurs. I'm thinking of my HDD as being corrupted or messed up. The problem occurred after I accidentally hit the CPU when I was stretching my foot. The screen froze after that. Upon rebooting it, 'Disk boot failure, Insert system disk and press enter' occurs. After I entered the DVD installer of Windows 7, the screen just hangs.
I have been having a bit of trouble with windows 7 lately, namely that it won't start up right. When I boot from the drive normally, it gives me the classic "BOOT DISK ERROR: INSERT SYSTEM DISK AND PRESS ENTER" message.
However, I soon discovered that if I boot from the Windows 7 cd and do not boot from it (By ignoring the "Press a key to boot from CD or DVD..." Windows 7 boots up fine. I've tweaked my BIOS over and over, but the same problem persists. The drive is brand new and fine. What can I do?
My friend bought a new PC and needed to put am OS on it. He put in the W7 disk and the error message 'disk boot failure insert system disk and press enter' appeared before installation was shown. He has tried changing around BIOS and it also recognises the hard drive and DVD/ CD ROM drive. Here is the specification he was given:Case : CIT Reaper Black Mesh fronted Tower CaseMotherboard : Gigabyte 78LMT Motherboard TechnologyCPU : AMD Bulldozer FX 4170 4.2ghz 8mb CacheHard Drive : 1tb Sata Hard DriveMemory : 8gb DDR3 1600mhz MemoryOptical Drive : 24x Dual Layer Sata DVD WriterGraphics Card : Nvidia Geforce GTX 650 2gb GDDR5 With HDMIPower Supply : 750 Watt Branded Power Supply Also, he has tried booting BIOS in different order
trying to install Windows 7 on sony laptop with a copy that is different from the original copy of Windows 7.did partdisk, clean all, create partition, and dvd install gave the "can't install to disk, turn on disk controller in BIOS" error. there is no disk controller function in my BIOS.if partdisk clean all was successful, does that mean the HDD and its controller board are ok, that is, not physically damaged, and the problem is with software/installation/setup etc.?what should i do next, in order to have a successful install?
I have IOmega 1 TB hard drive. 2 days ago, my comp restarted suddenly after which my external drive is corrupted.I get the error 'H: is not accessble' The disk structure is corrupted and unreadable.It shows up in the disk management as RAW file system,I have almost 700 GB of important documents, pictures & files that I don't want to lose.Does anybody know of any good recovery software that can help.
I purchased a new PC with Windows 7 in June 2012. It came with a Samsung optical disk containing Windows 7. I am eligible for the $14.99 USD upgrade to Windows 8.Will there be an installation disk for Windows 8 available at this price and if not, then how much more will it cost?If not, then how should I ensure that I can easily install Windows 8 after a hard disk crash? Do I have to keep my Samsung optical disk of Windows 7?
in my hardisk with G: size 465gb xp shows that 74.86 gb is remaining space......while space used is 0 , there are no hidden files, nothing in the disk K: size 186gb same as above and remaining is 35 gb according to windows xp i: size 196gb .in this only 9 gb is used and xp shows that 10gb is remaining//
i remember, last week everything was ok and all of sudden this problem has occurred. all other drives are ok only these three are way over their own heads.
my system is
Intel Core i5-2300 cpu@2.8ghz 2.79ghz,3.48 GB of RAM and windows is 32 bit/
One of the hard disks suddenly failed to initialized. The first problem I found on this disk was unable to open one of the zip files then the machine crashed. After I restarted the machine the HDD drive was missing from the Computer. My computer has 6 hard drives including the missing one. One is Corsair SSD for the OS and the rest are Samsung, Hitachi and WD all of them are 1TB. When I checked on the Device Manager the Drive is there and the device status is properly working. I checked on the Disk Management and I got a message to Initialize the Disk then I followed the instruction. Again I got an error message " Virtual Disk Manager - The system cannot find the file specified." On the Disk Management windows the status of the Disk is "Unknown 931.51GB Not Initialized- Unallocated". I tried to initialize but the same error I got. I did not name this drive but it named automatically RV 01 and the Location is 0.I use Acronis Disk Director to fix the problem but it cannot change the status to online. What I did last week was I installed some programs to the Drive X instead of Drive C.My computer OS is Windows 7 64bits all the drivers and software are updated.
When starting the computer, I keep getting "Disk boot failure, insert system disk and press enter". Nothing works other than putting in the boot disk and hitting the restart button on the tower. Then it will boot up and run fine. But how do I stop it from having to have the disk in order to load? Checked in the BIOS and the hard drive is the first load.
i have a toshiba satellite C650 that has recently come up with a disk read error. I want to access the command prompt to try some potential solutions that I have read about on the internet. I have made a Windows 7 recovery disk using my other acer laptop which also has Windows 7 installed. When I use the recovery disk and it has loaded the files etc it just brings up a black screen and the cursor. I tried booting my acer laptop from the recovery disk and it worked fine. why I am getting the 'disk read error - hit ctrl, alt and delete to restart' message?
I have few questions on Windows 7 Upgrade. Currently I'm using windows vista home premium 64 bit and I bought an windows 7 home premium 64 bit upgrade disk.
first thing is I want to format my previous operating system and all the data in my laptop and install windows 7 in it using the Upgrade disk.
second thing is I don't have my vista installation disk with, my laptop was pre-installed with vista so in future if I want to switch can I get back VISTA using system restore.
third is can i install windows 7 on a new hard disk using a windows 7 Upgrade disk?
Its a bit complicated to state my situation, anyways, I have 2 HDD, and the PC won't boot if I removed the old HDD even though I've formatted the old HDD and win7 is on the new HDD.I have 2 physical HDD in PC
(1) 80GB old hdd and noisy. (not SATA) (2) 500GB SATA hdd and sexy.
My powersupply only supports 1 SATA connection, and I don't have a DVD-Rom.I've unpluged the (2) and replaced it with my dad's SATA DVD-Rom to clean install Win7 64bit on the old (1), after I've finished, I removed the SATA DVD-Rom, I plugged back the (2), installed Win7 64bit ISO again from the (1) on (2), then I organized everything and split the (2) to E: and F:.
Everything's fine until I wanted to remove the old noisy hdd. When I did that, the PC started to bitch on me and didn't want to boot from (2).I've tried to rename (2)'s letter to C:, but it gave me 'invalid parameter' error. I doubt that it'll work by itself since it'll need to rename all the softwares' locations and stuff.so I went through another way, renaming (1) to a random letter like K: and wishing that'll work, I've restarted, shutdown'ed, and unplugged (1), didn't boot from (2).So it left me with only and only solution is by clean install, -but- I can't do it since I don't have an old dvd-rom nor do I have 2 SATA PSU cables... so I go back to the begging and...know that I have only 1 option by installing the win, is by the iso.
Now, what I'm thinking is that there's a possible way(maybe?) that I can replace Disk 0 box by Disk 1 box.Here's a picture to clarify it.So that's it, notice the 2 boxes down there? I'd like to switch Disk 0 by Disk 1 and then remove the old crappy 80gb hdd.
I have created an encrypted drive (X) on my system (Windows 7 - 64 bit) and wish to store my emails there. I did this successfully in Vista.To do this I need to change X:/ from a Removable Disk to a Local Disk, please can somebody explain to me how and wehre to do this?
OS Name: Windows 7 Home Premium Version: 6.1.7601 Service Pack 1 build 7601 System Type: x64-based PC
Last night as I was attempting to install Windows 8 RP to test it out, I decided I would do a dual boot incase I didn't like it. It downloaded, burned fined and I went to make a new partition, and this is where things went south for me. It converted every disk to dynamic once I had created the new disk to install it on and for the life on me I can't get it to convert back to basic, so I'm pretty well screwed if something goes wrong. Things I've done:
1) Attempt system restore - Ok, so I didn't have a restore point created so this is of no help.
2) I followed this guide found here on SevenForums and attempted all 3 methods - nothing worked Convert a Dynamic Disk to a Basic Disk
3) I downloaed EaseUse Partition master to attempt to change dynamic back to basic, and still a no go.
4) Tried to install Windows 8 again and it would not let me delete the current dynamic disk partitions to start over
5) Tried HP recovery tools to set the computer back to factory condition and it wouldn't work.
Is it possible to delete everything and start over from scratch or will it still be dynamic? At this point, i want a time machine so I can go back before ever attempting to make a dual boot.
I'm trying to create a new disk partition so that I can install Windows 8 (Consumer Preview) on it. However, I'm running into an issue here. When I go to create the partition, I get to the final step and this is what I run into (see image below).I'm thinking of just leaving the space unallocated and formatting it when I do my install of 8, but then I'm afraid that might render my Windows 7 partition unbootable. Will that happen?
