Just a question out of curiosity, I'm wondering how you guys normally suspend your computer. As in hibernation, shutdown, sleep, or yank the powercable and remove the battery hehe.
Personally, ever since 7, I pretty much always simply leave my computer in sleep mode. Wakeups are so quick, and the memory management is so good that I rarely feel the need to actually shut down my computer.
well the USB selective suspend option I have set to "never" and it dont care, it turns off the drive all the time
I can sit there and the drive will spin up and then turn off every 30-45 min, it spins up and then spins down pretty fast as if it was just work up by me and then it is going back to sleep - I cant figure out what on my computer is waking it up but I dont care I dont want it to even go to sleep in the first place
I dont want the USB drives to ever, ever, EVER! spin down no matter what I dont care about power useage or drive life, I cant effing stand this, when I boot into Linux no problems at all the drive will stay running for hours at a time but stupid effing Windows dont work
I just installed the beta on a notebook. Everything works fine except for one thing. If my notebook wakes from suspend the screen comes up to log-in but within seconds the screen turns black and my notebook reboots and comes back with an error (start in save mode or start.
My problem is that any time I close my laptop's lid, or sometimes when I put try to suspend it, the computer crashes. It initially stays on, and the leds are blinking, than they stop blinking, and it turns completly off. When I turn it on again it tells me that blue screen was the problem.
I'm worried since I bought it last year, it's a Toshiba Satellite M645, Intel Core I5 M480, 4Gb ram, Windows 7 64 bits.
I just built a new computer and had it running stable for several days with all hardware except the graphics card and a new monitor. After plugging the new video card, I believe the system remained stable, but am not 100% confident since it only survived overnight. After plugging the new monitor (HP z2740w) and connecting via USB crashes started occurring when resuming from sleep.
I tried uninstalling the graphics drivers and the problem seems to have stopped for now, so I'm reinstalling to see if anything changes.
Windows 7 Pro 64 OEM (System Builder) Everything in the machine is brand new except the hard drives. Installation age is a few days.
I just upgraded my HTPC and so built my first Windows 7 PC (never had a need to upgrade from XP, believe it or not). So far I am quite impressed but I am having a number of issues with power management. I'd love some help tying all these together so I'll start at the beginning.I've had the machine running for two weeks now. It's an Intel DH77DF mobo, all the newest drivers on it, fresh from Intel's site. At first I noticed the keyboard would become unresponsive after a while -- not even the lights for caps/num lock would turn on (MS Wired Keyboard 600). So I figured it was shutting off the USB ports and so I went into Device Manager and hit the properties for all USB ports and unchecked allowing Windows to shut them off to save power. I then went to power management and turned it on to maximum performance.
Next morning, I wake up and go to hit the PC to put on some music and the keyboard is unresponsive again. (Aside: I have two keyboards connected, the MS one mentioned earlier and a Logitech diNovo Mini for HTPC stuff. There's also an old MS wired mouse attached (which has never lost power, oddly enough).) I restart to bring the keyboard back around -- because unplugging it and putting it in any USB port won't bring it back -- and when I restart, it takes FOREVER. I'm talking 15-20 minutes (when boot after POST takes like 30 seconds). The restart eventually craps out to a BSOD: power driver state failure, error code 0x9F.So I researched that error and most of the advice seems to come to "run sfc scannow" (done, more than once, no issues) and "update your drivers" (already done). I looked in the event viewer for evidence of that crash but don't think I found anything.
I found a page on a registry entry you can make for disabling selective suspend in USB completely, and I've done that, and it says it's disabled under the advanced settings in power management, but, I dunno...my peripherals still die. I noticed something during this morning's restart. I had my work laptop on and it's a Mac, and Finder always shows the devices on the network. During the long shutdown that goes to bluescreen, the HTPC is not on the network before restart, comes on to to the network five minutes or so into the long shutdown, hangs out on the network for a few minutes, disappears, and then BSOD about a minute after that. It's not just USB shutting down, I guess (if I had a SATA device I'd test that too).
My laptop is very slow to respond, like about 5 minutes, after being hibernated for a long time. If it is just put to 'Sleep' then it is almost instant likewise if it is suspended (hibernated) for less than a day or so then again it is instant once the Unlock screen appears.
I find that after leaving my box in suspend overnight, it is very sluggish to resume. But after being online for the first 10 mins the network goes down & I have to run network diagnostics to fix. The network card gets reset each time with a host not found fault. I am using a Edimax Wireless 802.11 b/g/n 32-bit PCI Adaptor (EW-7722In.). I am using the basic Windows driver as uninstalled the Edimax utility due to above fault. This may be two separate problems, (tho it would be nice to solve both.) I am carrying out a dsk chk as advised on these forums for slow resume from suspend/sleep.
I have a desktop pc and a notebook, and both makes part of my homegroup, however, desktop is the default pc on my network, that would be a "server", and it is configured to enter in suspend mode after 30 minutes, the default configuration of Windows 7. This is my problem: when my desktop enter in suspend mode, I'm not able to access my files and libraries from my notebook.Is it possible to keep a network always enabled even in suspend mode or Windows never can enter in suspend mode if I want to be able to access my network and homegroup? I will prefer to have an option to keep network enabled and accessible but with Windows in suspend mode to save energy, but if that is not possible, ok too.
I just run Advanced System-Care 6 to optimize my computer and after restart, I check that my computer doesn't suspend.I checked suspend setting and they are as before.When I go to START >> Suspend it tries to suspend and go back to login screen.Any idea how can I reset these settings?
I have Windows 7. My computer keeps crashing I have written down the stop codes, which are all different each time Also keep getting nv7ddmKm.sys.I have scanned the computer with Kapersky and also malwarebytes but both scans are clean.I can be doing anything on the computer when it happens but mainly it is when i am using Adobe CS5 or uploading images onto my computer from Nikon software installed on the computer.
I was just wondering if I am able to take windows home basic off a store bought computer and put it on another computer. The reason for this is I am currently building my own and want to avoid unnecessary cost. As I own a laptop that I will no longer be using and a retail copy(windows home premium). So can I take the windows off my old laptop and put it on the computer?
Very recently I started having a problem with the remote desktop where it says the following message:
"Your computer could not connect to another console session on the remote computer because you already have a console session in progress."
What I am trying to do is to access my Vista Ultimate computer using my Windows 7 Ultimate computer, and have been doing so this way for more than a year.All of a sudden I start getting the message that I have quoted. I do not know why it started doing that.As well, going in the Users tab of task manager you can see there that I am logged in as a console user.
I have a two year old Dell PC with Windows 7. I got a virus in my computer that by phone and computer takeover Norton located in my MBR. When they cleaned it my computer will no longer boot up. Norton worked with me for three days on the problem but we were unable to fix the computer. I followed other web sites and repaired my MBR but it still will not boot up. I tried System Repair, Check point, Image, and Dell system restore and all failed. I have tried to use the Windows install CD and all I get is a black screen with a flashing cursor and then after 3 minutes the compute attempts to boot again and fails. I tried everything to try and wipe the drive from C prompt and it will not let me. I have very weak computer skills but I can follow directions and I have wiped a previous computer I owned. (I confirmed that my CD drive is working) I also should mention I have a second hard drive on my computer that I backed everything up to.
Computer runs very slow. Computer freezes randomly. Does not want to boot past windows startup except for in safe mode(SOMETIMES). IF IT BOOTS takes and an incredibly long time to get to the desktop (20-45min). Does not want to run programs. Runs EXTREMELY slowly (makes a windows 95 pc look like a speed demon.) Random restarts, restart loops, and shutdowns. Sometimes after turning on it will immediately shut off then turn back on. Keeps recommending windows repair on startup. Wants to run chkdsk, then freezes on it.Malware detection programs. Hardware diagnostic programs. registry tools. disk defrags. Driver updates. Windows updates. BIOS update. System restore. Windows repair tool. Repair installation (twice). WINDOWS 7 CLEAN INSTALLATION (twice).Exactly the same as the first day it started happening. So not only did I lose all programs and files, but my pc still runs like crap. Also, this is a higher end pc under a year old. [code]
I'm fixing my sisters computer, It froze on her, when she tried to start it up again it went into some sort of system repair mode and after about 20hrs of this (no joke) it gave me the option to restore the computer to factory settings, it also gave me the option to install some sort of backup on the hard drive, however i tried this and it said there was no room on the hard drive (if i didn't know any better I'd say the problem was with the hard drive) i went ahead with the system recovery as it seemed to be the only way to fix the computer (i know i sound like an oaf) now the computer is showing me a screen which states that i need to insert my windows installation disc, however the laptop has no disc drive!
Additional information
HP Pavilion dm1-4004sa AMD Dual-Core E-450 processor 4GB memory 320GB Hard Drive
I m having 2 laptops at home, I want to create system image file of laptop1 onto laptop2. Since the data is large i cant take the hassle of creating sytem image on a DVD as it will require more DVD's to do it. So m planning to store it on Laptop2. I m thinking of connecting 2 Laptops with a LAN cable and then create the sytem image on other laptop.
my monitor exhibited signs of flickering during start-up, but only minor ones and would just stop at the 'Welcome' screen of windows so I didn't give it much thought. Iv'e been using it with the cpu the same time I bought the monitor.But after some time, the flickering got worse. It went from 1-2 second interval flickers to a whole 10 seconds of blackness before it showed anything.Now,Iv'e got a new cpu but still using the old monitor. After a day or so, the monitor exhibited the first symptoms of my first cpu, so I just dismissed it. But after a week, It got a hell worse, before I even start-up my computer, the monitor doesn't show Analog/Digital at the top-left corner of the screen. PLUS my cpu keeps restarting after I pushed the ON button after 10 seconds or so. Is the monitor responsible for the restart and what could be the reason for the flickering?
i HAVE TO GET THE INFORMATION ROM MY OLD COMPUTER TO A "CLEAN' USED COMPUTER. IT HAS BEEN SETUP FOR WINDOWS 7. bECAUSE OF MY WIFES SURGERIES AND THE UPCOMING ONE, WE HAVE TO DO IT OURSELVES. I HAVE A ETHERNET CABLE TO GO FRON COMPUTER TO COMPUTER, BUT THATS IT. I WAS HOPING TO PRINT OUT THE DIRECTIONS AND DO IT MYSELF.
From new windows 7 laptop through wireless home network tried to access XP desktop connected to same wireless home network. Was able to move files from xp computer to windows 7 computer but when tried to access files on xp computer from windows 7 computer got the following error after trying to click on the xp computer listed under Network in Windows 7 Computer:Windows cannot access <computer name>Is there a setting on the windows 7 or computer xp that needs to be set for windows 7 computer to recognize xp computer?
So What i am saying is whenever i boot up my computer there is a black with white text screen that says something about an unconfigured hard drive that is in my computer. But then again whenever i am on my desktop doing whatever i can use it perfectly fine. Also it does not show up in the bios. it just has my boot up drive and my optical drive.
I have a 32bit comp, W7 Ult, 1TB HD and I would like to clone that onto a comp that is a 64bit. HD is the same capacity, question is, can this process be done? Will the programs from the 32bit work in the 64bit comp.? I'm thinking of using Acronis True Image Home 2011.I was given a newer desktop minus the HD and was going to retire my old desktop and I wanted what was on the old comp(32bit) transfered to the new (64bit) tower.