I just installed the beta on a notebook. Everything works fine except for one thing. If my notebook wakes from suspend the screen comes up to log-in but within seconds the screen turns black and my notebook reboots and comes back with an error (start in save mode or start.
Any thoughts?
When attempting to wake up my wife's PC from sleep, the computer will hang for a few seconds at a black screen and then reboot. This is followed by the standard Windows has not shut down properly message asking if I want to launch into safe mode. This has been happening the past few weeks. It's Windows 7 64-bit. I've attached the results of the SF Diagnostic tool.
Stuff I've tried:
- Turning off hybrid sleep
- Uninstalling and reinstalling the Realtek USB WiFi adapter (network adapter problems came up on some google searches)
- Toggling USB suspend in power settings
Is it possible somehow to make Windows works in S3 sleep mode (suspend to RAM)?. Did anyone already try this? Any success?
View 1 Replies View RelatedJust a question out of curiosity, I'm wondering how you guys normally suspend your computer. As in hibernation, shutdown, sleep, or yank the powercable and remove the battery hehe.
Personally, ever since 7, I pretty much always simply leave my computer in sleep mode. Wakeups are so quick, and the memory management is so good that I rarely feel the need to actually shut down my computer.
well the USB selective suspend option I have set to "never" and it dont care, it turns off the drive all the time
I can sit there and the drive will spin up and then turn off every 30-45 min, it spins up and then spins down pretty fast as if it was just work up by me and then it is going back to sleep - I cant figure out what on my computer is waking it up but I dont care I dont want it to even go to sleep in the first place
I dont want the USB drives to ever, ever, EVER! spin down no matter what I dont care about power useage or drive life, I cant effing stand this, when I boot into Linux no problems at all the drive will stay running for hours at a time but stupid effing Windows dont work
My problem is that any time I close my laptop's lid, or sometimes when I put try to suspend it, the computer crashes. It initially stays on, and the leds are blinking, than they stop blinking, and it turns completly off. When I turn it on again it tells me that blue screen was the problem.
I'm worried since I bought it last year, it's a Toshiba Satellite M645, Intel Core I5 M480, 4Gb ram, Windows 7 64 bits.
I just built a new computer and had it running stable for several days with all hardware except the graphics card and a new monitor. After plugging the new video card, I believe the system remained stable, but am not 100% confident since it only survived overnight. After plugging the new monitor (HP z2740w) and connecting via USB crashes started occurring when resuming from sleep.
I tried uninstalling the graphics drivers and the problem seems to have stopped for now, so I'm reinstalling to see if anything changes.
Windows 7 Pro 64 OEM (System Builder) Everything in the machine is brand new except the hard drives. Installation age is a few days.
I just upgraded my HTPC and so built my first Windows 7 PC (never had a need to upgrade from XP, believe it or not). So far I am quite impressed but I am having a number of issues with power management. I'd love some help tying all these together so I'll start at the beginning.I've had the machine running for two weeks now. It's an Intel DH77DF mobo, all the newest drivers on it, fresh from Intel's site. At first I noticed the keyboard would become unresponsive after a while -- not even the lights for caps/num lock would turn on (MS Wired Keyboard 600). So I figured it was shutting off the USB ports and so I went into Device Manager and hit the properties for all USB ports and unchecked allowing Windows to shut them off to save power. I then went to power management and turned it on to maximum performance.
Next morning, I wake up and go to hit the PC to put on some music and the keyboard is unresponsive again. (Aside: I have two keyboards connected, the MS one mentioned earlier and a Logitech diNovo Mini for HTPC stuff. There's also an old MS wired mouse attached (which has never lost power, oddly enough).) I restart to bring the keyboard back around -- because unplugging it and putting it in any USB port won't bring it back -- and when I restart, it takes FOREVER. I'm talking 15-20 minutes (when boot after POST takes like 30 seconds). The restart eventually craps out to a BSOD: power driver state failure, error code 0x9F.So I researched that error and most of the advice seems to come to "run sfc scannow" (done, more than once, no issues) and "update your drivers" (already done). I looked in the event viewer for evidence of that crash but don't think I found anything.
I found a page on a registry entry you can make for disabling selective suspend in USB completely, and I've done that, and it says it's disabled under the advanced settings in power management, but, I dunno...my peripherals still die. I noticed something during this morning's restart. I had my work laptop on and it's a Mac, and Finder always shows the devices on the network. During the long shutdown that goes to bluescreen, the HTPC is not on the network before restart, comes on to to the network five minutes or so into the long shutdown, hangs out on the network for a few minutes, disappears, and then BSOD about a minute after that. It's not just USB shutting down, I guess (if I had a SATA device I'd test that too).
Is it possible to command line disable disable USB selective suspend setting? or even regedit it?
[code[]...
My laptop is very slow to respond, like about 5 minutes, after being hibernated for a long time. If it is just put to 'Sleep' then it is almost instant likewise if it is suspended (hibernated) for less than a day or so then again it is instant once the Unlock screen appears.
View 3 Replies View RelatedI find that after leaving my box in suspend overnight, it is very sluggish to resume. But after being online for the first 10 mins the network goes down & I have to run network diagnostics to fix. The network card gets reset each time with a host not found fault. I am using a Edimax Wireless 802.11 b/g/n 32-bit PCI Adaptor (EW-7722In.). I am using the basic Windows driver as uninstalled the Edimax utility due to above fault. This may be two separate problems, (tho it would be nice to solve both.) I am carrying out a dsk chk as advised on these forums for slow resume from suspend/sleep.
View 9 Replies View RelatedI have a desktop pc and a notebook, and both makes part of my homegroup, however, desktop is the default pc on my network, that would be a "server", and it is configured to enter in suspend mode after 30 minutes, the default configuration of Windows 7. This is my problem: when my desktop enter in suspend mode, I'm not able to access my files and libraries from my notebook.Is it possible to keep a network always enabled even in suspend mode or Windows never can enter in suspend mode if I want to be able to access my network and homegroup? I will prefer to have an option to keep network enabled and accessible but with Windows in suspend mode to save energy, but if that is not possible, ok too.
View 1 Replies View RelatedI just run Advanced System-Care 6 to optimize my computer and after restart, I check that my computer doesn't suspend.I checked suspend setting and they are as before.When I go to START >> Suspend it tries to suspend and go back to login screen.Any idea how can I reset these settings?
View 9 Replies View RelatedHow to Suspend or Resume BitLocker Protection on Windows 7 Drive ?
View 0 Replies View RelatedRunning a dedicated PC ( dedicated to television ! ) with a Hauppauge 2250 tuner card.
Recording works fine if the PC is active ( not asleep ) but if I set up something to be recorded ( OTA channels only ) when I'm not around, using the WMC guide, it will not wake up the PC from sleep mode and record the program.
Everything I am able to find says that WMC WILL wake up the PC so I suspect it is some obscure setting buried 138 levels deep on some obscure panel path but I sure can't find it !!
Just built the girlfriend a computer:
Asrock Z77 Extreme4
Ivybridge i5 3570k
2x4GB Crucial DDR3 1600 DIMMs
OCZTech 600W PSU
Generic CDRom, Seagate HDDs mirrored, WD Primary HDD.
No GPU connected as she won't need one.
At first I tried a mild overclock at 4.4ghz and stability tested with P95 for a few hours with no errors at all. Everything worked fine!Come time for her to actually use it, of course, BSOD's ensued, followed by boot looping.Boot loop would not stop until one of the DIMMs was removed.Naturally I thought the RAM was the culprit and tested the sticks using Memtest86, 4 passes each with no errors.Next tried single sticks of RAM in each slot, booted up fine. Tried with two sticks (1&3, 2&4), and it seemed to work fine if booting from a clean shutdown (as opposed to BSOD).Reverted to default BIOS settings and it seemed to help a little, as in it would actually wake from Hibernate a few times, but then out of nowhere would BSOD again.I read somewhere that a bent cpu pin might do this, but since a single stick worked on each of the 4 slots, I think this can be ruled out.BIOS are upto date with latest 2.20 version as well.Right now the computer is working fine with only one stick of RAM, the last BSOD happened with two sticks in, opening up Photoshop and InDesign at the same time with stock BIOS settings.
Code: ==================================================
Dump File : 100812-23337-01.dmp
Crash Time : 10/8/2012 10:55:04 PM
Bug Check String : IRQL_NOT_LESS_OR_EQUAL
Bug Check Code : 0x0000000a
Parameter 1 : 00000000`0013213f
[code].....
So as some of you may remember, I had problems getting Windows to sleep before. Those got fixed and have been running fine for awhile now. Goes to sleep on its own now.
However, the problem I had before is back and has been going on for awhile. When I wake up the computer, whether it is scheduled in the morning for back up or I do it on my own, more often than not, it freezes a few minutes after waking. I can get logged in, start doing stuff, and then it freezes. Doesn't do it every time as I've had it go for days between freezes with several wake ups in between.
I doubt it is hardware related as I have checked the memory, I have turned down my overclock a bit in case it is processor, and Ubuntu will go to sleep and wake up with no issue. I doubt it is hard drive related as when I had to fix the sleeping issue, the whole hard drive was wiped and then reinstalled so the file structure is different. As the same stuff, services and applications are turned on with each restart, that shouldn't be the problem. Firefox causes script issues in Ubuntu on both my desktop and laptop so I am going to back to Chrome and see if that does it, but I doubt it because I have awoken the computer with Firefox off.
When the computer "wakes" from sleep all i get is a backround, I can move a mouse around but thats it. Windows 7 operating system.
View 5 Replies View Relatedsometimes when coming out of sleep mode I'll be greeted with the boot screen. Upon logging into Windows, I get the "Windows has recovered from an unexpected shutdown" error:
Code: Problem signature:
Problem Event Name:BlueScreen
OS Version:6.1.7600.2.0.0.768.3
[Code].....
My computer fails about 1/4 of the time when waking up from standby (sleep). I've attached all the necessary files.
View 9 Replies View RelatedThere is a schedule task that has been waking my PC since about 4 am this morning, it wakes my PC every 5 minutes so I am having to power off my PC to stop this from happening.What it the cmd toold that will tell me the last schedule task that woke my PC, and how do I then go about stopping that task? The reason I am asking is because I have looked in the schedule task manager and can't it.I know it's not the LAN or any USB devices as I have disabled them in the BIOS.
View 1 Replies View RelatedEverytime my Windows 7 Home PC wakes from sleep mode, there's no internet connectionWhen I run the Troubleshoot Problem tool, it always has to reset the LAN which fixes the issue. How do I resolve this issue for good?
View 8 Replies View RelatedWhen I put my computer in Sleep mode, using the start button / shutdow / sleep it "sleeps" for about 10 minutes and wakes up on its own! Could it be programs trying to run in the background that wakse it up; Carbonite Backup or Norton? I can't get the computer to remain in sleep mode!
View 4 Replies View RelatedI have Windows 7 Ultimate x64. I just recently decided to start trying to put my PC to sleep rather than just let it run constantly when I'm not using it, and found that when I resume it, even if it's IMMEDIATELY after putting it to sleep, there is no sound.The only "fix" I've found is to either reboot, or (the quicker method) is to disable and enable the sound card in device manager. Sound then immediately returns.Obviously this is far from ideal and I'd love for it to just function properly. Any ideas? My sound is onboard Realtek HD audio on a Biostar A770E3 motherboard.
View 5 Replies View RelatedI have no speaker sound when the computer wakes up from sleep mode. (Realtec high definition audio). The only work around I can find is to unplug the jack at the back and plug it in again. Is there a way to solve this issue
View 5 Replies View RelatedI have a Lenovo e525 laptop with windows 7 ultimate x64 and a second hard drive where the dvd drive was, when I wake from sleep any of the following can happen: - It wakes but the screen is dimmed and the brightness buttons donīt work so I have to reboot. - It wakes to the screen off, I have to reboot. - It wakes then after up to 30 seconds an error pop up shows and the laptop reboots without shutting down. - It wakes then after up to a minute it reboots without shutting down. - It wakes fine and I can use it, 1 out of 10 times.
View 14 Replies View RelatedMy computer will BSOD after waking up from it's sleep. Now it wasn't a usual occurrence, it just lagged but lately it always went to blue screen after waking up.I checked, there are no Flash Drives plugged in, but the USB for the wireless mouse is plugged in but that never had any affect before.
View 7 Replies View RelatedI have a Logitech M570 trackball mouse, which Windows calls "HID-compliant mouse". I have already unchecked the box in device manager, with no luck. Even a slight scroll will wake my computer, which is very annoying.
It is a Sony VAIO VGN-NW220F laptop:
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, 64 bit
Processor: Pentium(R) Dual-Core CPU T4300 @ 2.10GHz, Intel64 Family 6 Model 23
[Code].....
[code] Using Windows 7 Professional, 32-bit, after the system has gone to sleep using the Function-F1 key sequence, it occasionally has trouble waking up. It will start to wake up, spin the hard drive, and the screen may come up, but then it locks up. Pressing the caps-lock key does not light up the caps lock, so it looks like the keyboard is locked up. Also, when that happens, the mouse is locked up and the pointer cannot move.
View 4 Replies View RelatedI've tried removing AVG using their removal tools and instructions. I've tried fully removing my video and mobo drivers with driver sweeper and installing the latest GPU and Motherboard drivers and flashed the latest Motherboard BIOS. I've scoured forum after forum and seen similar issues and tried countless solutions. I haven't seen someone with my -exact- problem and -exact- spec/error reports so I'm caving lol. I build and maintain PC's as a hobby and I like to solve problems on my own know-how but I am at wits end with this BSOD.
Quick specs:
Windows 7 Ultimate 64-bit
8 gigs DDR3 Gskil
AMD Phenom II X4 955 Denab
Nvidia GeForce GTS 250 (x2 SLI)
Asus M4N75TD nForce 740a Malwarebytes Antimalware
My laptop just wakes up from Sleep, while on battery. It's soooo annoying! I have this info from a CMD command. Maybe, it's relevant?
Info: Command I entered on Command Prompt: PowerCFG -LastWake .
Result:
Wake History Count - 1
Wake History [0]
Wake Source Count - 1
Wake Source [0]
[code]...