Running a dedicated PC ( dedicated to television ! ) with a Hauppauge 2250 tuner card.
Recording works fine if the PC is active ( not asleep ) but if I set up something to be recorded ( OTA channels only ) when I'm not around, using the WMC guide, it will not wake up the PC from sleep mode and record the program.
Everything I am able to find says that WMC WILL wake up the PC so I suspect it is some obscure setting buried 138 levels deep on some obscure panel path but I sure can't find it !!
I know MCE gives you the option once to go to list view. But if you don't do it at the first offer, how can you toggle to list view (and perhaps back to normal view) after that? I can't find anything in settings, etc.
i have my drive partitioned 80 gigs for windows 8 consumer preview and 400 ghigs of space for 7 but where does 7 store my recordings... want to watch them on 8?
I have just updated to Windows 7 from Vista. I am now unable to hear my recordings when using Skype Echo testing. I have gone to control panel to check settings and the speakers are fine. How do I check the microphone?
Asrock Z77 Extreme4 Ivybridge i5 3570k 2x4GB Crucial DDR3 1600 DIMMs OCZTech 600W PSU Generic CDRom, Seagate HDDs mirrored, WD Primary HDD. No GPU connected as she won't need one.
At first I tried a mild overclock at 4.4ghz and stability tested with P95 for a few hours with no errors at all. Everything worked fine!Come time for her to actually use it, of course, BSOD's ensued, followed by boot looping.Boot loop would not stop until one of the DIMMs was removed.Naturally I thought the RAM was the culprit and tested the sticks using Memtest86, 4 passes each with no errors.Next tried single sticks of RAM in each slot, booted up fine. Tried with two sticks (1&3, 2&4), and it seemed to work fine if booting from a clean shutdown (as opposed to BSOD).Reverted to default BIOS settings and it seemed to help a little, as in it would actually wake from Hibernate a few times, but then out of nowhere would BSOD again.I read somewhere that a bent cpu pin might do this, but since a single stick worked on each of the 4 slots, I think this can be ruled out.BIOS are upto date with latest 2.20 version as well.Right now the computer is working fine with only one stick of RAM, the last BSOD happened with two sticks in, opening up Photoshop and InDesign at the same time with stock BIOS settings.
So as some of you may remember, I had problems getting Windows to sleep before. Those got fixed and have been running fine for awhile now. Goes to sleep on its own now.
However, the problem I had before is back and has been going on for awhile. When I wake up the computer, whether it is scheduled in the morning for back up or I do it on my own, more often than not, it freezes a few minutes after waking. I can get logged in, start doing stuff, and then it freezes. Doesn't do it every time as I've had it go for days between freezes with several wake ups in between.
I doubt it is hardware related as I have checked the memory, I have turned down my overclock a bit in case it is processor, and Ubuntu will go to sleep and wake up with no issue. I doubt it is hard drive related as when I had to fix the sleeping issue, the whole hard drive was wiped and then reinstalled so the file structure is different. As the same stuff, services and applications are turned on with each restart, that shouldn't be the problem. Firefox causes script issues in Ubuntu on both my desktop and laptop so I am going to back to Chrome and see if that does it, but I doubt it because I have awoken the computer with Firefox off.
sometimes when coming out of sleep mode I'll be greeted with the boot screen. Upon logging into Windows, I get the "Windows has recovered from an unexpected shutdown" error:
Code: Problem signature: Problem Event Name:BlueScreen OS Version:6.1.7600.2.0.0.768.3
There is a schedule task that has been waking my PC since about 4 am this morning, it wakes my PC every 5 minutes so I am having to power off my PC to stop this from happening.What it the cmd toold that will tell me the last schedule task that woke my PC, and how do I then go about stopping that task? The reason I am asking is because I have looked in the schedule task manager and can't it.I know it's not the LAN or any USB devices as I have disabled them in the BIOS.
Everytime my Windows 7 Home PC wakes from sleep mode, there's no internet connectionWhen I run the Troubleshoot Problem tool, it always has to reset the LAN which fixes the issue. How do I resolve this issue for good?
When I put my computer in Sleep mode, using the start button / shutdow / sleep it "sleeps" for about 10 minutes and wakes up on its own! Could it be programs trying to run in the background that wakse it up; Carbonite Backup or Norton? I can't get the computer to remain in sleep mode!
I have Windows 7 Ultimate x64. I just recently decided to start trying to put my PC to sleep rather than just let it run constantly when I'm not using it, and found that when I resume it, even if it's IMMEDIATELY after putting it to sleep, there is no sound.The only "fix" I've found is to either reboot, or (the quicker method) is to disable and enable the sound card in device manager. Sound then immediately returns.Obviously this is far from ideal and I'd love for it to just function properly. Any ideas? My sound is onboard Realtek HD audio on a Biostar A770E3 motherboard.
I have no speaker sound when the computer wakes up from sleep mode. (Realtec high definition audio). The only work around I can find is to unplug the jack at the back and plug it in again. Is there a way to solve this issue
I have a Lenovo e525 laptop with windows 7 ultimate x64 and a second hard drive where the dvd drive was, when I wake from sleep any of the following can happen: - It wakes but the screen is dimmed and the brightness buttons donīt work so I have to reboot. - It wakes to the screen off, I have to reboot. - It wakes then after up to 30 seconds an error pop up shows and the laptop reboots without shutting down. - It wakes then after up to a minute it reboots without shutting down. - It wakes fine and I can use it, 1 out of 10 times.
I just installed the beta on a notebook. Everything works fine except for one thing. If my notebook wakes from suspend the screen comes up to log-in but within seconds the screen turns black and my notebook reboots and comes back with an error (start in save mode or start.
My computer will BSOD after waking up from it's sleep. Now it wasn't a usual occurrence, it just lagged but lately it always went to blue screen after waking up.I checked, there are no Flash Drives plugged in, but the USB for the wireless mouse is plugged in but that never had any affect before.
I have a Logitech M570 trackball mouse, which Windows calls "HID-compliant mouse". I have already unchecked the box in device manager, with no luck. Even a slight scroll will wake my computer, which is very annoying.
It is a Sony VAIO VGN-NW220F laptop:
Tech Support Guy System Info Utility version 1.0.0.2 OS Version: Microsoft Windows 7 Home Premium, 64 bit Processor: Pentium(R) Dual-Core CPU T4300 @ 2.10GHz, Intel64 Family 6 Model 23
[code] Using Windows 7 Professional, 32-bit, after the system has gone to sleep using the Function-F1 key sequence, it occasionally has trouble waking up. It will start to wake up, spin the hard drive, and the screen may come up, but then it locks up. Pressing the caps-lock key does not light up the caps lock, so it looks like the keyboard is locked up. Also, when that happens, the mouse is locked up and the pointer cannot move.
I've tried removing AVG using their removal tools and instructions. I've tried fully removing my video and mobo drivers with driver sweeper and installing the latest GPU and Motherboard drivers and flashed the latest Motherboard BIOS. I've scoured forum after forum and seen similar issues and tried countless solutions. I haven't seen someone with my -exact- problem and -exact- spec/error reports so I'm caving lol. I build and maintain PC's as a hobby and I like to solve problems on my own know-how but I am at wits end with this BSOD.
Quick specs: Windows 7 Ultimate 64-bit 8 gigs DDR3 Gskil AMD Phenom II X4 955 Denab Nvidia GeForce GTS 250 (x2 SLI) Asus M4N75TD nForce 740a Malwarebytes Antimalware
We have about 500 laptops with win 7 pro x64. We have had a few complaints that on occation, after a computer wakes up from sleep mode, the user sees the welcome screen, but no text or logon box - i.e. they can't se any text or textboxes, only the background image of the welcome screen. The only way to end this state is to poweroff/reset the machine.
I was hit with a smarthdd infection, which has been successfully removed. However, (whether related to it or not ?) after having this infection the pc has been randomly "not responding". It may go for 24+ hours and not freeze up at all and I think it's fixed, but then it does it again. It usually happens more over a longer period of inactivity, but not always.If I leave the pc alone, the screen saver comes on and does it's thing. But sometimes when I come back, move the mouse, click on an icon and I get that little blue circle spinning (windows "not responding"). Then mouse and keyboard commands are non responsive - the mouse does move around the screen with no problem. I have to hold the power button down to shut off, upon restart the pc runs absolutely fine, from what I can see.When it freezes, sometimes the taskbar (usually hidden) will pop up, other times no. I have a desktop gadget clock installed and have seen when it has frozen, which is prior to when I have attempted to wake up the pc, not AT the time of wake up. I haven't had any issues of it freezing while using the pc (working offline, browsing, music, video etc). The machine is working very well, other than for this random exception.
I have played with power settings - thinking that it may have to do with the machine sleeping and not waking up, but even if I have it set to "never sleep", it still freezes.This seems to be a common issue but very difficult for a "non expert" to diagnose/navigate on my own.
I sometimes will wake up my computer and it restarts itself, it gives me this error upon startup again.
Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.256.1 Locale ID: 1033 Additional information about the problem: BCCode: 1e BCP1: FFFFFFFFC0000046 BCP2: FFFFF80002EFBEC8
I have just built a PC in the aim of using it as a Home Theather. I have a Media Center remote control and TV card, when I use the remote to put the computer to sleep it seems to work fine However when I use the remote to wake the PC, I get a reboot and unexpected shutdown message. This is also the case when I use the Start -> Shut down options -> sleep or hibernate. I have tried using microsoft debugger and the message I have been seeing is that, AverBas.sys does not have a timestamp and that its symbols can not be loaded. I got this far on my own but I have no idea what to do from here! I have attached the required zip file.
BSOD on an Acer Aspire 5750. It is pretty much brand new, but I have been trouble shooting this for about 3 weeks and have just now learned about the dmp files but am not yet good at reading them.
BlueScreenView seems to point to some kernel exe that is at the very core of Windows 7, but from what I have read it is most surely a driver as it only happens when waking up from sleep.
When attempting to wake up my wife's PC from sleep, the computer will hang for a few seconds at a black screen and then reboot. This is followed by the standard Windows has not shut down properly message asking if I want to launch into safe mode. This has been happening the past few weeks. It's Windows 7 64-bit. I've attached the results of the SF Diagnostic tool.
Stuff I've tried:
- Turning off hybrid sleep
- Uninstalling and reinstalling the Realtek USB WiFi adapter (network adapter problems came up on some google searches)
I just did a fresh install of Windows 7 64bit on my computer and am having a bit of a problem, whenever I put the computer to sleep and wake it up it gives me the BSoD with intelppm.sys as the cause. Does anyone know what this driver is and what it does, any update to stop BSoD etc... Before the fresh install it worked fine with no BSoD, I have check for viruses, I have also installed the drivers I installed before. [code]
I have a HP Pavillion dv6 which originally came with Windows Vista Home Premium x32, recently upgraded to Win 7 x64 clean install, and has been relatively problem-free. But, everytime laptop sleeps, I get a BSOD upon waking up every single time! updated all drivers to latest (compatible with win 7 x64). even updated BIOS. d
