Unable To Hear Recordings When Using Skype Echo Testing?
Oct 29, 2011
I have just updated to Windows 7 from Vista. I am now unable to hear my recordings when using Skype Echo testing. I have gone to control panel to check settings and the speakers are fine. How do I check the microphone?
View 1 Replies
ADVERTISEMENT
Aug 6, 2009
I have a weird problem where I can click on the play icons on this page Sermons - East Liberty Presbyterian Church under "hear the sermon" yet the same page in IE8 doesn't do anything when I click, even though the cursor turns into the little hand icon.
I have flash 10,0,32,18 installed in both browsers, yet IE refuses to play (nor in compatibility mode). Can anyone else duplicate this problem?
I can play other types of audio in IE without issue.
View 0 Replies
View Related
Aug 24, 2012
I have had to reload Skype 3 times and it will still not open
View 2 Replies
View Related
Jun 2, 2012
When I test mi microphone it will captured the sound of me moving my PC but when I speak it won't hear it.
View 1 Replies
View Related
Dec 29, 2012
my labtop crash a guy fix it i can get skpe but just to find my webcam and to take pics, i cant find in my laptop.
View 3 Replies
View Related
Oct 2, 2012
Running a dedicated PC ( dedicated to television ! ) with a Hauppauge 2250 tuner card.
Recording works fine if the PC is active ( not asleep ) but if I set up something to be recorded ( OTA channels only ) when I'm not around, using the WMC guide, it will not wake up the PC from sleep mode and record the program.
Everything I am able to find says that WMC WILL wake up the PC so I suspect it is some obscure setting buried 138 levels deep on some obscure panel path but I sure can't find it !!
View 5 Replies
View Related
Mar 10, 2010
My sound in Windows 7, windows media player, has a little echo.It's like my speakers are at the bottom of a well.Any idea on how to make the sound normal?
View 5 Replies
View Related
Sep 18, 2011
how do i get the echo out of my speakers (windows7)
View 1 Replies
View Related
Dec 28, 2011
how to get echo sound off of aspire one? its making me mad
View 1 Replies
View Related
Nov 24, 2012
i cant understand sounds emmited from my speakers too much echo
View 2 Replies
View Related
Dec 25, 2011
I know MCE gives you the option once to go to list view. But if you don't do it at the first offer, how can you toggle to list view (and perhaps back to normal view) after that? I can't find anything in settings, etc.
View 1 Replies
View Related
Jan 18, 2012
How do i get rid of this limit? wmc did not record the news today becouse of this limit. I dont even remember putting this limt on wmc.
View 1 Replies
View Related
Mar 4, 2012
i have my drive partitioned 80 gigs for windows 8 consumer preview and 400 ghigs of space for 7 but where does 7 store my recordings... want to watch them on 8?
View 3 Replies
View Related
May 9, 2009
I've just installed Win 7 on my Toshiba M100. After installation, the sound driver (Realtek HD Audio) is automatically detected and it works in a very riddiculous way:- In the Sound Setting --> Playback tab --> There're TWO speakers, both are High definition audio device and look exactly the same. If I set the first speaker as default, then I can hear sound from the laptop's speakers but when I plugin my headphone, I can not hear anything !!! If I set the second speaker as default, then the laptop's speakers doesn't work, but when I plugin my headphone, I can hear sound from my headphoneThis is very riddiculous and annoying, having to switch default sound device everytime I plugin or take out the headphone is almost absurd
View 1 Replies
View Related
Dec 14, 2012
i have tryed to log in to skype to day but all it does is log in for ages then come up with an error "skype can't connect" i have tried everything to fix it but nothing works. i have uninstalled it, restarted PC, restarted modem. i can connect to everything else but skype and it was working earlier today.
View 9 Replies
View Related
Mar 6, 2009
I need to test Windows drivers, please can any one tell me how can i perform this testing. I am doing this very first time.
View 7 Replies
View Related
Jun 10, 2011
I want to make triple sure that a certain drive is good.What's the best utility to use to confirm or otherwise...??My baseline assumption is to pull the mftr's own bootable utility disc and use that.
View 6 Replies
View Related
Jun 1, 2011
After numerous attempts, Windows install keeps stalling at the "expanding Window's files" screen, then cancels the install. (Bios checks ok, disk has no scratches, and both DVD writers return the same results.)To help prove the integrity of the SSD (still under warranty) I would like to now try doing a temp OS install on another internal HDD. There are 2 of those, each with data on them. Each HDD has only one large partition, as in drive D & drive R.What is the detailed procedure in preparing one of those HDDs in order to accept a temporary OS install, while still preserving the existing data on that physical disk? I must also be able to identify which disk is which (new partition?) when it comes to finding the "new" disk when loading the Windows 7 install software?
View 9 Replies
View Related
Dec 6, 2011
I work for a college that needs 2 and possibly 3 bootable partitions for testing.I might need the 3rd due to conflicts with the testing programs not liking each other. The hard drive has 3 50gb partitions with another 80gb unallocated on a 250gb hard drive.I have successfully done a XP followed by a 32 bit Windows 7.I tried to put Windows 7 on the third, and it didn�t ask where to install.I just started to install without asking where to install.Because of this, it wiped out the boot manager of the disk and had to re-partition the disk.I am just wanting to know if this would be possible to do.
View 9 Replies
View Related
Apr 10, 2012
Is there a good hardware testing program to test if im having hardware issues or windows issues how about reverse a good windows program to test?
I mean is only way to reformat and reinstall windows to tell if its a windows issue? Not big deal but does take all day plus I don't want kill the stupid mother board by over working it if its a mother board issue.
View 4 Replies
View Related
Oct 20, 2009
Having spent a while checking which of my existing applications will run under Windows 7 I have now learned enough to realise that my conclusions may have been affected by XP Mode which I believe exists only in Windows 7 Professional & Ultimate.
My current copy of Windows 7 is the Windows 7 Release Candidate which I believe is Windows 7 Ultimate, but the PC I hope to buy after Christmas will most likely be Windows 7 Home Premium.
Can anyone advise how I inhibit XP mode so I can test compatibility with Home Premium and/or how I can tell whether a legacy applications is running in Windows 7 Ultimate courtesy of XP mode, and therefore may not run under Windows 7 Home Premium?
View 3 Replies
View Related
Aug 20, 2012
I purchased a computer from eMachines for around $200 last year. I had originally bought it because the case was nice and easy to work with. I changed the 1 core Celeron 1.6Ghz to a Dual Core 2.2Ghz. I also upgraded the ram from 2GB to 4GB DDR2.I later started to get blue screens with the error "IQRL_LESS_OR_NOT_EQUAL". I brought it into my local Tiger Direct and a technician said that I had crashed sectors in my hard drive and to buy a new one and re-install Windows 7. I did so and about a few hours after, the system crashed again with the same error. I brought it back to them and they did thorough tests on every component and said that everything was fine. The computer has almost no third party software on it besides Google Chrome, Java and so on and so forth. But it keeps crashing. I figured it was the ram, but after testing it with MEMtest for 6 hours, nothing. I figured it was the GeForce 210 graphics card, so I installed the most recent drivers. Tiger Direct and I pretty much tried everything there was to try, but it keeps giving me IQRL_LESS_OR_NOT_EQUAL.
View 4 Replies
View Related
Feb 28, 2012
I would like to know Windows 7 ES limitations in terms of LOAD testing, system testing. Also general usage limitations of it.
View 1 Replies
View Related
Sep 30, 2011
beginning of the week I purchased a new pc with windows 7 home premium sp1 64 bit, I installed my copy of office XP, the first time I loaded word I was asked to download 'Hotfix' I have been searching for this on ms websites but have found nothing that explains what it is, I have received an email from ms which states 'WARNING This hotfix has not undergone full testing.
View 2 Replies
View Related
Sep 24, 2012
I have a problem (though I think it is minor because my system recovers quite well from it after restarting). Basically, I overclocked my CPU to 4.19 gHz and everything is running smoothly (also got a Radeon 7770 HD graphics card) so I decided to redo my WEI score and close to the end of the CPU test the computer crashed and went to the blue screen of death before restarting again. Everything seems fine with my computer but I'm not sure what the problem might be. [code]
View 1 Replies
View Related
Oct 9, 2012
I have 2xSapphire Radeon 6750 1GB DDR5linked with a Crossfire cable. More accurately, this card
Normally I have only two monitors connected, one on HDMI and one on DVI. Yesterday I brought home a third monitor just to test around a bit, to see if I could get a third monitor working. I had the cables so I tried connecting it to either DisplayPort, HDMI or DVI on either of the cards, alternating. So far I have failed. This is not really a big surprise since I got info from Sapphire telling me it would most likely not work, since the cards do not support multiple monitors beyond two.
The most surprising part was Windows. It tried to detect the third monitor as connected via VGA and extend desktop to it. I went along and played with the settings a bit to no avail. The third monitor (an older Eizo) does not have a VGA port.
So I disconnected it, rebooted just in case, and left the matter for another day. To my surprise, Windows still claims there is a VGA monitor, diconnected, but it is there. My display settings: And the "ghost" display setting: How do I remove this last entry of a monitor that is no longer connected??
View 1 Replies
View Related
Oct 29, 2012
Without boring everyone with how it happened. I need help with my USB connection's. If I attach a USB device (anything). I can hear it connect but it does not show in Windows Explorer. I cannot see my IPOD in Itunes either. It's not a case of unplug and plug in again. My USB socket's are OK. It's been happening for ages. I'm about to get a Windows 8 PC and I thought I'd give this one to my son. Before I do, I want to ensure it work's OK
View 4 Replies
View Related
Aug 12, 2011
I have my audio source I have plugged into line in.If i right click on the speaker icon on the tooltray, and select 'recording devices' I get the recording window - there I see the "Line In" - the bar graph next to it pumps up and down suggesting my sound reaches the PC.I then double click on "Line In", click on the "Listen" tab, and click on "Listen to this device" - but I don't hear anything.Clicking on the speaker icon i select playback devices, and right click on speakers (I tried the same thing with headphones), and click 'test' I hear the test sound. I select properties and check the levels, they are turned up.I check the Volume Mixer - the things which can be turned up are turned up.
View 6 Replies
View Related
Dec 6, 2011
i plug in my headphones to my laptop the sound still plays like in the speakers instead of my headphones. i dont think theres something wrong with the headphone plug cause the laptop is only 3 months old.... i have a HP dm4-2050us...
View 6 Replies
View Related
Jul 23, 2012
Whenever I watch an internet video I don't hear sound, voice or music. What is not tuned on? Using IE9 browser.
View 1 Replies
View Related
Nov 27, 2009
I recently upgraded to Windows 7. Since the upgrade, my microphone has not worked. The input volume is too low to be heard, even at max volume and mic boost.
I've tried disabling and re-enabling it, and adjusting every bar I can find that concerns to max. Neither has produced a result.
I'm tempted to un and re-install the mic, but I don't know where my driver disk is, so I'm afraid of doing irreversible damage.
Does anyone have any suggestions?
View 8 Replies
View Related