I have 3 accounts setup in my outlook 2010. Usually when i open my program it would open the dafault email adress first. Now it just loads a random one that i do not want to see first. I've tried removing the account but that does not work because it still appears in the sidebar without the mail getting sync and i can not deleted it. How can i change what email adress is open by default, also how can i delete that account that no longer sync, there is no delete button when right clicking
Under Win 7, I have Outlook 2010 installed with 3 email accounts. When I open Outlook it searches each account for new messages. I would like it to search only one of them.
Am trying to printout an email from Outlook 2010. When I go to print the print preview shows a small dash in upper left corner and the number of pages to be printed ranges from 32 to 112, depending on the email. It prints the dash mark and continues to spit out paper. It's not a printer issue, as I've tried 2 different ones.
I have a specific email contact who can be reached directly through my Gmail on Google but every time I send directly from Outlook 2010 the email dies as "Invalid Recipient". This applies even if I am replying to a received email from that person so it is not a typo or similar personal error and it is the only contact which behaves like this.
I have recently changed my ISP to BT from Eclipse. Previously Outlook 2010 was configured to allow emails to be downloaded from the Eclipse servers and to enable me to send emails using Outlook 2010 using my Eclipse email address. I also have Outlook configured using IMAP to enable me to download emails from Gmail. I can no longer send emails using my eclipse email account.How to reconfigure Outlook so that I can send and receive emails using the Gmail servers from Outlook 2010 as my primary email source.
I have a problem with Outlook 2010 that is driving me nuts. Whenever I send an email with an attachment upwards of 4Mb it goes through the sending process then comes up with a send error. The attachment has in fact been sent but remains in the out box as though it hasn't and then it keeps sending it over and over until I catch it and delete it. I have Windows 7 home Premium on a Toshiba Satellite 5000 with 4Gb RAM.
I've just upgraded to Windows 7 and have installed Office 2010 which I also had on Vista, in Vista however my email [URL]was part of personal folders, but now they are separate, I'd like not to see a separate menu for [URL] but instead have all my emails under the Personal Folders menu
I use Outlook 2010 to process several email accounts. I noticed a few days ago that a couple of the email accounts had vanished from the list. I also noticed that one still present was not sending or receiving. I tried re-entering the password and when that didn't work I deleted and re-entered the account. It tests fine but the test message never shows up in my Outlook inbox. It does show up immediately on my phone when I check my mail there.
When multiple accounts are added on Outlook 2010 and you create a new email, autocomplete in the 'to' field shows suggestions from every account. Is it possible to only show suggestions relevant to the account the email is being sent from.For example, if I had my personal account and a customer services account, when I go to send an email from my personal account, every email address who has ever communicated with the customer services account shows which is quite risky.
When I click to open the outlook on my windows 7 operating system it says loading profile for ages then and error message appears with "Can't open your default email folders. Express can't open. Your server may be down for maintenance."
I've been trying to create a Task in Outlook from a Word Document that I have created on this computer. The idea is that a shortcut to the document is created as an Outlook Task. Click on the shortcut, and voila - there is the document.The "Create Microsoft Office Task" icon DOES send the document to Outlook as a Shortcut in a Task, however, when I open the task, Outlook says:"Outlook blocked access to the following potentially unsafe attachments: Shortcut to 'document name'."It's NOT an unsafe attachment; Outlook WILL OPEN this document if I send it as an email attachment. Outlook will open .docx files types.
I am trying to move one pst file from one laptop which has Outlook 2010 32 bit to another laptop which has Outlook 2010 64 bit installed, steps taken 1) Copied the pst file from the User/AppData/Microsoft/Outlook folder to usb. 2) Pasted the file from usb into User/Documents folder. 3) Tried to open the file in Outlook and I get the error that Outlook encountered errors while opening the file. Now how is that possible when the file is working perfectly in one laptop but when I copy and paste it into another it gets corrupted? Is it due to 32 bit to 64 bit outlook? I tried to repair it using scanpst and it brought back few mails?
I have a new Dell Inspiron 14Z running windows 7 pro 64bit and i'm using Microsoft office 2010. I'm trying to retrieve archived emails that i backed up on an external hard drive from a previous computer, the files are .pst which is an outlook format but i keep on getting an error message saying the file is not an Outlook data file (.pst). i dont have any other way to retrieve these emails since they were deleted from the server and its about 1.5 years of work emails. Not sure what to do? should i move the files from the external driver to a different location on the computer and open them, or are they corrupted and need to be fixed?
I have Windows 7 64-bit pro with Outlook 2010 installed on a Dell laptop. Is there a way to configure Outlook email to sync with my work email? Activesync works perfectly on my phone so that portion of the network is open at my work. I have been doing some reaserch and in order to get Outlook to sync with Exchange Server without VPN, RPC over HTTP or Outlook Anywhere must be enabled on the network. I know for a fact that our IT department have that portion disabled.
i am running windows 7 64 bit i have microsoft office 2010 minus outlook, so i have just bought outlook 2010, installed it,but every time i try to open now i get a pop up saying the server is unavailable?
I'm running Windows 7 Professional 64-bit and Microsoft Home and Office 2010. Everything was working fine yesterday, but when I came back to work today and attempted to open Outlook 2010, I instantly received a message saying: "Outlook failed to launch in safe mode. Do you want to start repair?" If you try to open it again, it opens a second process of OUTLOOK.EXE*32 in the Task Manager. Here is what I've already tried to do while troubleshooting:
- Restarted the computer - Performed a MS Office Repair, it completed, rebooted (Did this twice) - Uninstalled MS Office 2010, rebooted, reinstalled it, rebooted, but same problem occurred - Verified that the other Office programs work (Word, Excel, etc) - Tried to run "outlook.exe /resetnavpane"
I'm currently stumped at the moment. I cannot even access the profiles through Control Panel > Mail.
Outlook won't send emails. I get "sending reported error (ox8004010f): The operation failed. An object could not be found." I see other has had the same issue
There are a lot of questions about this and none of the proposed solutions seems to work for me. Now that MS has moved on to the 2013 version of the software, it still does not work on 2010. What did people do? Here is the problem have a .pst file from Outlook 2007 on an old computer. I want to use that same .pst file on a new computer running Outlook 2010. I want all my new mail to go to the old .pst file and nowhere else. Now here is what I've tried and what seems to happen:When starting O'2010 it needs your email address. I create that but then it creates a new .pst file named myname@mydomain.com.pstAnd it creates it in C:/Users/myname/AppData/Local/Microsoft/Outlook. If I try to move the new .pst file to the folder entitled C:/Users/myname/Documents/Outlook Files, then when I restart Outlook it recreates the deleted .pst file back in the AppData folder
I have just completed transfer to a Solid State Drive using a clean install of win 7 and all programmes etc.Everything appears to be running well but I need help in restoring my Outlook account. On first starting Outlook on the new drive I was asked to set up an account but obviously don't want to end up with two of them so I backed out.I do have my original .pst file backed up to a memory stick.
I`d like to know how to backup the outlook :contacts,emails, archive. I try this way ! File/open/export/export to a file/Outlook data file( pst.) browse location/Select Folder to Export From/etc.maybe i did wrong!I have 8 gb to backup and the is a sign said that icant backup more then 4 gb .
I do not get a Page set up dialog box when I click Print - only a Print Options with Properties that if you change gives a message saying that some of settings changed may not work in Outlook and to use the Page Setup dialog box
I used to be able to conect to my office email from my home computer but I now get an error message code 20 that mentions something about a "proxy server". Is there a fix within Microsoft 2007, itself, that can fix this? Or do I have to purchase one of the MANY registry repair programs?
I'm trying to move outlook 2003 .pst to outlook 2010 on a new computer running windows 7. I have copied the ..pst from the 2003 XP machine to a flash drive and copied them into the outlook folder on windows 7 under documentments/outlook folder which is new in 2010. I have already created a single pop account in 2010 and been using for a couple of weeks while trying to move the old 2003 pst file. It seems simple, have read enough how to's but nothing seems to work. How do I do this.
