High Idle GPU Temp - Warm Palm Rest Area
Jan 17, 2013
After I used a System Image to restore my laptop, I think I am feeling my right palm rest area of my laptop to feel warmer than what I can recall from before the System Image. The right side of my laptop is where my SSD is located and since I have a SSD instead of a HDD, it shouldn't feel warmer. My fan also is quite hearable now...I think it has to do with my GPU Temp? It is always around mid-40Cs when it is on idle...
What other options might be causing the fan to keep spinning and the right side of the palm rest to be warmer? My GPU load is around 1%...And does my GPU Temp rise even more when I am charging the battery? I just charging the battery and it is up to 51C idle! I do not think there is a build up of dust or other things where the vent it.
View 1 Replies
ADVERTISEMENT
Oct 10, 2011
I have this problem with Asus p5q3 motherboard my system temp goes up to 60-70(celsius) and cpu (intel core 2 quad q9550) temp is low as 30-40(celsius). So how can system temp be that high?
View 3 Replies
View Related
Oct 10, 2009
For some reason I have 2GB (out of 4GB) of RAM being and my laptop is slow in general. Even typing this it's lagging.
I take it this could be a virus?
View 9 Replies
View Related
Apr 19, 2012
So I have recently installed Speccy, and I noticed that while idling my motherboard tends to sit around 55-60c (in the orange) and my HDD usually sits around 37c.
However, as of today, my motherboard was 63c and my hard drive was 54c.
I was curious if this was normal, as I am currently running a Disk Defragmentation or if I should go to Best Buy tomorrow and get a can of compressed air.
A link to a speccy screenshot below: [URL]
View 9 Replies
View Related
Dec 24, 2012
I've got 2 HD5870's in crossfire that have been running fine for about 8 months but now the fans are running very fast after boot.AMD Catalyst is reporting temps of 90-92 degrees and fan speeds of 60% when I have no applications running. I've checked Task Manager and nothing seems out of the norm ( at least checking CPU/RAM usage, that doesn't reflect on GPU usage).
View 9 Replies
View Related
Apr 17, 2011
My CPU idle temps increased A LOT after windows updates (Ultimate 64). And not just after rebooting, but all day long. Just in idle. When I start any work on the laptop, it drops to normal levels. Scary, cause I make pauses often and let it shutdown the screen and sleep. What a surprised when I return to work and check it reached 70C when it was supposed to be cooler than before, obviously. Once I touch the mouse and resume working, it drops fastly and everything seems to be normal. WTF? And its happening only after updates, and only on Ultimate, because when I had Home Premium it never occured.
View 2 Replies
View Related
Aug 29, 2011
I recently reformatted my computer for this issue but it did not seem to help. Right after I turn my computer on, and my few programs boot up, my computer sits at 1.35 Gb of ram usage. After playing even a single game it jumps to about 1.60 Idle. The only programs I have turned on are Steam, EVGA Precision and nvidia control panel,etc. Here is a list of the processes I have running, where are they coming from and is something wrong where it's taking up this much memory?I was also dealing with a problem of my CPU using 25% for system interrupts after waking up from sleep, I noticed a lot of errors/warnings in the event log, I'm wondering if these could have something to do with it.Only the ones for AUG 29th are since I turned on my PC today (and didn't let it go to sleep)
View 6 Replies
View Related
Jan 25, 2011
I have Windows 7 Ultimate, 64 bit with 6 GB of Ram and SSD. After restarting the comp, the memory use is around 23% (of 6 GB). After working on it for a while, running browsers, spreadsheets, playing a game the memory use just pretty high (with just a few browsers open and Football Manager around 80%).
However, the problem begins when I close all the programs, essentially going to fresh, post restart state. In this idle state, the memory use if just over 60%. This obviously seems wrong. This is over 60% use of physical memory. What is the issue here, memory leak or something else. Occasionally, when I have a bunch of things opened, the computer will hang because the memory use is at the peak.
View 4 Replies
View Related
Jul 4, 2012
Ok I am sitting here watching taskmanager, winword.exe is hovering between 10-11% cpu usage (with it now in background idle) and 20% or more when I do activity in a winword window.This seems abnormal a word processor needs so much cpu power even when just sitting idle, to give you an idea 10% on my current cpu would probably equate to about 80% on my laptop's celeron which is absurb for a word processor.I currently have 10 documents open, it seems to use about 1% per document, all documents are text only and average 1 page long.
View 3 Replies
View Related
Jun 14, 2009
I remember a functionality in Vista/XP where you could hold the SHIFT button for a warm reboot which effectively avoided having to go through BIOS POST.
I have tried this in Windows 7 however no luck.
Has this been removed? if so that suck cause i have a RAID controller which takes a long time to go through all of its tests/init.
Anyone?
View 9 Replies
View Related
Apr 11, 2011
Well I had some RAM and it shown ONLY 2GB OF RAM. So went out and BOUGHT new RAM 4GB put it in then all i saw was 2GB! After doin' a bit of research I knew that the old RAM had 4GB (I got my computer tweaked so I didnt know) Is there a way to make this show or anything?
View 9 Replies
View Related
May 4, 2011
What was the really needed time for computers to rest?If you use it for 16hours..playing will it shorten your Hard drive life?and can it actually overheat your system if you wont let your PC rest for a while?? well my fan was burned.but i dont actually play 16 hours..it was just 2 hours 3 times a day,randomly. .
View 9 Replies
View Related
Jul 8, 2012
My desktop of laptop only has the cursor rest all vanished, maybe I pressed something wrong, moreover it does not switch off
View 1 Replies
View Related
Dec 13, 2010
I want to install my palm on windows 7 and ideas on what exactly to install so that it runs.
View 2 Replies
View Related
Sep 27, 2012
I am considering the purchase of a "Gigabyte GTX680 SOC 2gb" video card (Link) but I am starting to wonder whether the rest of my system's components should be upgraded first. I am thinking that they may be too much of a performance bottleneck to warrant the purchase of the new card.I currently have: i5 760 - overclocked to 3.4 ghz 8gb DDR3 1333 MHz RAM, probably will buy some 2133 MHz when I get the card 750W TP-750 Antec PSU GA-P55-USB3 motherboard, with two x16 GPU slots (one operates at x4 when in crossfire/sli though) HAF-X case,Acurrently have an HD6870 and will buying a faster card be that much noticeable with the system that I currently have? Or should I spend the money on upgrading the rest of the system first?
View 2 Replies
View Related
Nov 27, 2012
I just checked my C: Drive for usage and it says that I am using 351 GB. I have 331 GB left, but I am curious as to where the usage of that amount of hard drive space is coming from. I hardly have any programs because of the clean reinstall and the current program sizes are no where near that capacity. The videos and pictures I transferred over combined it about 50 GB. Where is the rest of my disk space? I would like to clean my hard drive as much as possible. Restore points are also limited to using 10 GB as max. I have run CCleaner and Puran Defrag at least twice.
View 9 Replies
View Related
Jan 3, 2011
Windows 7 likes my Palm desktop software just fine. I am having trouble getting the hotsync manager to work, though. I've set it for local USB, but am still not getting it to recognize my PDA. I need v4.1.4 for compatibility with my Tungsten E2. The newer version, 6.2, won't work with it.
View 5 Replies
View Related
Dec 7, 2010
Have owned a Palm Z 72 for about 5 years now and have loved it. The only problem I have ever had is an occasional freezing up which does not last long. Now though I am in serious trouble. The little pin inside where you plug in to charge it seems to have broken off and I have no way to charge it.I cannot hot sync anything to my computer because my desktop died and I purchased a laptop with Windows 7. There does not seem to be anything for Windows 7 for or at least I can't find it.I have bought a Palm Pre Plus phone and you would think I could get these 2 to talk to each other, but it's beyond me.
View 5 Replies
View Related
Mar 1, 2011
Installation CD for Palm Tungsten E windows 7?
Code :[cpp][flash=320,240]http://polmone tungsten e2[/flash][/cpp]
View 1 Replies
View Related
Apr 17, 2011
I have a palm 515 palm pilot and it will not hot sync with windows 7.
View 4 Replies
View Related
Aug 5, 2011
I had an old PALMONE PDA device with lots of emails and tel. numbers.This has stopped working. I had saved ithe data on a storage card. How can I read the data on my Windows 7 computer to retrieve it.
View 1 Replies
View Related
Jan 11, 2012
I have a Palm Tungsten E with years of data on it. I now have a business computer with Windows 7 Pro os. I would like to sync my Palm data with the business computer but have not been able to figure out how to accomplish it.
View 2 Replies
View Related
Oct 11, 2012
I would like to know about VMWare Player. First of all, I would like to know about the bios setup in VMWare. Now what I want to know is if the bios acts the same as the actual bios setup in my computer. And also, there is a Wake on Lan option in the VMWare player bios setup. Now does this really work and wake up other computers when they are off or in standby? That is what I really want to know from you. And I also would like to know on what kind of computer manufacturers work with my VMWare player.Does HP, Dell, Acer, Asus and all the rest of the companies work together. Like lets say that I downloaded Windows 7 and put in my VMWare player, and then I went to my system properties, what would the computer manufacturers be? Like what would it say? Well for my computer I have an Acer Aspire 5733z model notebook. Now lets say that I downloaded a driver, like a lan card adapter for a Dell Optiplex computer. Would I be able to download that driver on my VMWare Player? Because I know that VM Player is virtual, and it is not my actual computer, which is my Acer Aspire 5733z. It is just powered by VM Ware.
Now for example, my Dad at work has a Dell Inspiron mini netbook, which is a 1012 model. And he has a Dell wireless lan card in his computer at work. And I also installed Team Viewer on his netbook computer. Now like every time he goes home and leaves work, he shuts down his computer, and his Team Viewer ID number goes away. And I do not like that at all when he shuts down his computer. Because once, it is shut down, I cannot make his ID number come back online, because his computer is off at work.Now what I was wondering was does the Dell wireless lan card have Wake on Lan settings on it in the properties of the network adapter? Because I tried everything to wake up and turn on his computer, but nothing just would work for me. By the way, he is not on a Lan, he is using a wireless connection, from a Dell wireless lan card, itself in his Dell Inspiron 1012 mini netbook computer.Now I would really like to know on how to wake his computer up, if it is possible. So just let me know on how to do this for me, step-by-step. All righty? And I would think that VMWare player works just like an actual computer with the bios setup, and everything. And if I download a certain driver, that should work too, I am assuming. So just let me know if this process will work. So that is that part.Now the next part I would like to know from you, is I want to get some Mac addresses from certain people. Like because I have a lot of friends, and they need some help on various things on how to troubleshoot issues on their computers. And for this I would need to use Remote Desktop. But lets say that their computer was off, and not turned on, and I needed to turn it on. Could I turn on their computer remotely with their mac address if I knew it? But I am assuming that I can turn on any computer if I had their mac address.And I do not have a Wake on Lan option in my actual real bios setup. So for that, I would have to enable the Wake on Lan in my VMWare player bios setup. The VMWare bios setup is by American Megatrends. So that should work. But mainly what I am saying here is that, I would like to know on how to get someone's mac address, by using an IP scanner, or a mac address scanner.
View 1 Replies
View Related
Nov 28, 2011
I recently reinstalled Windows 7 on my laptop. Prior to formatting, the mouse was working PERFECTLY. After formatting, the mouse is acting much differently. I am using the Synaptics software just as I was before I reinstalled Windows 7, and the mouse pad is MUCH more sensitive than it used to be when my palm hits it. If I type anything in the QWERTY row, my palm never fails to tap the mousepad and it screws everything up (you know how it goes).
I've gone into the Synaptics settings and changed palm check sensitivity and everything else on there that I think would help, and nothing does.
View 2 Replies
View Related
Nov 14, 2012
I purchased Dell Inspiron i14z Ultrabook, it has a hybrid SSD, it have 32gb SSD and the rest 470gb hard drive. It had Windows 8 and I couldn't stand it...I changed the BIOS settings from Intel Smart Response to AHCI, used Wipe Drive, (which detected the hybrid SSD as two separate hard drives) to format both hard drives, installed Windows 7 on the 32gb Hard Drive (I assume this is the SSD part), and everything went great.But when I click MyComputer, it only shows 32GB as my hard drive, how do I set the settings where it would show the rest of the hard drive that is not SSD?Whenever I change the AHCI setting back to Intel Smart Response Technology, it gives me a brief Blue Screen of Death briefly, then restarts in a loop.
View 1 Replies
View Related
Mar 22, 2011
I just installed windows 7 ultimate sp1 - Like the title says I'm seeing 35% cpu usage with nothing going on. I googled around and ran traces to see which driver it was, turned out the ahci driver was doing it. The USB driver showed similarly high latency but that can be delt with later. Most forums recommend upgrading your drivers but this problem has stayed constant both with microsoft's stock drivers for everything and after running windows built in search for drivers even after I manually grabbed the latest drivers for everything. url...BIOS is up to date4 GB RAM - Corsair something or otherEVGA Geforce 8800 GT450W psu1 DVD burner (sata)5 hard drives (sata) plugged into all but the first sata port because that caused nothing but headaches for me. Update - switching from AHCI to IDE in BIOS fixed the problem.
View 3 Replies
View Related
Oct 2, 2009
my computer is old and has small hard drive space, and someone recommended I delete my %temp%, my temp, and my prefetch folder, but I was just wondering, since I had to do a whole lot of searching ,and downloading of drivers, (just to make my computer compatible with windows 7), where all my downloaded drivers are? And if deleting any of these folders will screw up my drivers, and give me problems, and I would have to find the drivers again.
(Also I don't really know what the drivers are called, so I can't really search for them) Because I really wanna delete these folders to make my computer faster, because on XP, where my drivers always worked and I never needed to update them, I deleted those folders all the time, and it made it faster because those folders had a crapload of stuff in them, but I don't want my computer to not be compatible with the games/videos/music/etc. I use it for.
View 1 Replies
View Related
Jun 8, 2011
Since Jan-Feb of this year I have encountered the following issue while trying to play games on my laptop.
Abnormally High CPU Usage
Extremely low FPS - After 5-20 Mins of play.
Extremely High latency to servers - from 300 - 900 after 5 - 20 mins of play.
The thing is all of these started 1 year after I been using this laptop, after a full year of everything running flawlessly all these issues kicked in after I performed a clean install in Jan., I even performed one in Feb. and one 3 weeks ago
Here are my specs:
OS Name Microsoft Windows 7 Home Premium
Version 6.1.7600 Build 7600
System Manufacturer Dell Inc.
System Model Studio 1558
Processor Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz, 2400 Mhz, 2 Core(s), 4 Logical Processor(s)
Installed Physical Memory (RAM) 4.00 GB
Name ATI Mobility Radeon HD 5400 Series
Adapter Description ATI Mobility Radeon HD 5400 Series
Adapter RAM 1.00 GB (1,073,741,824 bytes)
View 9 Replies
View Related
Mar 27, 2009
Are there any decent Monitoring gadgets for measuring Core / gpu / HDD Temps out there, as I can not seem to find any?
I have been overclocking so need to monitor my temps for at least the next few weeks and a gadget would be handy, instead of speed fan etc, etc
View 9 Replies
View Related
Oct 18, 2011
I've been lately noticing outrageous temperatures on my CPU. When in idle, it rarely drops below 80 degrees, and when playing/browsing/basically multitasking and the CPU usage goes over 50%, it peaks to 105, 106, 107 degrees. I know I should be worried, and I am. What can I do? Dust the fans off
View 9 Replies
View Related
Jan 5, 2013
I've tried various programs to read the cpu temp such as;Core temprealtempSpeedfanAnd on everyone of the programs I get the same error that it can't load the drivers and i've been searching for a fix for about an hour so If anyone has any ideas or has had a similar problem please respond
View 9 Replies
View Related