High Motherboard/HDD Temperatures While Idle
Apr 19, 2012
So I have recently installed Speccy, and I noticed that while idling my motherboard tends to sit around 55-60c (in the orange) and my HDD usually sits around 37c.
However, as of today, my motherboard was 63c and my hard drive was 54c.
I was curious if this was normal, as I am currently running a Disk Defragmentation or if I should go to Best Buy tomorrow and get a can of compressed air.
A link to a speccy screenshot below: [URL]
View 9 Replies
ADVERTISEMENT
Dec 24, 2012
I've got 2 HD5870's in crossfire that have been running fine for about 8 months but now the fans are running very fast after boot.AMD Catalyst is reporting temps of 90-92 degrees and fan speeds of 60% when I have no applications running. I've checked Task Manager and nothing seems out of the norm ( at least checking CPU/RAM usage, that doesn't reflect on GPU usage).
View 9 Replies
View Related
Dec 28, 2012
I have a PC which I use only for MS Flight Simulator (specs below): I have just added a CPU temp gauge (via CoreTemp) to the desktop and am a bit alarmed at the information it is giving. The PC came with the i7-950 pre-overclocked to 3.8 GHz (and I wouldn't dream of losing this overclocking - Flightsim runs as smooth as silk). I have never had any problems with sudden shutdowns in the two years I have had the PC...
Temperatures at startup show around 50-60degs. When running Flight Simulator they are between 70 and 95 degs, just under the TJMax, but nevbertheless...
The PC was shipped recently from where I was working, in Thailand, to the UK, but I have checked inside the case that the fans are OK and that the big Fenrir cooler on the CPU is clipped in place properly: all fans seem to be turning just fine. No visible dust at all, on vents or fans. Q-Fan is enabled in the BIOS and the fans do vary in speed as I use the PC. They certainly seem to be whirring away (max I imagine) as Flightsim rruns. (What should the CPU fan speed be? The BIOS showed me around 2500rpm I think).
What would folks expect the core temperatures to be for this CPU at 3.8GHz when the PC is at idle? I did try an experiment yesterday which makes me think that the figures showing may be wrong. I put the PC onto Standby (Sleep) last night: everything shut down OK. This morning I started the PC up from its sleep mode - takes about two or three seconds, literally. The CPU temp immediately showed 60degs. Given that my ambient room temperature is under 20degs, it seems a bit unlikely that the CPU would rise 40degs in temperature in the few seconds that the PC takes to come out of Standby. Or not??
Intel Core i7-950 CPU @ 3.8GHz; GeForce GTX 470 GPU, 1280MB; 1 x OCZ Vertex 2E 120GB SSD; 1 x Corsair Force 120GB SSD; 2 x Samsung SpinPoint F3 1TB SATA drives; 6GB KINGSTON HYPER-X T1 TRI-DDR3 2000MHz RAM; ASUS P6X58D-E M/B; 2 x HannsG monitors, 28" & 24"; Windows 7 x64
View 9 Replies
View Related
Aug 5, 2011
Today I bought Windows7 and did a fresh install from WinXP. The hardware changes I made were adding my other 10k rpm raptor hd so I can run Win7 in raid0 config. I couldn't get it to work for WinXP. Everything has gone smooth with all the installation. The problem I'm experiencing is high core temps on my i7-860 quad core. When I had XP installed, I was idleing at 38-43C and running 68-74C while running games. Now I'm idleing anywhere from 42-65C and I'm hitting 95+C while running BFBC2. I didnt notice this until I first installed BFBC2 and it kept crashing on me, during loading my pc shuts down completely. P.S. I am running a stock intel cooler fan(i know....i just ordered a coolermaster from newegg). Although I'm running a stock cooler, under XP my temps were still ok..
SystemSpecs:
Gigabyte P55A-UD3 mobo
Intel i7-860@2.8ghz
4g OCZ ram1600
Asus GTX560 1GB
Xion 600watt PS
2 WD Raptor 10k rpm hd's
View 1 Replies
View Related
Jun 13, 2012
since I got my new setup, temps have gone up like crazy and I cannot find the source of the problem. Using Prime95, my 955BE goes as high as 65-70 degrees celcius. This is at standard clock and voltage, which are 3200mHz and ~1.35v.The cooler I use is: Arctic Freezer 7 Pro and thermal paste: Cooler Master something. Case fans are turned up to medium instead of low and the heatsink seems to be placed correctly.With my old motherboard (M4A77) and this exact same cooler, temps would stabilize at ~54 degrees at full load.
View 6 Replies
View Related
Oct 10, 2009
For some reason I have 2GB (out of 4GB) of RAM being and my laptop is slow in general. Even typing this it's lagging.
I take it this could be a virus?
View 9 Replies
View Related
Apr 17, 2011
My CPU idle temps increased A LOT after windows updates (Ultimate 64). And not just after rebooting, but all day long. Just in idle. When I start any work on the laptop, it drops to normal levels. Scary, cause I make pauses often and let it shutdown the screen and sleep. What a surprised when I return to work and check it reached 70C when it was supposed to be cooler than before, obviously. Once I touch the mouse and resume working, it drops fastly and everything seems to be normal. WTF? And its happening only after updates, and only on Ultimate, because when I had Home Premium it never occured.
View 2 Replies
View Related
Aug 29, 2011
I recently reformatted my computer for this issue but it did not seem to help. Right after I turn my computer on, and my few programs boot up, my computer sits at 1.35 Gb of ram usage. After playing even a single game it jumps to about 1.60 Idle. The only programs I have turned on are Steam, EVGA Precision and nvidia control panel,etc. Here is a list of the processes I have running, where are they coming from and is something wrong where it's taking up this much memory?I was also dealing with a problem of my CPU using 25% for system interrupts after waking up from sleep, I noticed a lot of errors/warnings in the event log, I'm wondering if these could have something to do with it.Only the ones for AUG 29th are since I turned on my PC today (and didn't let it go to sleep)
View 6 Replies
View Related
Jan 25, 2011
I have Windows 7 Ultimate, 64 bit with 6 GB of Ram and SSD. After restarting the comp, the memory use is around 23% (of 6 GB). After working on it for a while, running browsers, spreadsheets, playing a game the memory use just pretty high (with just a few browsers open and Football Manager around 80%).
However, the problem begins when I close all the programs, essentially going to fresh, post restart state. In this idle state, the memory use if just over 60%. This obviously seems wrong. This is over 60% use of physical memory. What is the issue here, memory leak or something else. Occasionally, when I have a bunch of things opened, the computer will hang because the memory use is at the peak.
View 4 Replies
View Related
Jul 4, 2012
Ok I am sitting here watching taskmanager, winword.exe is hovering between 10-11% cpu usage (with it now in background idle) and 20% or more when I do activity in a winword window.This seems abnormal a word processor needs so much cpu power even when just sitting idle, to give you an idea 10% on my current cpu would probably equate to about 80% on my laptop's celeron which is absurb for a word processor.I currently have 10 documents open, it seems to use about 1% per document, all documents are text only and average 1 page long.
View 3 Replies
View Related
Jan 17, 2013
After I used a System Image to restore my laptop, I think I am feeling my right palm rest area of my laptop to feel warmer than what I can recall from before the System Image. The right side of my laptop is where my SSD is located and since I have a SSD instead of a HDD, it shouldn't feel warmer. My fan also is quite hearable now...I think it has to do with my GPU Temp? It is always around mid-40Cs when it is on idle...
What other options might be causing the fan to keep spinning and the right side of the palm rest to be warmer? My GPU load is around 1%...And does my GPU Temp rise even more when I am charging the battery? I just charging the battery and it is up to 51C idle! I do not think there is a build up of dust or other things where the vent it.
View 1 Replies
View Related
Mar 22, 2011
I just installed windows 7 ultimate sp1 - Like the title says I'm seeing 35% cpu usage with nothing going on. I googled around and ran traces to see which driver it was, turned out the ahci driver was doing it. The USB driver showed similarly high latency but that can be delt with later. Most forums recommend upgrading your drivers but this problem has stayed constant both with microsoft's stock drivers for everything and after running windows built in search for drivers even after I manually grabbed the latest drivers for everything. url...BIOS is up to date4 GB RAM - Corsair something or otherEVGA Geforce 8800 GT450W psu1 DVD burner (sata)5 hard drives (sata) plugged into all but the first sata port because that caused nothing but headaches for me. Update - switching from AHCI to IDE in BIOS fixed the problem.
View 3 Replies
View Related
Dec 18, 2011
915 motherboard intel support chipset motherboard sound, vga, usb drivers download
View 1 Replies
View Related
Jun 8, 2011
Since Jan-Feb of this year I have encountered the following issue while trying to play games on my laptop.
Abnormally High CPU Usage
Extremely low FPS - After 5-20 Mins of play.
Extremely High latency to servers - from 300 - 900 after 5 - 20 mins of play.
The thing is all of these started 1 year after I been using this laptop, after a full year of everything running flawlessly all these issues kicked in after I performed a clean install in Jan., I even performed one in Feb. and one 3 weeks ago
Here are my specs:
OS Name Microsoft Windows 7 Home Premium
Version 6.1.7600 Build 7600
System Manufacturer Dell Inc.
System Model Studio 1558
Processor Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz, 2400 Mhz, 2 Core(s), 4 Logical Processor(s)
Installed Physical Memory (RAM) 4.00 GB
Name ATI Mobility Radeon HD 5400 Series
Adapter Description ATI Mobility Radeon HD 5400 Series
Adapter RAM 1.00 GB (1,073,741,824 bytes)
View 9 Replies
View Related
Mar 6, 2011
i just finished my build and i have no idea why i went for a motherboard with 2 slots for ram it can hold up to 16gb but luckly ebuyer sent me out an extra 4gb of kingston hyperx ram so i have 8gb all together but theres a problem theres 4 sticks ! obviously i wouldnt want to send it back so what do ya think either upgrade my motherboard and smash the extra 4 gb in there or keep to my original one i dont have money to blow atall im really struggling if its something that will really make a difference ill go with it if not then ill just keep to my original and when i come to buy a graphics card i will get a 2gb graphics card to help with gaming?
View 3 Replies
View Related
Aug 8, 2011
Since I upgraded my PC, I realized that it won't detect idleness. I set my monitor to turn off after 1 minute, but that doesn't happen. The same applies to anything I set to turn off, or show away after X minutes.
View 9 Replies
View Related
Nov 23, 2009
I just installed windows 7 ultimate x64 and noticed that its using over 5gb of my 6gb of ram, on idle! I have no idea what's going on. Any idea?
View 36 Replies
View Related
Apr 17, 2011
It seems that when I leave my laptop alone to go into sleep mode, the CPU keeps spiking at rather random intervals. Sometimes it spikes to 30% on one core just for a second.I have it set to dim display at 5 minutes, turn monitor off at 15 minutes, and to sleep at 20 minutes. It seems that just before the screen turns off, at about 14 minutes the BFE service and svchost.exe (defragsvc) take up about 50% of my CPU!!I have also seen the ssdp discovery service running and taking up some CPU power aswell?So far I have run a full scan of Microsoft security essentials, Malwarebytes anti malware, and Spybot search and destroy, none have found anything at all.Before the reformat I haven't experienced anything like these spikes. I don't know if that's because I haven't been paying attention to it this much, or if something has infected me, or if something is wrong with my windows 7 installation...
View 2 Replies
View Related
Nov 29, 2012
I have a computer I run as a headless server for serving files and streaming media and a game server I use windows remote desktop to remote in to it and control it.
When logged in with RDP the cpu's idle around 15% (1 or 2 when I turn off the game server) However if i close the RDP client then log back in later.. the CPU usage whilst i'm logged out is around 80-90%?
View 3 Replies
View Related
Jul 25, 2012
On my desktop PC, beside the main HDD with the master-partition I also use a separate HDD which I actually access quite rarely, say once a week.So I want to know if there's any application utility out there which can let me stop the HDD when I don't need it running and restart it when I need it.I want to reduce both the overall power consumption and the wear of the disk.
View 3 Replies
View Related
Mar 20, 2012
This has been with me for a long time (can't remember how long) must have been about 2 years now. Just decided to try to solve it. When I'm using the computer, everything is fine. My video card is pretty old. When playing some games, sometimes the game crashes (and I get a notification about how my graphics sucks), but no BSOD. I haven't really exhaustively tested, but I think I've used it for 10 hours straight without any problems. The problem comes when I leave it alone (10-30 minutes.. I haven't seen it alive beyond 30 minutes of idle), even if its downloading something or running an antivirus scan. I have been able to run a full scan at startup (before windows loads), which took about an hour, with no problems. I used windows update to install all the latest updates (from windows). I have hibernate disabled and no screensavers, no standby after x minutes/hours. I do sometimes put it to sleep from time to time and there are usually no problems.
View 9 Replies
View Related
Apr 26, 2012
I have a Dell XPS with most stock hardware (added 1 HDD and removed 1 optical drive). I am running Windows 7 Ultimate x64 with and i7 and 12gb of ram. The Windows install is not factory, but it is from a disc I got from dell when I called and complained long enough (and to several different people) that I did want all of the standard junk that is on the factory restore.Most nights my computer apparently BSODs while I am asleep and yesterday was the first time I saw it happen. I am unfamiliar with reading the crash reports after the fact, but I was able to see on the 1 BSOD I saw that it mentioned my ATI Radeon HD5800 graphics card (atisys___ or something of the sort). I then removed the ATI drivers and software complete with Driver Cleaner and reinstalled the newest version. I do no do and have not done overclocking.
View 5 Replies
View Related
Jun 5, 2012
Just had a BSOD while PC was idle,had a few BSOD before but never had a problem with it,it's got way too annoying now though,below are my specs:
OS:Win 7 Ulti x64 OEM
Ram: 8GB DDR3
Proccessor: Intel Core i5 2500k @ 3.30 GHZ
Graphics card:Nvidia Geforce GTX 560 DirectCu
Age:Less than 8 or 9 months
View 5 Replies
View Related
Aug 25, 2010
lve finally after a while caught why my system randomly shoots up 10C in temp while idle.. it relates to svchost, however this leaves allot of questions because as far as lm aware svchost is a process that runs many others under it..
View 2 Replies
View Related
Jan 15, 2013
Just recently I have started having the issue of too much RAM being used on both my desktop and laptop.I am by no means a novice when it comes to computers.The desktop is a custom build and the laptop is a $3600 workstation.Both systems have never given me this problem until I installed Microsoft Office 2013.I can data this problem as soon as I started using this version of office.However, new updates on Windows 7 cannot be ruled out as a possible issue so I am posting on the forums to see if anyone else is having similar issues.
Here are screenshots of task manager. As you can see, there is no program using more than 80MB of RAM. I cannot figure out what is occupying all the space. Could it be clipboard? This usually happens after I am done working on assignments (which require quite a bit of copying and pasting graphs in uncompressed TIFF format created in MATLAB).
Side note: After restarting my desktop,the system usually uses around 1.8GB RAM and laptop uses around the same. This issue is on both laptop and desktop.
Relevant desktop specs: Intel i7 2700k, OCed at 4.5GHz (liquid cooled), Intel 330 180GB SSD, Nvidia GTX570, Western Digital Black 1TB for storage, Corsair Vengeance 8GB RAM working at 1600 MHz.
Relevant laptop specs: Intel i7 920XM, Intel 330 180GB SSD, Nvidia Quadro 880M, Western Digital Black 320GB for storage, Corsair Vengeance 8GB RAM, working at 1333 MHz.
View 4 Replies
View Related
Oct 29, 2009
My Win 7 Acer RAM (3GB) is running at 46% idle? This seems to be alot?
Though it does not increase that much with windows open, even when I open WMP and play music it only goes up to 49-50%.
I use the gadget on screen and double check it with task manager, they are the same.
This is more than the previous Vista Basic machine, which I returned, it ran at 40%?
Is there a way to adjust or sort this?
Oh, this morning it went up 99% and I could not switch it off, I had to hold the button to switch off?
View 9 Replies
View Related
Nov 26, 2009
Two days ago it used only about 600 MB of Ram when idle.
Yesterday it suddenly started using 1 GB idle and it froze a few times.
Why the sudden change? Can you help me decrease the usage?
PS If it helps, the problem started after installing G Data AV (before I used Nod32) and now I installed nod again and the usage is still the same.
I enclosed a picture from Resource Monitor in the attachments.
Explorer.exe is using 70mb. Is that normal?
View 9 Replies
View Related
Feb 17, 2012
I have Gb of ram and recently upgraded from 4gb. When i had 4gb it used 30% of ram when idle. I switched to 8gb and it is using 50% when idle. I used several virus detection softwares to see if that was it. It wasn't. NowIi am also finding programs such as firefox or java using ridiculkous amounts of ram. For example; I was using firefox and was just using google. Next thing I see is a message from windows saying to close firefox casue it using too much ram. I look at the processes to see how much ram and it will be using about 3.5Gb ram...
View 3 Replies
View Related
Jul 25, 2012
On my desktop PC, beside the main HDD with the master-partition I also use a separate HDD which I actually access quite rarely, say once a week. So I want to know if there's any application utility out there which can let me stop the HDD when I don't need it running and restart it when I need it. I want to reduce both the overall power consumption and the wear of the disk.
View 7 Replies
View Related
Jan 8, 2012
When I don't touch my computer for a while, I get CPU 100% (or CPU 50% on this dual core). As soon as I touch the mouse, in one second the culprit escapes. I know it's something under svchost.exe and I know I could see which svchost with Process Explorer or Svchost Viewer. But since the whole process disappears as soon as I touch mouse, it's pretty difficult to pinpoint. Svchost Viewer doesn't list all the processes in one screen, scrolling is needed. So it's basically always hidden and I can't scroll to it as that kills the process.How do I find out what exact process inside svchost.exe is eating my CPU during idle? My goal is to prevent the offending process altogether from starting.By the way, which settings of Windows Defender can cause this CPU 100% on idle problem, I didn't yet try shutting down all the settings there.
View 11 Replies
View Related
Jun 16, 2012
I seemed to have this blue screen error coming up since yesterday morning, i have no idea whats triggering it, but everytime i left the pc to idle, it automatically shut down and a blue screen with many white commands prompted up. my os system is windows 7 home premium 64 bit.
View 11 Replies
View Related
