My hardrive from my old laptop is in an external hard drive because i want to get the pics and info of it onto my new laptop, i have plugged the enclosure in to the lap[top with both USB's but only one red loight is on the external hard drive and it is not in my computer, it bleeps on my laptop when it is plkugged in thoy please help me get my docs bakc
View 3 Repliesi am trying to install windows 7 on old computer, it's AMD sempron with ABIT motherbord NF7. i have 160 SATA 2 hard drive. the installation start but when i need to choose hard drive for source it's says that no hard drive found. what can i do?
View 1 Replies View RelatedI just added a new hard drive to replace the old one that is apparently corrupted. And I'm not sure what I did wrong. I was told to unplug the power supply and the old hd. Add the new one, and power it back up with the Windows 7 installation dvd. Did that and in trying to change the order in witch it boots to cd-rom, it shows sata hd not present? I don't know why, I replaced the cords in the right place. Do I need to configure it, if so how?
View 5 Replies View Relatedwhy when i try to burn my music files to a cd it tells me the file is not located on my hard drive or anywhere else
View 1 Replies View RelatedDuring the reinstallation of Windows 7, the operating system did not find the hdd. on some forum I visit they have to say download the drivers. but I do not know where to find its drivers. [code]
View 1 Replies View RelatedSo yesterday I was online and uploaded a pic to Twitpic. Everything froze up so after a bit I decided to restart. When it restarted it went right into system repair. I let that run ALL NIGHT LONG. In the morning, it asked if I wanted to do a system restore and I said yes. But it said I had no restore points. I knew that wasn't right so I ran through the memory check option and then the hard drive check and was told memory was fine but now I don't have a hard drive found or an operating system. Any clue what has happened or how to restore everything?
View 9 Replies View RelatedI have been doing some searches using the search box that comes up when you press the colorful button on the bottom left. It finds nothing. I can have folders and WORD documents on my desktop, and it always comes up now with nothing found. If I create a test Folder, or WORD document, put on the Desktop, it won't find them. Always used to work fine. Only difference now is that I put in a new HD after the old one failed. Everything else seems to work fine.
View 1 Replies View RelatedI have a LaCie external hard drive which works fine on other pc's running Windows 7 Ultimate, but on this one it is an "unknown device". I have tried it in different ports but with the same result. I've checked with Windows Compatability and the exact model is listed there as being compatible. I've been to the manufacturer's website but there are no drivers available.I have the same problem with any USB device I plug into any port. I have tried a complete Windows re-install from a different CD but it made no difference.The only USB devices that work are the keyboard and mouse.I have given the LaCie HD as an example because I am hoping that if I can get a specific device to work, I may be able to solve the problem with others.
View 5 Replies View RelatedWhen I start my laptop, it shows the HP logo, begins to boot and is almost instantly interrupted by a white screen that scrolls down from the top. It reboots right after the white screen.I am able at the HP logo screen able to navigate to System Restore and that is where I run into my next problem.When the System Restore window opens for confirmation it shows that "Local Disk (C) (System)" status: "Ready to restore" and the check-box next to it is checked.The next line has a empty check-box for "Local Disk (C)" with the status: "The drive cannot be found." I can also successfully boot into Safe Mode with Networking. I can access all my files. Which leads me to believe that it is a hardware problem. Possibly the motherboard or graphics card.
View 7 Replies View RelatedI have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.
View 3 Replies View RelatedI have tried install win7 64 but is says no driver found,/I went to BIOS it does'nt recognize the hard drive there too.
View 1 Replies View RelatedSo, I have a i7 2600K system with a solid state disk as the boot drive, and an older (c2008) Samsung Spinpoint F3 500GB drive as the data drive for programs (that I deem as not worthy of the quick load times). The hard drive has given me some errors over time, and I bought a hard disk to replace it (a Hitachi 1TB). The issue I'm having is that the fact that Windows 7 puts a small (100MB) partition on the F3, and for some reason, even though I'm running Acronis 2012, it doesn't seem to be able to clone the F3 over to the Hitachi. I've also tried Drive XML, and for my 2 hour wait, I only managed to acquire a boot error. Thankfully, I've not done anything rash to destroy the data on the F3, but given the fact that I've seen corrupted files in Steam from that drive, I'm not will to trust it long term with my data. I really need to get the data onto that Hitachi, though... Anyone have any advice for upgrading the HDD in a SSD/HDD system? I don't really feel like it should be so hard, especially if I've bought Acronis True Image, but maybe they haven't designed their product to handle this scenario quite yet?
View 9 Replies View RelatedWhile attempting to perform a startup repair....I get a hard disk could not be found. I have a HP dv6 -3050 US....I'd like to know if this is for sure a hardware issue...before wasting time and money on ordering HP recovery disks..
View 3 Replies View RelatedI reinstalled my hp notebook after getting message boot disk not found (3F0). I am running System Type x64 hp pavilion Dv7 with a AMD Phenom P840 Triple Core Processor.After restoring it from the recovery disk to.. from box condition and reloading all updates and drivers system still gives me the same message. The first time i reinstalled it to factory default and it didn't work. That is why the second time I did the from the box installation. I think I have created more than one operating system now and I don't know how to fix the problem. When it was originally loaded from Staples in January this year it wasn't really running great but I thought it was just my wireless connection was slow. Then it started to take a long time to do anything, on or offline. I went into the updates history from Microsoft and noticed that the first 14 updates they did failed. One of them was for display amd M880G with ati mobility. The computer began lagging worse and worse and starting to become unstable. That was when i decided to run the recovery disk not knowing that it was creating more hard disks. The message is back and now there is more than one hard disk and the last one i did was complete and all updates drivers were successful. I am still getting the boot devise not found message and sometimes it won't start at all.
View 11 Replies View RelatedI recently bought a lop top and have seen the blue s reen 3 times. When downloading AVG anti virus a start up test popped up and said boot drive not found also said Hard disk (3FO) not found please help me fix and down load drivers that I need.
View 5 Replies View RelatedI have a HP Touchsmart IQ500. Turning my computer PC on today, all I got was a blue HP invent screen with setup, boot menu, system recovery, and system diagnosis, and I could not get past it. I entered the BIOS and figured out that the hard drive was listed as "not installed." Pretty sure that is the main problem.I tried a system restore (with the Windows 7 install disc), but I guess the computer couldn't read the hard drive enough to enter safe mode (I tried restarting and F8ing several times). I put in an external hard drive, and the BIOS read it; however, windows does not allow you to partition an OS on a hard drive.
View 2 Replies View RelatedI have an internal hard disk not in use ,and I would like to make it as external disk !I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .So is there another way ? like usb -esata cable
View 3 Replies View RelatedMe and my brother built me a new computer from scratch (he did the building - i did the watching). I purchased an internal hard drive from Overclockers UK. It's a Samsung 1TB drive. I also have a 64 Solid-state drive in there as my primary hard drive that Windows was installed on and a couple of programs are installed on. My storage disk (the 1TB disk) is for all my music/films etc. Whenever I drag and drop a file into the Samsung hard-drive - it copies it rather than moves it instantly.When I had a laptop, I had 3 external hard drives and this is the way it copied files onto them.how I can get the internal drive to stop acting like an external drive?
View 6 Replies View RelatedI have a virus infected sata hard drive with windows 7 on it. It has the win 7 anti virus 2012 on it, and it's a cybercriminal virus. I have lots of files I want to transfer to the new sata drive. I already have windows 7 installed on the new drive. How do I get the files from the bad drive to the new one?
View 4 Replies View RelatedI have a USB Webcam 6.1.7601.17514 from Microsoft installed on a Fujitsu Laptop (Windows 7 ) and I want to copy and install it on another Fujitsu laptop (Windows 7).The other laptop the camera is not working and there is no webcam driver installed.
View 1 Replies View Relatedi've got 2 extra 1TB Seagate drive:[URL]I use these to make backups of my 3 hard drives (1 x SSD, 1 hybrid, and 1 SATA). I brought this new machine back in April, and it was working fine up until then. However, after trying to install some software (which didn't wanna install in the end anyway, due to it being rubbish!), I can now no longer see these drives on my PC The weird part too - is that my Win7 laptop has exactly the same issue ... but my brothers Vista laptop, and Win7 PC see them just fine!To start with I was thinking the drive had gone faulty (as it wasn't working on both my machines), but after testing it on my brothers stuff it prooved they are both working fine The USB's I'm using to connect it to are fine (They work for USB sticks and other USB kit) ... so I'm at a bit of a loss as to what it could be? The even weirder thing - is that my brothers 500gb external drive (can't remember what make that was, but its not Seagate) works just fine!Its driving me up the wall as I can't do my daily backups (I'm a software developer, so having a current backup of my PC incase of a fatal mess up with my system is vital for me)
View 5 Replies View RelatedI have Vista installed on my Hard Drive, 250 GB.
But i recently purchased a 2nd Hard Drive, 500 GB, and i want to install Windows 7 on it.
Is that possible, to have both separately?
I got a server that is running Windows 7. It hold movies music etc... The only way to connect with it is via RDP. But in Windows 7 I am unable to use the CD/DVD drive. I cant burn music or movies. I use Nero atm.
When I used Windows XP it worked just fine.
I check in regedit and there is no upper or lower filter adn my hp still wouldn't read the drive what can i do
View 1 Replies View Relatedmake a dualboot comp by adding windows XP to a new partition. I created the new partition with 20gb. (From the 500 of my actual harddrive)But before I actually installed on that, I got distracted with a second harddrive that my dad got(for no reason). It had a full copy of Windows XP backed up on it from another computer, so I figured I would just use that for the dualboot. I plugged it in (wired the same way as my old harddrive, but different data slot), restarted, checked the harddrive in explorer - all the data was there / reading correctly / etc, and I used 'easyBCD' to add the new harddrive to the boot list.(Which, of course, crashes if I try to start it. I just wanted to see what it would do). For a reason I can't remember, I unplugged the second harddrive for a bit, started the computer on accident (I don't know if anything loaded before I shut it off), and then when I plugged it back in.Windows 7 would not launch. It goes to a DOS-like window, except it's just a flashing _ and it never does anything even after a few minutes. XP didn't work still.. so I decided to reinstall XP (as I couldn't tell which harddrive was which on the list, I unplugged the main harddrive while installing onto the new).. and when I did this.. it formatted and installed fully... then restarted.. then restarted.. and restarted.. and just kept restarting, never showing any thing past the manufacturer logo/BIOS load-button-message-thing. So, I then try to use my 3-disk Windows7Recovery disk(burned myself with a program apparently included by the manufacturer.) It installed fully, appearing to work.. but when I launched it, it said "Invalid Partition Table" and wouldn't boot past that. When I insert my driver installer disk, it gives me a basic DOS window thing. dir A: shows the files in the disk. dir B: for some reason shows the same. C: says "Error reading from drive C: DOS area: general failure". All other letter:'s just say "invalid drive". (I'm doing this with both harddrives in.) I attempted connecting the harddrives to an old computer, but it gave an error for both. (It detected the harddrives, but said it had an error reading from it. Windows Explorer asked me to format it... {i'm willing to format one of the drives if anybody thinks it will help, but the old harddrive has data I'd prefer not to lose.} ) Looking on google, I saw several problems that all have similar problems (less overdescripptive than I am though) but none of the fixes suggested worked for me. Also - as I have two different with different errors, I only need to make one of them work.)Also - my other available computer has a CD burner / floppy drive if either are required. I also have several USB's. The computer can boot from USB's and CD's (tested), and I could easily take the floppy thingy and connect it to the computer.also - this computer is probably still under warranty unless unscrewing the hard drive voids it. .. does that count as modification of the computer?
View 5 Replies View RelatedI have a Plextor 716-A DVD drive in my machine that's running Windows 7 32-bit, ASUS P5Q deluxe MB and 2 x SATA HDD's. The DVD drive is not found by Windows on start-up, it does not appear in My Computer or in Computer Management - basically Windows knows nothing about it.
The DVD drive is found in the BIOS and I can see it's being loaded during boot-up. I can use the drive as a bootable drive. The drive is only discovered by Windows when I enter and then resume from sleep mode or hibernation and works fine.
For some reason my USB floppy drive is not found or recognized in Win 7 64 bit, it was working but not anymore. Can't find it in Computer Management-Disk Management but it is listed in Devices and shows no conflicts.
View 9 Replies View RelatedOkay i found a program called "fveupdate.exe"Its in C:/Windows/File Description: BitLocker Drive Encryption Servicing Utility, What is that?
View 1 Replies View RelatedI'm running Win 7 Home Prem 64, I attached my old C drive to retrieve some files from the USERS folder but it's not showing, I've tried a few things to take ownership of the drive etc but it's still not there.
View 9 Replies View RelatedI have a custom built HTPC with a Seagate SATA drive. Media Center halted, and Win7 would not reboot. When I attempt to reinstall Win7 it cannot find the drive (C) - "No drive were found. Click Load Driver to provide a mass storage driver for installation."
My research tells me SATA drives don't have drivers. I've changed BIOS SATA drivers from "Enhanced" to "Compatible" with no effect.
Don't know what to try next.
So im trying to install Windows 7 on my computer. Im curently running off of XP. When i try to install Windows 7 it says it cannot find any drive to upload to. When i click on my hard drive it doesnt recognize it.
View 1 Replies View Related