I've moved again recently and this time my laptop running 7 professional isn't connecting to the HP J6410 printer. The printer is connected to the wireless network and prints a test page from the printer set up and the info when i print the network config page is correct. The printer is set as default and I have re-installed the drivers and gone through the whole HP problem-solving thing.
View 1 RepliesMy Partner is a professor at a major university and conducts a consulting business from home. We have 2 old desktops and a new HP Pavilion notebook on our home wireless network. The new notebook was set up by a University tech person 12/10 and was functioning properly. All the computers are linked to our older hp Laser Jet 1300 PCL 6 printer. One day the notebook froze and when rebooted it had lost its connection to the printer. I have done everything I know and followed numerous "geek" instructions to reconnect. So far I have succeeded only in losing my own printer access on my old Dell Dimension 2400 desktop. Prior to that, however, both old desktops were printing, even as the new notebook did not. Connection to the Internet is fine and the signal strength from the new Belkin router is "Excellent".
View 14 Replies View RelatedThe laptop can see the wireless networks (there are two wireless networks since it's a 2.4GHz/5GHz dual band router) and even connect to any of the two networks.It also gets an IP address from the DHCP server and the Internet connection starts working for a very short period (5-10 seconds). Then the connection is lost and though it occasionally returns, the computer is unable to access Internet most of the time. Apparently, it doesn't even get to the gateway. If I ping to the router's IP address there's no response, except for during the first few seconds after establishing the connection:[CODE]This behavior is absolutely consistent and can be observed each time one connects to the Linksys router from this laptop. Nothing I have tr includes: rebooting the laptop, rebooting the router, disabling one of the two wireless networks on the router, trying out various encryption settings (open, wep, wpa2), changing channels, disabling/enabling b/g/n modes, disabling firewall on the laptop, disabling ESET antivirus, reinstalling the wireless adapter driver, ... I could go on. I've been struggling with this for three nights and I'm getting desperate.
There are three other laptops (one Mac, two Windows PCs) connecting to the router without any problems. Strangely enough, the laptop only has this problem with the new Linksys router. It can connect to Internet via our old Airport Express wifi router without any problems. It can also connect to Internet via the Linksys router with an ethernet cable.One thing I have discovered is that rebooting the laptop in a safe mode with network enabled FIXES THE PROBLEM! However, when I boot back to the normal mode (even when disabling all startup items and all services, except for those needed for networking), the problem is back.
i installed windows 7 and now I lost my sound and wireless connection
View 3 Replies View RelatedDV6700US seems to have lost the wireless network connection. A sudden failure to print gave me a printer offline message. My iMac printed fine, then I realized my iMac could not see the laptop and the laptop could not see the iMac nor printer, but still has internet connection on the laptop. I now nothing about Windows 7.
View 2 Replies View RelatedAll of a sudden my Windows 7 (64) machine lost internet connectivity. Nothing new was installed; no changes were made. It just lost connection. My Vista machine still connects fine. I'm scratching my head over this one. I reset the router and tried Windows troubleshooting services to no avail.
View 1 Replies View RelatedWe changed our provider today and are back with satellite instead of broadband. I have wireless for the computers but now I've lost my wireless printer. It's a Canon MP 560. I tried setting up the connection from the computer and from the printer.
View 2 Replies View RelatedI have an HP desktop running Windows XP Pro and I network to an HP notebook through a wireless router.I recently purchased a Gateway Laptop with windows 7 Home Premium. It found my wireless router immediately and I was able to get on the net. It also found my HP desktop so I could share files.The problem I am having is with my network printer. It is an older epson stylus photo r320. Epson says that windows 7 has a driver for this printer and if I plug the printer directly into the laptop using the usb connection wiindows 7 finds the printer no problem. If I try and have windows 7 locate the printer on the network it can't find it.
View 2 Replies View Relatedhow can I setup connection with my wireless printer?
View 1 Replies View RelatedI had a Dell MFP1600n laser printer given to me a while back (Praise the Lord) & it came at the right time as I was destitute then & couldn't afford cartridges for a Canon I960.Here's the rub.There was no problem connecting & using the printer with a wired connection to a Linksys WRT54GS & a wired XP Desktop & a wireless XP Desktop (both older 86X systems).Though the 64 bit, wireless, Windows 7 laptop connected through the same router to the internet. As usual, it would not & still does not "see the XP machines". It also would not, through multiple configurations, connect to this printer.At first I tried to update the driver, but Dell only had XP 32 bit available. After hours & days of wasted time with "Add printer", I resorted to using a flash drive for the few times I needed to print something from this infernal Windows 7 machine.
I finally wondered if my head was stuck in the "soon to be obsolete, XP mode".'know, this isn't the first time Microsoft has Pi**ed me off & I understand that we are all "beta testing" a product that we have paid several hundred dollars for. I also understand the reason for security, but I don't want to spend 50% or better of my time trying to use an OS that cannot tell ME from a scumbag intruder. There are AV programs for that...As it came installed on my laptop (& of course I received no restore or install disks whatsoever with it), I'm stuck with trying to repair, rather than reformat. Unless I wish to pi** away a bunch more money to Microsoft.
I have a canon printer (couple years old) and a Brothers printers connected to a computer with Vista 32bit. I just purchased a laptop that has windows 7 64bit. I can connect via wireless network to my Vista computer just fine. I was able to connect to and install the brother printer but when I try to install the canon printer I get a message something like this "Cant find INI file, will look in windows update" after a while it comes back and says It can find INI file. Probably it is because my Vista is 32 bit and my laptop Windows 7 64bit. But I did not have this problem with my brother printer. How do I install the canon printer?
View 7 Replies View RelatedInternet connection over an electrical Powerline instead of a wireless connection?is it easy to setup, reliable, fast,..?More in particular a D-Link device:DHP-307AV PowerLine Homeplug AV Kit
View 6 Replies View Related, I lose the internet connection but the network diagnostic says everything appears to be set up properly. new windows 7 home premium.
View 6 Replies View RelatedSo i was browsing the internet casually, and all of a sudden my internet connection is lost ....OK, so i checked the modem connection, and all the available connections on my computer, and nothing, just error 651, I looked around and found its a bug, and someone said change the raspppoe.sys file to raspppoe_orig.sys and it will fix it, so i did, but still nothing. Please help, is there anyway around this?
View 2 Replies View RelatedMy problem is that I my HTPC drops the HDMI connection when I exit media center.
When I am in 7MC I can play all my ripped DVDs, Blu-rays, and music. But when Media Center closes (or in window mode) the HDMI connection drops off. I can see the "No Signal" messeage in the Onkyo display as soon as 7MC closes, and it reconnects again when 7MC opens. I need the connection to say active so I can have sound with NetFlix (apparently it runs outside of media Center even though I launch it in 7MC).
why my HDMI connection is dependant on 7MC running?
Windows 7 x64
ASROCK H67M-ITX/i3-2100T connected via HDMI to Onkyo TX-SR705 receiver
Because everytime i restart or open my hp laptop the wifi connection always failed. But after i restart my router and run the troubleshoot option of my laptop it will go back to normal.. Do i need to install something? My os is windows 7 starter edition and it is fully updated.
View 3 Replies View RelatedMy computer worked fine for 3 months, but then lost the ability to connect to the internet with either exploer or google chrome. A more computer literate cowork got my internet working on explorer 64 bit so I can check email, but I can not download updates or update my virus scanner.
View 1 Replies View RelatedI have an interesting problem happens to my new build recently. It's getting more frequent since last week, and I'm not sure whether this is coming from my 5 years old modem or my PC.whenever I completely close my web browser,my rig will drop internet connection to "no internet access".Then I have to restart my modem by unplugging them and restart my PC.It will not work only by restarting my PC or modem along. I have to restart both to back on internet.I have also ran through "my own" trouble shooting thing, and I only restart modem/PC along, the system always give "identifying network dot dot dot,no network access".
Motherboard: Gigabyte P67A-UD4-B3
P.S. AT&T internet was outage in my area for about half day last week. Even then, the problem started couple days before the outage.I have also switched to my new Ethernet cable in case of cable issues.
My friend plugged his i pad into my laptop and my secure Internet connection became nu-secure why?
View 2 Replies View Relatedmy local aria connection had lost i need lan driver for windows 7my laptop is lenovo 3000 n200 i didnt find any file
View 1 Replies View RelatedI have install server application on one machine(64 bit win 7). it is basically for licensing purpose on local area network. In windows firewall setting i created inbound rule for listening connection request i.e UDP port 5000 and outbound rule for broadcasting purpose.scenario:-I am using 64 bit windows 7 professional and windows firewall is on. when client application try to connect to server, it connect successfully but after 30-40 second connection to server lost and it lunch connection error and asking for reconnect.If i turn off firewall, every things are going as per my expectation.Note:- above scenario is working fine on window XP.
View 3 Replies View RelatedI have two PCs cabled directly to a Netgear WNDR4500 router. This morning, my Windows 7 PC had no network connection when I turned it on. These computers don't get moved, I wasn't messing with the cables beforehand. Everything was fine yesterday.The Troubleshooter suggested I had a broken cable. I tried another cable, but it still would not work. I connected the Windows 7 machine to the same router connection my XP machine uses, but it still did not work.Device Manager reports the Network Adapter is working properly. The system tray network icon reports "Not connected/No connections are available." The Troubleshooter reports, "A network cable is not properly plugged in or may be broken." I tried disabling/enabling the Local Area Connection, but it still reports "Network cable unplugged." My gut feeling is that the Ethernet jack on the motherboard is physically broken. But it blows my mind that it would break for no reason.Could an automatic update of some sort disabled networking in a way that it only appears the cable is bad? Could the physical connection at the back of the machine spontaneously break? I suppose I could go buy a network card, which would be cheaper than replacing the motherboard. I'm gonna get cleaned up and head to the store now.
View 7 Replies View RelatedI had my HTPC up and running last night, watched a movie, turned it off and went to bed. When I woke up this morning I found that I couldn't get any sound while playing videos through my web browsers, thinking it might be a video card issue I first checked some of my movies, but they also wouldn't play with sound so I deleted my nvidia files and reinstalled them. No luck, on one restart I lost my internet connection with my router. If I look inside the Buffalo's settings, I can see my HTPC's IP address (after running ipconfig /all on the htpc) I did a system restore but that didn't work. I even went so far as to do a clean install of Windows on the HTPC, but that also didn't work. I keep getting the yellow triangle and the message "unknown network" The HTPC tells me to check my router, which I have restarted a number of times unplugging the cable modem and the Buffalo. Turn on the cable modem get it online, then plug in the Buffalo, but nothing works. I have tried switching ethernet cables, ports, but no luck.
View 3 Replies View RelatedI lost my wireless internet connection. I have windows 7. My basic view of network info reads. "unidentified network" My connection is strong but my "access type" reads No internet access.
View 1 Replies View RelatedMy desktop has recently been upgraded to Windows 7 Ultimate from XP. I set up a home group at another location, then returned the desktop to my normal connection. The wireless card I used was a D-Link that is XP compatible only, and I found this out after attempting to install, then I checked on it later. I deleted the driver, and tried a Netgear WT111G USB wireless card. Install failed, and I went online to look for a compatible driver.
I downloaded a driver, installed it, and the wireless card was detected, but could not connect to the internet. Uninstalled the driver, and tried plugging into Ethernet, and cannot find my home connection. Can only get into network settings (home,work,public).
Has any one here heard about this problem after creating a homegroup? Trying to troubleshoot, but it's a specific problem I'm not familiar with as of yet.
The faulty drivers are no longer on the PC, but it's still unable to find a direct wired connection.
I had my HTPC up and running last night, watched a movie, turned it off and went to bed. When I woke up this morning I found that I couldn't get any sound while playing videos through my web browsers, thinking it might be a video card issue I first checked some of my movies, but they also wouldn't play with sound so I deleted my nvidia files and reinstalled them. No luck, on one restart I lost my internet connection with my router. If I look inside the Buffalo's settings, I can see my HTPC's IP address (after running ipconfig /all on the htpc) I did a system restore but that didn't work. I even went so far as to do a clean install of Windows on the HTPC, but that also didn't work. I keep getting the yellow triangle and the message "unknown network" The HTPC tells me to check my router, which I have restarted a number of times unplugging the cable modem and the Buffalo. Turn on the cable modem get it online, then plug in the Buffalo, but nothing works. I have tried switching ethernet cables, ports, but no luck.
View 8 Replies View RelatedSo my son was in the middle of one of his blood bowl league games this evening and a popup asked him if he wanted to install a Windows 7 update. He's only 12 and inexperienced enough that he didn't just tell the system to wait a few hours until he could finish his game, so he told it to go ahead and instal. The result was his near-instant loss of internet (as well as his game, as he was timed out and his opponent got the win).
Even more serious, after the update was finished and his computer was restarted, he still cannot get an internet connection. I've tried rebooting, complete shutdown and then reboot, and asking the computer's internet tools to diagnose/fix the problem, all to no avail.
I read about running a system restore (restoring to an earlier version of windows), but when I tried I learned that that aspect of his system had been shut off.
I know there must be SOME way to fix this problem, but I can't think of what it might be. Even if the problem is due to the new Windows version, he has no way to download a fix for it because he has no internet connection.
The NVIDIA OpenGL driver lost connection with the display driver due to exceeding the Windows Time-Out limit and is unable to continueError code: 7I keep crashing, is thereI tried the W7 fix, that did not work. I installed older drivers, after installing the newest ones[CODE]
View 4 Replies View RelatedI bought a new wireless Epson Workforce 545 printer. It has worked without flow for quite some time (nearly a year). Now all the suddenly it wont print.I have it as a shared printer. There are three other family members on the network and all three others print without any problem. Mine worked fine and now wont print. It goes through the motions and then times out. All it says is "printer error".
View 8 Replies View RelatedI had problems with my computer not connecting to the network sometimes after restarting my computer. That was usually fixed by simply unplugging and replugging into my outlet. I have a hard wire connection and my ethernet cable gets plugged into the wall and connects to the modem/router (whichever it is) from there. After I reset my computer this morning though, my computer has absolutely refused to connect to the network. I've tried resetting the router/modem and unplugging and replugging in my Ethernet cable. I noticed however in the network center it showed me connected to Network 8 (my standard home connection) for a few seconds but then it changes to unidentified public network and breaks connection to the Internet. Wireless is working fine and I'm infact typing all this on my iPhone 4.
View 1 Replies View RelatedMachine: Dell XPS17 laptop (702x)Windows 7 home premiumWifi adaptor: Intel Wifi Link 1000 BGNRouter: Belkin F5D7634-4 802.11GReconnection takes 3 or more minutes to establish after sleep. Tried all the on-line advice e.g setting power scheme to max power; unticking box in adaptor settings 'Allow computer to turn off this device'.Tried to update drivers for wifi adaptor but the update process says I have the latest drivers. However Dell's driver site analysed my laptop and says there is a later driver for download. Tried installing this but was stopped by message saying it wasn't authenticated/certified so terminated.
View 1 Replies View Related