Because everytime i restart or open my hp laptop the wifi connection always failed. But after i restart my router and run the troubleshoot option of my laptop it will go back to normal.. Do i need to install something? My os is windows 7 starter edition and it is fully updated.
View 3 RepliesI lost my wireless internet connection. I have windows 7. My basic view of network info reads. "unidentified network" My connection is strong but my "access type" reads No internet access.
View 1 Replies View RelatedI did set up a connection between my Win 7 x64 laptop & vista x64 desktop where I could access my desktop files from the laptop but no access to laptop from the desktop & I was ok with that. Suddenly a few days back, I lost the connection from the laptop & I don't have any clue to that. I've changed the network types between home & public but it didn't work. What should I do to restore the connection.
View 1 Replies View RelatedThe issue came when I was talking on skype, the connection was lost and the whole pc became very slow and unresponsive, I thought that the problem was on skype so I uninstalled it, but the issue appeared again when I opened 3D games. I made everything possible to solve the issue but nothing happened. I also checked that my rams were installed correctly, the pc says that I have 4GB of rams and the available physical memory is 2GB of rams.
View 17 Replies View Related, I lose the internet connection but the network diagnostic says everything appears to be set up properly. new windows 7 home premium.
View 6 Replies View RelatedMy Partner is a professor at a major university and conducts a consulting business from home. We have 2 old desktops and a new HP Pavilion notebook on our home wireless network. The new notebook was set up by a University tech person 12/10 and was functioning properly. All the computers are linked to our older hp Laser Jet 1300 PCL 6 printer. One day the notebook froze and when rebooted it had lost its connection to the printer. I have done everything I know and followed numerous "geek" instructions to reconnect. So far I have succeeded only in losing my own printer access on my old Dell Dimension 2400 desktop. Prior to that, however, both old desktops were printing, even as the new notebook did not. Connection to the Internet is fine and the signal strength from the new Belkin router is "Excellent".
View 14 Replies View RelatedSo i was browsing the internet casually, and all of a sudden my internet connection is lost ....OK, so i checked the modem connection, and all the available connections on my computer, and nothing, just error 651, I looked around and found its a bug, and someone said change the raspppoe.sys file to raspppoe_orig.sys and it will fix it, so i did, but still nothing. Please help, is there anyway around this?
View 2 Replies View RelatedMy problem is that I my HTPC drops the HDMI connection when I exit media center.
When I am in 7MC I can play all my ripped DVDs, Blu-rays, and music. But when Media Center closes (or in window mode) the HDMI connection drops off. I can see the "No Signal" messeage in the Onkyo display as soon as 7MC closes, and it reconnects again when 7MC opens. I need the connection to say active so I can have sound with NetFlix (apparently it runs outside of media Center even though I launch it in 7MC).
why my HDMI connection is dependant on 7MC running?
Windows 7 x64
ASROCK H67M-ITX/i3-2100T connected via HDMI to Onkyo TX-SR705 receiver
My computer worked fine for 3 months, but then lost the ability to connect to the internet with either exploer or google chrome. A more computer literate cowork got my internet working on explorer 64 bit so I can check email, but I can not download updates or update my virus scanner.
View 1 Replies View RelatedI have an interesting problem happens to my new build recently. It's getting more frequent since last week, and I'm not sure whether this is coming from my 5 years old modem or my PC.whenever I completely close my web browser,my rig will drop internet connection to "no internet access".Then I have to restart my modem by unplugging them and restart my PC.It will not work only by restarting my PC or modem along. I have to restart both to back on internet.I have also ran through "my own" trouble shooting thing, and I only restart modem/PC along, the system always give "identifying network dot dot dot,no network access".
Motherboard: Gigabyte P67A-UD4-B3
P.S. AT&T internet was outage in my area for about half day last week. Even then, the problem started couple days before the outage.I have also switched to my new Ethernet cable in case of cable issues.
My friend plugged his i pad into my laptop and my secure Internet connection became nu-secure why?
View 2 Replies View Relatedmy local aria connection had lost i need lan driver for windows 7my laptop is lenovo 3000 n200 i didnt find any file
View 1 Replies View RelatedI have install server application on one machine(64 bit win 7). it is basically for licensing purpose on local area network. In windows firewall setting i created inbound rule for listening connection request i.e UDP port 5000 and outbound rule for broadcasting purpose.scenario:-I am using 64 bit windows 7 professional and windows firewall is on. when client application try to connect to server, it connect successfully but after 30-40 second connection to server lost and it lunch connection error and asking for reconnect.If i turn off firewall, every things are going as per my expectation.Note:- above scenario is working fine on window XP.
View 3 Replies View RelatedI have two PCs cabled directly to a Netgear WNDR4500 router. This morning, my Windows 7 PC had no network connection when I turned it on. These computers don't get moved, I wasn't messing with the cables beforehand. Everything was fine yesterday.The Troubleshooter suggested I had a broken cable. I tried another cable, but it still would not work. I connected the Windows 7 machine to the same router connection my XP machine uses, but it still did not work.Device Manager reports the Network Adapter is working properly. The system tray network icon reports "Not connected/No connections are available." The Troubleshooter reports, "A network cable is not properly plugged in or may be broken." I tried disabling/enabling the Local Area Connection, but it still reports "Network cable unplugged." My gut feeling is that the Ethernet jack on the motherboard is physically broken. But it blows my mind that it would break for no reason.Could an automatic update of some sort disabled networking in a way that it only appears the cable is bad? Could the physical connection at the back of the machine spontaneously break? I suppose I could go buy a network card, which would be cheaper than replacing the motherboard. I'm gonna get cleaned up and head to the store now.
View 7 Replies View RelatedI've moved again recently and this time my laptop running 7 professional isn't connecting to the HP J6410 printer. The printer is connected to the wireless network and prints a test page from the printer set up and the info when i print the network config page is correct. The printer is set as default and I have re-installed the drivers and gone through the whole HP problem-solving thing.
View 1 Replies View RelatedI had my HTPC up and running last night, watched a movie, turned it off and went to bed. When I woke up this morning I found that I couldn't get any sound while playing videos through my web browsers, thinking it might be a video card issue I first checked some of my movies, but they also wouldn't play with sound so I deleted my nvidia files and reinstalled them. No luck, on one restart I lost my internet connection with my router. If I look inside the Buffalo's settings, I can see my HTPC's IP address (after running ipconfig /all on the htpc) I did a system restore but that didn't work. I even went so far as to do a clean install of Windows on the HTPC, but that also didn't work. I keep getting the yellow triangle and the message "unknown network" The HTPC tells me to check my router, which I have restarted a number of times unplugging the cable modem and the Buffalo. Turn on the cable modem get it online, then plug in the Buffalo, but nothing works. I have tried switching ethernet cables, ports, but no luck.
View 3 Replies View RelatedThe laptop can see the wireless networks (there are two wireless networks since it's a 2.4GHz/5GHz dual band router) and even connect to any of the two networks.It also gets an IP address from the DHCP server and the Internet connection starts working for a very short period (5-10 seconds). Then the connection is lost and though it occasionally returns, the computer is unable to access Internet most of the time. Apparently, it doesn't even get to the gateway. If I ping to the router's IP address there's no response, except for during the first few seconds after establishing the connection:[CODE]This behavior is absolutely consistent and can be observed each time one connects to the Linksys router from this laptop. Nothing I have tr includes: rebooting the laptop, rebooting the router, disabling one of the two wireless networks on the router, trying out various encryption settings (open, wep, wpa2), changing channels, disabling/enabling b/g/n modes, disabling firewall on the laptop, disabling ESET antivirus, reinstalling the wireless adapter driver, ... I could go on. I've been struggling with this for three nights and I'm getting desperate.
There are three other laptops (one Mac, two Windows PCs) connecting to the router without any problems. Strangely enough, the laptop only has this problem with the new Linksys router. It can connect to Internet via our old Airport Express wifi router without any problems. It can also connect to Internet via the Linksys router with an ethernet cable.One thing I have discovered is that rebooting the laptop in a safe mode with network enabled FIXES THE PROBLEM! However, when I boot back to the normal mode (even when disabling all startup items and all services, except for those needed for networking), the problem is back.
DV6700US seems to have lost the wireless network connection. A sudden failure to print gave me a printer offline message. My iMac printed fine, then I realized my iMac could not see the laptop and the laptop could not see the iMac nor printer, but still has internet connection on the laptop. I now nothing about Windows 7.
View 2 Replies View RelatedMy desktop has recently been upgraded to Windows 7 Ultimate from XP. I set up a home group at another location, then returned the desktop to my normal connection. The wireless card I used was a D-Link that is XP compatible only, and I found this out after attempting to install, then I checked on it later. I deleted the driver, and tried a Netgear WT111G USB wireless card. Install failed, and I went online to look for a compatible driver.
I downloaded a driver, installed it, and the wireless card was detected, but could not connect to the internet. Uninstalled the driver, and tried plugging into Ethernet, and cannot find my home connection. Can only get into network settings (home,work,public).
Has any one here heard about this problem after creating a homegroup? Trying to troubleshoot, but it's a specific problem I'm not familiar with as of yet.
The faulty drivers are no longer on the PC, but it's still unable to find a direct wired connection.
I had my HTPC up and running last night, watched a movie, turned it off and went to bed. When I woke up this morning I found that I couldn't get any sound while playing videos through my web browsers, thinking it might be a video card issue I first checked some of my movies, but they also wouldn't play with sound so I deleted my nvidia files and reinstalled them. No luck, on one restart I lost my internet connection with my router. If I look inside the Buffalo's settings, I can see my HTPC's IP address (after running ipconfig /all on the htpc) I did a system restore but that didn't work. I even went so far as to do a clean install of Windows on the HTPC, but that also didn't work. I keep getting the yellow triangle and the message "unknown network" The HTPC tells me to check my router, which I have restarted a number of times unplugging the cable modem and the Buffalo. Turn on the cable modem get it online, then plug in the Buffalo, but nothing works. I have tried switching ethernet cables, ports, but no luck.
View 8 Replies View RelatedSo my son was in the middle of one of his blood bowl league games this evening and a popup asked him if he wanted to install a Windows 7 update. He's only 12 and inexperienced enough that he didn't just tell the system to wait a few hours until he could finish his game, so he told it to go ahead and instal. The result was his near-instant loss of internet (as well as his game, as he was timed out and his opponent got the win).
Even more serious, after the update was finished and his computer was restarted, he still cannot get an internet connection. I've tried rebooting, complete shutdown and then reboot, and asking the computer's internet tools to diagnose/fix the problem, all to no avail.
I read about running a system restore (restoring to an earlier version of windows), but when I tried I learned that that aspect of his system had been shut off.
I know there must be SOME way to fix this problem, but I can't think of what it might be. Even if the problem is due to the new Windows version, he has no way to download a fix for it because he has no internet connection.
i installed windows 7 and now I lost my sound and wireless connection
View 3 Replies View RelatedThe NVIDIA OpenGL driver lost connection with the display driver due to exceeding the Windows Time-Out limit and is unable to continueError code: 7I keep crashing, is thereI tried the W7 fix, that did not work. I installed older drivers, after installing the newest ones[CODE]
View 4 Replies View RelatedI had problems with my computer not connecting to the network sometimes after restarting my computer. That was usually fixed by simply unplugging and replugging into my outlet. I have a hard wire connection and my ethernet cable gets plugged into the wall and connects to the modem/router (whichever it is) from there. After I reset my computer this morning though, my computer has absolutely refused to connect to the network. I've tried resetting the router/modem and unplugging and replugging in my Ethernet cable. I noticed however in the network center it showed me connected to Network 8 (my standard home connection) for a few seconds but then it changes to unidentified public network and breaks connection to the Internet. Wireless is working fine and I'm infact typing all this on my iPhone 4.
View 1 Replies View RelatedAll of a sudden my Windows 7 (64) machine lost internet connectivity. Nothing new was installed; no changes were made. It just lost connection. My Vista machine still connects fine. I'm scratching my head over this one. I reset the router and tried Windows troubleshooting services to no avail.
View 1 Replies View RelatedMachine: Dell XPS17 laptop (702x)Windows 7 home premiumWifi adaptor: Intel Wifi Link 1000 BGNRouter: Belkin F5D7634-4 802.11GReconnection takes 3 or more minutes to establish after sleep. Tried all the on-line advice e.g setting power scheme to max power; unticking box in adaptor settings 'Allow computer to turn off this device'.Tried to update drivers for wifi adaptor but the update process says I have the latest drivers. However Dell's driver site analysed my laptop and says there is a later driver for download. Tried installing this but was stopped by message saying it wasn't authenticated/certified so terminated.
View 1 Replies View RelatedEvery once in a while, my laptop loses connectivity and cannot be reconnected to the wireless signal unless I turn the computer off and restart.
View 9 Replies View Relatedmy 2007 acer aspire was taking a long time to open aurora i did a system restore with uniblue powersuite what i ended up with was no internet at all but internet sais its connected network sharing center indicates everything is running fine but my internet speed is 0 no internet connection local repair depot recommended a new windows install it could be a virus can i try a new driver can i download a driver on to a usb drive does anyone know a link treid but i found exe only need a driver in an envelope that i can store on usb need a download link would this be called a internet driver?
View 1 Replies View RelatedEverytime windows does automatic updates and laptop finishes rebooting I can Not access internet.
View 2 Replies View Relatedmy hp laptop keeps restarting over and over. I see my window 7 blue screen but another window show up scanning and it say restore system. I don't know what to do. I have done everything that it keeps asking to do and nothing happens.
View 4 Replies View RelatedI have a hp compaq laptop and am able to use the wireless internet connection..however I also have a Dell Inspiron notebook, a few days ago I lost internet connection on the dell but the HP was still connected. I have contacted my internet provider and they say there are no connection problems and all is fine. They think the problem is on the dell unit. I have tried disabling and enabling the Lan and wireless network connection. The system recognizes the wireless router but wont connect to it why and what can I do.
View 7 Replies View Related