Get The Fully Qualified Path To Attached And Network Printers?
Jul 30, 2010How can I get the fully qualified path to attached and network printers? Needed for directing output from a non-standard programming language.
View 1 Replies
ADVERTISEMENT
Prevent Removing Attached VHD, From Safely Removed Attached Media?
Feb 16, 2012prevent users from removing a attached VHD from "Safely remove hardware and eject media", We have had multiple users eject the VHD when they are going to unplug their USB and they are ejecting the attached VHD instead.
View 1 Replies View RelatedNetwork Attached Storage Unit Recommendations?
Jul 20, 2012I have only about 100GB left on my mirrored RAID on my desktop and I am looking for a NAS. I have been looking at this Synology one and this Buffalo one. I like the Buffalo one because it comes with 12TB and depending on the drives may be cheaper.
View 4 Replies View RelatedMicrosoft Backup To An Attached NAS Drive On Network?
Nov 21, 2011I wanted to back up my data files using the supplied backup utility in Win 7 64bit. I run the program and under Backup Destination all I see is my DVD Drive and no way to change to another destination. So under Devices with Removable Storage(1) I see the drive. In my Network locations I created a Share called Backup which I created
View 6 Replies View RelatedFile Sharing Across A Home Network - The Network Path Was Not Found"
Aug 9, 2011I'm having difficulty trying to get my new Windows 7 pc set up to share files across my existing home (wired) network which consists of 1 desktop pc running WinXP and 1 laptop running WinXP.I want the 'C' drive on each of the 3 computers to be shared. I've had the 2 Windows XP computers set up and working like this for several years without a problem but I can't seem to get the 'C' drive on the Windows 7 computer to do the same.All 3 computers have the same workgroup name and none of them require passwords to log on to Windows. There are no problems with the firewalls on any of the machines.On the Windows 7 PC when I right click on the 'C' drive and select the 'Sharing' tab, I have set this up to be shared and when I click on the 'Advanced Sharing' button there is a tick in the 'Share this folder' box, the 'Share name' is 'C'. If I then click on the 'Permissions' button, this shows a 'Group or user name' 'Everyone' and this group has Full Control, Change and Read boxes ticked. As far as I can see there is nothing more I can do.
However from my Windows XP computer, when I go to My Network Places and double click on the icon for the Windows 7 'C' drive, I get the message "\Computername is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.The network path was not found"I've subsequently set up a sub folder (of the Windows 7 'C' drive) for sharing by right clicking on the folder, choosing 'Share with' and then selecting 'Specific people'. I then set up a group called 'Everyone' with read/write permissions. Now I can navigate to this folder from my 2 WinXP computers.
Can't Change Quota Settings On Attached Network Drive
Feb 12, 2012I am using a Windows 7, 64bit machine with an attached network drive I use for streaming my media. The manufacturer is Seagate (2TB) STAM2000. So, I have two folders in this drive:
TV Shows
Movies
combined there is just 500gb. So, the Seagate NAS tells me the drive is full. I right click on the drive and chose properties. I then chose Quota Settings. Here it says: To change these settings click Quota settings. I do this anf nothing happens. It looks as if this option is to prevent one user from filling the drive. I also connected a WD NAS and the same option appears.
Network Path Not Found?
Jul 5, 2012First i have homegroup with my brother when i try to open shared files it said "error network path not found"
second when i turn network discovery on and save changes it return to off automatically.what should i do ??i have windows 7 32 bit and eset smart security 5
Unable To See Network Printers In List?
Feb 7, 2011I am using a Windows 2008 R2 domain controller and File Server. Whenever I add a network printer I always make sure the "List in the Directory" (meaning Active Directory) is checked under the sharing tab in the properties of each printer. On Windows XP machines I can go through the add printer wizard and it finds all printers in the domain.On windows 7 professional clients when I got to Add Printer then select "Add a Network, Wireless, or Bluetooth printer" it does not find any network printers from my file server. I have the file and print sharing enabled on the Windows 7 clients and the File Server.
View 2 Replies View RelatedHow Network Printers Work In Windows
Jun 1, 2012how network printers work in Windows?Is there only one way of setting these up, or several ways? Do I have to have a driver for the specific printer on the client? Why can't the material be sent to the server in some device independent format (Postscript??), and converted to printer commands on the server? Do I have to have a driver for the specific printer on the server? If the driver is on the client, presumably it's talking directly to the printer (using the server only as a means of communication) using the printer's own command codes, so I don't see why the server needs a driver... Under what circumstances can or can't the client download the driver from the server? What happens if the client and server are running different versions of Windows, either an older version on the client, or an older version on the server? What happens if the client is running 64-bit and the server 32-bit, or vice versa? What happens if there is no driver available for the newer version of Windows (which might be the client, or the server), because the printer is quite old?
View 3 Replies View RelatedWindows 7 Wont Log In ( Network Path Not Found)?
Dec 13, 2012i installed a fresh copy of windows 7 onto my laptop and everything checks out i create a username and name the computer etc but then when it gets time to sign into my account it pops up with network path not found and doesnt let me sign in prompts me for a password when i dont have one too, allows me to click over and select different user and password but i have no other accounts on there, tried to reinstall it after formating the HD again but still no luck
View 4 Replies View RelatedSpooler Crash 0x0000002 Error On Network Printers?
Jun 18, 2010Problem:We have around 15 printers on site all running off the network, static IP's the usual setup. For some reason since we have upgraded the computers to Windows 7 64 bit the printers have been acting up.We have an intermittant problem where some users get an error 'unable to print with the current print setup' or when trying to install a printer they can get 'Windows cannot connect to the printer. Operation could not be completed' (0x0000002). To quickly resolve the problem we need to stop and start the spooler service, once this is done everything works fine but it repeats itself again.Solutions Tried:We have checked the drivers on the server changing them to universal drivers, changed drivers on the machines, rebuilt machines, added admin privlidges etc all which do not seem to have any effect. I have tried hotfixes from MS (KB981070-v2 & KB982728) with no result, searched the web but am unable to find a solution, our setup is Server 2003 and computers all run windows 7 64 bit.
View 1 Replies View RelatedError 'code: 0x80070035 The Network Path Was Not Found
Nov 26, 2009I keep getting Error code: 0x80070035 The network path was not found error whenever I try to connect to any other computer (running windows 7 ultimate) on my network. I have another computer with windows 7 ultimate that does not have this problem. Firewalls are disabled on all computers.
Computers all ping fine. Can ping by name too. If I try to connect via IP address, I get Error Code: Error0x80004005 Unspecified error
WebDAV / Add A Network Location / Path Not Valid Error
Jul 12, 2012I can connect to my WebDAV folder on my online server by BitKinex for example, but when I want to add a Network Location to the explorer it fails with the error message that the path is not valid ... but it is valid though.
View 4 Replies View RelatedNetwork Path Not Found - Error Code 0x80070035
Jan 20, 2009Ok, I have a laptop and a desktop. Desktop is currently running 7 x64 and laptop is running 7 x86.
Few weeks ago I was able to access my LAPTOP from my DESKTOP normally by using the Network in the explorer. I was prompted to key in my Username and Password of my LAPTOP and I gained access after.
Now, I have no idea what happened to my DESKTOP. I am able to access other computers but not my LAPTOP. It keeps stating Network path not found with error code 0x80070035. Troubleshooting indicates no problems found.
I do dual-boot with Vista x64 on my DESKTOP and I am able to gain access to my LAPTOP using Vista.
One of the workaround I got for Windows 7 is to create HomeGroup and use my LAPTOP to join it and I can gain access to Network after that.
So, is this a HomeGroup bug and any fix for it?
EDIT: Never mind, I just re-create my password on my laptop and it's fine now. So, it's really weird.
Win 7 Not Showing "network" Attached Drives In Explorer
Feb 5, 2009Let me explain. These are usb drives connected on a network usb hub. No issues with hub, software, sharing on the hub over network. The only small issue is that for example,clicking on my computer to show drives(which it works and shows them this way in preview task pane window), but on the left pane window where its the "folders" view, under my computer all i show is attached IDE/SATA and local usb attached drives.
This does not concern an issue as a mapped network drive as it is NOT setup as and not needed. Software for the hub controls all of that.
This was not an issue with xp.
[edit] Another issue with this is the right click send-to menu... shows local usb, and just shows 2 out of 4 currently connected usb network drives, all connected via the usb hub either directly plugged in, or plugged into to the network hub via another 4port usb regular hub, which by manufacturer's specs is possible and the device is allowed up to 16 connected devices to the network 4 port usb hub.
[edit #2] The above issue with the 2 of 4 drives seems to be related to NTFS and FAT32 as the 2 shown in the right click send to menu are the NTFS drives, not the FAT32.
[edit #3] Update: The drives that show in the navigation pane (left side) of explorer is the NTFS drives, not the FAT32, same with right click send to menu. Although they show up
Unspecified Error Code 0x80070035 - Network Path Was Not Found
Nov 27, 2009I keep getting Error code: 0x80070035 The network path was not found error whenever I try to connect to any other computer (running windows 7 ultimate) on my network. I have another computer with windows 7 ultimate that does not have this problem. Firewalls are disabled on all computers. Computers all ping fine. Can ping by name too. If I try to connect via IP address, I get Error Code: Error0x80004005 Unspecified error.
View 9 Replies View RelatedInstalled Printers Not Displayed In Devices & Printers?
Jun 29, 2009I have installed the following printers: Epson LX-300+II, HP Laserjet 1010, HP Colour Lasterjet 1515, Canon IP5200.
The printers work and are all displayed from Word, IE, etc, but only one printer shows up in Windows 7 Devices & Printers - usually whichever is selected as default printer. If I remove the displayed printer, it shows me another one. When I first installed, it showed me all the printers, but problems started after I had to remove and reinstall my printers.
"Windows Cannot Access \SERVER.... The Network Path Was Not Found"
Jul 1, 2011I have a 11.04 ubuntu samba share that is serving files to my network (though I don't really think this is relevant). I have 2 Windows 7 64bit machines (1 laptop/1desktop) that can access these files fine, however I have 1 Windows 7 32bit that is unable to access the files. (I even think it may have been able to before.)When I browse the network and go to SERVER it says:
"Windows cannot access \SERVER.... the network path was not found"
HOWEVER when I navigate to \192.168.1.151 with explorer it works fine. What I have tried:
* I have removed all wireless networks and reauthenticated.
* I have set all network configs to the most open possible: network browsing: ON, sharing: ON, homegroup: Off and password authenticate.
* Disabled Norton Internet Security firewall (also on the other two computers)
Again this server is perfectly accessible from all other computers (even a third laptop come to think of it), so it must be something stupid with this one laptop.
ErrorCode 0X80070035 "Network Path Cannot Be Found"?
Dec 14, 2010"Error code: 0x80070035 The network path was not found" when trying to access any network shared drives. Our file server is a windows server 2003 standard edition.This problem occured yesterday on my laptop with OS windows 7 pro. I cannot access any shared folders, shared drives. I cannot access my own laptops shared folders. I can see the device on the network and can connect to my laptop and access files on my laptop from other pc's. I have checked all the services required and they are started, netbios over tcp/ip is enabled, network discovery is turned on, windows firewall is turned off and also tried disabling the antivirus on the laptop but none worked. Also tried the system restore, which did not allow me to log back into the domain giving error " Trust relationship between this workstation and primary domain failed". So had to undo the system restore.
View 9 Replies View RelatedDevice And Printers Does Not See All Printers
May 27, 2011Windows 7 Home Premium 64bit Control Panel -> Devices and Printers show some printers (PDF995 and Microsoft XPS Document Writer) but it does not show my HP OfficeJet 4500. Applications (like IE or Firebird) show it in the list of printer and can print to it.
Edit: I forgot to mention, I am running in the Administrator account and both the laptop and the printer on the same WiFi router. The printer showed up in Device Manager after I clicked Display Hidden Devices (kind of silly to hide devices from the Administrator.)
Teredo Always "qualified" In Windows 7 Ultimate / Teredo Security
Apr 13, 2011I have 2 computers in a homegroup at home (Windows 7 Ultimate 64 bits and Windows 7 Home Basic 32 bits), behind a TP-Link TL-WR740N router (and ZoneAlarm Free 9.2.076.000).
Both computers have Teredo enabled, but the Ultimate one is always running ("qualified"), whereas the Home basic one is mainly "dormant", unless, of course, I try to reach a website which "triggers" Ipv6 (e.g. Test your IPv6.).
Since both computers have exactly the same programs installed (and homegroup file sharing by itself doesn't change Teredo status - on the Home Basic one it remains "dormant" even while I'm doing so), why does the Ultimate computer has teredo always in "qualified" status? Does Windows Ultimate 7 enables this "qualified" setting (even if there's no Ipv6 trigger) by default, maybe due to its unique features (e.g. DirectAcess)?
If not, what else would trigger Teredo?
The second part relates to the first one... I'm not very comfortable with the Teredo service running all the time, due to security reasons... It seems that the process keeps some ports open, and that the traffic is not filtered properly (or at all), by the NAT and/or the Firewal.
So, how safe Teredo really is? Should I worry leaving it running all the time? Or should I try to minimize the potential security risks by finding out how to make it run only when really needed on the Ultimate computer (as the Windows Basic computer does)? Of course there's the "disabling it altogether" option, but I don't know whether it would impact the homegroup or not.
Get The Software For The Web Cam Attached To The Laptop Hp 620?
Sep 28, 2012get the software for the web cam attached to the laptop hp 620. 2mpwebcam
View 1 Replies View RelatedHow To Use 6gb Ram Fully
Nov 8, 2012i have 6gb ram ddr3,but win7 shows 3.4 only usable.what can i do?
View 4 Replies View RelatedDevice Attached To The System Is Not Functioning?
May 27, 2009I am getting this error, a device attached to the system is not functioning, when I try and log in remotely after I have successfully logged in before. Also I get the same error when I try and log in locally.
View 7 Replies View RelatedThumbnails On USB Drive Attached To NAS Not Previewing
Jul 15, 2012From a fresh start up of the computer, I can get my thumbnails to generate any where on my computer, the NAS, or the USB attached to the NAS. However, after a short period (not specific, can be 5 mins or 30 mins), the USB drive attached to the NAS will no longer generate thumbnails, however, everywhere else still does (ie local files or even NAS files).
I have multiple machines, and it happens on this machine only (brand new only 2 weeks old, fresh windows 7 installed only 2 weeks ago).
I am using Windows 7 64bit Ultimate, but so are the other 2 windows 7 machines, and they do not forget to show thumbnail previews after a little while.
- "Always show icons, never thumbnails" from folder options is UNTICKED. - tried all options from here Thumbnail Previews - Enable or Disable - Windows 7 Forums (with everything set to enable thumbnails)
What seems to happen is that it suddenly forgets that thumbnails are enabled, but only for that specific drive. Using the link above, it should always be the first example "EXAMPLE: Thumbnails Enabled in Windows Explorer" but when it decides to stop working it becomes "EXAMPLE: Thumbnails Disabled in Windows Explorer", however, it only effects that one specific USB device attached to my NAS.
It has to be a Windows 7 issue on this machine only, as all my other Windows 7 and XP machines always show thumbnails. As far as I know, all the Windows 7 machines have exactly the same software loaded (I re-formatted them all about 2 weeks ago when the new machine was built).
If I restart the computer all thumbnails are working again until it no longer likes me.
Receive Emails With Jpegs Attached?
Jun 25, 2012I receive e-mails with jpegs attached. When I click on the attachment, it will not open automatically, I have to open Photoshop first.
View 5 Replies View RelatedRandom BSOD Screen And DMP Attached
Nov 5, 2011I'm have a "random" crash, that occurs at different times, sometimes when in IE, othertimes in Word, and other times when doing nothing! Or simply don't initialize. Sometimes the computer crashes but maintain the screen, only freezes all. Other times the BSOD comes. When system re-starts, try the "initialization recovery", but nothing. I have installed (formated) the Windows 2 times (last this week) , it's a fresh install, Windows 7 retail and updated to SP1, x64. Drivers are all updated and all devices have their drivers correctly installed. It's a clean system, with Avira (antivirus) and no overclock or something like. Normal use. I used memtest86 for 10 hours and all it's ok.
View 9 Replies View RelatedHDMI-attached Monitor Not Powering-down?
Nov 29, 2011I've noticed this anomaly now on two of my Windows 7 rigs, one each Ultimate and Home Premium; Monitors that attach via HDMI are not getting the 'power off' message from the OS. The same monitors hooked up by other means [dvi, vga] do power off just as they should per the power plan settings.
View 2 Replies View RelatedNew Router - Can't See Desktop Or Printer Attached
Mar 1, 2011Swapped out a Belkin N Series router with a newer model (3 of the 4 ports were not working). After doing the install of new router, per there directions, My 2 Dell Laptops Can't connect to the Dell Tower (that has my printer attached to it).
Had no problem seeing the desktop when I clicked on "network" on either my work laptop (running win 7 pro x32 or the wifes running vista sp2 x32 home Premium). But Now neither can see the tower.
Nothing else was changed, all setting were set the same. Thought Dells could talk to each other via RF signals, no need for routers.
Can't Boot If USB External Drive Attached
Dec 12, 2009We just bought a WD 2TB My Book Elite external hard drive. When we boot the computer into Windows 7 and plug in the USB cable, the drive is recognized and assigned a drive letter. Everything looks normal--we can access the drive, read files on it, copy files to it, etc. However, next time we power up the computer, if this drive is attached, the computer won't boot. The Dell BIOS splash screen comes up and sits there for a while, then the screen goes black--and absolutely nothing else happens. If we then disconnect the drive and start the computer again, it boots normally. The external drive has the latest firmware and software installed, and we have the most current BIOS installed.
View 9 Replies View RelatedConnecting XP To Windows 7 PC Attached Printer
Nov 26, 2012Have spent hours trying to google and find soultions to getting an XP printer to print via a home network on a Windows 7 PC that has a HP 1022 printer attached via USB. When I started out I could access the XP machine over the network but not vice versa, but can't even see it anymore.
View 5 Replies View Related