Drive Pool
Nov 13, 2009
One of the features that I love about Windows Home Server is the drive pool. No matter how many physical hard drives there are WHS just sees C: and D:. Running out of storage? Just throw in another hard drive.
On my 7 machine I already need to add a hard drive for storage. Is there an elegant method to be able to use that additional hard drive with my libraries so that all new files are saved to the new drive but when I open the library I see all the locations on both the C: and D: drives in one window?
View 0 Replies
ADVERTISEMENT
Aug 20, 2009
From what I can tell its a modem related error, but i physically removed the delphi d40 modem and reformatted, only to occasionally still have the same error (just not as often)
now it only happens while running utorrent.
last time i had this error i made an attempt to DL current drivers for everything w/ driver genius pro. once i installed the program and ran it w/ all the new drivers it worked flawlessly for about a week (no BSOD crashes) but then suddenly they started occurring every hour while operating utorrent and certain websites.
im not at that PC right now but ill be sure to post the exact error message along with the model number of the laptop to see if anyone else is experiencing this.
any ideas in the mean time?
im assuming its due to gateway not rushing to add windows 7 support to certain pieces of hardware, allowing pretty much everything i have right now to be work flawlessly only w/ vista.
View 9 Replies
View Related
May 22, 2011
my laptop has had a variety of problems from viruses which I seem to have got rid of to bsod twice , now i cant get in the pc at all?
View 9 Replies
View Related
Jan 21, 2013
I have a Gigabyte P43 MB. I cannot successfully install Windows 7 or WinXP.It has been giving me different BSODs and getting to different parts of the install before it BSODs. returned it to Gigabyte and they say they could find no problem.Now I get the same thing except it only gets to load files and never gets into startup.I get 0A, 24, 19, C2 BSODs..I have the MB sitting on my bench now, but when I first fully installed it into a case it did the same thing.I have tried this with 2 CPUs, 2 Graphic cards, 2 PSUs, 2 HDDs, and memory right out of my P35 MB. All of the components run fine on the P35 MB.I can boot to Hiren's disc, I can run memory test, I can find no problems - but I can't Install OS.
View 2 Replies
View Related
Nov 8, 2009
I have just built a new computer with the following specs:
When gaming on the computer it will crash and a BSOD will come up saying Bad Pool Caller. Or just a blue screen of death saying there is a problem with your video card. I have reinstalled the drivers for this card and used older drivers however the problem still continues. I have now put my Gigabyte GTX260 in this sytem above and all seems well at the moment plays games and passes tests with 3DMark 06.
Does this sound like a driver or a faulty video card problem??
Also one other thing I have noticed about the disk drive is the tray that opens seems to open a bit then open fully has anyone else experienced this problem before?
Gigabyte GA-MA790XT-UD4P 790X Socket AM3 DDR3
Corsair 650W TX Series PSU
Western Digital WD5000AAKS 500GB
AMD Phenom II X4 955 Black Edition 3.2 GHz
OCZ 4GB Kit (2x2GB) DDR3 1333MHz/PC3-10666
PowerColor HD 4870 1GB GDDR5
Sony AD-5240S 24x DVD�RW DL Internal SATA Black Bare Drive
View 9 Replies
View Related
Jul 7, 2011
I got a new desktop PC. It works fine, but on each startup it gives me the line "Verifying DMI Pool Data". It seems to be part of the normal booting process, but my other PC never does that, and when I researched it on the web I read that it might be a serious error.
The specs of the new PC are these:
Intel Core i7 950 @ 3.07GHz
6GB RAM
Windows 7 Professional 64bit
View 3 Replies
View Related
Jan 21, 2011
I have a 4g sprint card and a DSL connection. I want to pool them together. Each is currently at around 6megs I want to be able to get 12 megs combined. How do I do this?Also unrelated, anyone aware of a way to plug a 4g sprint card into an IPhone (tried searching for adapters couldn't find it)
View 3 Replies
View Related
Jul 26, 2011
after since a few days, my computer has been getting Bad_Pool_Caller BSOD most of the time after i start to resume back my computer after hibernating it.
Im running on a
MS WINDOWS 7 ENTERPRISE 32-BIT SP1
INTEL CORE I5 @ 2.27GHZ
ARRANDALE 32NM TECHNOLOGY
RAM 2.0 GB SINGLE CHANNEL -DDR3 @ 532 MHZ
GRAPHICS
ATI MOBILITY RADEON HD 4500 SERIES
I see other forums stating about needing a minidumps file, cause the BSOD is really interrupting my lessons in school because I'm using laptop most of the time.
View 1 Replies
View Related
Nov 11, 2012
computer keeps getting bad pool caller bsod i think it may be utorrent causing it but i get it some times by going on youtubnot very good with computers i will attatch a dump file
View 5 Replies
View Related
Jun 10, 2012
This has been going on for a few months now and I have tried a number of things. At first I thought it just seemed to happen randomly when I used the internet that I would open a new page and just get an immediate blue screen with the message "BAD_POOL_CALLER".
View 1 Replies
View Related
Oct 23, 2009
now when I switch on the pc, after the white screen and before the boot appear a black screen that say verifying dmi pool data and it stop to this.
For the first time I change the boot priority and boot from the another hard disk and it start. But now when I Boot from any hard disk the message is always the same...
I can boot without any problem from dvd drive or another device. Any solution?
View 5 Replies
View Related
Sep 9, 2011
I pressed something at the start of login once, something like y/n sata to dmos or something im not really sure but i pressed yes and now im getting verifying dmi pool data, update new data to dmi! aswell as a super quick blue screen flash and nothing working,
View 1 Replies
View Related
May 28, 2009
When playing games via steam I occasionally get a crash followed by the error message.
failed to lock vertex buffer in cmesh dx8
According to the FAQ on steam this is caused by a lack of paged pool memory which is reserved for apps like direct3d.
To get round this issue its recommended that you remove a line form the boot.ini which unlocks the page pool memory. The line is /3GB /Userva=2900
Does anyone know where this line is in windows 7 or how I can unlock the paged pool memory as I'm finding the crashes are starting to interfere with my enjoyment of gaming.
View 4 Replies
View Related
May 27, 2009
I have XP installed in my PC.I tried to install Windows 7 by mounting the Windows 7 image as virtual drive.After copying the files the PC reboots.After this reboot my PC is stuck at "Verifying DMI Pool Data".Nothing happens after that.Then I installed my XP again. Please give me a solution to this problem.
View 9 Replies
View Related
Feb 11, 2011
Ever since i did a fresh install of Windows 7 Ultimate x64 I have been unable to resume from hibernate.My laptop is Toshiba Qosmio X305-Q706?
View 1 Replies
View Related
May 7, 2012
i started having this issue awhile ago, but never had much time to try to troubleshoot it, in fact, it went away for a little while...i will play a game (starcraft 2) for maybe 40 minutes or so when the screen will screw up, make a buzzing noise, go the bsod and try to restart the computer. sometimes it will restart without trouble.there's also times where i will exit the game and go to Internet and it will crash then as well. at the blue screen, i have seen these two error messages the most:bad pool caller irql not less or equalreading through others' posts on various sites, i have done the following:updated various drivers, including my videoupdated biosinstalled the new version of nortonran memtest (no errors)it also seemed to me that the machine was running loud, so i opened it up and blew out the dust. after this, the problem stopped for about a month. now its back.i'm going to run memtest a few more times, swapping out the ram, because it sounds like it doesn't always catch stuff the first time.
View 3 Replies
View Related
Jan 23, 2011
Have a toshiba satellite laptop. Whenever I go to certain websites sometimes, I get the 'Bad Pool Caller' error; however when I go to those same websites at other times, the error does not happen. Also this error does not happen with all websites, only a few. What is this error and why does it happen when it does.
View 1 Replies
View Related
May 15, 2012
About 75% (3 out of 4 ave.) of attempts to start / boot results in BSOD right after I enter password to login into my account. The error codes are different sometimes but only one I could catch = "Bad Pool Error". I have added no new hardware. Have tried all I could find for a solution without results. Including Pre-boot sys access 4118, sys file check, full scan for virus several times. all the usual.
View 9 Replies
View Related
Sep 4, 2012
why i am getting bluescreen everyday.I tried to reinstall everything on my end also had a new hardware replaced with the same model and still i am getting the bluescreen error.
View 1 Replies
View Related
Apr 2, 2012
I've tried all I can think off but have not been able to locate the cause for the contant crashes I'm attaching last 5 minidumps and hope you can guide me.
My PC:
OS: Win 7 - 64bit - Home Premium SP1
Intel QuadCore CPU - Q 6600
8 GB RAM
View 1 Replies
View Related
Apr 7, 2012
i've seem to have problems with my pc since this morning. I keep getting bsod, (Bad loop caller). Even when i restart i still get his error. Even when i go to safe mode i still get this error.
View 1 Replies
View Related
Dec 28, 2011
Im always getting this BSOD error. identify the driver that is causing it.Minidumps attached.
View 4 Replies
View Related
Jul 2, 2012
So I just got back from a 3 day vacation, and when I came back I rebooted my computer only to come back to the "Start Windows Normally/ launch startup repair" naturally I chose startup repair, it froze. Tried starting normally, took me back to the same page. So I tried booting in safe mode, took me to the BSOD that read Bad_pool_header. So then I tried to putting in my windows 7 installation disc to see if I could do a system recover from there, but as soon as I try boot up with the disc it takes me back to the same BSOD. I feel completely stuck as I've tried everything I can think of.
View 1 Replies
View Related
Apr 16, 2012
Acer Aspire 4740G. 2 years old. Last 1-2 weeks constant BSOD as per title, and random freezing up, forcing restart. On restart, random issues pop-up e.g. "Windows explorer is not working", "Login services not working (causes me to be logged into a new profile, all settings, icons, wallpaper gone)". The system has run the Memory Diagnostics test. Extracting from the Event Viewer, the results are as follows:
Log Name: System
Source: Microsoft-Windows-MemoryDiagnostics-Results
Date: 16/04/2012 09:09:37
Event ID: 1102
Task Category: None
[code]....
View 1 Replies
View Related
Feb 23, 2012
I keep getting reboots sometimes along with a BSOD crash.Other times it goes to reboot and gets stuck on "verifying DMI pool data".I have Windows 7 Ultimate 64bit booting from a partition E: on drive where other partition is F: for programs and data.[CODE]
View 2 Replies
View Related
Oct 8, 2009
i m on a amd dual core 5200, abit k9n with latest bios, ati 4830, 2gb ram 800mhz (2x1)
i have downloaded from my university Windows 7 x64 version (the free copy for students build 7600) but i have also tryed 2 other versions (rc i think, both 64 and 32) with no success.
first of all, the starting installation page is very slow, after 4-5 minuts on "setup is starting" (advance mode, not upgrade), and at the second step (expanding windows files 0%)
installation crashes with blue screen:
first time i get: bad pool header error
second time i m on another blue screen: "a device driver attemptingto corrupt the system has been caught. the faulty driver currently on the kernel stack must be replaced.."
now i will try the 3rd time to install in "safe mode" and i post new info here.
if u need something more to know for helping me ill provide them as fast as possible.
View 9 Replies
View Related
Nov 6, 2011
I keep getting reboots sometimes along with a BSOD crash.Other times it goes to reboot and gets stuck on "verifying DMI pool data".I have Windows 7 Ultimate 64bit booting from a partition E: on drive where other partition is F: for programs and data.[CODE]
View 5 Replies
View Related
Nov 14, 2011
I started my pc this morning and the screen is stuck on "verifying dmi pool data".My OS will not boot.Recovery disc found no errors
View 3 Replies
View Related
Apr 16, 2012
i have been getting these "bad pool header" and "system service exception" bsods for about a day now (the "bad pool header" one tends to pop up more often then the other btw). i ran a registry cleaner which didn't work and ran memtest this morning and it showed that my memory was fine. the bsods tend to occur more often when i am playing a game or running some program that uses a bit more memory but it also happens when i am just on the internet. on the other hand, last night i did nothing but surf Internet for 3 hours and didn't get a bsod at all. however, since then i haven't been able to do anything for more than 10 minutes (without being in safe mode) without it crashing, and this morning it completely froze until i turned it off. my os is windows 7 home premium 64bit. it came preinstalled from the manufacturer and unfortunately i do not have the install disc. the entire laptop is less than 2 years old and there have been no major hardware changes and i have never reinstalled the os.
View 4 Replies
View Related
Nov 14, 2012
I have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.
View 3 Replies
View Related
Aug 21, 2012
I have a USB external hard drive that I keep all my documents etc on (had it for years)I upgraded from Vista Home to & Home Premium then had to upgrade recently to Professional to run my Sage. Through all these upgrades my ext. drive ran fine. Occasionally the drvie letter would change if I had something else plugged into the USB, this was always easily corected in disk management by changing the drive path.The connection on the case packed up so I had to get the drive put into a new case, now when I plug it in the drive is assigned G instead of F, I tried to change the drive letter allocation in Disk Management but it won't let me as the program still thinks I have a second ext. hard drive which is labelled F. I suspect this has happened because when the usb connection broke the drive was disconnected suddenly instead of a proper eject.How do I get Disk Management to remove the inactive drive - i can't find any obvious way - eject, delete etc are all missing when I click on tools or tasks.
View 2 Replies
View Related
