Drive F Disappearing On Clicking Eject Button - Cannot Get Disk Out
Mar 12, 2012I have a disk in drive F, but when I clicked on the eject button, the drive disappeared. As well, i can't get my disk out of the drive.
View 1 RepliesI have a disk in drive F, but when I clicked on the eject button, the drive disappeared. As well, i can't get my disk out of the drive.
View 1 RepliesSo I have a Dell studio, I use to run Ubuntu 10.04 on there and I re-installed Windows 7 on there. The problem is my disc drive has a button on the key board to eject the disc cause my I don't have the disc tray I have the slot on the side where you just slide the disc in, since I have re installed Windows 7 it has not worked so I was hoping someone could tell me how to set the button up to where it is the eject button. I know I can right click on the disc in computer and click on eject but if possible I would like by eject button to work properly.
View 1 Replies View RelatedDoes anyone know how to make an eject button on the desktop for the CD Burner? My CD Burner's button is recalcitrant and I'd prefer not to have to start up my Nero to eject the disk.
View 5 Replies View Relatedim trying to shut down my computer by clicking on the shutdown butten but nothing is happening, i also clicked on the restart butten still no results but when i hit the hybenate button it hybenates please tell me how to fix this problem
View 2 Replies View Relatedwhen i click the finish button there shows "the operation you selcted will convert the selected basic disk to dynamic disk."
View 1 Replies View RelatedI have been having a Windows 7 issue for a week now. Last week, my desktop computer had the "blue screen of death" and it sort of fixed itself and rebooted, and it seemed to be working again. However, in the past 2 days, everytime I turn on the computer, and then when the desktop pops up, and I click the start menu button, the whole desktop freezes and I can't click anywhere else. I tried going on safe mode and do a system restore, but the choices of time to reset my computer was still after the blue screen of death.It's really frustrating, because I can't turn my computer off properly anymore cause it just freezes, I can't backup my files, because it's frozen, and I can't backup in safe mode.
View 5 Replies View RelatedYou search google, click on a result, and then either backspace or click the back button, but instead of going back to google, you stay on the current site. Why does that happen, and is there anything to do about it?Using IE 8 32-bit in Windows 7 64-bit here, but have been seeing this problem for a long time with previous versions.
View 4 Replies View RelatedWhen i try to saefly remove my external hard drive i get the "cannot stop right now because something is using it,anybody know how i can find out what is using it and how i can sort it?
Whenever I try to eject a certain external hard drive using the little icon in the task window, I get a message that it is in use. I am very careful to be sure it is not in use but still get the message. This is a data storage disc. I am not aware of any programs on it that may be running in the background. Is there a way to examine a disc to see just what is being used on it at any given time?
View 9 Replies View RelatedI've got a Seagate Free Agent Pro external drive (currently connected via eSATA), which solidly refuses to disconnect from the system, using the "safe disconnect" dance.
Whenever I try, after a pause I get the error message: "This device is currently in use. Close any programs or windows that might be using the device, and then try again." I have tried closing just about everything down, but the message still appears.
1) Is there a way to tell if my drive is actually in use? Can I tell which program is using the drive?
2) Can I force-disconnect the drive in such a way that any pending writes are completed? (i.e., not just disconnecting the cable and hoping for the best)
Before you ask, I did look for device-specific drivers on Seagate's web site. No luck. There's some disk management utilities to help manage backups and/or syncs, but no drivers.
I got a new Seagate 500GB HD (sorry about the wrong thread title). For the first two weeks or so, I could eject my HD through "Safely Remove" but since then I get the usual "Generic volume is still in use" message, inspite of closing all processes that might possibly be using it.I keep the HD connected to my PC virtually all the time, even when I shut down and reboot. But every now and then, I need to disconnect it. And to do that, I have to shut down the computer first and then disconnect it.Whenever I update Windows, I see that a temporary folder is created in the HD while the updates are being downloaded which has led me to think that a process uses the HD but I can't find out which one it is and how to terminate it properly.There are no problems when I use the HD in other computers.
View 5 Replies View RelatedMy flash drive on windows 7. Says a program is using it. I've tried to see what programs but I don't see anything. Does this happen often or is it just my computer or usb port?
View 8 Replies View RelatedI was running Windows Vista 32bit on my Dell Inspiron 1545. I then decided to install Windows 7. I installed the 64bit version. Everything seemed ok apart from my CD/ROM drive. It works now and again but will suddenly disappear. I have seen people saying clean it but I dont think this is necessary as it worked a treat on Windows Vista. I tried to burn a disc in Windows Media Player but it says "connect a burner & restart the player". I have tried deleting the filters in the regedit. I have this morning re-installed Windows 7 but instead installed the 32bit version
View 9 Replies View Relatedmy Cyborg Rat 7 Doubleclicking instead of leftclicking once. I just got it today.
View 3 Replies View Relatedi cant access folder by direct clicking ,only by means of right clicking.but their is no message found.
View 3 Replies View RelatedI have 3 drives in my system.Boot Drive2TB WD Black Caviar3TB Hitachi DeskstarThe 2TB will come & go. Sometimes its there, sometimes it's not. I have replaced the HD (it used to be a Hitachi), replaced cables, changed drive letter and even replaced the motherboard to no avail.
View 2 Replies View RelatedOk I have a Dell Inspiron 1545 and my dvd drive keeps coming and going. The drive is a TSST TS-L633B 12.7 SATA Trayload 8X DVDRW. The pc is a dual core pentium with 3gb ram. When loading a dvd the drive will show up and then shortly disappear. Sometimes it will stay longer but if i pause a dvd it will disappear again and i have to either reboot or open and close the tray to get it to recognize again. I have removed the driver from device manager and i have tried updating the driver with the latest windows 7 drivers from dell with no luck. When i try to flash the drive with the latest the driver it will be there but when opening the flashing program is disappears again. I have even gone the route of getting a replacement drive from dell and it does the same exact thing.I have gone and tried the upperfilters and lowerfilters and that did no change either. I have checked the bios and the drive shows up in the bios.
View 9 Replies View RelatedI upgraded from Win XP to Windows 7 64 bit about a month ago (I did a clean install as I've always had issues with in place upgrades). My machine has four hard drives total, two internal SATA drives, and two external USB drives. For some reason my secondary internal drive, a WD 500 GB SATA drive (nothing fancy), keeps disappearing randomly while windows is running. This started about a week ago, it ran ok for the first 2 weeks or so.The drive comes back fine and dandy if I completely shut down the machine and then boot it back up. The drive stays until some random moment when Windows doesn't see it anymore. Now, if I do a simple Restart the drive doesn't show up, ONLY after I shut down completely, and push the power button back on, does this work. There is nothing in the System logs, no error messages, nothing, it just vanishes and is completely random.
View 4 Replies View RelatedI have a custom machine that I just recently built a few months ago. Last week, I decided to upgrade the mobo so that I could have more ram slots and a second PCI Express slot. I swapped out the mobos, booted the computer, and everything was working just fine. The only problem is that I'm running Windows 7 OEM and I've heard that you can run into problems when swapping out hardware. My computer was working for about 24 hours after installing the new mobo but at one point the other day the computer just shut itself down. I went to boot it back up and all that popped up was BIOS. I inserted my Windows disc to try and repair my system and I came to find out that my Operating System, along with everything on the Hard Drive was GONE. I have never heard of such a thing happening. So I reinstalled 7 and basically had to start over from scratch. Another day goes by and the same thing happens. This is now the second time I've had to reinstall Windows 7. My computer is running fine now but I am afraid that this is going to happen again so I'm reluctant to put anything on my hard drive until I know this issue is resolved. I contacted MS but they aren't much help as I only have the OEM version of Windows.
View 1 Replies View Relatedmy hitachi external drive 3 tb disappears from My Computer every time I shut down the pc(windows 7).To reconnect, I have to unplug its power supply and then plug it back in.
View 3 Replies View RelatedI have a Seagate external drive hooked up. I back all my data up to it. The other day I accessed it and to my shock ALL FILES were gone. Poof. We're talking thousands of files. Weird though, the folder structure/tree was still completely in tact!! Every folder is there, it's just the files that are gone. I used Recuva This and got about 60% of it back. The other 40% is gone forever I guess. Very sad as there were about 500 family images that we lost.
Anyway, I add more files to this drive about three days ago to test. Sure enough they TOO are gone now but their folders are still there! Ugh! Important to note these files are NOT going to the recycle bin for some reason. They are just being zapped from the drive somehow.
SOMETHING/SOMEONE is making my files disappear. This drive is NOT being shared on the network. I ran scan disk and no errors were found. I have run numerous anti virus and spyware removal software and only found some spam trojans. Nothing of the malicious variety (that I know of). I also ran SeaTools and the drive seems fine. I have another USB drive and it is also fine and files are NOT disappearing from it.
Here is my HJT log if it helps.
Has anyone ever heard of this before?
i'm looking for an external hard disk with a power off/on button ?about usb2 or 3 , i don't mind.i would like a button to power on and when i don't want to use a power off
View 6 Replies View RelatedNot sure when or why it happens but about 5 shortcuts I have on the desktop to mapped drivesfolders will disappear. Everything else is fine. X64 7264.
Any ideas?
Problem Description: I boot up my PC, everything works fine, after an hour or so, my D (Secondary internal drive) disappears and the system has to be rebooted to find it again. Note, this happens whether or not the drive is currently being used.
Note: The drive always appears in the BIOS.
Drive: Seagate Barricuda 7200.11 750GB
Serial number: 9QK1GAKJ
Disk model: ST3750330AS
Steps I've taken to try and solve the problem: Initially I thought the drive was simply being unmounted, so i attempted to mount it again using disk management. However the drive won't appear there either, nor will it appear in system information or Seatools. A disk rescan won't reveal it either. I later, tried to use SeaTools to find out whether or not there was something physically wrong with the drive, but the drive passed all the tests. Peculiarly enough, when the D: drive disappears it also disappears in Seatools. Thirdly, I checked my power settings to make sure i hadn't had some timer for the hard drive to shut off. Fourthly, I checked the bios settings to make sure there wasn't some sort of power policy conflict there as-well. Lastly, I scanned the disk for errors with the windows (with both options to recover bad sectors and fix errors checked) and rebooted. (The problem still occurs) I will be trying to turn off the bios's plug and play settings next, and see if it will work better if i should let windows handle the device detection.
A computer has a 1TB drive as the boot drive (C. It had 800GB of files on it. When the user booted recently, most of the files were deleted from the hard drive. I installed the drive in another computer, and the files show up as deleted. The computer passes malware and virus scans without issue.
I'm currently using Recuva to try to recover the available files (about 80% of the deleted files appear to be recoverable, but some critical files are not.) The recovered files are being saved to an external USB drive.
The only time I've had this problem before was corrected with chkdsk. I'm very cautious about doing anything with this drive until I have recovered all that I can manually.
It passed Spinrite with no issues. The computer is Windows 7 Home Edition 64-bit.
I am running windows 7. on my hdd i have two partitions. both work fine except when i view the space used on partition D: it shows i have used up 178 gig when windirstat only show i have used 124 gig. please can somebody help me find the other 50 or so gig
View 1 Replies View Relatedfew folders in my external hard drive are missing. I am running a scan and hopefully it'll fix, but it takes so long to scan the hard drive as it's a 3 TB hard drive.
View 1 Replies View Relateddid system restore no change to ntfs local disk.local disk changed to ntfs. cannot open local disk C:no windows action center, not working all including:Device Manager,Remote Settings,System protection not format.is there any other way except reinstallin OS again.My os is win 7 ultimate..
View 4 Replies View RelatedMy current problem is that it occasionally gives off a clicking noise, I am assuming that the problem is the HDD because there is nothing else that's moving in the computer (besdies the BD-ROM, but it doesn't count). I look onto the event viewer and every time this happens it shows an error in the log files. [code]
View 5 Replies View RelatedWhen right clicking on an icon on my desktop I get the "explorer. exe - No Disk error message that says "There is no disk in the drive. Please insert a disk into drive DeviceHarddiskDR2". I'm left to choose "cancel, try again, or continue. clicking any of these buttons 3 times and the error box goes away. I goggled the problem and it told me to make sure dragging and dropping was enabled and it is.
View 3 Replies View RelatedI only learnt about this a couple of weeks ago!If you want to make the Aero Peek button at the far right of your Taskbar into a plain and simple Show Desktop button:Simply right-click the Aero Peek button and un-check the "Peek at desktop" option. Et Voila!! That's it!
View 1 Replies View Related