Display Goes Off After Some Time And Shows No Signal?
Aug 1, 2012
I have been facing a wierd problem recently. My desktop monitor turns off itself after a few minutes but the CPU works, I can hear the fan running and see the lights blinking. One thing I noticed is that when the monitor turns off, the Orange light on the CPU stays on which normally just blinks. My PC works normally on safe mode, but the worst part about safe mode is that I cannot work on my software CorelDRAW. Can this be the SMPS problem? because recently my mouse and keyboard inputs were not working because of which I got a USB keyboard and mouse. I have recently installed Windows 7 64bit, but I think that should not cause the problem as I have worked with 64bit Windows before on the same machine.
PC configuration -
Intel Core 2 Duo 4500 @ 2.20Ghz Processor
ASUS P5QPL-AM Motherboard
3GB RAM
No Graphic Card (Maybe inbuilt, not sure)
1TB Hardisk
View 3 Replies
ADVERTISEMENT
Sep 10, 2011
Using a Sagent SBT TVFM card connected to a Dish Network Dual Receiver as a 2nd TV connection of Antenna, channel 21. Receiver is an HDTV for 1st TV only, so taken from 2nd TV connection, not HDTV. Under XP, using Sagent's software, set to Antenna, channel 21, receive TV fine. However, under Windows 7 Media Center, set to same, receive a "No Signal" Error.However, if changing channel either one up or one down and back to 21, TV display comes on for about 10 seconds after which it goes back to no signal.Have updated the driver for this card to the latest Windows 7 driver, using Driver Agent.
View 1 Replies
View Related
Sep 15, 2012
I am facing this problem, mostly while playing games and sometimes even when operating computer normally. Earlier I used to get BSOD but now it comes rarely. I tried almost everything but wont able to solve this problem:
- Formatted my computer
- Changed OS
- Reinstalled OS
- Even changed my monitor
View 4 Replies
View Related
Aug 10, 2011
I use IMVU, a virtual world which crashes after about 2 minutes. It used to be ok, but now every time it crashes it says, NO SIGNAL and D. SUB comes up.
View 1 Replies
View Related
Nov 1, 2011
I have been having troubles with my display port monitor, and I just realized that the monitor is picking up 1923x1080 60hz (thats what the HP settings say on the monitor) but according to Windows its sending out 1920x1080. ATI Radeon 5770, I don't have CCC installed because of previous issues, any ideas why I'm getting such an odd resolution?
View 6 Replies
View Related
Jul 15, 2012
I am pretty decent with computers but not an expert. I am having a little trouble with my home theater PC display flickering. My video card is a Radeon HD 6900 and the drivers are up to date. I have the HDMI out of my PC going to an Onkyo 7.1ch HT-R590 receiver and it's output going to my LG 42" TV. My OS is Windows 7 Ultimate X64.The system used to work perfectly fine but over time the display started to flicker at random times. I tried to hook my PC directly to my TV and it works perfectly fine, so I am 100% certain the problem is in the receiver. I did a bit of research and it appears to be a problem with my receiver over heating.
Now, if I run my HDMI to my TV, I cannot use 7.1ch surround sound. (Even after playing with Audio Return Channel) If I run optical to the receiver, my video card only puts out 5.1ch surround sound for some weird reason. So I did the next obvious choice, I ran a DVI to HDMI to my TV for video and HDMI to my receiver for audio. I thought it would trick it into thinking there was two displays but this does not work, I do not get audio. was wondering if you guys knew of any utilities that would allow me to output audio on one HDMI stream and video on my DVI port. I did a lot of looking around and it looks like DMCA calls for HDMI to be encrypted and you can't separate the stream. Or would I just be better off getting a separate audio card to connect to my a/v receiver
View 4 Replies
View Related
Mar 22, 2011
ok so i have a desktop display(chuntex) for my win xp computer but then i upgraded it to win 7 ultimate now every time i switch users or log off it will say no signal but if i shake my mouse around for awhile it will come back on and work fine (but slow but i think thats cuase my hard drive is really full)
View 3 Replies
View Related
Nov 1, 2012
Just recently was doing some additional overclocking on my PC and had this happening just now. Whenever I resume my session out of sleep mode by hitting either a key on my keyboard or mouse, my PC fires up, but the display doesn't come back, almost as if I had pulled out the cable from the monitor. The PC is running normally as this is going on, and the only way for me to get my display back is to do a hard reset.
View 3 Replies
View Related
Oct 20, 2011
I accidentally deleted all the display drivers off of the computer, the computer restarted and now the computer has just seemed to screw up completely. The computer turns on however I get no signal from the monitor, it's on but nothing on the screen so i cant get into BIOS or anything.
I've tried:
- Using different cables
- Taking out and putting the CMOS battery in
- Using different Monitors
View 15 Replies
View Related
Dec 8, 2012
started recently, when I boot my PC, the screen shows message: no signal and screen stays dark.However, in the background W-7 is loading, but in order to get the video functioning, I must restart the PC, turn off the screen, wait till W-7 loads somewhat and (like after 10 sec.) turn the screen on and everything is OK.Monitor is NEW Video card too, I tried with a second one, same problem...My question is, is this W-7, main board, or something else related?
View 3 Replies
View Related
Feb 9, 2012
I just bought a Netgear WNA3100 wireless usb adapter for my HP Win 7 64 bit laptop. I have been trying for 2 and half days to figure out why my speed is slow, why i don't have a good signal, and/ or if I do have a bit of a signal to my luck, why my signal comes and goes. I don't have internet at home at the moment because I am trying to save up to go to school. I am picking up a public business signal from a block away (which I have asked for permission to use), but I only am receiving not much of a signal with the Netgear usb wireless adapter.
View 3 Replies
View Related
Dec 25, 2012
In Win 7 the Tooltip (in the system tray) notifying a new mail appears for hardly a second or two.
How can I increase the display time
View 5 Replies
View Related
Dec 21, 2009
I have an HP Pavilion dv4 and i noticed that when i move the mouse cursor over the battery icon in the system tray. It only displays percantage of battery, not displays the time remaing of how long my battery life is. So, Is there a setting somwhere or something I can do to make it appear?
View 6 Replies
View Related
Sep 26, 2012
Is there a windows 7 gadget for controlling the display time out?
Getting tired of going right click > personalize > Screen Saver > Change Power Settings > Change Plan Settings > Then changing my screen time out from 10 minutes to x amount of time for watching movies.
If you know of any and can provide a link I would be much obliged.
View 1 Replies
View Related
Jan 11, 2011
I was stupid enough to manually delete my acronis files when I couldn't uninstall it the ordinary way.
Now windows 7 gives a short BSOD after logo and computer restarts. Startup repair doesn't fix the problem, neither from my windows 7 usb or from laptop, I have tried it several times.
I don't have any system restore created. I don't have any system image either to restore to either.
I really don't want to do a clean install again and wanted to try to do a repair upgrade, the problem is I can't boot into windows to begin with, and this seems to be needed to do a repair upgrade. When I try to do it from the USB it says I need to boot into windows first.
Is there a way to start the repair upgrade without having to boot into windows?
When I press F8 I don't get the options of safe mode, probably because I set the "time to display list of os to 0". Since I can't boot into windows 7 I can't change this above 0. Is there a a way to set this time above 0 from command prompt from my windows 7 installation usb?
View 9 Replies
View Related
Feb 4, 2010
How to Change Time to Display Operating Systems at Boot in Windows 7 ?
View 0 Replies
View Related
Jan 22, 2012
I had windows vista 32 bit earlier. Then I got windows 7 professional upgrade in trial period. I didn't notice how it happened. Of course it must be my mistake. Now when i boot from windows 7 it shows 64 bit and in vista it shows 32 bit. The system asks before booting which one to choose. It's today only that I have installed but I am not facing any problem as such except that i need a product key within 30 days. Should i leave as it is or uninstall vista somehow. Would i be able to reboot my system using the 32 bit vista CD?
View 5 Replies
View Related
Apr 26, 2011
About a month after I started using it, the Say the Time clock program I bought stopped launching the management menu when I right click the date/time field in the task tray (notification area).
Therefore, I can't use or edit the program. Neither the touchpad nor the cordless mouse works.
Other than this problem, my computer works great. Every single item that's meant to be right clicked works for me.
Is there a way I can generate a log to show the software manufacturer (Provenio) that it's their problem and not mine? I am a novice user but I can follow instructions. However, I don't want to put my computer at risk if I make an entry error.
I've been using computers for 18 years and I've never had this problem until I bought this software and used it for about a month.
I just wanted a conclusive way of putting the ball back in the manufacturer's court.
View 5 Replies
View Related
Apr 23, 2012
I spilt some water on my laptop a few days ago but fortunately it's completely dried out and working perfectly.... apart from this minor (but important) issue.
Problem: the system time does not stay correct. Even after manually updating the BIOS time and also even after manually syncing it with the various servers available under the time options.
Fix: set the internet time sync interval to every minute rather than its default setting? How do I do this?
P.S. This couldn't be a CMOS battery issue surely because even when the system is on and plugged in the system time still deviates from correct. (I assume the CMOS battery is only used when the system is powered off.) If I need it replaced, how does that sit with my Dell hardware warranty?
View 9 Replies
View Related
Jan 14, 2012
So I bought a new desktop computer about 2 weeks ago and ever since I got it, it's been freezing (locking) up on me at random times. I currently use Windows 7 64-bit. I put in a new graphics card and new memory sticks just the other day and I got the same freezing problem. It's very random. I can be surfing the web and the next thing you know, the whole thing freezes up. I can't move the mouse. Can't do CTRL ALT DEL. Can't do anything. Seems as if the whole computer locks up. The only way to restart the computer is by manually holding in the power button for a few seconds. So since I replaced graphics card and installed new memory, I was thinking it may be something else causing this.
View 12 Replies
View Related
Jul 29, 2012
I've changed the setting of maximum processor state on battery from 100% to 50% to save battery. But the setting resets to default 100% time to time. I don't know why this is happening.
View 4 Replies
View Related
Nov 27, 2012
Once in a while I find that the time zone moves from GMT to Pacific Time.Has anyone any idea what would cause this, new CMOS battery fitted, which ever time zone shows the time is correct for that zone. Checked the BIOS and that also changes.I dual boot two Win 7 installations.
View 5 Replies
View Related
Feb 23, 2012
I have an issue with my P8P67 PRO (Rev 3.1). Mouse but mainly keyboard (both Microsoft) are not detected during the cold boot from time to time, i suspect the BIOS is the one to blame i have the latest version, what can i do?Both are USB.When i turn on the PC from time to time a long beep takes place and a message during posting (no keyboard detected). Sometimes happens sometimes not. PS/2 ports didn't work for me, when im using them NOTHING gets recognized (and yes i turned off the PC before plugging them).
View 9 Replies
View Related
Nov 19, 2009
the display/monitor uses the generic driver for display and it is 1024×768 or 800x600 but it looks very odd it should be bigger because my screen is bigger. I have a acer monitor but is there something I can download to fix the display size?
View 3 Replies
View Related
Sep 22, 2012
Windows 7 64 turns off the monitor 1 signal after startup. At login, it powers off monitor 1 and powers on monitor 2. Windows 7 behaves as though dual display is working even though monitor 1 does not display. It's the same for single display, the monitor will not work on cable 1 except at startup.Both 'Extend these displays' in Windows Screen Resolution and 'Extend' in the Nvidia Control Panel is selected. And changing which one is primary does not turn on monitor 1. Nor does switching the position of display 1 in either (ex.left/right/top/bottom).GeForce 8400 GS; Dual Monitor Solution 59 pin (DMS-59) to 2 VGA adapter -tried two of these adapter cables.atest Driver: 306.23 - installed a clean reset install of the latest Nvidia driver released last week.Same Resolution: 2 of the 4 monitors I have tried have the exact same 'recommended' resolution (1280X 1024), both 60Hz, and even chose 16 bit color for both instead of 32 to reduce resources.
Linux worked: Dual display worked immediately when I tried it in Ubuntu 10. So, it's not the hardware. It works in Ubuntu 12 too but not properly -it won't transfer windows across displays. My Windows 7 64 is an upgrade from Vista 64. One person in another forum with the same problem resolved theirs by reinstalling Windows 7. But another got the same problem only after a fresh clean install of Windows 7 64 with the same GeForce 8400 GS and DMS-59 when it had previously worked in Vista. Dual Monitors - Only One Works at a Time
View 5 Replies
View Related
Nov 6, 2009
I loaded Windows 7 three computers, 2 desktops and 1 laptop. My Dell XPS is the one that keeps flashing a black screen from time to time. It seems like it is thinking for a few seconds but when this happens it is like my monitor turns off.
View 2 Replies
View Related
Nov 6, 2011
I've been having this issue for awhile now. When I try to do multiple things at once Windows seems to freeze for minutes at a time.I am running stock settings on all of my hardware so Im confused to what could be happening. [code]
View 8 Replies
View Related
Nov 11, 2012
I'm trying to connect a TV to my laptop and want to use my TV as the second monitor.I'm using a brand new VGA cable and the laptop is picking up the TV fine, I can change resolutions, extend etc but the TV just says 'No Signal Through PC'. I'm not ruling out that I've been unlucky enough to buy a dodgy VGA cable but I don't have another to test it with here.
View 9 Replies
View Related
Oct 10, 2011
I tried to hook up my hdmi cable from my computer to my lg hd tv, but i get no signal, i tried detecting the tv but nothing came up.
View 9 Replies
View Related
Jul 10, 2012
I just bought a new pc :
Intel quad core i5 3450 3.1 GHz socket 1155 Ivy Bridge
mobo AsRock H77 PRO4/MVP
psu XFX Pro 550W
8gb ram Corsair Vengeance LP
HD WesternDigital Caviar Blue 500gb
Samsung DVD
win 7 64 bit
Monitor: Dell U2412M 24'' 16:10 1920x1200px
I attached the monitor via dvi cable and I'm using the integrated graphic card (Intel HD2500) My problem: yesterday the power went out (without problems for me, because I've got an UPS) but after this, when I turn on the pc, after booting (after windows 7 logo ) I got the message ''enter power save mode" on my screen and then it entered in sleepmode because there isn't signal
If I attach the vga (analogic) cable, there is signal and the pc works fine ...there is signal also with dvi cable in safe mode (F8)
I tried to boot another pc (with windows XP) to my screen with the DVI cable and it worked perfectly ...so I do not think it's a problem of DVI cable or a problem of the monitor
But If I attach a dedicated video card (I have a Radeon HD 5450) and if I leave the DVI cable attached to dvi output of the integrated video card (Intel HD2500) now there is signal after booting, but there is no signal during booting (till windows logo) ...the opposite!!
ps I installed the latest drivers of Intel HD2500 (version 8.15.10.2696)
pps if I use DVI cable with the dedicated video card (HD 5450) there aren't problems, so I think I'll use this card (or another dedicated vga) ...but I want to understand what's the problem with integrated video card
View 1 Replies
View Related
Jun 18, 2012
Alright so it worked when I left to go pay a bill. Come back and it has no signal. I tried the PC on my TV to see if it worked and it does no problem, so I know the PC is not at fault. Tried a DVI cable and a VGA. Tried restarting and powering off everything.
View 3 Replies
View Related